Used Platen for sale (556)

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Machine KraussMaffei KM650-4300 GX Clamping force kN: 6500 Clearance between tie bars ( h x v ) mm: 1110 x 960 Mould opening stroke mm: 1450 Mould height min. mm: 450 Mould height may. mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (mixing HPS-M) L/D ratio: 20 Injection pressure bar: 1839 Stroke volume cm3: 2290 Control version: MC5 Screen text: Germany Condition: Checked, ready to work Equipment: \- Anti-vibration levelling pads \- BluePower - Servo pump drive for lower energy consumption \- Wear resistant plasticizer, surcharge \- BluePower - Complete insulation of plasticizing cylinder for lower energy consumption \- 2 x pneumatic valve on moving platen for blow function \- 2 x pneumatic valve on fixed platen for blow function \- Pneumatic cascade control, 4-fold for hotrunner \- Hydraulic cascade control, 4-fold for hotrunner \- Conveyor control \- Mechanical robot interface according to EUROMAP 18 \- Hydr. actuated ejector plate including tapped holes and clearance holes in the moving platen for ejector bolts \- Hydraulic core pull system 2-fold on moving platen \- Hydraulic core pull system 2-fold on fixed platen \- Pneumatic core pull system 1-fold on moving platen \- Pneumatic core pull system 1-fold on fixed platen \- Pressure relief for hydraulic core pulls \- Pressure relief for hydraulic cascade valves \- 20 hotrunner control circuits \- Combination of sockets (3 Sockets, single phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) \- Potential-free contact for signal "plasticizing" on socket HAN 3 A \- Switch over to holding pressure depending on cavity pressure (Kistler) \- Quality statistics \- Chip card reading unit \- Graph display and analysis package with 10 graphs \- Trend graphics \- PV-closed loop control Hodpfx Aey Apdqji Denl \- Interface for production data consisting of 5 potential free contacts inside the control cabinet \- 3 free programmable in- and outputs in the control cabinet: KraussMaffei Linear Robot LRX 350: \- Fully integrated control \- Horizontal stroke: 4000 mm \- Vertical stroke (telescopic): 2000 mm \- Demolding stroke: 1200 mm \- Maximum payload: 35 kg

Year of construction: 2024, condition: excellent (used), The ZLC series cold chamber die casting machines have been developed based on over 12 years of experience and are widely used for producing zinc or brass alloy components in sectors such as automotive, electrical engineering, electronics, toys, household appliances, and computers. These cold chamber die casting machines are equipped with high-quality imported hydraulic components, a robust machine frame, tie bars made from high-tensile alloy steel, and industry-specific control systems. Key advantages include advanced design, precision manufacturing, rapid response, easy operation, reliability, safety, and low energy consumption. The machine comprises a control system, hydraulic system, lubrication system, cooling system, clamping system, injection system, machine frame, safety door, and more. Its primary function is to extract a precise quantity of molten metal from a separate furnace, pour it into the injection sleeve, and, under high pressure, inject the completely molten alloy into a mold mounted on the platen. The die closes and the high pressure is maintained until the alloy fully solidifies inside the mold. Hodpfey A Hnyox Ai Dsnl

