Used Pbt 25 for sale (14,863)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Distance from pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system Fpsdpfxozqunhe Adrok - Tool holders on the tool changer External Reference: Hanon - Lot 1

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 12,710 h, load capacity: 300 kg, fuel type: electric, construction height: 1,820 mm, drive type: Elektro, tractive force with load: 25,000 N, construction width: 1,300 mm, Tractor Transmission: Electromechanical Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 6.50-10 Rear tire type: Superelastic Rear tire size: 7.00-12 Battery voltage: 80V Battery Ah: 930Ah Battery manufacturer: SBS Battery type: PzS Battery year of manufacture: 2019 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment has been inspected by our workshop and is FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing at favorable terms are available upon request. We will gladly provide you with competent and detailed advice on our vehicles. Front work light, heater, full cabin, CE certificate, special construction, exterior mirrors, windshield wiper, single-pedal control, seat. Fpsdpfezq Ikcex Adrjk

Condition: used, Year of construction: 1995, functionality: fully functional, Press platen (working area) 2500 mm × 1300 mm Fodpfxex Ezpwe Adrjpk Maximum workpiece (panel) length 2500 mm Maximum workpiece width 1300 mm Workpiece thickness (typical operating range) min ~ 12 mm, max ~ 50 mm (for standard configuration) Total pressing force / pressure capacity up to ~ 90 tonnes (depending on configuration) Heating / Heating plates thermal-oil heated platens; working temperature up to ~ 120 °C (in heated-platen version) Power supply / Installed power (some listings) earlier listing cites ~ 5.5 kW for cold-press version. 6 vertical cylinders (for platen pressure) in some full-spec versions.

Condition: used, Used Becomix model RW30CD stainless steel process vessel. Approximate 2-25 litre working capacity (product dependant). Unit has clamped dished top head and welded conical bottom head. Internal rated 29psi (2 bar) maximum allowable working pressure at 273 deg.f. (133 deg.c.) and 15psi (FV) maximum allowable external working pressure at 41 / 273 deg.f. (5 / 133 deg.c.) Minimum design metal temperature 41 deg.f. (5 deg.c.) at 29psi (2 bar). External stainless steel jacket rated 58 psi (4 bar) maximum allowable working pressure at 41 Deg.F. (5 deg.c.) to 306 deg.f. (152 deg.c.) Unit has top mounted agitator with electric drive/gearbox and bottom entry homogenizer with electric drive. Unit mounted in a stainless steel mobile frame. Click on the link below to see a video of the machine running. Fpodpfxsyhd Iye Adrok

Condition: used, Year of construction: 2005, Max. pressing force 80 t Max. length 2500 mm Stroke 200 mm Machine weight 5750 kg Fpjdozdf D Uopfx Adrek

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chucks Fpsdpfx Adszp Hpzerjk -Jaw width: 25 mm -Dimensions: see photo technical drawing -Overall dimensions: 80/75/H55 mm -Total weight: 2.2 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard Fpjdpfx Aezp Ehiodrsk -Jaw width: 25 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/75/H70 mm -Total weight: 3.0 kg

Year of construction: 2004, condition: ready for operation (used), Built in: 2004 Fpsdpjd N S Adefx Adrjk Format range width: 200-420 mm Length: 200-420 mm Height: 30-400 mm Speed: bundles/min 25 Pakete/min Width of film: max 550 mm Film thickness: 12-80 mµ Diameter of film reel: max 350 mm

Condition: excellent (used), functionality: fully functional, conveyor belt length: 2,250 mm, conveyor belt width: 250 mm, overall weight: 70 kg, power: 0.18 kW (0.24 HP), type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, input current: 1 A, Total length 225 cm (150 + 75 cm) Fjdpfx Aozr Indjdrjpk Width 25 cm Adjustable conveyor belt height

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,400 mm, total length: 1,000 mm, total height: 950 mm, overall weight: 195 kg, input voltage: 220 V, power of feed motor: 1,100 W, secondary voltage: 380 V, number of rollers: 7, Equipment: CE marking, documentation/manual, emergency stop, We produce the “R-PRO 25” Standing Seam Metal Roof Machine with the highest precision on the latest technology CNC processing machines. With the user-friendly, strong, durable and robust “R-PRO 25” Standing Seam Profiling Machine, you can perform your standing seam applications in a quality-oriented manner. As REIS STANDING SEAM TECHNOLOGIES; we always support our customers with spare parts on stock, from production to assambly, from sales to technical service. MAXIMUM MOBILITY AT LOW COST There is no need for large, difficult to carry and costly standing seam roll forming machines, when there is a "R-PRO 25" standing seam machine. With our portable standing seam machine, high precision standing seam panel production is possible without any length limit. QUALITY and TRUST – REIS STANDING SEAM TECHNOLIGIES Every manufactured “R-PRO 25” standing seam machine goes through delicate tests Easy maintenance Fpsdpfx Adehpuhtsrsk CE Certificate EU Attestation of Compliance Certificate ISO 9001 DIN EN 349 DIN EN 1037 DIN EN ISO 12100-1/2 DIN EN 13849-1 DIN EN ISO 13850 DIN EN ISO 13857 DIN EN 14121-1 DIN EN 60204-1 2 years of warranty Strong management. Loyal, highly trained team. "R-PRO 25" Standart Features - Standard standing seam height 25 mm - Weight: 195 kg - You can transport with small cars - You can lift it to the roof easily - You can seperate it to four pieces for carrying easily (Standart) - Cabled remote controller (Standart) - Emergency stop button (Standart) - Forward and backward button (Standart) - Material width adjusment (250 mm – 700 mm) (Standart) - Wheels (Locking feature) (Standart) "R-PRO" Optional Features - Ribbing Attachments (Optional) (R-Pro 25 Plus - R-Pro DUO - R-Pro MAX) - Dijital Encoder (Optional) (R-Pro 25 Plus - R-Pro DUO - R-Pro MAX) - Circular Saw (Optional) (R-Pro 25 Plus) - Manual Guillotine Shear (Optional) (R-Pro MAX) - Sliding Shear (Optional) (R-Pro DUO) Please contact us for more information and prices...

