Used Pendulum Impact for sale (1,511)

Condition: used, Year of construction: 2011, operating hours: 2,591 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,400 mm, total length: 1,250 mm, total height: 4,000 mm, volume flow: 10,000 m³/h, filter area: 100 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P10. The main areas of application for these systems are industrial plants/welding shops where point extraction is not feasible or where point extraction is insufficient to maintain air quality in the hall. Laterally mounted ducts with a pollutant collection point at a height of 3 m draw in contaminated air and direct it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses are supplied to clean the cartridge filters automatically at the required intervals. Upon impact, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Parameters: Capacity - 10,000 m3/h Motor power - 11 kW Filtration area - 100 m2 Bledpfx Aez N Am Usktep Fan in a sound-absorbing housing Year of manufacture - 2011 Number of operating hours - 2591 h Dimensions: Height - 4.00 m Base width - 1.20 m x 0.80 m Stock number: 1173

Condition: used, Year of construction: 1998, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 150 mm, cutting width (max.): 500 mm, saw blade diameter: 500 mm, saw blade bore: 30 mm, - Italian-made TECHNICAL SPECIFICATIONS: - motor power: 5.5 kW - maximum cutting height: 150 mm - maximum cutting width: 500 mm - blade speed: 2800 rpm - manual saw feed - two pawls - feeding table dimensions (L / W): 3000 x 540 mm - receiving table dimensions (L / W): 3000 x 540 mm - spindle diameter: 30 mm - extraction port diameter: 100 mm - machine dimensions (L / W / H): 630 x 160 x 190 cm - transport dimensions (L / W / H): 400 x 150 x 190 cm Bedeym Ak Repfx Aktelp - weight: approx. 350 kg

Condition: good (used), Year of construction: 2015, Used, in good condition Year of construction: August 2015 (installed end of 2016) Technical description Working width (with tool cutting circle 125 mm): 20 - 230 mm Working height (with mould cutting circle 125 mm): 8 - 120 mm Six standard feed pendulums from above Two driven rollers in the machine table 1st spindle First lower horizontal spindle Motor with brake 5.5 kW (7.5 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 125 - 145 mm Folding device, incl. folding cutter 2nd spindle First right vertical spindle 5.5 KW (7.5 HP) Individual motor with brake Diameter: 40 mm Speed: 6000 rpm Tool cutting circle 40 mm below table level: 100 - 200 mm Tool cutting circle 55 mm below table level: 100 - 180 mm Max. Tool diameter behind stop plane 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 3rd spindle First left vertical spindle Individual motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 40 mm below table level 100 - 200 mm Tool cutting circle 55 mm below table level 100 - 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 4th spindle First upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 5th spindle Second upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 6th spindle Second lower horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Maximum moulding depth 15 mm Axial adjustment movement 35 mm Spindles in general All moulder spindles dynamically balanced for high concentricity. Feed system Frequency-controlled feed 5 - 30 m/min. infinitely variable with brake 4 KW (5.5 HP) Machine stand, tables and stops Manual lubricant pump for table resin removal Machine operation Memory function For memorising the setting values of profiles. Spindle axes with electronic double displays. Function: - Saves the setting values of the finished profile under a profile number at the touch of a button - When the profile number is selected again, the electronic double displays show the setting values - The displays are synchronised by manually adjusting the spindle - 99 memory locations Blsdpfequ Sc Hsx Aktep Electric height adjustment of the feed Centralised position of lubrication points at the front of the machine

Year of construction: 1991, condition: ready for operation (used), functionality: unexamined, machine/vehicle number: 511 138K, Engine included. Price upon request. Bodpfxszc Hp Ao Aktjlp

Condition: good (used), Year of construction: 2006, Ref. -No.: 10651 Manufacturer: CHIRON Type: Mill 2000 Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840 D - Safety Integrated Storage location: Halberstadt Country of origin: Germany Machine-No.: 498-XX X-Travel: 2000 mm Y-Travel: 500 mm Z-Travel: 640 mm Total Power Requirement: 29 kW Weight Of The Machine Ca.: 9,6 t Further information: 3-axis machining center equipped with a Siemens CNC control system and a 40-position tool magazine. The machine allows pendulum operation on two separate machining areas. Tool Interface: SK40 Blodpfx Aj Ahkyaektsp Working Area: X-axis: 2,000 mm (can be divided into 2 × 850 mm) Y-axis: 500 mm Z-axis: 640 mm Equipment: Screw chip conveyor with discharge to the left side Stand-alone Knoll coolant system for tool coolant supply and machine sump flushing The machine can be inspected under power.

