Used Phrase Bench for sale (2,770)

Condition: new, Universally applicable double grinding machine for professional users. The induction motor runs quietly and maintenance-free thanks to the quality ball bearings. The quality grinding wheels ensure optimal work results when sharpening and deburring tools. Technical data: Grinding wheel bore: 32 mm Grinding wheel grain: K 36 / K 80 Speed: 2850 rpm Motor output power S1 100%: 0.90 kW Motor input power S6 40%: 1.25 kW Voltage: 400 V Width: 510 mm Depth: 270 mm Height: 310 mm Weight approx.: 25 kg Features: - ON-OFF switch in accordance with IP54 with undervoltage release - Extended application area thanks to optionally available grinding attachment - Universally applicable for a wide range of materials (metal, plastic, wood, ...) - Very smooth running thanks to balanced rotor with quality ball bearings - Large protective glasses provide optimal protection against flying sparks - Stable and adjustable workpiece support made of cast iron - Powerful pulling power thanks to powerful Drive motor Scope of delivery: Djdpfx Aevnrm Hjddscr - Roughing disc K 36 - Finishing disc K 80 - Spark guard on both sides - Workpiece support Note: Illustrations may show special equipment and application examples. These are not included in the scope of delivery. (Belt grinding attachment and base frames available for an additional charge)

Condition: used, Double Bench Grinder GREIF Type D 17 Serial No. 05105 Grinding wheel diameter: 175 mm Grinding wheel width: 25 mm Motor power: 0.35 kW Grinding wheel speed: 2800 rpm Power supply: 380 Volt, 50 Hz - Grinding spindle newly fitted with bearings - Original pedestal Required space (L x W x H): 500 x 450 x 1120 mm Weight: approx. 100 kg Dsdpfx Ajxciu Tjddjcr Good condition

Condition: excellent (used), SCM T150 Spindle Moulder Dcjdsw Ral Hepfx Addor Spindle diameter: 35 mm Total spindle length: 180 mm Electric spindle lift Electric fence movement Electrically adjustable tilt angle -10/45° Variable spindle speed: 3000-4500-6000–7000-10000 rpm Motor power: 5.5 kW DTR technical documentation

Condition: new, -Sturdy steel and gray cast iron construction -Dynamically balanced milling unit anchored to the work table -Extremely robust construction -Smooth operation thanks to precision units and high dead weight -Comes with right-hand/left-hand rotation and electronic locking when changing direction as standard -Five speeds from 3000 - 10000 rpm -Speed changes are easily and conveniently performed from the machine side -Comes with an MK 4 interchangeable spindle system as standard -Large gray cast iron work table for lasting precision -Easy handling thanks to controls and a speed display on the front of the machine -Large milling stop with fine adjustment and aluminum stop jaws as standard -Stop adjustment via crank handle -Numerical display of the set spindle height, accurate to within a tenth -Powerful industrial motors Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Weight (net) approx.: 510 kg Extraction connection: - Number of extraction nozzles: 2 Dcjdpfx Adsu T Hhkjder - Extraction nozzle diameter: 80 mm - Number of extraction nozzle stops: 1 - Extraction nozzle stop diameter: 120 mm Work table: - Work table length: 2500 mm - Work table width: 810 mm - Table height: 923 mm Installation information: - Explanation of space requirements: The dimensions take into account the maximum travel distances or usable lengths. - Working area length: 3700 mm - Working area width/depth: 5000 mm - Explanation of working area: Please add the specified dimensions to the space required to determine the recommended free space for the machine. Features: - Router stop: Heavy-duty professional design with aluminum stop jaws and fine adjustment, adjustable from the front via a crank with a numeric digital display - Curved router guard - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Controls: manual height and tilt adjustment of the router unit - Position of control elements: on the machine body - Table design: table extension left and right and extendable workpiece support (total width 2500 mm) Electrical data: - Supply voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Router spindle: - Spindle tilt: -45 – +45 ° - Usable spindle length: 140 / 180 mm - Explanation of usable spindle length: for spindle diameter 30 – 35 / for spindle diameter 40 – 50 mm - Milling spindle stroke: 90 mm - Changeable spindle: MT 4 - Spindle speed(s): 3000/4500/6000/8000/10000 rpm Maximum milling tool diameter: - Maximum lowerable tool diameter: 320 x 60 mm - Maximum tool diameter for profile milling: 250 mm - Maximum tool diameter for tenon milling: 350 mm - Maximum tool diameter for form milling: 160 mm

