Used Phrase Bench for sale (2,843)

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 700 mm turning speeds 115 - 1620 U/min centre height 125 mm spindle bore 27 mm tailstock quill taper MT 2 tailstock quill stroke 40 mm metric threading 0,2 - 3,5 mm thread - inch 8 - 56 inch. thread - module 0,2 - 12,5 mm swival range +/- Oberschlitten 45 ° connected load frequency 400 V total power requirement 0,75 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,41 x 0,61 x 0,41 m Equipped with - 27 mm spindle clearance Iiodpef Nb Hkjfx Aabeh - adjustable guideways - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Danger!! without digital display Scope of delivery: 3-jaw chuck 100 mm, change gear set, splash guard. On request also with 230 volt connection

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm throat 260 mm bore stroke 120 mm number of spindle speeds 80-1400 min-1 table surface area 410 x 390 mm total power requirement 0,8/1,5 kW weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m Iodeuhhzhjpfx Aaboih

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, For sale is a used, fully functional Dynapack DAQ54 chassis dynamometer with direct wheel hub connection. The system was purchased in March 2019 and has completed approximately 300 test cycles since – always carefully maintained and in excellent condition. The test bench comprises four mobile measurement units that are mounted directly to the vehicle's wheel hubs (after removing the wheels). Operation and data evaluation are handled via the included control unit with original software. Technical specifications: Max. measurable power: 3,000 hp / 2,200 kW (up to 1,500 hp / 1,100 kW per axle) Supports front-, rear-, and all-wheel drive Iedpfx Aaowuqwvjbsih Stationary or mobile operation (entire unit fits in a van) System advantages: - Precise power measurement via direct force transfer – no slippage, no friction losses - Maximum safety: No risk of tire blowouts or vehicle movement - Flexible deployment: Quick reconfiguration and compact design, also ideal for mobile use - Perfectly suited for tuning, development, and performance diagnostics Feel free to ask further questions. Inspection and testing are possible by arrangement.

Condition: used, Year of construction: 1984, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, table load: 5,000 kg, spindle diameter: 110 mm, total height: 3,800 mm, total length: 5,000 mm, total width: 3,000 mm, table length: 1,520 mm, table width: 1,225 mm, feed length X-axis: 1,800 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 2,000 mm, Tool holder SK50, Heidenhain control, machine is ready for collection and immediately operational. Isdpoxga Tnofx Aaboih

Condition: good (used), functionality: fully functional, throat depth: 180 mm, spindle speed (min.): 480 rpm, overall weight: 65 kg, Bench Drill Manufacturer: IXION Model: BT 13 Iiodpjw Ug Dqjfx Aabjh Technical Data: Manufacturer: IXION Model: BT 13 Year of manufacture: Spindle speeds: 480 – 850 – 1400 – 2300 – 4000 rpm Drilling capacity: max. 13 mm in steel Table size (base): 230 x 170 mm Swivel table: 230 x 170 mm Drilling depth: 70 mm Tool holder: B 16 or MK 2 Throat depth: 180 mm T-slots: 10 mm Power: 1.5 kW Weight: 65 kg Dimensions: L 0.4 x W 0.5 x H 0.855 m All information subject to change and without guarantee. A powered demonstration is possible at any time in our showroom.

