Used Pendulum for sale (651)

Condition: new, maximum load weight: 96,590 kg, overall weight: 1,26,000 kg, axle configuration: > 3 axles, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. Excerpt from the equipment specification. Full specification available upon request. Gooseneck: * Gooseneck hydraulically liftable/lowerable as well as detachable. Length approx. 3,650 mm * 2 pairs of folding lashing rings to the outside (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the middle section of the gooseneck (LC 10,600 daN) Kjdpfxoxn E Iyj Aanonf * For tractor unit: 6x4 or 8x4 2-axle front bogie: * Pin-eye coupling front and rear. Length: approx. 2,970 mm * Chassis width: approx. 2,750 mm * 1 pair of lashing rings (LC 10,000 daN) in the outer frame * 2 pairs of lashing rings (LC 10,000 daN) on the central beam Loading platform: * 6-axle double telescopic loading platform with pin-eye coupling at the front and chamfering approx. 500 mm x 8° at the rear, length approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * 7 pairs of lashing rings along the central beam (LC 10,000 daN) Pendulum axle 2-axle front bogie: * PENDULUM AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on the axle compensation cylinder with automatic reset function * Hydraulic cylinder with shut-off valves and safety pins for securing in the raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Pendulum axle 6-axle loading platform: * PENDULUM AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on the axle compensation cylinder with automatic reset function * Hydraulic cylinder with shut-off valves and safety pins for securing in the raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Tyres: * 24x brand of our choice (M+S) 245/70 R17.5 load index 143/141L (146/146F) Paintwork: * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure maximum corrosion protection * Final paintwork with 2 coats of 2K topcoat, single colour in RAL 3002 Carmine Red * Rear section metallised and painted RAL 9010 (Pure White) Options included: * Truck hydraulic connection with flow controller (20 l/min), including support arm for supply lines, tractor unit tank must be at least 80 L * with MAX Trailer coupling pieces, otherwise coupling pieces to be supplied free ex works by the customer * 3.5 inch king pin * Steel front wall, approx. 400 mm high * Removable ALU side boards and rear wall on the gooseneck, approx. 400 mm high, anodised finish * Socket for remote steering operation on the gooseneck with cable remote control and push buttons including single-wheel tracking alignment (without installation in the tractor unit) * Control lever on the gooseneck protected by a foldable cover * Illuminated gooseneck control area with on/off switch * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2 * Hydraulic connections from gooseneck to lowbed with screw couplings * BEKA-MAX central lubrication system for a 2-axle bogie with standard grease NLGI-2 * Stake pocket strips mounted transversely in the load floor for plug-in stakes approx. 100 x 50 mm * Chassis surface finished with sand coating for anti-slip protection * Hydraulic coupling pin * BEKA-MAX central lubrication system for the loading platform with standard grease NLGI-2 * Surface of the loading platform finished with

Year of construction: 2017, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH AUTOMATIC A/B-AXIS HEAD LONGITUDINAL TRAVEL: 3000 mm TRANSVERSAL TRAVEL: 1100 mm VERTICAL TRAVEL: 1500 mm RAPID FEEDS L-T-V: 35 m/min TABLE SIZE: 3100 x 1000 mm HEAD: CONTINUOUS ; ISO 50 ; 8000 rpm; 25/33 kW; 480/640 Nm TOOL MAGAZINE: CHAIN-TYPE ; 24 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 15 Bar WEIGHT: 30500 Kg OVERALL DIMENSIONS: 8000 x 5320 x 4265 mm ACCESSORIES: SWARF CONVEYOR ; ETHERNET PORT ; LINEAR SCALES ; PORTABLE HANDWHEEL ; THROUGH-SPINDLE AIR BLAST NOTE: LASER TOOL SETTER BLUM; TOUCH PROBE RENISHAW RMP-60; EXTERNAL SPINDLE SPRAY MIST LUBRIFICATION; GUARD FOR PENDULUM MACHINING Knjdpfx Ajumpd Ajanef

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening during reverse tipping, side walls pendulum-mounted and foldable, side drop sides with spring relief, platform floor made of 4 mm fine-grained steel, 8 heavy-duty recessed lashing rings in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the side, stepless height-adjustable drawbar, removable stakes at the rear, gear support winch with load and quick mode in front, integrated storage compartment for two aluminum loading ramps in the chassis, lockable ramp compartment (privacy cover), contour marking according to ECE R 048 regulation, vehicle with day registration, rental price from €550. Typing errors, mistakes and changes reserved, sample images. More data at: !, More details: ! Knedjxzlk Iopfx Aanjf