Condition: used, Year of construction: 2014, throat 180 mm quill stroke 80 mm continious capacity 20 spindle taper MK 2 table-size 280 x 245 mm height of the machine ca. 1000 m column diameter 73 mm distance spindle /table max. 425 mm Dsdpfjxbtrgox Addscr dimensions ca. 615 x 330 x 1015 mm weight ca. 60 kg incl. vice HM Müller HT100P

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 9022, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,450 mm, travel distance Z-axis: 930 mm, spindle diameter: 100 mm, spindle speed (max.): 1,600 rpm, travel distance W-axis: 506 mm, swivel angle B-axis (max.): 360 °, TECHNICAL DETAILS x-axis travel: 1,500 mm y-axis travel: 1,450 mm z-axis: 930 mm w-axis: 506 mm B-axis (table): 360° Table size: 1,100 x 1,400 mm Dcodpfx Aew T Sqtsddor Table rotary: 360° Tool holder: SK 50 Spindle diameter: 100 mm Spindle speed: 5 - 1,600 rpm / stepless Feed rates (X/Y/W/Z-axis): 2 - 2,000 mm/min Rapid traverse X-axis (X/Y/W/Z-axis): 5,000 mm/min MACHINE DETAILS Table load capacity: 4.0 t Total power requirement: 40 kW Control cabinet dimensions: 2,000 x 600 x 2,000 mm Machine dimensions (LxWxH): 4.9 x 3.7 x 3.8 m Machine weight approx.: 14 t EQUIPMENT - Measuring probe - Electronic handwheel - Hydraulic weight compensation Y-axis - Universal milling head - CNC drilling and milling machine with hydraulic unit

Condition: new, Precise, smooth-rolling standard drill, high accuracy and quality. Drill table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Dodpfx Adsda Nqxedocr Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle in stock, available now

Condition: used, Double Bench Grinder STEPHAN-WERKE HAMELN Type SLD 121 Serial No. 1176445 Grinding wheel diameter: 175/145 mm Grinding wheel width: 20 mm Motor power: 0.37 kW Grinding wheel speed: 2800 rpm Mains connection: 380 Volt, 50 Hz - Original base - Side-mounted ball bearing slide with dovetail guide - Universal holder for the sliding carriage Space requirement (L x W x H): 470 x 430 x 1160 mm Weight: approx. 80 kg Dcedpfx Adjxciu Hedor In good condition

Condition: new, Year of construction: 2023, 14 mm Boring power 15 mm MK 2 bore depth 70 mm throat 180 mm bis 275 mm 529 mm table surface area 250x220 mm column diameter 65 mm Total height 890 mm total power requirement 0,6/1,0 kW 420-2100 U/min. weight of the machine ca. 63 kg Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Machine with CE mark! new machin Domestic equipments: - Stepless speed control - Table adjustment via rack - Digital speed display Dcsdpfew U Egwox Addor - Full motor protection - drill protection

Condition: new, Motor ----- 900W Voltage ----- 400V - 3 Phase Dodoga Tw Aspfx Addjcr Speed ----- 2950 rpm Grinding stone dimensions ----- 250 x 32 x 32 mm Coarse stone ----- Grain 36 Fine stone ----- Grain 80 Safety class ----- IP40 Weight ----- 32 kg OPTION * Support box Price: € 99,00 ex vat

Condition: used, Year of construction: 2001, drilling diameter 18 min drilling capacity diameter max. 15 mm bore depth 90 mm throat 215 mm spindle bis 360 mm spindle 560 mm table plate 350 x 290 mm column diameter 75 mm Total height max. 1050 mm weight ca. 100 kg spindle turning speed - stepless 100 - 1800 U/min Dcodpfsxbtraox Addor motor speeds: 700 / 1400 U/min Pole-changing motor

Condition: good (used), functionality: fully functional, throat depth: 180 mm, spindle speed (min.): 480 rpm, overall weight: 65 kg, Bench Drill Manufacturer: IXION Model: BT 13 Technical Data: Manufacturer: IXION Model: BT 13 Year of manufacture: Spindle speeds: 480 – 850 – 1400 – 2300 – 4000 rpm Drilling capacity: max. 13 mm in steel Table size (base): 230 x 170 mm Swivel table: 230 x 170 mm Drilling depth: 70 mm Tool holder: B 16 or MK 2 Throat depth: 180 mm T-slots: 10 mm Power: 1.5 kW Dodpfjw Ug Dqsx Addecr Weight: 65 kg Dimensions: L 0.4 x W 0.5 x H 0.855 m All information subject to change and without guarantee. A powered demonstration is possible at any time in our showroom.