Condition: used, mileage: 3,23,000 km, power: 129 kW (175.39 HP), first registration: 07/2015, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 7,110 mm, total width: 2,600 mm, total height: 3,340 mm, loading space length: 5,200 mm, loading space width: 2,470 mm, loading space height: 2,450 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, tail-lift, Fuso 7C18 DUONIC freezer truck with Carrier Supra 750 refrigeration unit, Lamberet box body, and LBW. ?! Engine has been completely overhauled in our master workshop, 0 km !! * !! New clutch !! * EURO 6 emission standard * Cruise control * Leaf suspension * Automatic transmission * ABS * ASR / switchable * Airbag * Air conditioning * Central locking * Double bench seat for passenger (3-seater) * Electric windows * Fog lights * Headlight range adjustment * Rear view camera * Tire size: 205/75 R17.5 * 7,490 kg GVWR * Unladen weight: 5,200 kg * Payload: 2,300 kg! LAMBERET freezer box body: * Year of manufacture 2015 * Internal dimensions: 5,200 x 2,490 x 2,450 mm (L x W x H) * 12 pallet spaces * Pallet width * Soft wall, 3-part, longitudinally movable Bods Ahqfwjpfx Aktelp * Cold curtain * Portal doors at the rear * Side door on the right * Aluminum impact strips on the right and left, bottom * Lashing rails, 2 rows on the right and left * Floor: Aluminum tread plate Dhollandia DLHM 10 tail lift, vertical Carrier Supra 750 refrigeration unit: * Year of manufacture 2015 * Diesel / Electric (380 V) * Remote control in the cab * Temperature recorder - German vehicle - 1st hand! - TÜV / MOT inspection on request and for an additional charge: new! Errors and prior sale excepted!

Condition: excellent (used), Year of construction: 2005, operating hours: 7,480 h, functionality: fully functional, overall weight: 33,500 kg, fuel type: diesel, Terex Pegson Trakpactor 428 on tracks 2005 year 7480 genuine working hours on John Deere CAT C9 33500 kg Inlet[mm]:up to 1067x711 mm Max size of inlet materiał: 400 mm CSS[mm]: 0-20 to 0-100 mm Capacity[t/h]: from 100 to 200 Feed hopper 3,68 m3 Fitted with overband magnet Side conveyor can be bought. Wear plates 90% Blodpfjyazl Hex Aktsp blow bars martensitic-ceramic Machine in great working condition, can go straigt to work

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: CUM300/S-DSF, Netzsch condux grinding mill completely in original condition. Are herbs ground with it. motor: Siemens 22kw 40.5A 2945 RPM Bledpfx Akoudygbetsp Mill: used at most 2 years in operation incl. grinding plate incl. grinding rotor incl. pipework intake and fall air Lock: Coperion 150mm lock. hosokawa mill

Condition: new, color: other, Field of application: Mining We produce, mobile, primary, primary - secondary or tertiary, impact - crushers. On a trailer, with a hopper, belts, grizzly or wooble feeder, to separate clay and earth from the rock. It can also be a combination of crushers + screen, sieve, with two, three or four deck_ DRY PROCEDURE or WET PROCEDURE. The final products are tampons: 0-30 mm, 0-60 mm or 0-100 mm or asphalt-construction fractions; 0/4, 4/8, 8/11, 11/16, 8, / 16, 16/22, 16/32 mm. The plant is used for work in soft and medium hard rock. Technology has advanced, today they can crush impact crushers even in difficult working conditions. On a tertiary impact crusher in difficult working conditions, the impact hammers can be pre-shredded up to 40,000 m3 of gravel or eruptive stone. Bledpfx Asx D Dcboktjp The power supply of the plant is via a cable, from a transformer station or via a generator. The size of the plant will depend on the project inquiry . ----- ----- ----- Mining crushing plants are offered, on a trailer; jaw crushers, cone crushers, vertical crushers, all types of separations, DRY PROCEDURE and WET PROCEDURE, with washing. ----- ----- ----- The warranty on the plants is 2 years. We provide service, all spare parts. ----- We offer all technical support on the issue of how correct and economically justified work out some quarry !! Many years of professional experience in surface exploitation in quarries, open pit, of mineral resources.