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH secondary impact crushers set the standard in rock crushing machine technology with their high efficiency and superior crushing performance. These crushers are specifically designed to meet high-capacity production needs. Thanks to their robust body structure and optimized rotor design, they deliver a perfect cubic-shaped final product even with hard and abrasive materials. The three-stage pendulum system allows primary, secondary, and tertiary crushing operations to be performed on a single machine. This minimizes time loss in the production process while maximizing efficiency. High chrome or manganese alloy cutting bars offer long life and low maintenance costs. The hydraulic opening system maximizes operating time by facilitating maintenance and part replacement. CONSTMACH secondary impact crushers offer a reliable solution for any rock crushing plant thanks to their high reduction ratio and wide discharge opening. Secondary Impact Crusher Technical Specifications CSI-1210 Rotor Diameter: 1,100 x 1,100 mm Maximum Feed Size: 200 mm Production Capacity: 60 - 100 t/h Motor Power: 160 kW Knsdpfjxpuxwox Aanef Weight: 17,500 kg CSI-1212 Rotor Diameter: 1,100 x 1,250 mm Maximum Feed Size: 250 mm Production Capacity: 120 - 150 t/h Motor Power: 200 kW Weight: 21,500 kg CSI-1215 Rotor Diameter: 1,100 x 1,500 mm Maximum Feed Size: 350 mm Production Capacity: 200 - 250 t/h Motor Power: 250 kW Weight: 26,000 kg Why Choose CONSTMACH Secondary Impact Crushers? CONSTMACH prioritizes quality and durability in the production of stone crushing machines. Our secondary impact crusher models reduce operating costs with their long-lasting components, low maintenance requirements, and high performance. They offer guaranteed uninterrupted operation with an extensive service network and easy access to spare parts. Each model is designed to suit different production capacities, providing the most suitable solution for your facility. With reliable engineering, high production standards, and a customer-focused service approach, CONSTMACH is always one step ahead in the stone crushing industry. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, mileage: 6,64,130 km, power: 310 kW (421.48 HP), first registration: 04/2014, fuel type: diesel, empty load weight: 13,458 kg, maximum load weight: 12,542 kg, overall weight: 26,000 kg, tire size: 315/80 22,5, tire condition: 40 %, axle configuration: 6x6, wheelbase: 3,600 mm, next inspection (TÜV): 03/2026, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2014, operating hours: 6,64,130 h, front tire size: 315/80 22,5, rear tire size: 315/80 22,5, Equipment: ABS, air conditioning, all wheel drive, cabin, cruise control, differential lock, electronic stability program (ESP), fog lights, hydraulics, onboard computer, soot filter, trailer coupling, truck registration, Reference number for inquiries: 400011 Mercedes-Benz, Arocs 3345 BB * Year of manufacture: 2014 * ABS (Anti-lock Braking System) * Trailer coupling * EBS (Electronic Braking System) * ESP (Electronic Stability Program) * Power windows * Cab * Air conditioning * Particulate filter * Cruise control * Tipping hydraulics * On-board computer * Differential lock * Local transport > 7.5 t * Steel tipper body * Pendulum tailgate * Digital tachograph * USB interface * OBU prep (on-board unit) * Electric windows and mirrors * AdBlue tank * Fog lights * Comfort suspension seat * Multifunction steering wheel * Inspections: TÜV / Emissions 03.2026 * Transmission type: Automatic * Suspension: Leaf / leaf springs * Gross vehicle weight: 26,000 kg * Curb weight: 13,458 kg * Payload: 12,542 kg * Permitted total weight: 26,000 kg * Tire condition 1st axle: 30% – 30% – Tire size: 315/80 R22.5 * Tire condition 2nd axle: 40%|40% – 40%|40% – Tire size: 315/80 R22.5 * Tire condition 3rd axle: 40%|40% – 40%|40% – Tire size: 315/80 R22.5 * Wheelbase: 3,600 mm * Tire sizes: 315/80 R22.5 * Body: Meiller 3-way tipper Knedpfxjxf Tg Sj Aansf * Left-side Bordmatic * Hydraulic system for trailer Disclaimer: Subject to change, prior sale and errors excepted. Further pictures and videos are available on our website. Our comprehensive service includes: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Processing of all (export) documents * Ordering of export / customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV approvals, registration service * Transport of commercial vehicles Please contact our trained staff, we will be happy to assist you.