Condition: new, Year of construction: 2025, CORMAK Z7016A Vario Bench Drill for Metal – Precision Pillar Drill with Stepless Speed Control The CORMAK Z7016A Vario bench drill is a compact and functional pillar drill for metal, designed for precision drilling operations in professional and workshop applications. Featuring stepless speed control, a robust construction, and versatile equipment, this model ensures maximum control over the drilling process and high work efficiency. Key Features Stepless speed regulation – speed range from 440 to 2600 RPM allows optimal adjustment to the material being processed. Durable cast iron construction – provides high rigidity and reduces vibrations during operation. Adjustable worktable – tiltable from -45° to +45° and height-adjustable via rack-and-pinion system. Laser guide and LED lighting – ensure maximum drilling precision and user comfort. Electronic speed display – enables full real-time control of parameters. 65 mm vice included – the machine is ready to work right out of the box. Construction and Technology The Z7016A Vario bench drill for metal is built on a solid 60 mm diameter column and a rigid 345 × 210 mm cast iron base. The machine’s body and worktable are made from precisely machined castings. The MT2 taper allows a wide range of tool fittings, while the 60 mm spindle travel enables deep hole drilling. With an overall height of just 870 mm, the unit is exceptionally ergonomic and portable. Precision and Performance Thanks to its 500 W (S1) / 650 W (S6) motor, the CORMAK Z7016A Vario pillar drill allows efficient drilling in metal up to 16 mm in diameter. No need for manual gear changes – stepless speed adjustment significantly shortens setup time. The ergonomic three-arm feed handle, depth gauge, and precise spindle guidance system ensure high repeatability and hole accuracy. Applications The Z7016A Vario is a metal bench drill recommended for: Locksmith and repair workshops Maintenance departments Technical schools Small production lines and prototyping facilities Standard Equipment 65 mm vice Laser drilling guide LED work area lighting Electronic speed display Three-arm feed handle Tilting table with rack-and-pinion height adjustment Technical Specifications Parameter Value Max drilling diameter 16 mm Spindle speed range 440 – 2600 RPM Power supply 230 V Spindle taper MT2 Max spindle travel 60 mm Spindle-to-column distance 125 mm Spindle-to-base distance 430 mm Isdsxbzuvspfx Aabsih Table height adjustment range 300 mm Column diameter 60 mm Table dimensions 200 × 200 mm Base dimensions 345 × 210 mm T-slot width 14 mm Motor power (S1 / S6) 500 W / 650 W Total height 870 mm Weight 31.5 kg

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 140 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 26 mm tailstock quill taper MT 2 MK tailstock quill stroke 65 mm connected load frequency 230 V total power requirement 1,1 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,3 x 0,6 x 0,65 m Benchtop lathe Ijdpfx Aajvn U Efsbjih 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. Base cabinet is optional!!

Condition: used, machine/vehicle number: 1231566, grinding wheel Ø: 300 mm Iodpfx Aajbuaa Ejbeih grinding wheel width: 40 mm electrical connection: 380 V, 1,5 kW space needed: 700 x 400 x 1150 mm

Condition: good (used), Stock No.: 3031 Manufacturer: Wörner Machine No.: 39135 Type / Model: B13 Drilling capacity: up to 10 mm Spindle mount: MK2 B16x2 Speed range: 560 to 7,000 rpm Stroke: 120 mm Throat: 250 mm Table size: 330 x 430 mm Head adjustment: 400 mm Machine footprint: 430 x 650 mm Distance table to spindle nose min./max.: 80 / 480 mm Total connected load: kW Ijdexfbaaspfx Aabeih Accessories/Equipment: drill chuck Condition: very good Weight: 165 kg Dimensions with table: 750 x 620 x 1,600 / 2,000 mm

Condition: used, Year of construction: 1998, bore capacity in steel (diameter) 25.0 / 30.0 mm throat 260 mm bore stroke 120 mm spindle taper 3 MK table: 390 x 420 mm T-slots 2x B 14.0 mm table height 900 mm turning speeds 80 - 1400 U/min column diameter 110 mm distance spindle /table 220 - 600 mm total power requirement 0.7 / 1.3 kW weight 275 kg range L-W-H 900 x 900 x 1600 mm Machine from a maintenance workshop TABLE DRILLING MACHINE / DRILLING HEAD HEIGHT ADJUSTABLE WITH CONSTANT TABLE HEIGHT Furnishing: - pole-changing motor Iiodpfx Aaoxab Sfjbeh - Continuous speed adjustment including analogue speed display - Spindle feed manually via cross handle - Drill head height adjustable, via hand crank - machined base plate with T-slots - adjustable drilling depth stop - Front main switch - Machine base including coolant system - Operation manual * Machine link: ?machineno=1008-9093640

