Used Pendulum for sale (648)

Condition: not inspected (used), Year of construction: 2009, operating hours: 6,000 h, functionality: unexamined, feed rate X-axis: 80 m/min, travel distance X-axis: 3,550 mm, travel distance Y-axis: 1,680 mm, travel distance Z-axis: 275 mm, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel range X axis: 3,550 mm Travel range Y axis: 1,680 mm Travel range Z axis: 275 mm Main spindle max. speed: 24,000 rpm Working area X axis: 3,060 mm Working area Y axis: 1,210 mm Working area Z axis: 100 mm Speed X: 80 m/min Speed Y: 80 m/min Speed Z: 25 m/min MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): 5,900 x 4,020 x 2,340 mm Weight: approx. 3,350 kg Extraction port diameter: 200 mm Operating hours: approx. 6,000 h EQUIPMENT Linear tool changer with 8 positions, traveling Side pick-up station for 2 tools Traveling pick-up station for aggregate/tool HSK F63 14 vertical drilling spindles (9 in X and 5 in Y direction) 6 horizontal drilling spindles (4 in X and 2 in Y direction) 1 grooving saw (4-10 mm), arranged on X-axis 1 main spindle HSK F-63, 9 kW Dusdpfjyc Smgex Afpon Preparation for 0-360° C-axis 6 consoles for holding vacuum clamps Traveling laser for vacuum suction cup positioning 2 working areas for pendulum operation Handheld terminal Automatic central lubrication Note: Container loading and seaworthy packaging by the seller is not possible.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, controller model: Siemens 840D solution line, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 630 mm Travel Z-axis: 550 mm Rapid traverse speed: 60 m/min Spindle speed: 12,000 rpm Clamping area: 3,600 x 710 mm T-slots: 5 Number of axes: 3 Tool magazine: 40 positions Traverse path in pendulum mode per work area: 1,250 mm MACHINE DETAILS Control: Siemens 840D solution line Machine weight: 9,600 kg EQUIPMENT 24-position tool magazine Coolant system 900 l High-pressure system 30 bar Dodeyfgf Nepfx Afpsun Internal coolant supply tools Chip conveyor Hydraulic unit 200 bar 6 hydraulic connections for 200 bar 2 connector couplings A+B (3 per table side) Variable Chiron clamping logic Prosin Plus tool breakage monitoring for diameters > 3 mm Automatically opening and closing loading door Machine preparation for 1 x NC axis

Condition: new, Saw unit swivels 46 ° on both sides. Programmable, electric saw blade adjustment Control unit with electronic display for saw blade tilt and lift Torsional rigidity and vibration-free working Easier plate feeding due to large trimming frame with roller Telescopic ruler with 2 professional folding stops Excellent cutting precision scoring unit equipped with its own motor - easily adjustable from the outside saw blade diameter of 400 mm scoring saw blade with a diameter of 160 mm 2-position saw blade pendulum protection manell adjustable 3-axis controlled Motorized rip fence with electronic positioning includes: Position display via an encoder Adjustment via ball screw Stepless adjustment via switch or automatic positioning system Cutting width 1270 mm Programmed movement of motorized adjustment and tilting for saw unit UP version with swivelling control panel for maximum flexibility X version with Compex miter fence for quick and accurate execution of miter cuts with automatic compensation of the stop position. (Length compensation) incl. options: Duedpfsd Akygox Afpen - cutting lenght 3200 mm - on / off buttons for main motor and scoring unit integrated in saw carriage - CompeX frame - Version "READY 3 UP" - 2 saw speeds (3500/5000 U/min) Max. cutting width with rip fence 1270 mm Format cuts 3200 mm main motor 7,0 kW, 400 V, 50 Hz Saw blade angle -46 - 46 ° Max. cutting height 90° 136 mm Max. cutting height 45° 97 mm Max. cutting height -45° 60 mm saw blade diameter 400 mm Diameter scoring saw blade 160 mm (Main) saw blade speed 4000 min¯¹ Dust extraction ports 120 & 80 mm