Condition: ready for operation (used), Knoll KTS 25-38-F-G screw spindle pump, 200725147, serial number: 333422, used, in like-new condition, 100% functional, scope of delivery as shown in the photos. Fedozp Az Hjpfx Adrepk

Condition: excellent (used), Year of construction: 1992, Tilting spindle moulder with sliding table Manufacturer: Martin Model: T25 Year of manufacture: 1992 Tilting range: -5° to +45° Height and angle adjustment: Electric Fodpfoy Ahplex Adrjpk Spindle diameter: 30 mm Power: 5/6 kW Spindle speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Reversible spindle direction: Yes Motor brake: Yes Right-side table extension with pull-out stop Left-side table extension with sliding table Sliding table for slotting operations Slotting guard Haffner feed unit with 3 rollers – stepless adjustable Weight: Approx. 1,500 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2000, FEMCO DURGA 25 E LATHE CNC FANUC O-T 2 AXES ASA: 6" Fpjdexn Tawopfx Adrok NEW SELF-CENTERING CHUCK! BAR CAPACITY: 52 mm AUTOMATIC TURRET WITH DOUBLE DISC, 12 + 12 POSITIONS HYDRAULIC TAILSTOCK CHIP CONVEYOR REFURBISHED

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 6,080 h, load capacity: 2,500 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 2,595 mm, fork length: 1,200 mm, empty load weight: 3,800 kg, total length: 2,640 mm, drive type: Diesel, construction width: 1,150 mm, Diesel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Technical condition: normal Front tire type: Superelastic Rear tire type: Superelastic Side shifter, 3rd valve, rear work light, front work light, overhead guard, windshield, load guard, impulse control, CE certificate Fsdpfjzpb Niox Adropk

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Fpjdpfx Adottc Uaorok

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 7,950 h, load capacity: 2,500 kg, lifting height: 5,390 mm, free lift: 1,720 mm, fuel type: electric, mast type: triplex, construction height: 2,475 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Fsdpfx Adezt Dvaerjpk Mast type: Triplex Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 620Ah Battery type: PzS Battery year of manufacture: 2018 Battery condition: 80 - 100% Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. Side shifter, fork positioner, 3rd valve, 4th valve, front work light, safety light, joystick, LED.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 3,850 h, load capacity: 2,500 kg, lifting height: 5,190 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,375 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Fpedpfxezt Du Ao Adrjk Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 620Ah Battery type: PzS Battery year of manufacture: 2019 Battery condition: 80 - 100% Description: Overhauled, serviced and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, safety light, joystick, rotating beacon.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 960 h, load capacity: 2,500 kg, lifting height: 6,040 mm, free lift: 2,100 mm, fuel type: electric, mast type: triplex, construction height: 2,725 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Fedozt Dupspfx Adrjpk Mast type: Triplex Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 80V Battery Ah: 620Ah Battery type: PzS Battery year of manufacture: 2020 Battery condition: 80 - 100% Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, safety light, rotating beacon.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 6,085 h, load capacity: 2,500 kg, lifting height: 4,890 mm, free lift: 1,650 mm, fuel type: electric, mast type: triplex, construction height: 2,275 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Fsdezt Duiopfx Adropk Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 80V Battery Ah: 620Ah Battery manufacturer: 94% remaining capacity Battery type: PzS Battery year of manufacture: 2018 Battery condition: 80 - 100% Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof protection, windshield, safety light, joystick.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 4,090 h, load capacity: 2,500 kg, lifting height: 6,040 mm, free lift: 1,910 mm, fuel type: electric, mast type: triplex, construction height: 2,725 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Elektro, Electric four-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Fpodpfx Aszt Dt Sedrsk Front tire size: Brand new Front tire condition: New Rear tire type: Superelastic Rear tire size: Brand new Rear tire condition: New Battery voltage: 80V Battery capacity: 620Ah Battery manufacturer: 86% remaining capacity Battery type: PzS Battery year of manufacture: 2019 Battery condition: 80 - 100% Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, safety light, joystick, rotating beacon, LED.