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Kjdpfxexy Tmnj Aanonf

Condition: new, maximum load weight: 98,290 kg, overall weight: 1,26,000 kg, axle configuration: > 3 axles, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment features. Full equipment details available upon request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm * 2 pairs of lashing rings, foldable to the outside (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the center section of the gooseneck (LC 10,600 daN) * For tractor units: 6x4 or 8x4 2-axle front undercarriage: * Bolt-eye coupling front and rear. Length approx. 2,970 mm * Undercarriage width: approx. 2,750 mm * 1 pair of lashing rings (LC 10,000 daN) in the outer frame * 2 pairs of lashing rings (LC 10,000 daN) on the central beam Loading platform: * 6-axle extendable loading platform with bolt-eye coupling at the front and rear bevel approx. 500 mm x 8°, length approx. 11,000 mm * Technically extendable by approx. 7,700 mm * Axle spacing: approx. 1,500 mm * 7 pairs of lashing rings along the center beam (LC 10,000 daN) Pendulum axle 2-axle front undercarriage: * Pendulum axle, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle equalization cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and pre-insertion pin for securing in the raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Pendulum axle 6-axle loading platform: * Pendulum axle, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle equalization cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and pre-insertion pin for securing in the raised position * Technical axle load: 13,740 kg each (30 km/h) Knedpfxoxn E I Ho Aansf * Hydraulic axle compensation Tyres: * 24 x brand at our discretion (M+S) 245/70 R17.5 load index 143/141L (146/146F) Painting: * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Options included: * Truck hydraulic connection with volume regulator (20 l/min), incl. support gantry for supply lines, tractor unit tank must have a minimum capacity of 80 L * with MAX Trailer couplings, alternatively couplings to be provided ex works by the customer * 3.5 inch king pin * Steel front wall, approx. 400 mm high * Plug-in ALU side walls and rear wall on the gooseneck, approx. 400 mm high, anodized finish * Socket for steering operation at the gooseneck via cable remote control with pushbuttons including single-track control of the axles (without installation in the tractor unit) * Control lever on the gooseneck protected by a foldable cover * Control lighting at the gooseneck with on/off switch * BEKA-MAX central lubrication system for one gooseneck with standard grease NLGI-2 * Hydraulic connections from gooseneck to lowbed trailer with screw couplings * BEKA-MAX central lubrication for the 2-axle undercarriage with standard grease NLGI-2 * Stake pocket rails mounted crosswise in the loading platform floor for plug-in stakes approx. 100 x 50 mm * Surface of undercarriage coated with integrated sand coating for anti-slip protection * Hydraulic coupling pin * BEKA-MAX central lubrication system for the loading platform with standard grease NLGI-2 * Loading platform surfa

Condition: new, 0 ja Working width 3000 (3500) mm 0 ja Ruchser RU-BM-3000 (option: 3500) Wing assembly table ----- Herstellerbeschreibung: Item 1.0 Article 0610000 RU-BM-3000 Sash assembly table, for sashes up to max. 2500 mm height with RU-SH, special screwdriver length 3000 mm, width 1400 mm, inclination of working platform manually adjustable. Usable width 2500 mm Holder for hardware shears or hardware punch. 10 swivel-mounted pendants for hanging the sashes, completely pneumatically foldable for unhindered movement of the sashes on the table surface. Device for scanning the sash fitting length for constant and variable/centered handle fit and any handle fit height for pre-drilled sashes, colour-coded dimension recognition for the fittings. Pendulum height can be set to 50 or 60 mm on one stop. RU-SH, special screwdriver with pneumatic depth cut-off mounted on carriage, safety control, pneumatic height adjustment, screw feeder with automatic switch-off of the filling container manual insertion for a second screw length on the special screwdriver, accessories. RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4 commuter rail manually adjustable in depth against left and right Kedpfjt Tq Aaex Aanjnf one 4-fold turret stop each. PSF - Pneumatic clamping device for sashes against the lateral stops. Working height adjustable from 900 - 1000 mm. Please specify whether felt, sliding or brush strips should be used as a support. Item 1.1 Article 6315 RU-BM-... adjusted to customer's fitting specification Item 1.2 Article 0500000 Holder adjusted to customer punching press/ shear For mounting a customer-supplied punching press or shear (other manufacturer) on the sash assembly table. Please specify make when ordering !!! ----- Price RU-BM-3000 in the above version ex works: on request! ----- Fitting bearing options for RU-BM-3000: ----- Version with fixed fitting bearing: Price EUR 4,409.00 Article 0630000 RU-BL-30/30 Fixed fitting storage unit Mounted above the leaf assembly table Length 3100 mm, depth 1250 mm, with 3 shelves with 10 compartments each, divided by partitions. Freestanding version: Price EUR 5,291.00 Item 0710000 RU-SBL3000/30 Freestanding storage unit, Length 3100 mm, depth 1250 mm, height 2050 mm, upright frame on the front without supports, 30 compartments, 10 in a row, each divided by partitions and a continuous shelf at the top, size of the compartments: width 280 mm, height 150 mm 4 pcs. Angle supports for corner deflections: Price 614.00 EUR Side length 120x120mm; inclination approx. 3° The front edge of the angles is bent up 5mm to prevent accidental unloading. 2 pieces on the left and 2 pieces on the right under the first shelf of the fitting. ----- Surcharge for RU-BM-3500 ----- Article 0610300 RU-BM-3500 Sash assembly table for sashes up to max. 3000 mm height with RU-SH, special screwdriver length 3500 mm, width 1400 mm, inclination of working platform manually ble width approx. 3000 mm Surcharge RU-BM 3500 to RU-BM 3000: EUR 2,831.00 Fitting bearing for RU-BM-3500 (only free-standing possible): Price EUR 6,714.00 Item 0710007 RU-SBL3800/36, free-standing fitting storage Length 3800 mm, depth 1280 mm, height 2060 mm...