Condition: new, Continuous drilling capacity in St 60: 15 mm Normal drilling capacity: 18 mm Tapping capacity: M 8 spindle: MK 2 drilling depth: 80 mm throat depth: 180 mm spindle speeds infinitely variable 200 - 4,000 rpm spindle speeds for threads 200 - 700 rpm distance spindle/table: up to 380 mm table surface: 250 x 220 mm Dodpfxsb Eldns Addecr column diameter: 65 mm total height: 910 mm weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full threading device and programmable digital display machine in stock and immediately available

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Dodpfxotrpiie Addocr Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: good (used), Drilling capacity: up to 10 mm Spindle mount: drill chuck Speed range: Diameter pulleys Motor side: Spindle side: 38; 48; 66; 78 mm 90; 104; 120; 133 mm Motor speed: 800 rpm Dodpfx Aoh Hrkisddecr stroke: 100 mm throat: 300 mm table: 400 x 400 mm distance table - drill chuck max: 580 mm distance table - drill chuck min: 130 mm table: 400 x 400 mm footprint: 750 x 480 mm total power: 0,4 kW accessories/equipment: drill chuck Condition: good weight: 170 kg dimensions: 750 x 480 x 1.450 mm

Condition: new, Motor ----- 900W - 230V - 1Phase / 900W - 400V - 3Phase Speed ----- 2950 O/min Stone dimensions ----- 200 x 32 x 32 mm Coarse stone grain 36 Fine stone grit 80 Safety class ----- IP40 Weight ----- 25 kg OPTIONS Dcedpfx Asga Tw Uoddor * Base cabinet

Condition: used, machine/vehicle number: 1231566, grinding wheel Ø: 300 mm grinding wheel width: 40 mm electrical connection: 380 V, 1,5 kW Dsdpjbuaa Esfx Addecr space needed: 700 x 400 x 1150 mm

Condition: new, TURBO-BOOST-TEST turbocharger boost testing bench allows for professional turbocharger calibration and performance evaluation. The test bench can be used in turbine tuning and refinement, in the manufacture of hybrid turbines, to test changes in turbine performance after tuning. Our test benches are advanced systems for turbocharger tuning and testing in dynamic mode. Its provide turbocharger testing under near realistic operating conditions, ensuring full process control and detection of any potential problems, including oil leaks. HIGHLIGHTS • Complete finish testing and tuning of automotive turbochargers for engines up to 3 liters • Dynamic turbocharger testing • Installation on the regular surfaces of fastening • Running in and check on an oil leak • Tuning of electronically driven turbos is done by connecting to an external tester ATP-3000 • Installation of turbochargers of any design KEY FEATURES • More than 2000 turbo references database • Calculate turbocharger performance; • Plot supercharging vs. inlet and outlet flow graph; • Generating the resulting graph; • Testing of actuator performance: vacuum, pneumatic and electric types; • Diagnosis of servo-drives of electric actuators (optional); • All measurements are done in real time. • Calibration of the test bench before starting work • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Boost Test software. • Creation and printing of reports on the tuning process. • Self-diagnostics SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dcedpjttg S Uefx Addor Dimensions 1330 х 770 х 1440 mm Weight 265 kg

Condition: new, Motor ----- 500W - 230V - 1Phase Speed ----- 2950 O/min Stone dimensions ----- 175 x 25 x 32 mm Coarse stone grain 36 Fine stone grain 80 Dodpfx Ajga Tw Roddecr Safety class ----- IP40 Weight ----- 17 kg OPTIONS * Base cabinet

Condition: used, respectively Grinding wheel dimensions: 175 x 25 x 51 mm Grinding wheel speed: 2900 rpm Dcjdpfsdqgmwex Adder mounted on a common base