Condition: ready for operation (used), Year of construction: 2002, clamping force: 500 kN, screw diameter: 40 mm, total width: 1,480 mm, total height: 2,048 mm, overall weight: 7,400 kg, product length (max.): 4,860 mm, Hydraulic injection moulding machine manufactured in 2002. This Engel VICTORY 500/120 features a robust design with a weight of 7400 kg. It includes an integrated keypad and screen for user-friendly control. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 500/120 machine we have for sale. Contact us for further details. • Screw Diameter: 40 mm (Selected option) • Screw Length (L/D): 20 • Plasticizing Capacity (Standard): 32 g/sec • Plasticizing Capacity (Barrier): 44 g/sec • Dosing Stroke: 200 mm • Screw Speed: 20-400 r/min • Injection Rate: 198 cm³/sec • Max. Stroke Volume: 251 cm³ • Spec. Injection Pressure: 1300 bar • Spec. Injection Pressure (Increased): 2050 bar • Nozzle Stroke: 300 mm • Nozzle Contact Force: 50 kN • Heating Power: 9.2 kW • Number of Heating Zones: 4 (including nozzle) • Clamping Force: 500 kN • Opening Stroke: 500 mm • Ejector Force: 40 kN • Ejector Stroke: 130 mm • Mold Height Min.: 300 mm • Max. Platen Distance: 800 mm • Mold Mounting Platens Size: 740 x 470 mm • Enlarged Mounting Platens: 740 x 680 mm • Ejection Width: 500 mm • Dry Cycle (Euromap 6): 1.6 sec - 200 mm • Pump Drive Power: 18.5 kW • Oil Capacity: 300 l • Net Weight (without oil): 7400 kg • Dimensions (LxWxH): 4.86 x 1.48 x 2.048 m • Control interface: Integrated keypad and screen (Engel branding) • Power switch: Manual rotary main switch (labeled "Do not actuate under load") Hnsdpfx Aijy Hhwds Dsl

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, clamping force: 500 kN, Clamping Force: Max. 500 kN. Distance Between Tie Bars: 320 x 320 mm. Opening Force | Stroke: Max. 130 kN | 350 mm. Hodpfjy Aybyjx Ai Donl Mould Height (fixed | variable): Min. 200 mm. Platen Daylight (fixed | variable): Max. 550 mm. Mould Mounting Platens (w x h): Max. 446 x 446 mm. Weight of Movable Mould Half: Max. 180 kg. Ejector Force | Stroke: Max. 30 kN | 125 mm.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, clamping force: 1,000 kN, GERMANY ARBURG ALLROUNDER 420 C Machine Model: ARBURG ALLROUNDER 420 C GOLDEN EDITION Tie Bar Distance: 420 × 420 mm Clamping Force: 1000 kN Hsdpfxoy Awqfj Ai Donl Injection Unit (EUROMAP): 290 Opening Force: 250 kN Maximum Opening Stroke: 500 mm Platen Opening: 750 mm Mould Mounting Platens: 570 × 570 mm Ejector Force: 40 kN Ejector Stroke: 175 mm Material Throughput (PS): 20.5 – 24.5 kg/h Material Throughput (PA6.6): 10.5 – 12.5 kg/h Holding Pressure: 2500 / 2000 / 1530 bar Nozzle Contact Force: 60 kN Nozzle Retraction Stroke: 240 mm Machine Net Weight: 3650 kg

Condition: good (used), Year of construction: 2002, operating hours: 78,964 h, clamping force: 3,500 kN, screw diameter: 50 mm, clearance between the columns: 650 mm, displacement volume: 1,040 cm³, injection pressure: 1,575 bar, Make: Ferromatik Milacron Type: K- TEC 350- S Built: 2002 Location: Poland Technical Data Screw Dia: 50 mm Swept Volume: 1040 ccm Injection Pressure: 1575 bar Clamping Force: 3500 kN Tie Bar Distance: 650 x 650 mm Platen Size: 970 x 970mm Power: 83,1 kW Workinghours: 78964 h Dimensions: 8 x 1,8 x 2,5 m Weight: 16.000 kg Equipment Language: German , English Manual: Yes Airvalve : 4x Hedpfey Dcw Tex Ai Djnl