Condition: ready for operation (used), Year of construction: 2010, x-travel 10000 mm y-travel 1500 mm z-travel 1000 mm passage 1300 mm passage width 1500 mm control Siemens Sinumerik 840 D turning speeds 2 Stufen: 6000 U/min Number of working hours 54821 h tool taper SK 50 Boring power 120 mm thread capacity M 55 toolpiece magazine: chain magazine 30 Stück rapid traverse X-axis 36000 m/min rapid motion Y-axis 30000 m/min rapid traverse Z-axis 30000 m/min total power requirement 36 kW dimensions of the machine ca. 12 x 11 m Gantry-style milling machine with movable portal bridge and stationary clamping table. Features: • Clamping table designed with transverse clamping beams spaced 750 mm ndard panel panels are not included. Panel panels must be purchased separately if required. • Hydraulic clamping device with clamping bridges for axis machining, includinghydraulic system • Angle drilling and milling head, n = 4000 rpm SK50 • High accuracy and stability thanks to Hirth gearing • Automatic tool change in the angle head • RWP20.50-M touch probe • Pendulum operation • Safety fence with light curtains, Sick brand • Clamping table with 750 mm transverse clamping beams • 30-position tool chain magazine on the gantry frame • Machine cooling system • Integrated water-to-air heat exchanger in the control cabinet • Unisign remote diagnostics for Siemens Sinumerik 840 D • Makrolon curtains on both sides of the gantry bridge motorized height adjustment • Partition wall with viewing window • Chip conveyor with hinged belt design • Mounting and alignment elements Dsdjx S Rx Iopfx Afpjun • Documentation Accessories: 1 spare SK50 angle drill and milling head 1 spare Hexagon RWP 20.50-M touch probe 1 2500 x 1200 mm T-slot clamping frame, which can be installed on the machineinstead of the hydraulic device. Various spare parts

Condition: used, maximum load weight: 30,350 kg, overall weight: 45,000 kg, axle configuration: 2 axles, first registration: 06/2024, next inspection (TÜV): 06/2026, loading space length: 12,500 mm, loading space width: 2,550 mm, loading space height: 300 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2024, Equipment: ABS, DOLL tera 2-axle low-bed semi-trailer removable gooseneck and additional drive-over rear bogie First registration 06/2024 Mileage only 33,398 km Unladen weight: 14,650 kg Gross vehicle weight: 45,000 kg Gooseneck length: 3,070 mm Fifth wheel height: 1,200 to 1,280 mm Turning radius: 2,350 mm Low bed length: 6,800 mm Extension length: 5,700 mm Rear axle assembly length: 2,700 mm Bucket recess width: 700 mm Duodpjx E Ixlofx Afpjn Bucket recess depth: 550 mm Loading height low-bed: 300 mm Loading height above the running gear: 955 mm Trailer width: 2,550 mm Hydraulic suspension -70 / +530 mm Technical fifth wheel load: 21,000 kg Axle load: 24,000 kg Removable gooseneck with external main frame Trailer paintwork: 3-coat system incl. spray galvanization DOLL Tronic CAN-Bus system Low-bed floor: 45 mm spruce planks between flatbed frames 24-volt electric hydraulics Trailer functions controlled via DOLL keypads on the gooseneck ADDITIONAL STEERING with RADIO CONTROL EEG electronic straight tracking assistance Rear: aluminum folding ramps with lifting device, length 2,100 mm, width 600 mm, mechanical width adjustment, load capacity 20,000 kg Load securing in the low-bed: 7 pairs of swiveling lashing rings with 13,400 daN lashing force 5 pairs of stakes pockets in the outer frame 3 pairs of M36 threads on the outside for screwing in lashing brackets Chassis: DOLL tera pendulum axles with hydraulically suspended BPW axles All axles hydraulically forced-steered, with up to 60° steering angle at the rearmost axle All grease points connected to centralized lubrication system (ZSA) WABCO Trailer EBS with ABS and RSS Air tanks: aluminum BEKA-MAX central lubrication system front and rear bogie Oversize load package with folding deck wideners (2x 225 mm), extendable warning sign package up to 3,200 mm width Tyres: 8 x 245/70 R 17.5 RENTING is the new BUYING, available immediately from us with full-service rental-----

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Features and technical data: - Working area X: 3,740 mm - Working area Y: 1,570 mm - Working area Z: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional C-axis locking - Tool changer positions: 24 with rotary magazine; 10 in the left side of the machine stand - Vertical drilling spindles: 12 - Machine table: console table - Table positioning automation: available - 6 workpiece supports, type e-motion - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for pendulum operation - with automatic central lubrication - with mobile control panel with PC monitor - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with hand-held control device - Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: short-term Dusdpjx Hllxofx Afpen Location: Röllbach