Condition: excellent (used), Year of construction: 2016, Type BAFAG ATU 25 Power 2 kW Material handling device, Labotek Power 1.1 kW Fpjdpfsuvg Dxjx Adrjk PRICE REDUCTION FROM 950 TO 850 EUR!!!

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 6,003 h, load capacity: 2,500 kg, lifting height: 3,170 mm, fuel type: electric, mast type: duplex, construction height: 2,275 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 3,120 kg, total length: 2,400 mm, drive type: Elektro, construction width: 1,220 mm, Electric 4-wheel forklift Load center: 500 Fpodsziralspfx Adrjk Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Technical condition: very good Front tire type: Superelastic Front tire size: 23x9-10 Rear tire type: Superelastic Rear tire size: 18x7-8 Battery voltage: 80V Battery Ah: 620Ah Battery manufacturer: GNB Battery type: PzS Battery year of manufacture: 2019 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, safety light, interior mirror, windshield wiper, single pedal, LED seat

Condition: used, mileage: 3,22,901 km, power: 130 kW (176.75 HP), first registration: 06/2011, fuel type: diesel, empty load weight: 5,300 kg, maximum load weight: 2,200 kg, overall weight: 7,500 kg, axle configuration: 4x4, fuel: diesel, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 6, total length: 6,200 mm, Year of construction: 2011, construction height: 3,110 mm, Equipment: all wheel drive, Engine runs only at idle, does not respond to throttle input. Fpsdpfx Adjndd I Dsrsk The vehicle is generally operational, but there are several aspects that should be addressed. The Unimog U4000 437/25 DoKa EURO-5 is a versatile used off-road truck with a flatbed configuration, suitable for a wide range of industrial applications. First registered in June 2011, the vehicle has a mileage of 322,901 km and is powered by a robust 4.2-litre diesel engine delivering 130 kW (177 hp). Its reliable all-wheel drive (4x4) capability makes it ideal for tough terrain. This used Unimog complies with Euro 5 emission standards and carries a green environmental badge, offering seating for up to six occupants. With compact dimensions (length 6,200 mm, width 2,550 mm, height 3,108 mm), it is fit for both on-road use and demanding off-road environments. The permitted gross vehicle weight of 7,500 kg allows for the transport of heavy loads. Sale to commercial customers only (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: used, mileage: 18,631 km, power: 110 kW (149.56 HP), first registration: 09/2011, fuel type: diesel, empty load weight: 8,600 kg, maximum load weight: 9,400 kg, overall weight: 18,000 kg, tire size: 295/60R22.5, axle configuration: 4x2, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro3, suspension: other, number of seats: 2, total length: 9,300 mm, Year of construction: 2011, operating hours: 18,631 h, construction height: 2,900 mm, Equipment: ABS, air conditioning, onboard computer, The Mercedes-Benz KAMAG WBH 25 Wiesel transfer vehicle is a specialized, used truck designed for handling semi-trailers. It has a fifth wheel coupling and Fodor Uzm Rjpfx Adrspk important features such as air conditioning and a Webasto heater. It was first registered on September 12, 2011. Equipped with an automatic transmission, it is powered by a 4,249 cc diesel engine with an output of 110 kW (150 hp). It meets the emission requirements of the Euro 3 standard and has a yellow environmental sticker. The yellow vehicle has an overall length of 9,300 mm, a width of 2,550 mm and a height of 2,900 mm, while it offers a permissible gross vehicle weight of 18,000 kg. Mileage: 166,139 km Operating hours: 18,631 hours Reverse gear not working! For sale only to businesses (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: used, mileage: 26,895 km, power: 110 kW (149.56 HP), first registration: 06/2012, fuel type: diesel, empty load weight: 8,600 kg, maximum load weight: 9,400 kg, overall weight: 18,000 kg, tire size: 295/60R22.5, axle configuration: 4x2, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro3, suspension: other, number of seats: 2, total length: 9,300 mm, Year of construction: 2012, operating hours: 26,895 h, construction height: 2,900 mm, Equipment: ABS, air conditioning, onboard computer, trailer coupling, The Mercedes-Benz KAMAG WBH 25 Wiesel transfer vehicle offers reliable performance with a diesel engine of 110 kW (150 hp) and a displacement of 4,249 cc. It is equipped with an automatic gearshift and has a mileage of 245,259 km. The Euro 3 emissions class ensures environmentally friendly use. The vehicle was built in 2012 and is finished in a metallic yellow color. The vehicle is ideal for commercial use, be it in agriculture or in the special logistics sector, thanks to its versatile loading capacities and robust design. It has a gross vehicle weight of 18,000 kg and is equipped with important features such as a rear view camera, air suspension on the rear axle and an emergency seat. It offers sufficient space with two doors and two seats. Fedoutpilepfx Adrepk Mileage: 245,259 km Operating hours: 26,895 hours Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.