Condition: good (used), Year of construction: 2007, Ref. no.: 18588 Hersteller: BATTENFELD Type: EM 30/55 Unilog B6 Run hours: 3.200 Electric machines Year of construction: 2007 Clamping unit Clamping force: 30 ton Distance between tie bars: 300 x 300 mm Mould height min.: 150 mm Mould height max.: 330 mm Opening width: 580 mm Platen size (h x v): 450 x 450 mm Hnjdpoxdk Auefx Ai Del Injection unit Screw diameter: 18 mm Injection volume: 19 cm³ Shot weight: 17,5 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,5 x 1,1 x 1,9 m Machine weight: 2700 kg Further information: BATTENFELD EM 30/55 UNILOG B6 All-Electric Precision Injection Moulding Machine The offered BATTENFELD EM 30/55 UNILOG B6 is an Austrian-made all-electric injection moulding machine designed for applications requiring high precision, low energy consumption and stable production performance. The BATTENFELD EM series was considered one of the most advanced servo-electric injection moulding technologies of its time. All main machine movements are driven by servo motors, providing: * very low energy consumption * high repeatability and precision * quiet machine operation * low maintenance requirements The machine is especially suitable for: * technical plastic parts * medical products * electronic components * small precision parts Thanks to its all-electric drive technology, the machine offers: * significantly lower energy consumption compared to hydraulic machines * clean production environment * stable cycle times * precise dosing and excellent process stability The machine is equipped with the modern BATTENFELD UNILOG B6 control system featuring a user-friendly interface and precise process management. With only approx. 3,200 operating hours, the machine has exceptionally low usage for its production year. The BATTENFELD EM 30/55 UNILOG B6 is an excellent solution for companies looking for precise and energy-efficient plastic production technology.

Condition: good (used), Year of construction: 2006, operating hours: 40,000 h, functionality: fully functional, screw diameter: 40 mm, Injection moulding machine type Demag ET80-430-B2 for sale. The machine comes from a laboratory and was only used for material sample testing. Very clean condition. Works perfectly. Includes documentation and all diskettes. Hnjdpfoy N I Ubox Ai Del - Year of manufacture: 2006 - Approx. 44,600 operating hours - Screw diameter: 40 mm - Max. distance between platen plates: 700 mm - Min. mould height: 250 mm - Injection pressure: 2,025 bar - Ejector stroke: 150 mm - Without hopper Loading by forklift. More photos to follow. Please feel free to contact with any questions.

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Hnsdpfjpbvqvsx Ai Dol Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Year of construction: 2007, condition: ready for operation (used), Clamping force: 1800kN, screw stroke: 200mm, speed: 300rpm, L/D: 20, nozzle stroke: 400mm, nozzle contact force: 50kN, hopper volume: 80l, tie-bar spacing: 520mm/520mm, platen dimensions X/Y: 760mm/760mm, mold installation height range: 250mm-600mm. Machine dimensions X/Y/Z: 6200mm/1700mm/2750mm, weight: approx. 12000kg, operating hours (Nov. 2025): 27271h. Including handling and protective enclosure. Documentation available. An on-site inspection is possible. Hnsdpfx Aey N Uwcji Djl

Condition: excellent (used), Year of construction: 2004, operating hours: 96,830 h, clamping force: 1,200 kN, screw diameter: 40 mm, injection pressure: 1,300 bar, injection weight: 231 g, Engel Victory 500/120 Tech (145) without hopper General information Product Code: 145 Availability: In Stock Year of production: 2004 Brand: Engel Technical data Shot Weight: 231 g Clamping Force: 1,200 kN Screw dia: 40 mm Injection pressure: 1300(2020) bar Hodpfx Ajvt Sbbsi Donl Tie bar distance: Tie-bar less Platen size: 740 x 680 mm Type of controls: CC200 Language: German Power: 41 kW Workinghours: 96830 h Weight: 7400 kg Dimensions: 5 x 1,7 m Hopper: No Core pull: Yes Euromap: Yes