Condition: ready for operation (used), functionality: fully functional, Work table 630 x 700 mm spindle sleeve 75 mm Tool holder SK40 Travel X-700 mm; Y-1,000 mm; Z-500 mm Iodpfeu Afqxex Aabsih Speed range 15 - 1,250 rpm

Condition: new, turning diameter over bed 290 mm turning diameter over slide rest 170 mm turning length 750 mm turning speeds 75 - 2000 U/min centre height 145 mm spindle bore 38 mm tailstock quill taper MT 3 MK tailstock quill stroke 80 mm connected load frequency 230 V total power requirement 1,5 kW weight of the machine ca. 0,34 t dimensions of the machine ca. 1,3 x 0,75 x 0,7 m Longitudinal and transverse feed. Iijdpfjvxw Htjx Aabjh 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools.

Condition: used, respectively Grinding wheel dimensions: 175 x 25 x 51 mm Grinding wheel speed: 2900 rpm Ijdpfxsdqgmwj Aabsih mounted on a common base

Condition: good (used), Stock number: 3030 Manufacturer: Wörner Machine number: 26207 Type / Model: B8 Iisdpfoxfa Upsx Aabjh Drilling capacity: up to 10 mm Spindle mounting: Drill chuck Speed range: 780 to 10,000 rpm Stroke: 70 mm Throat depth: mm Table clamping surface: 240 x 220 mm Head adjustment: Machine footprint: 320 x 430 mm mm Total connection: kW Accessories/Equipment: Drill chuck Condition: very good Weight: 120 kg Dimensions with table: 600 x 800 x 1,200 mm Table working area: 560 x 720 mm

Condition: new, bore capacity in steel (diameter) 32.0 mm threading max. M 24 throat 265 mm bore stroke 150 mm morse taper 3 MK turning speeds 320 - 1820 U/min table-size 332 x 332 mm T-slots 14.0 mm column diameter 100 mm 400 x 380 mm distance spindle/base plate max. 735 mm voltage 400 V Iedpfx Ajxabxrjaboih total power requirement 2.2 kW weight 246 kg range L-W-H 520 x 920 x 1380 mm Description: - robust table drilling machine with thread cutting device - very smooth running thanks to pulleys made of gray cast iron - drive: V-BELT - quality ball bearings ensure a high concentricity of the spindle - large drilling table with diagonally running T-slots - drilling table height adjustment via rack - thread cutting device - powerful and high-torque aluminum motor in accordance with IP 54 - standard with T-slots in the ground base plate - ergonomic handles for comfortable working - foldable drilling spindle guard - emergency stop button at the front - manual drilling depth adjustment - control cabinet - left with main switch

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 700 mm turning speeds 115 - 1620 U/min centre height 125 mm spindle bore 27 mm tailstock quill taper MT 2 tailstock quill stroke 40 mm metric threading 0,2 - 3,5 mm thread - inch 8 - 56 inch. thread - module 0,2 - 12,5 mm swival range +/- Oberschlitten 45 ° connected load frequency 400 V total power requirement 0,75 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways "by adjustable strips" - Strong engine with 0.75 kW Iedpfxof Nb Hgo Aabsih - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled.

Condition: ready for operation (used), Height-adjustable workbench with parallel vice, make "WERKSTOCK" with various exchangeable clamping jaws table rotatable, size: 650 x 650 mm Height adjustment: 750 - 1200 mm vice Iodpfx Ajdyp R Heabeih jaw width: 130 mm Clamping width: 150 mm

Condition: new, bore capacity in steel (diameter) 25,0 mm throat 180 mm bore stroke 80,0 mm morse taper 2 MK turning speeds 180 - 2270 U/min table-size 305 x 305 mm swivelling +/- 45 Grad T-slots 16,0 mm column diameter 72,0 mm voltage 400 V total power requirement 1,1 kW weight 57,0 kg range L-W-H 400 x 630 x 990 mm scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 - Digital quill stroke display - machine light - Right-left rotation - protective cover Isdpfjxaa Thjx Aabjih - Height-adjustable protective cover - T-nuts - operating tool