Condition: used, mileage: 77,382 km, power: 346 kW (470.43 HP), first registration: 12/2022, fuel type: diesel, overall weight: 37,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 12/2026, color: black, gearing type: automatic, total width: 2,550 mm, total height: 3,273 mm, loading space length: 6,200 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, MAN TGS 41.470 BB CH with MEILLER Three-way Tipper Bordmatic First registration 12/2022, one owner Dsdpfxox Rtare Afpeun Mileage 77,328 km Engine D2676 LFAI, torque 2,400 Nm, complies with Euro 6 e standard, Wheelbase 2,980 mm Diesel tank 400 liters Multiple-stage high-performance engine brake EVBec Disc brakes on front axles, drum brakes on rear axles, STEERED BRAKE Paver brake function Automated 12-speed transmission MAN TipMatic 12.28 OD with Idle Speed Driving, Rocking Free, and Performance modes, reinforced driveshaft Tyres: Front axles: 385/65 R 22.5 Rear axles: 315/80 R 22.5 Suspension type: Parabolic leaf spring, 3-leaf front axles, 5-leaf rear axles, towing coupling mounted on rear cross member Front axle load per axle: 8,000 kg Rear axle load per axle: 13,000 kg 2-line trailer brake connection 15-pin trailer socket ABS trailer socket Day cab NN, comfort cab suspension, driver comfort package, construction site package +, trailer package, heated comfort driver's seat + air-suspended comfort passenger seat, MAN sound system, MAN Truck navigation Europe, EasyControl panel in driver’s door, STABO CB radio, CLIMATRONIC air conditioning, rain sensor, window in cab rear wall, daytime running lights, fog lamps, cornering light, 2x roof beacons, entry lighting Active safety package with: EBS, ABS Offroad with additional off-road logic, ESP, ASR, emergency braking assistant EBA, lane departure warning LDW, full braking assistant, emergency braking signal, automatic hazard warning activation, attention assist MEILLER three-way tipper, reinforced design Internal dimensions (LxWxH): 6,200 x 2,420 (pallet width) x 1,000 mm, front wall 1,200 mm Floor: Hardox steel HB450, 6 mm Side walls: Hardox steel HB450, 4 mm Left side wall BORDMATIC, hydraulically operated, opens 180° Right side wall pendulum-mounted with central locking Rear wall Hardox steel HB450, 4 mm, pendulum-mounted, opens automatically during tipping Dosing unit using plug-in bolt at the discharge chute Folding lashing rings 2,000 kg and plug-in lashing rings 8,000 kg at the tipper body corners MEILLER roll tarp, can be operated from below with crank RENTING is the new BUYING, also available from us as a full-service rental -----

Condition: used, Roller conveyor: 250+360 cm Cutting width: max. approx. 600 mm Cutting height: max. approx. 120 mm Feed: Pneumatic Pfeiffer Piccolo pendulum saw with stable roller conveyor for cutting boards and beams. The machine is equipped with a pneumatic saw feed and secure two-hand operation. Djdpsxrtzpefx Afpoun Video available upon request.

Condition: like new (used), Year of construction: 2023, SCM Accord 40 fx CNC machining center with the following equipment: Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable Z clearance height = 350 mm with H50 suction cups OF0165 Axis travel speed of Accord 40 fx Version PRO-SPEED OF0168 Pendulum (dual-zone) operation Duodpfx Ajyfgzdefpsn OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via Internet 450328 eye-M PRO control console with integrated PC 450291 Additional fixed control panel 870068 TECPAD – remote control of machine functions 560058 No. 10 carrier rails MATIC – L1825 230429 MAXI working unit – Prisma KT 1 870046 Prepared for angle gearbox "Prisma KT-KS" 470014 Air nozzle for tool 870119 Device for tool length measurement 870120 Device for panel thickness measurement 870009 Drilling unit F16 OF0176 Front stop row H50 for worktable with 10 carrier rails 510205 Preparation for clamps for worktable with 10 carrier rails 480178 Front stop row H110 for worktable with 10 carrier rails 480105 Rear stop row H110 for worktable with 10 carrier rails 480137 First lateral stop row H110 for worktable with 10 carrier rails 480005 Suction cups H110, 145x145 mm, 36 pcs 480006 Suction cups H110, 145x55 mm, rotatable, 10 pcs 480007 Suction cups H110, 180x65 mm, rotatable, 10 pcs 480018 Suction cups H110, 145x30 mm, rotatable, 5 pcs 480410 Lifting devices H110, 8 pcs 350016 Vacuum pump 250 (300) m³/h 560538 Additional automatically adjustable base for MATIC 10 carrier rail 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy saving system 210837 TR12 – lateral tool magazine 210056 Rapid 24 – rear tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit OF0422 Machine operating interface software Maestro cnc OF0435 Hardware dongle for Maestro cnc 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German SPECIAL FEATURES INCLUDED IN MACHINE CONFIGURATION: - Extension of maximum panel width to 2,120 mm for full processing; traverse length remains unchanged at 1900 mm. - 10 support suction cups for remnants MACHINE ALREADY DISMANTLED AND STORED. LIST PRICE 2023 EUR 399,890.--