Condition: like new (used), Year of construction: 2008, operating hours: 61,300 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, pressure: 2,429 bar, Here we are offering the following well-maintained used injection moulding machine as part of our injection moulding machinery trading business. Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onward. We have been a wholesale dealer of injection moulding machines for over 25 years. ++++From Pharmaceutical Cleanroom Production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX International size designation: 380 EX / 120 Machine no.: 61011287 Year of manufacture: 2008 Machine hours: 61,300 h Control system: MC5 Technical data - Clamping unit Clamping force: 1,200 kN Tie bar spacing H x V: 470 x 470 mm Platen size H x V: 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. platen distance: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centric ring for moving platen D: 160 mm Centric ring for fixed platen D: 125 mm Mould weight: 1,485 kg Technical data - Injection unit Screw diameter: 35 mm Stroke volume: 156 ccm Injection pressure: 2,429 bar Screw length: 23 l/d Screw speed: 289 rpm Plasticising rate: 27 g/s PS Free shot weight: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 6 m x 1.7 m x 2.19 m Total weight: 9,700 kg Equipment Display language German Display language English +++Extras++++ Automation: Handling unit / extraction robot included – Handling: LR 100-2300 Conveying equipment: roller conveyor included CE marking: available Complete maintenance and inspection history Full latest test report Incl. conveyor belt, incl. cage Machine with water battery Machine without material hopper Levelling elements EUROMAP 12 interface Electrics Schuko socket 10A CEE socket 16A Voltage: 400 V Hnsdpfx Asy D Adtei Dol Frequency: 50 Hz Motor current: 80 A Warranty Warranty up to first commissioning Loading / Shipping Free loading onto buyer's truck or free delivery within Germany subject to freight reimbursement Available ex stock Hanover, Germany

Condition: ready for operation (used), Year of construction: 2011, clamping force: 4,200 kN, screw diameter: 80 mm, injection weight: 1,464 g, total height: 2,500 mm, overall weight: 25,500 kg, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, product length (max.): 7,300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. A robust hydraulic injection molding machine from Germany, it features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. Ideal for high-volume production with its 1200 cycles/h dry cycle rate. Contact us for more information about this machine. Hnsdpeydnp Hjfx Ai Dol • Electrical data: • Power supply: 400 V / 3N~ / 50 Hz • Installed heating power: 36 kW • Rated pump motor power: 75 kW • Number of barrel heating zones: 7 • Performance and control: • Dry cycles (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 • Machine color: grey / white / blue • Clamping unit: • Mold opening force: 249.6 kN • Distance between tie bars: 800 × 800 mm • Moving platen force (open/close): 124.7 / 102.4 kN • Platen dimensions: 1270 × 1200 mm • Mold opening stroke: 1020 mm • Minimum mold height: 380 mm • Ejector stroke: 250 mm • Platen opening stroke: 1400 mm • Injection unit: • Nozzle tip radius: 15 mm • Nozzle orifice diameter: 6 mm • Injection pressure: 1856 bar • Injection volume: 1608 cm³ • Injection rate: 478 cm³/s