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 20 mm tailstock quill taper MT 2 tailstock quill stroke 60 mm metric threading 0,4 - 3,0 mm thread - inch 10 - 44 TPI thread - module 0,2 - 12,5 mm connected load frequency 230 V total power requirement 1,0 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 1,09 x 0,59 x 0,45 m Equipped with - 20 mm spindle passage Iiodsrfd Thjpfx Aabsh - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection

Condition: used, machine/vehicle number: 053051, grinding area: 200 x 25 mm electrical connection: 380 V, 0,5 kW space needed: 550 x 450 x 1100 mm Iedpfx Aobfp Ixjaboih weight: 95 kg

Condition: used, bore capacity in steel (diameter) 6.0 / 10.0 mm throat 200 mm bore stroke 60.0 mm spindle taper B 12 table: 280 x 260 mm turning speeds 430 - 9000 U/min column diameter 70.0 mm total power requirement 0.45 / 0.60 kW weight 95.0 kg range L-W-H 450 x 300 x 880 mm from a vocational training center (!!) Furnishing: - manual spindle feed - Analogue drilling depth display with mm scale - pole-changing motor - Work table with 2x T-slots height adjustable - machined base plate with 2x T-slots - Taper mandrel including keyless drill chuck - V-belt drive - ON/OFF switch, front - Connection cable + 16A plug - original instruction manual * Machine link: ?machineno=1008-9093645 Iedexaa Ryopfx Aabjih

Condition: good (used), machine/vehicle number: 12 230091, Grinding wheel dimensions: 300 x 40 x 76 mm grinding wheel speed: 1400 rpm grinding wheel drive: 380 V, 1,5 kW Isdpocwwm Tefx Aabjih Weight approx.: 85 kg Space requirement: 720 x 470 x 400 mm

Condition: new, bore capacity in steel (diameter) 25.0 mm throat 255 mm bore stroke 120 mm morse taper 3 MK turning speeds 105 - 2900 U/min table: 395 x 420 mm column diameter 100 mm threading max. M10 voltage 400 / 50 Hz V weight 140 kg Iodpfx Asxaa Dasabjih range L-W-H 500 x 570 x 1100 mm Furnishing : - Keyless chuck 1 - 16 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Digital drilling depth display - Automatic tool ejector - Right-left rotation device - Height-adjustable protective cover

Condition: new, bore capacity in steel (diameter) 18.0 mm throat 190 mm bore stroke 80 mm morse taper 2 Kurzspindel MK turning speeds 225 - 4.300 U/min voltage 400 / 50 Hz Volt table: 300 x 240 mm Ijdpfxoxaay Uo Aabeih column diameter 65 mm engine output 0.37 / 0.55 kW weight 110 kg Furnishing: - Large spindle speed range - stepless speed adjustment - machined base plate - Electrically secured spindle protection - Main switch lockable with motor protection switch - Reversing switch for clockwise and counterclockwise rotation - Operating instructions in German

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 25.0 / 30.0 mm throat 150 mm bore stroke 120 mm threading M18 / M22 spindle taper 3 MK table: 300 x 270 mm turning speeds 200 - 4.000 U/min column diameter 100 mm total power requirement 0.75 / 1.1 kW weight 170 kg range L-W-H 800 x 500 x 1400 mm Iiodpfx Aoxaamzsabeh from a training workshop (!!) New price approx. 4.700 euros Furnishing: - robust bench drill with V-belt drive - Clamp / relax using a quick release lever - stepless speed adjustment - digital speed display - EMERGENCY OFF push button at the front - stable feed handle - stable quill for tool mounting - Thread cutting device - Right / left running of the work spindle - Pole changing motor - manual spindle feed - Height-adjustable work table, using a hand crank - adjustable drilling depth stop