Condition: new, empty load weight: 2,950 kg, maximum load weight: 10,050 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,080 mm, loading space width: 2,420 mm, suspension: steel, tire size: 2, color: other, gearing type: other, front tire size: 2, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, central locking for side and rear drop sides, automatic rear panel opening when tipping backwards, side panels are pendulum-mounted and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grained steel, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the side, gearbox support winch with load and fast mode, at the front, contour marking according to ECE R 048 regulation. -- Subject to errors, changes and misprints, sample images -- For more data see: !, More details: ! Duedpfx Ajyg Dpzofpsn

Condition: used, Year of construction: 2004, operating hours: 77,374 h, machine/vehicle number: IntNr231477, Vertical CNC Machining Center CHIRON MILL 6000 high speed with NC swivel head Year of manufacture: 2004 – major overhaul by manufacturer CHIRON in 2013 The machine underwent a complete factory overhaul by CHIRON in 2013. Operating hours: approx. 80,374 h Spindle replacement: March 2021 – spindle hours: approx. 8,000 h Maintenance performed: January 2024 Technical Specifications: Control: Siemens 840D (PCU50, NCU572.4) NC swivel head High-speed package: Motor spindle 12,000 rpm, 140 Nm Axis travels: X 6,000 mm / Y 630 mm / Z 550 mm Rapid traverse in X / Y / Z: 60 m/min Chip-to-chip time: 3.0 sec (3.3 sec DIN) vertical / 4.7 sec (5.0 sec DIN) horizontal Production package: - Scraper belt conveyor, discharge height 1,050 mm - Preparation for internal coolant supply (IKZ) - Vacuum rotary filter KNOLL VRF250 (suitable for steel, cast iron, aluminum, plastic, brass) - High pressure 70 bar with HP pump and variable valve - Automatic loading doors Djdpfx Afsyg Nqwspsun - Central partition for pendulum machining - 92 tool positions HSK-A63 (rear magazine) - 5-axis milling package - Air blast - Tool life monitoring - Additional V24 RS232 interface in electrical cabinet - BDE/MDE interface (states: machine on, machine running, piece counter) - Marposs (Brankamp) collision monitoring CMS100 - 3D machine model for kinematic simulation in CAM programming system - Hydraulic unit 210 bar, 2 clamping circuits, separate system clamping pressure per pendulum field, clamping pressure monitoring Linear clamping system KOHN 8 hydraulic clamping vises KOHN Multi 2000 MFS 125/680 HD Two-part operator platform (tread grid) across the full 6,000 mm operating width Dimensions and Weight: Machine height: approx. 3,000 mm Total weight: approx. 20,000 kg The machine can be inspected under power by appointment. Technical data and details are subject to change or error, subject to prior sale.

Condition: used, Year of construction: 1977, Technical details: honing diameter: 125 mm stroke: 500 mm throat: - mm grinding spindle speed: 26-1200 (12Steps) U/min honing diameter: 30 (min.) mm honing diameter: 165 (max.) mm table adjustment:: 800/150 (max.) mm table surface area: 500 x 1000 cm total power requirement: 4,22 kW Weight approx.: 0,15 t dimension machine xH: 1,30 x 1,20 x 2,70 m There is a movable table that moves lengthwise and crosswise. ·There is a movable table that travels in both longitudinal and transverse directions. ·Manual lubrication with cooling. ·The machine is capable of honing. ·Pendulum movement in rapid traverse between two adjustable end positions is possible. Duodpfx Afew Rv Tajpjn *