Condition: ready for operation (used), Year of construction: 2019, clamping force: 6,500 kN, screw diameter: 60 mm, overall weight: 6,500 kg, controller manufacturer: ENGEL, This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine. Additional equipment • Oil Reservoir Capacity - Injection Unit: 500 l • Maximum Cooling Power (32°C Water Inlet): 29.40 kWcool • Water Consumption (32°C): 4.80 m3/h Machine Benefits Qualitative Machine Benefits • The machine has electric water batteries (4 e-flomos with 8 circuits each). • The injection units are fitted with accumulators which enable a high injection pressure of up to 2400 bar with a 60 mm screw. Technical Machine Benefits • Maximum injection capacity: 890 cm³ • Screw torque: 2000 nm // maximum screw speed @ reduced torque: 275 min-1 • Reduced torque @ maximum screw speed: 1600 nm • Recovery rate (3-zone screw): 51 g/s // recovery rate (barrier screw): 67. 1 g/s • Injection rate: 353 cm³/s • Nozzle stroke: 950 mm • Ld ratio: 24. 0 • Heating zones incl. Nozzle: 8 // heating wattage: 27. 5 kwel • Opening force with pressure pad: 510 kn • Maximum distance between platens: 1750 mm Extra Information Dimensions & Weight • Drop Out Chute Width: 1100 mm • Weight of Clamping Unit: 20,000 kg • Maximum Mold Weight (Moving Platen): 7,330 kg • Maximum Mold Weight (Stationary Platen): 7,330 kg • Maximum Mold Weight (Total): 11,000 kgCycle Data (Euromap 6) • Stroke: 700 mm • Dry Cycle Time: 2.9 s Control System: Monocompute CC300 Main Features • 21.5” full HD touchscreen • USB interface / Ethernet connection • E-move control element • 3 keycards for user login • Graphic symbols for cycle control • Screen languages: German, English • Acoustic error signal / Signal light for error displayPrograms & Monitoring • Power Control: optimizes motor performance during dispensing • Mould parallelism measurement • IQ Weight Monitor: monitors shot weight & viscosity • IQ Weight Control: automatic injection parameter adjustment during fluctuations • Quality monitoring interface (injection time, dosing time, pressure, cycle time) • Continuous ejection possible when monitoring is deactivated Clamping Unit & Plates • Reinforced clamping plates (FAP & BAP +50 mm each) • Reduced min./max. tool height and panel distance (–100 mm due to reinforcement) • FAP: smallest possible platen opening, spherical calotte minimized Hsdpoy D Npcofx Ai Donl • BAP: without ejector opening • Additional threads according to EUROMAP VOL1 • Centering grooves according to drawing • Plate ejector – Variant A (adapted to clamping pattern) • Safety interface for ejector Hydraulics & Core Pulls • Hydraulic core pull: • 1-fold on moving platen • 2-fold on fixed platen • 2-fold on moving platen with PQ proportional valve, volume measurement, pressure/speed adjustment • Interface for intermediate core pull position Mold Heating & Cooling • Mold heating: 16 circuits, max. 40 kW heat output (Euromap 14) • Temperature monitoring interface (moving & fixed platen) • 4-fold hydraulic mold nozzle control • Separate cooling water connection (tool & machine) • Temperature control unit interface: Engel protocol, 20 mA current loop • 4-way flow regulator (0–10 l/min) • Hose specification: max. 90 °C / 4 bar • Hoses for mold cooling

Condition: used, Year of construction: 2000, pressing force: 260 t, stroke length: 250 mm, table width: 840 mm, table length: 1,500 mm, air pressure: 9.807 bar, compressed air connection: 9.807 bar, ram adjustment: 120 mm, We are offering this used Chin Fong OCP-260N eccentric press with double column, year of construction 2000. Model: OCP-260N Factory number: A00373 Year of construction: 2000-11 Capacity: 260 tons Stroke frequency: 20–40 strokes/min Stroke: 250 mm Maximum die height: 500 mm Upper bolster clearance: 7 mm Slide adjustment (range): 120 mm Upper platen surface (L × W): 1130 × 700 mm Lower platen surface (L × W): 1500 × 840 mm Main motor power: 22 kW Poles: 4 Hjdpoykbcmefx Ai Djnl Machine weight: 31.8 tons Compressed air pressure: 9.807 bar Oil temperature max.: +100 °C Oil temperature min.: -10 °C Oil volume: 180 liters If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Type Combi 12110 TF continuous grilling line all stainless steel bottom contact grilling + hot air suitable for steam injection belt width 1.100 mm Hjdpfjy E H Acjx Ai Dsnl net length 11.000 mm underplate max. 260°C air temperature max. 280°C dimensions (l x w x h) : ± 13.500 x 1.700 x 2.400 mm independent platen – air temperature and steam control adjustable speed PLC control Siemens frequency (new hard- and software, frequency inverters) With new Teflon belt suitable for thermic oil heating (± 600 kW) with belt wash system

Condition: good (used), Spindle: 130 mm Travel X: 5000 mm Travel Y: 2500 mm Travel Z: 1000 mm Rotary table: 2000 x 2500 mm, approx. 30 tons With faceplate Hnodpfoy D Tvgox Ai Djl Vertical head Some tools included Without platen field