Condition: good (used), Year of construction: 2012, EiMa ALPHA T CONTURA 5-Axis Universal Machining Center Year of manufacture: 10/2012 Control system: SIEMENS 840D sI 720 NCU Machine number: 11744 Travel axes: X – 5,029 mm / Y – 1,202 mm / Z – 772 mm B-axis travel: ±121° C-axis travel: ±211° Feed rates (X/Y/Z): 60/60/40 m/min New milling spindle installed on 19.05.2025 Kjdpfx Asx Hvzqjanenf Equipment: - 5-axis fork-type head - Milling spindle 15 kW / 12 Nm / 24,000 rpm - For milling, drilling, sawing - Disc-type tool changer, 12 tools, HSK-63 F - Pick-up station for saw blade - Spindle cooling unit - Fluidtech minimum quantity lubrication system - Partition wall for pendulum machining - Vacuum clamping plate by WITTE, 2,100 mm x 1,200 x 42 mm - Chip conveyor - Extraction unit by LOSMA NEWTON N6 Scope of delivery includes: approx. 35 tool holders / operating manual / documentation For equipment, technical data, and transport drawings – see PDF. Images, content, and specifications are provided without guarantee and are non-binding. All additional accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The delivery includes only those accessories expressly listed here, in the order confirmation, and on the invoice. FCA (Free Carrier, loaded truck) D-97944 Boxberg Packaging only Delivery: immediately Subject to prior sale / Payment due immediately upon conclusion of sale

Condition: new, Versatile tool carrier with many possibilities. The machine is hydraulically driven in combination with an 11 hp Honda engine. The machine can be equipped with a straight front brush, radial brush, weed brush, manure slide, feed slide, side brush, etc. The equipment is suspended pendulum, which ensures good ground adaptation on uneven terrain. The price is for the basic machine. Condition: New Knjdpfx Aajx I Iqmsnsf

Condition: used, maximum load weight: 1,75,620 kg, overall weight: 2,19,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Kjdpfexcdg Djx Aanonf BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: new, power: 390 kW (530.25 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x4, color: white, gearing type: automatic, emission class: euro6, suspension: steel, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, Permissible gross weight: 26,000 kg, fabric seats, interior color: anthracite, leaf spring suspension (front and rear), 1 x airbag, Intarder, tachograph, electronic braking system (EBS), electronic stability program (ESP), stationary air conditioning, air-suspended driver's seat, LED headlights, MP3 radio, leather steering wheel, power steering, electric windows, roof hatch, electrically adjustable exterior mirrors, immobilizer, central locking, refrigerator, Superstructure: KH tipper body Description: three-way tipper with Bordmatic (left), tipping trough with 11.5 cubic meters capacity. Tipper platform dimensions: L x W x H 4,800 x 2,550 x 1,000 mm. Wear-resistant Hardox steel floor 6 mm thick, side walls 4 mm thick, also of wear-resistant Hardox steel. Bordmatic left: hydraulically foldable HYDROBOARD, 2 cylinders under the tipper floor. Right side: pendulum type only, manually locked. Front wall: 4 mm, height 1,200 mm, with gravel deflector. Rear wall: 4 mm, with rear chute and dosing device (with locking pin), pendulum mounted, opens/closes. Electric tarpaulin: CRAMARO Galoppino, mounted on front wall, with radio remote control. HYVA hydraulic system, foldable side underrun protection made of aluminum, aluminum mudguards covering both rear axles, foldable underrun protection with spring relief, factory ready. Day cab, mechanical cab suspension. Passenger seat: “Cinema” version with fabric cover. Adaptive cruise control with FCW and AEBS-3, lane change warning system. Front: 8.00 t, parabolic, 167N Goodyear RR, N/A. Emissions class: Euro 6. Automated TraXon 12-speed gearbox, standard component layout. Fuel tank on the left. PACCAR Connect, Plus Driveline Warranty (3 years/200,000 km). Tipper V1, transmission PTO, PlugPlay, BB-CAN control, flexible cab step, pre-installed signal horns, two LED headlights for cab rear wall, beacons prepared for front cab, windshield with sun protection film, double-glazed rear window, no front mirror, DAF Corner View, central locking with two keys, two remote controls, leather steering wheel, door trim. Kedpfovr N Ngex Aanonf