Condition: used, Year of construction: 2013, machine/vehicle number: 5279, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 22 rpm, Year of construction 2013 Control system: SIEMENS Sinumerik 840D pl HSK 100-A tool holder TRAVEL horizontal-longitudinal X = 8,000 mm Vertical headstock slide Y = 1,600 mm Headstock horizontal-transverse Z = 1,300 mm FUNCTIONAL PROBE: m&h HSK 100 SIEMENS B-MPI HAND-HELD CONTROL UNIT Dusdpeu Sppwsfx Afpjn TRAVELING WORK PLATFORM 3-SIDED SPRAY AND CHIP PROTECTION WALL CHIP CONVEYOR SPRAYING PLATE Sizes: Length: 10,000 mm Width: 2,500 mm WASHING GUN IN THE WORKROOM REINFORCED COOLANT SYSTEM Pump capacity: 32 l/min at max. 20 bar Coolant tank: 2000 l COLLISION MONITORING SYSTEM 2 CHANNEL pcs. 2 monitoring channels: - 1st collision monitoring orthogonal milling head (channel 1) - 2nd collision monitoring fork head (channel 2) PENDULUM MACHINING 3 WORK AREAS MILLING SURFACE INTERPOLATION (TRAORI, 3D tool radius compensation, spline interpolation) ROTATED AXIS COORDINATE SYSTEM 2 PICK-UP STATION For fork head, arranged on clamping plate Storage positions 10 Maximum tool weight kg 12.5 Maximum tool length mm 200 Maximum tool diameter mm 63 Maximum tool diameter when free mm 250 Neighboring position Tool holder HSK 6 AUTOMATIC TOOL CHANGER Number of tools in chain magazine 48 Maximum tool diameter with magazine filled to mm 125 Maximum tool diameter with mm 250 free adjacent positions Maximum tool length mm 500 - Maximum tool weight kg 25 Maximum tool load torque Nm 40 Tool holder HSK 100-A HEAD CHANGE MAGAZINE 1 pc.FORK HEAD WITH HIGH FREQUENCY SPINDLE AUTOMATIC FORK HEAD WITH INTEGRATED HIGH-FREQUENCY SPINDLE - High-frequency milling spindle: - Integrated high-frequency spindle - Tool holder HSK - A 63 DIN 69893 - Main drive power 20 kW at 100 % ED or 25 kW at 40 % ED - Speed range up to 20,000 1/min - Motor spindle bearing with permanent grease lubrication - Sealing air seal - Torque: 40 Nm at 100% ED, 50 Nm at 40% ED - Automatic tool clamping - Power transmission according to speed-performance diagram GMN HCS 170 - Technical data according to data sheet E 745.1467.00 UNIVERSAL MILLING HEAD IN ORTHOGONAL DESIGN - Liquid-cooled milling head - Cast construction made of GGG 60 - Milling head, automatically swivels 180 x 1 degree - The resulting positions can therefore not only be approached via the CNC control, but also programmed and processed - Repeat accuracy at the spindle nose ±0.002 mm, part accuracy thus ±3 sec - HSK 100-A tool holder - The milling spindle is equipped with a hydromechanical quick tool clamping system - Tool pull-in force: 45 kN - Internal coolant supply form A-D - External coolant supply via shower ring - Speed range 22- 4,000 1/min MAIN DRIVE by a frequency-controlled liquid-cooled AC motor with - 32 kW drive power at 100% duty cycle, 46 kW at 40% duty cycle. Direct power transmission WITHOUT gearbox, therefore no heating or wear of a gearbox. - 637 Nm torque at 100% ED, 875 Nm at 40% ED

Year of construction: 2017, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH AUTOMATIC A/B-AXIS HEAD LONGITUDINAL TRAVEL: 3000 mm TRANSVERSAL TRAVEL: 1100 mm VERTICAL TRAVEL: 1500 mm RAPID FEEDS L-T-V: 35 m/min TABLE SIZE: 3100 x 1000 mm HEAD: CONTINUOUS ; ISO 50 ; 8000 rpm; 25/33 kW; 480/640 Nm TOOL MAGAZINE: CHAIN-TYPE ; 24 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 15 Bar WEIGHT: 30500 Kg Djdpeumpd Asfx Afpsun OVERALL DIMENSIONS: 8000 x 5320 x 4265 mm ACCESSORIES: SWARF CONVEYOR ; ETHERNET PORT ; LINEAR SCALES ; PORTABLE HANDWHEEL ; THROUGH-SPINDLE AIR BLAST NOTE: LASER TOOL SETTER BLUM; TOUCH PROBE RENISHAW RMP-60; EXTERNAL SPINDLE SPRAY MIST LUBRIFICATION; GUARD FOR PENDULUM MACHINING