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,400 mm, feed length X-axis: 7,000 mm, feed length Y-axis: 1,600 mm, feed length Z-axis: 1,400 mm, Complete with all assemblies required for installation and commissioning x = 7 m y = 1.6 m z = 1.4 m (800 mm + quill = 600 mm) General overhaul in 2007, year of manufacture 1991 Rapid traverse: 12,000 mm/min; w-axis: 6,000 mm/min Fitted with new Siemens Sinumerik 840D control system, new drive motors, refurbished guideways, and new control cabinets. ECOCUT 1 was only operated for a few hours thereafter. TDV 2 rotary table, max. workpiece weight 6 t / clamping area 1,000 x 1,000 mm Hodpfx Ajy I S E Usi Donl TDV 3 rotary table, max. workpiece weight 12 t / clamping area 1,250 x 1,600 mm Accessories: 2 right-angle milling heads / chain-type automatic tool changer / platen table / full enclosure / Knoll hopper feeding system / extraction unit / coolant system with belt filter. Supplied with all BWF fixtures required for installing the machine bed and clamping plate.

Condition: excellent (used), Year of construction: 2016, Clamping force (kN): 1600 Opening stroke (mm): 460 Mould height (min–max) (mm): 250 – 600 Platen size (mm): 760 × 760 Tie bar distance (mm): 520 × 520 Ejector stroke / force (mm / kN): 150 / 40 Dry cycle time (sec): 1.4 – 320 Screw diameter (mm): 30 Screw stroke (mm): 160 Hedpoyyz Ddefx Ai Denl Shot volume (cm³): 113 Screw speed (rpm): 420 L/D ratio (3 zones): 23.6 / 20.0 Plasticizing capacity (g/sec): 15 / 22 L/D ratio (barrel): -29 Plasticizing capacity (barrel) (g/sec): -29 Injection flow (cm³/sec): 157 / 214 Injection pressure (bar): 2400 / 2000 Nozzle stroke / force (mm / kN): 225 / 28 Drive / Power Pump motor power (kW): 16.91 Working hours 13.227 h Type: Multicomponent Drive: Electric

Condition: excellent (used), Year of construction: 1998, clamping force: 2,000 kN, screw diameter: 45 mm, injection pressure: 2,500 bar, injection weight: 240 g, mold height (min.): 250 mm, Arburg 520C-2000-675 (154) Hedpfevtzmtox Ai Donl without hopper General information Product Code: 154 Availability: In Stock Year of production: 1998 Brand: Arburg Technical data Shot Weight: 240 g Clamping Force: 2,000 kN Screw dia: 45 mm Injection pressure: 2500 bar Tie bar distance: 520 x 520 mm Platen size: 715 x 715 mm Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 44,9 kW Workinghours: 126766 h Weight: 6630 kg Dimensions: 5,6 x 1,7 m Euromap: Yes Air valve: Yes

Condition: excellent (used), Year of construction: 2005, clamping force: 1,300 kN, screw diameter: 35 mm, injection pressure: 2,500 bar, injection weight: 127 g, Arburg 470S-1300-350 (170) hybrid with electric screw drive, without hopper General information Product Code: 170 Availability: In Stock Year of production: 2005 Brand: Arburg Technical data Shot Weight: 127 g Hnjdpfx Aiovt Tn No Djl Clamping Force: 1,300 kN Screw dia: 35 mm Injection pressure: 2500 bar Tie bar distance: 470 x 470 mm Platen size: 650 x 650 mm Mould height min.: 275 mm Type of controls: Selogica Language: German Power: 33,9 kW Workinghours: 85.400 h Weight: 5.100 kg Dimensions: 5 x 1,8 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes

Condition: excellent (used), Year of construction: 1999, operating hours: 95,616 h, clamping force: 1,300 kN, screw diameter: 45 mm, injection pressure: 1,670 bar, injection weight: 194 g, Arburg 520C-1300-350 (163) with bimetallic plasticizing unit General information Product Code: 163 Availability: In Stock Year of production: 1999 Brand: Arburg Technical data Shot Weight: 194 g Clamping Force: 1,300 kN Screw dia: 45 mm Injection pressure: 1670 bar Tie bar distance: 520x520 mm Platen size: 715x715 mm Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 32,2 kW Workinghours: 95616 h Weight: 6380 kg Dimensions: 5,1x1,9 m Hopper: No Hsdpevt Rvdjfx Ai Denl Core pull: Yes Euromap: Yes

Condition: used, Atom G222 STVL Clicking Press, Bed Area 900 x 430mm, Top Platen Area 370 x 530mm. Serial No. 75161. Country of Origin: Italy Hodpoy Shg Ajfx Ai Dsnl Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2002, Kiefel KMD 75 BFSS Universal Automatic Roll-Fed Thermoforming Machine, Forms, Punches & Stacks Formed Containers, Sheet Width Approx. 700mm, Infeed Roll Feeder KVH83, Oven, Machine Platen Size 590 x 900mm, Outfeed Scrap Reel, ICS IC410 3 Fan Chiller Unit. Serial No. 203-031 (2002). Country of Origin: Germany Hnedpfx Asy Shbyji Djl Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2017, condition: ready for operation (used), Used door panel production - consisting of: Double-End Profiler Brand: Kraft Technical Specifications - 2 scissor lift tables - 2 vacuum grippers - Feed roller conveyor with belt conveyor - New Siemens touch control system 13 roller conveyor sections Brand: Kraft Technical Specifications - Powered, approx. 3000 mm each Continuous Inlay Special inlay line Gantry loader Brand: Kraft Year of manufacture: 2023 Technical specifications - For separating, aligning, and placing HPL Glue applicator Brand: Bürkle Year of manufacture: 1990 Glue applicator Brand: Kuper Year of manufacture: 2018 Hsdpfxsy Dutmj Ai Djnl Laying table Technical data - Work platform for glue tanks, including staircase - Lifting station - motor-driven - Includes PVC conveyor belt Continuous-feed platen press Brand: Bürkle Optima 1428/50 Year of manufacture: 2017 Technical data - Start of series production in 2023 - 2 x 4 levels with a pressing area of 1400 x 2800 mm - With automatic feeder (manufacturer: Bürkle) - Removal device (manufacturer: Bürkle) Hedgehog buffer Technical specifications - For temporary buffering of semi-finished door panels - Total length approx. 14,000 mm - Solid steel construction - Approx. 200 individual compartments Storage and transport system Brand: Kraft Technical data - Powered storage and transport roller conveyor - Roller width 1000 mm - Total length approx. 120 running meters 3 automatic cross-transfer carriages Brand: Kraft Year of manufacture: 2018 Technical data - Roller width approx. 1400 mm - Transfer length: 2900 mm Horizontal shredder Brand: Reinboldt Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. • Offer: Used door leaf production line • Main machine: Continuous-action stack press • Technical specifications: • 2 x 4 tiers • Pressing area: 1400 x 2800 mm Additional equipment • Automatic Bürkle feeding system (for the press) • Bürkle removal device (for the press) • Panel rack • Manufacturer: Robering • Model: Dexion P90 Plus • Year of manufacture: 2021 • Technical specifications: • 8 uprights • Height: approx. 6000 mm • Max. permissible shelf load: 3000 kg • 2x Tilting hoppers • Manufacturer: Bauer • Model: WU-R1500 • Year of manufacture: 1998 • Technical specifications: • Capacity: 1.5 m³ • Hedgehog buffer • Technical specifications: • Solid steel construction • Approx. 200 individual compartments • KRAFT storage and transport system • Roller conveyor: • Roller width: 1000 mm • Total length: approx. 120 running meters • 3 automatic cross-transfer carriages (built in 2018): • Roller width: approx. 1400 mm • Transfer length: approx. 2900 mm