Year of construction: 2000, condition: ready for operation (used), A Stromab pendulum saw with swiveling saw unit and roller conveyors is available. Motor power: 7.5kW, saw blade diameter: 600mm, saw blade bore: 20mm, max. cutting height: 210mm, max. cutting length: 460mm, extraction port diameter: 150mm, roller conveyor length left/right: 2500mm/2500mm, roller conveyor width: 500mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Bedpfx Akjyb Sclstjlp

Condition: good (used), functionality: fully functional, OM - Impact crusher plant on steel structure Inlet: approx. 1,000 x 565 mm, electric motor 110 kW SCHENCK vibrating feeder Discharge box and discharge chute Bledsxcmizepfx Aktop

Condition: used,

Year of construction: 2011, operating hours: 3,800 h, condition: ready for operation (used), functionality: fully functional, McCloskey I54 impact crusher on tracks 2011 year 3800 genuine working hours on CAT C13 engine' 2900 crusher hours(new controller) Engine CAT C13 - 536 HP 53000 kg Inlet[mm]:up to 1200x1350 mm Max size of inlet materiał:800 mm CSS[mm]: 0-20 to 0-150 mm Capacity[t/h]: from 150 to 300 Feed hopper 6,8 m3 Fitted with overband magnet Fitted with prescreener Fitted with side conveyor 3-generator 31,5 kVA 400 V Blodpfxox Npv Hs Aktep Wear plates 90% Blow bars 90% Machine in great working condition, can go straigt to work

Condition: new, Year of construction: 2025, IMPACT 4in1 from stock Europe the IMPACT FL 1500 is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A weldong machine with extra functions as cleaning and cutting from 1,5 Kw together cust atlast 25 till 30.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting and cleaning steel and other materials. when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price the 3 kw have 2 wire feeders sothat welder can shift quickly. Bjdeu Nf Nzopfx Aktjlp 1,5 and 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: like new (used), Year of construction: 2008, Manufacturer: Hazemag Bljdpeggfmhofx Aktop Type: AP-PH 1415E Mach. No.: AD 26953 Year of Manufacture: 2008 Motor: Scania Rotor Size: 1.400 x 1.500 mm Included: – Conveyors – Overband Separator (Wagner 452-95/120-450) – Dumpbunker – Feeders (Jöst FUF 1300/ – 200 x 4100 – Jöst FUF 1200/1277 – 200 x 2500) – Pre-screen (Jöst SUG 1400 x 2000) – Hydraulic opening system.

Condition: excellent (used), Offered for sale is a used Ratzinger impact mill D800. 75 kW motor – NEW! Completely overhauled. Wear parts replaced. Steel construction included. Bjdpfx Asw H Savektslp

Condition: new, functionality: fully functional, power: 160 kW (217.54 HP), fuel type: electric, color: other, overall weight: 12,400 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE DMK series are secondary impact crushers that leading to the crush of medium and high hardness materials, which are used after jaw crushers or primer impact crushers. DMK crushers are also designed to reduce wear costs while increasing capacity and cubic production. It reduces medium and high hardness materials such as limestone, dolomite, granite and basalt into the desired size of asphalt and concrete aggregate. The ease of maintenance and adjustment is one of the major advantages of this type of crusher. Hydraulic body opening system, adjustment of crushing plates from the outside, easy pallet and lining replacement ensure that these types of crushers can be used easily on site conditions. GENERAL SPECIFICATIONS AND FUTURES: -High capacity -High reduction ratio -Wear surfaces are protected by solid filler electrode welding -Hammers and crushing plates are manufactured from high manganese steel casting -Inner surfaces of the crusher is coated with wear resistant lining plates -Easy maintenance thanks to hydraulic adjustment system TECHNICAL SPECIFICATIONS • Model: FABO DMK-01 • Type: Secondary Impact Crusher • Capacity: 130-200 tph • Size: 1120 x 1000 mm • Max Feeding: 450mm • Motor: Heavy duty GAMAK, 160 kW Bearings: Heavy duty SKF-FAG • Speed: 750 rpm Bjdpfezibf Rex Aktelp • Weight: 12400 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, power: 300 kW (407.89 HP), fuel type: hybrid, color: orange, emission class: euro5, Type of fuel: Hybrid (electric and petrol) Field of application: Mining Empty weight: 54.000 kg Dimensions (LxBxH): 1620 x 325 x 370 cm Make of engine: Perkins Emission class: EEV Productivity: 350 tph = Additional options and accessories = - Central lubrication - Particulate filter = Remarks = Capacity 200 - 350 t/h Opening Size 1,200 x 900 mm Bljdpfx Akszvf Rqstjp Rotor Size 1100x1300mm Weight 54,000 kg Transport (mm) 16,200 x 3,250 x 3,700 Operation (mm) 16,400 x 6,350 x 4,150