Condition: excellent (used), Year of construction: 1997, Rover 20 machining center Working area 2,893 x 950 mm, milling spindle with ISO30 tool holder 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills as well as grooving saw, 6-fold tool changer. The NC410 control had a floppy disk drive and a colour screen as well as the simplest, graphically supported programming options. Furthermore, the Rover 20 already enabled pendulum machining. Dimensions: approx. 3800 x 2000, height 1600 Dedpfjlc Dwnsx Afpsun Control cabinet: 950 x 700 x 1300 From location

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening during reverse tipping, side walls pendulum-mounted and foldable, side drop sides with spring relief, platform floor made of 4 mm fine-grained steel, 8 heavy-duty recessed lashing rings in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the side, stepless height-adjustable drawbar, removable stakes at the rear, gear support winch with load and quick mode in front, integrated storage compartment for two aluminum loading ramps in the chassis, lockable ramp compartment (privacy cover), contour marking according to ECE R 048 regulation, vehicle with day registration, rental price from €550. Typing errors, mistakes and changes reserved, sample images. More data at: !, More details: ! Duodpfxoyfnldo Afpon

Year of construction: 2018, condition: ready for operation (used), Suitable for grinding calcined coke, feed material diameter: 0-20mm, moisture feed material: under 0.1%, measurement: NEA Malvern analysis, with pendulum mill, automatic filling station, BigBag unloading station, dust filter, pipe chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel construction, documentation and additional elements, the system is still in its original packaging and has been stored for two years. Dujdpfx Aenxk Ixsfpsn

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Duedpjxy Tmnsfx Afpen

Condition: ready for operation (used), Year of construction: 2006, operating hours: 7,647 h, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 18,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,500 W, tool weight: 10,000 g, number of axes: 5, This 5-axis HEDELIUS T8 - 2300 was manufactured in 2006, featuring a robust vertical machining center design. It boasts a large travel range of 2300/800/850 mm and a high spindle speed up to 12,000 rpm. The machine includes a B-axis NC swivel head, a 40-position tool magazine, and supports a maximum workpiece weight of 2500 kg. Consider the opportunity to buy this HEDELIUS T8 - 2300 vertical machining center. Contact us for more information. • NC swivel head B-axis: +92° / -92° • Max pendulum operation: 2 × 850 mm • Rapid traverse: 60 m/min • Feed force: X/Y 5000 N, Z 9000 N • Spindle: • Max torque: 158 Nm • Front spindle bearing diameter: 70 mm • Tool clamping (pull-in force): 12 kN • Tool magazine/changing: • Tool positions (standard): 40 • Tool positions (Magnum): 80 • Max tool diameter: 125 mm (180 mm with adjacent positions empty) Duedpoyfiapjfx Afpjn • Max tool length: 330 mm • Tool change time (approx.): 3.5 s • Chip-to-chip time: vertical 6.0 s / horizontal 6.5 s • Table/capacity: • Fixed table (L×W): 2000 × 920 mm • T-slots: 6 × 18 H12 • Rotary table: 1 × 18 H8 • Max. workpiece weight: 2500 kg • Machining capacities: • Drilling in St 52 with carbide: 40 mm • Tapping: M24 • Milling in St 52: 500 cm³/min • Distances (reference): • Z travel vertical (L2): 850 mm • Spindle nose to swivel axis (L3): 300 mm • Spindle nose to table surface (L4): 40 mm • Z travel horizontal (L5): 1000 mm • Spindle axis to table surface (L6): 210 mm • Y travel (L7): 800 mm • Table center to travel start/end (L8/L9): 400 / 400 mm • Power/weights: • Total connected load: 25 kVA • Machine weight (standard): approx. 17,000–17,500 kg • Hours: • Operating hours: 21,100 h • Spindle hours: 7,647 h Additional equipment • Chip conveyor • Internal coolant through spindle, 40 bar • Paper belt filter • Oil and emulsion mist separator • Rotating viewing windows (2) • Cleaning guns (2) • Renishaw touch probe Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2007, Used Mazak Machining Center X-axis travel: 1,740 mm Y-axis travel: 760 mm Z-axis travel: 660 mm Rapid traverse X-axis: 36 m/min Rapid traverse Y-axis: 36 m/min Rapid traverse Z-axis: 36 m/min Table size: 2,000 x 760 mm Table load capacity: 1,400 kg Distance from table surface to spindle nose: 160 mm - 840 mm Including magnetic table Spindle speed: 12,000 rpm Main drive power (5 min rating): 18.5 kW Main drive power (30 min rating): 11 kW Dodpfeyfmz Dsx Afpsun Tool changer: Number of stations: 30 Spindle taper: SK 40 Max. tool diameter: 80 mm Max. tool diameter with adjacent stations empty: 110 mm Max. tool length: 350 mm Max. tool weight: 8 kg Control: Mazatrol 640M Interfaces: RS232, LAN, floppy disk drive Dimensions & Weight: Dimensions (L x W x H): 4,435 x 3,300 x 3,442 mm Machine weight: 12,000 kg Included: Various tools + Renishaw probe Documentation/manual Chip conveyor Partition for pendulum machining Electronic handwheel EIA / ISO programming Synchronous tapping Through-spindle coolant 5 bar A complete, very good machine, immediately available!