Condition: new, GEOMET-2000 flow bench for calibrating a variable nozzle turbocharger without shaft rotation. This flow bench can calibrate the geometry of vacuum, air and electronically controlled turbochargers. The equipment is adapted to the needs of workshops for repairing turbochargers of trucks and cars. It is also designed to work with large-sized or non-standard turbocharger designs; Flowbench GEOMET-2000 will allow a regular workshop to provide professional turbine repair services, thus gaining more customers. HIGHLIGHTS Adjusting the end stop position of the air flow control mechanism (variable geometry) will eliminate the "overblowing" effect, which is detrimental to the engine. Adjusting the length of the actuator rod to adjust the actuation timing of the air flow control mechanism. Evaluating the spring elasticity of the actuator for in-depth diagnostics of vacuum and pneumatic actuators. Dcedpfxen E N E Es Addor Checking the operation of the N75 valve for turbines with vacuum valve, which is involved in controlling the turbocharger on the vehicle. Tuning of electronically driven turbos is done by connecting to an external tester ATP-1000. Vertical position of the turbocharger and free working area - comfortable and efficient work with all types of turbochargers. KEY FEATURES • More than 6200 turbo references database • Creation of a test plan for a new turbine from the manufacturer. • All measurements are done in real time. • Calibration of the test bench before starting work • Automatic atmospheric pressure and temperature compensation • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Turbo Test software. • Creation and printing of reports on the tuning process. • Quick turbine installation thanks to magnetic adapters • Self-diagnostics SPECIFICATIONS Maximum productivity of the vacuum pump 180 m3 Required pressure in the pneumatic system 0,6 – 0,8 MPa Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1190 х 520 х 1730 mm Weight 255 kg

Condition: ready for operation (used), Height-adjustable workbench with parallel vice, make "WERKSTOCK" with various exchangeable clamping jaws table rotatable, size: 650 x 650 mm Height adjustment: 750 - 1200 mm vice Dcodpjdyp R Hefx Addsr jaw width: 130 mm Clamping width: 150 mm

Year of construction: 2025, condition: new, GeoBoost-7000 Combined bench for turbocharger geometry calibration and performance evaluation. Stand for static and dynamic calibration and testing of turbocharger. It has a combined two-position design, which allows testing the turbocharger in two modes - rapid static calibration of turbocharger geometry - Full dynamic diagnostics at different operating modes GeoBoost-7000 will allow you to carry out professional testing of turbocharger operation during repair, tuning or modernization. The availability of two working zones of the machine depending on the testing method helps to carry out comprehensive diagnostics. HIGHLIGHTS • Simulates real-world operating conditions for accurate turbocharger diagnostics and tuning. • Flexible and versatile to work with a variety of turbocharger models. • All types of turbochargers can be installed using the accessories provided. • Oil leak testing using heated oil and compressed air. • N75 turbocharger control valve testing. KEY FEATURES - Ability to adjust the extreme position of the blades of the air flow control mechanism. - Adjusting the length of the stem to adjust the actuation torque of the air flow control mechanism. - Real-world turbocharger testing; - Real-time geometry tuning; - Performance testing of actuators: vacuum, pneumatic and electric types; - Diagnosis of servo-drives of electric actuators (optional); - Post-assembly testing of the turbocharger for oil leakage; - Availability of a high capacity vacuum pump to create the required vacuum and air flow. - Testing the turbine according to the manufacturer's test plan; - Calculate turbocharger performance; - Plot supercharger inlet and turbocharger outlet boost vs. flow; - Construct the resulting graph; - Generate and print test reports. SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1700 х 900 х 1500 mm Weight 400 kg Dcjdpfevtn Hmox Adder

Condition: used, machine/vehicle number: 053051, grinding area: 200 x 25 mm electrical connection: 380 V, 0,5 kW space needed: 550 x 450 x 1100 mm Dcsdsbfp Ixspfx Adder weight: 95 kg

Condition: good (used), machine/vehicle number: 12 230091, Grinding wheel dimensions: 300 x 40 x 76 mm grinding wheel speed: 1400 rpm grinding wheel drive: 380 V, 1,5 kW Weight approx.: 85 kg Dcsdecwwm Tspfx Addsr Space requirement: 720 x 470 x 400 mm