Condition: new, working width: 6020 x 1000: ca. 140weight approx.: 2 tomessurements (LxWxH): ca. 7000 x 1700 x 1500: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 6020 - HIGH PROFITABILITY Ksdpfx Aaerzx Emjnenf - FULLY HYDRAULIC - HIGH QUALITY STEEL - EVEN CONTACT PRESSURE - HAND CUTTER - WITH PROFILING DEVICE - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm).

Condition: new, color: red, Super professional for large terrains and roads, infinitely adjustable brush and driving speed button, hydraulic drive, pendulum brush for uneven terrain, two hydro pumps. Knodpfex I Htgex Aansf Large tires for grip and ground clearance. 9 hp Honda engine, larger or diesel on request. Various options such as: collection box, manure blade, snow blade, side brush, riding seat, etc. Price is for the basic machine. Other prices and options on request. Condition: New

Condition: used, maximum load weight: 1,75,620 kg, overall weight: 2,19,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8 units of hydraulic BWP pendulum axle assemblies with remote control. Technically permissible gross weight 219,000 kg Technically permissible payload 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed heavy-duty trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator low-bed section up to 5 meters, featuring 4 wheel recesses, ABS, technically permissible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck type STH/ST Year of manufacture: 2002 Can be combined with heavy-duty module undercarriages, drivable loading platforms. Unladen weight approx. 5,900 kg Permissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" pin Removable aluminum side walls Fully hydraulically adjustable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty module First registration: 14.11.2001 As a single module, technically permissible total weight: 108,000 kg, technically permissible axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendulum axles, 24 wheels, tire size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into chassis: hydromechanical dual-circuit all-wheel forced steering with a maximum aggregate steering angle of 60°, integrated hydraulic oil tank Optimized bolt-lug coupling at front and rear for longitudinal combinations Single-tired pendulum axle assemblies with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles BPW axles with drum brake and ABS, technically permissible axle load of 34 t at 5 km/h 3rd module: Extendable low-bed heavy-duty module - Excavator bridge Year of manufacture: 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with drive-on module at the front Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in low-bed and 175.6 t in overall STHP8 (3+5) module possible. Unladen weight 11,900 kg Front and rear hydraulic bolt-lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty module First registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tired hydraulic pendulum axle assemblies with 4 wheels per axle line, 20 wheels (tire size 285/70 R 19.5) Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the configuration. For the special low-bed combination, a current manufacturer's certificate from Goldhofer is available. The low-bed trailer can be tested at our facility. Price NET excluding 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Kodpfx Aasxcdgqsnjnf

Condition: new, power: 5 kW (6.80 HP), Professional sweeper with hydraulic wheel and brush drive. Optimal working range due to the narrow width, maneuverability and weight distribution. Pendulum brush for uneven terrain. Suitable for medium-sized surfaces +/- 4000 m². Large tires for grip and ground clearance. 6.5 hp Honda engine, larger or diesel on request. Various options such as: collection box, manure blade, snow blade, side brush, speed control, riding seat, etc. Kodpfx Aaox I Hrpononf State: New