Condition: reconditioned (used), functionality: fully functional, fuel type: electric, Year of construction: 2005, Ratzinger RC 12 Impact Crusher, Bohringer RC12 + B1000 L15000 Conveyor Crusher completely overhauled Crusher mounted on a hydraulic chassis, very easy to transport. Crusher sandblasted and painted BRAND NEW conveyor L15000 Rotor diameter [mm]: 1100 Inlet [mm]: 1220x900 Maximum material inlet [mm]: 600 Crusher electric motor: 132 kW Side conveyor electric motor: 5.5 kW Main conveyor electric motor: 4.5 kW Blodpfx Aey Uh Swoktsp Vibrator electric motor: 7.5 kW Conveyor belt electric motor: L15000: 7.5 kW Gap adjustment [mm]: 0-20 to 0-100 - hydraulic adjustment Capacity [t/h]: 100 to 250 depending on the material and the fraction obtained Crusher equipped with a side conveyor with pre-screening Crusher weight: 31,000 kg Conveyor weight: 1500 kg The crusher is 100% operational and ready for operation. Crusher liners are 90% operational. The crusher has been completely overhauled, with new bearings and a new electrical system. Blow bars rotated

Condition: good (used), functionality: fully functional, Opening: 620 x 350 mm Rotor-diameter x -width: 1.060 x 610 mm feed size hardrock -180 mm feed size limestone -300 mm, Blodjlgzrhopfx Aktjp complete with E-drive, conveyor and steel-construction

Year of construction: 2005, condition: good (used), functionality: fully functional, crusher HARTL PC204N opening: 1.260 x 1.060 mm rotor-diameter: 1.300 mm new blow bars feed hopper approx. 7 cbm vibrating chute Blodpfjnxi Dnsx Aktjp active 2-deck pre-screen side- and main-discharge conveyor overband magnet separator CAT diesel engine C10 (291 kW) weight: approx. 50 t.

Condition: used, functionality: fully functional, fuel type: electric, Infeed: approx. 1,000 x 700 mm Rotor diameter x width: 600 x 1,000 mm Electric drive: 37 kW Bedpfx Akjzr D H Notjlp Semi-mobile steel frame with infeed and outfeed hoppers.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: Demo-Impact-300, Impact tester with motoric hammer lifting and protection housing - ready equipet for testing according CHARPY ISO148 (EN10045) - Demo-Machine (as new) Bodpsptcwofx Aktslp - potential energy: 300 Joule - alternate models: 150 / 300 / 450 / 600 / 750 J. - warrenty period 24 month - see also the photos of optinonal items

Condition: new, Year of construction: 2026, functionality: fully functional, CONSTMACH primary impact crushers are among the most preferred solutions among rock crushing machines, offering high efficiency and superior crushing performance. They deliver excellent results in crushing soft and medium-hard rocks, limestone, marble, and similar materials. These crushers enable a high percentage of cubic product to be obtained thanks to their powerful rotor structure and optimized impact plates. This feature ensures that the final product is superior in terms of both quality and granulometric homogeneity. Bsdpfoxpkgwex Aktslp Thanks to the hydraulic adjustment mechanism, adjustments can be made quickly and safely. In addition, there is minimal time loss during maintenance. The durable body structure, manganese-lined inner surfaces that provide protection against wear, and wide feed opening guarantee long-lasting use and high performance. With all these features, primary impact crushers increase production capacity by reducing the need for secondary crushing in plants and lower operating costs. Primary Impact Crusher Technical Specifications MODEL: CPI – 1412 Rotor Diameter: 1,400 x 1,250 mm Maximum Feed Size: 900 x 900 mm Production Capacity: 200 – 250 t/h Motor Power: 250 kW Weight: 23,000 kg MODEL: CPI – 1415 Rotor Diameter: 1,400 x 1,540 mm Maximum Feed Size: 1,000 x 1,000 mm Production Capacity: 350 – 400 t/h Motor Power: 315 kW Weight: 28,000 kg MODEL: CPI – 1620 Rotor Diameter: 1,600 x 2,000 mm Maximum Feed Size: 1,300 x 1,300 mm Production Capacity: 400 – 600 t/h Motor Power: 2 x 250 kW Weight: 52,000 kg Why Choose CONSTMACH Primary Impact Crushers? CONSTMACH has proven its reliability with crushing and screening equipment manufactured to high engineering standards. Our Primary Impact Crusher models are designed for different capacity and application needs. Each one undergoes tested quality control processes and offers long-lasting use. In addition, thanks to our after-sales technical support, spare parts supply, and fast service advantages, you will get a return on your investment for many years to come. If you are looking for high performance, durability, and low maintenance costs, the CONSTMACH rock crushing machine series is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: ready for operation (used), * Brand: O&K Germany * Type: P 100/125 impact crusher * Opening : 1350 x 900 mm * Incl.: 132 kW E-motor Blsdpfxe Ahq Imj Aktsp