Condition: ready for operation (used), Year of construction: 2004, A machining center Chiron, which was completely overhauled in 2013, is available. Travel path X/Y: 6000mm/630mm, rapid traverse: 60m/min, tool positions: 92, tool holder: HSK-A63, speed: 12000rpm, torque: 140Nm, milling axes: 5, weight: approx. 20000kg, control: Siemens S840D, operating hours: 77344h. Includes scraper belt conveyor, OKZ preparation, Knoll VRF 250 vacuum rotary filter, high-pressure pump (70bar), emulsion mist extraction (2x800m³/h), central partition for pendulum machining, hydraulic unit (210bar), and Kohn linear clamping system with 8x hydraulic vices Multi 2000MFS 125/680 HD. Documentation available. An on-site inspection is possible. Dusdpfx Ajw Nyi Nefpen

Year of construction: 2016, condition: ready for operation (used), A Wiese pendulum bucket elevator in Z-shape for gentle vertical and horizontal conveying of sensitive, light bulk materials (potato chips) is available. Particle size range: 50mm-60mm, max. conveying material temperature: 30°C, moisture: dry, bulk density: 0.07t/m³, conveying capacity: approx. 14.3m³/h, belt speed: 0.22m/s, max. bucket filling: 60%, belt material: EPDM, bucket width: 476mm, support roller diameter: 95mm. Lower edge discharge: 4960mm, feed vertical shaft center: 3490mm, vertical shaft center last discharge: 1675mm. Documentation available. An on-site inspection is possible. Dedpfx Afjx H S N Djpeun

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Dusdpfoycpx Hex Afpon Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, WEINIG Powermat 700 Planing and Moulding Machine Year of manufacture: 2020 Tool configuration: 018 (b-r-l-t-t-b) 1st bottom spindle: 7.5 kW, 6,000 rpm 2nd right spindle: 15 kW, 8,000 rpm 3rd left spindle: driven together with right spindle, 8,000 rpm 4th top spindle: 11 kW, 8,000 rpm 5th top spindle: 7.5 kW, 8,000 rpm 6th bottom spindle: 7.5 kW, 8,000 rpm Feed motor: 5 kW Infinitely variable feed speed: 5 - 40 m/min Total connected load: 56.5 kW Equipment: - Comfort Set Djdpfxjyh Rhwj Afpoun - Electronic digital readouts - Rebating unit - MarathonCoating table insert in front of first spindle - Quick-adjustable fence lip after right spindle - Pressure roller above, opposite right spindle, swing-away and spring-loaded - Reduced roller spacing opposite right spindle - Extension of pendulum axis opposite left spindle up to 150 mm - CNC control for dimension adjustment (thickness and width) - Split pressure shoes before 1st and 2nd top spindles - Frequency inverter for smoother motor start-up and stop - Pneumatically controlled feed roller before 1st bottom tool (raise/lower) - Climate control unit for control cabinet - Short infeed table, 1.20 m long, with 2 driven rollers above table and 1 driven roller in the table - MemoryPlus with 10.1-inch display

Condition: excellent (used), Year of construction: 2004, Working travels 2000 x 550 x 560 mm Dusdpforrf Svox Afpen Spindle taper BT40 Spindle speeds -12'000 rpm Tool changer 32 Pos. FANUC 18i control Tool breakage control device Tool length measuring device Partition for pendulum operation Chip conveyor Misc.accessories MARCELS MASCHINEN CH