Condition: used, maximum load weight: 1,75,620 kg, overall weight: 2,19,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8 units of hydraulic BWP pendulum axle assemblies with remote control. Technically permissible gross weight 219,000 kg Technically permissible payload 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed heavy-duty trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator low-bed section up to 5 meters, featuring 4 wheel recesses, ABS, technically permissible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck type STH/ST Year of manufacture: 2002 Can be combined with heavy-duty module undercarriages, drivable loading platforms. Unladen weight approx. 5,900 kg Permissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" pin Removable aluminum side walls Fully hydraulically adjustable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty module First registration: 14.11.2001 As a single module, technically permissible total weight: 108,000 kg, technically permissible axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendulum axles, 24 wheels, tire size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into chassis: hydromechanical dual-circuit all-wheel forced steering with a maximum aggregate steering angle of 60°, integrated hydraulic oil tank Optimized bolt-lug coupling at front and rear for longitudinal combinations Single-tired pendulum axle assemblies with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles BPW axles with drum brake and ABS, technically permissible axle load of 34 t at 5 km/h 3rd module: Extendable low-bed heavy-duty module - Excavator bridge Year of manufacture: 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with drive-on module at the front Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in low-bed and 175.6 t in overall STHP8 (3+5) module possible. Unladen weight 11,900 kg Front and rear hydraulic bolt-lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty module First registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tired hydraulic pendulum axle assemblies with 4 wheels per axle line, 20 wheels (tire size 285/70 R 19.5) Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the configuration. For the special low-bed combination, a current manufacturer's certificate from Goldhofer is available. The low-bed trailer can be tested at our facility. Price NET excluding 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Knjdpfx Aajxcdf Hjnsf

Condition: new, power: 4 kW (5.44 HP), Professional sweeper with hydraulic wheel and brush drive. Optimal working range due to the narrow width, maneuverability and weight distribution. Pendulum brush for uneven terrain. Suitable for medium-sized surfaces +/- 3000 m². Large tires for grip and ground clearance. 5.5 hp Honda engine, larger engine and diesel on request. Various options such as: collection box, manure blade, snow blade, side brush, speed control, riding seat, etc. Condition: New Kjdpox I Hriefx Aanenf

Condition: used, maximum load weight: 1,75,620 kg, overall weight: 2,19,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Ksdpfexcdfaex Aanjnf Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: new, power: 4 kW (5.44 HP), Professional sweeper with hydraulic wheel and brush drive. Optimal working range due to the narrow width, maneuverability and weight distribution. Pendulum brush for uneven terrain. Suitable for medium-sized surfaces +/- 2500 m². Large tires for grip and ground clearance. 5.5 hp Honda engine. Knjdsx I Hrcjpfx Aansf Various options such as: collection box, manure blade, snow blade, side brush, speed control, riding seat, etc. Condition: New

Condition: used, maximum load weight: 1,75,620 kg, overall weight: 2,19,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module Ksdpfoxcdf Tox Aanonf First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: new, Fully galvanized, Very maneuverable by means of differential, Large tires with tractor profile, pendulum double slide, lots of pulling power. Kodpfx Ajx I Hq Soansnf Fully hydraulic or electric 24V. Various options possible such as: front brush, cubicle brush, collection box for brush, heavier manure slide, filled wide tires, etc. Condition: New

Condition: new, These machines can work behind the tractor and be moved sideways. They can mow grass, bushes, roadsides, embankments and ditches and be returned behind the tractor, where they can be used as a normal flail mower. Standard equipped with: Drive box mounted on the outside, so more free space for the PTO when mowing embankments Main drive by means of 4 V-belts Track roller 193 mm Ø with round ends This flail mower can pivot horizontally upwards by means of a so-called pendulum bracket Kedpfxjx I Hgts Aanonf Cutting height adjustable from 2 cm to 12 cm Freewheel present in drive box Condition: New

Condition: new, Year of construction: 2019, Bizon land leveler Working width: 3000 to 5000 mm Double-angled frame and pendulum axle Wide tyres: 500/50x17 Hydraulic doors Knjdpfx Aaox I Hfpenof Condition: New Year of manufacture: 2019

Condition: new, axle configuration: 2 axles, color: red, Year of construction: 2022, Beco Brevis 100 tipper • 10-ton tipper • Load capacity: 4.2 m³ water • Cargo box internal dimensions: 4100x2050x500 mm • Hydraulic tailgate or optional with doors • Air-braked tandem axle • Rear bumper • Pendulum tandem, track width 1650 mm Knodpfx Aaox I Dhzsnsf • Axle body: 90x90 mm • Tyres: 500/50 17, brand BKT • LED lighting • RDW certified • Various options available Condition: New Year of manufacture: 2022