Used Platen for sale (464)

Condition: like new (used), Year of construction: 2015, Arburg 320 C 500-170 (2015) Golden edition Working hours : 40.167 h Clamping force: 50 t Screw diameter : 30 mm Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW Machine length: approx. 3.4 m Crjdpfxexqdxij Addjk Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2 400 kg 2 pumps machine

Condition: ready for operation (used), Year of construction: 1998, Stock-No. 13610 Manufacturer Krauss Maffei Type of machine KM 110 – 390 C2 Year 1998 Working hours h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Crodpfxeub S Uls Addsk Clamping unit: Clamping force 1100 kN Mould opening force, max. 70 kN Travel force movable platen opening 35 kN Travel force movable platen closing 28 kN Size of mould platens (h x v) 745 x 770 mm Distance between tie bars (h x v) 470 x 470 mm Mould opening stroke 600 mm Mould height min 300 mm Max. daylight 900 mm Hydraulic ejector - stroke 150 mm Ejector force 22/10 kN Injection unit: Screw diameter 35 mm Ls/D ratio 23 Injection pressure 2429 bar Stroke volume 156 ccm Shot weight (PS) 142 gr. Injection rate 123 ccm/s Screw speed 391 1/min Plasticising rate max. 22 g/s Nozzle pressure 84 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 18,5 kW Installed heating capacity 12 kW Adjustable barrel heating zones 5 Reservoir capacity 345 ltr. Dimensions and weights: Dimensions of the machine ca. 4,50 x 1,60 x 2,00 m Total machine weight 6000 kg Max. mould weight 1485 kg Accessories: - Anti vibration pads - 6 x Water flow Additional Options: - 2 x air valve - 2 x core pull - Robot interface according to Euromap 12 - Electrical screw drive - Accumulator

Condition: excellent (used), Year of construction: 2004, Engel ES 3550/600 HL Technical Data Year of manufacture: 2004 Clamping Unit: Clamping force: 6000 kN Crsdpjxu Hnbofx Addek Platen size (W x H): 1480 x 1300 mm Minimum mould height: 500 mm Maximum mould height: 1700 mm Opening stroke: 1200 mm Ejector stroke: 250 mm Ejector force: 110 kN Injection Unit: Screw diameter: 80 mm Shot volume: 1960 ccm Specific injection pressure: 1730 bar Screw length: 22 l/d Dosing stroke: 390 mm Number of heating zones: 6 Nozzle stroke: 700 mm

Condition: excellent (used), Year of construction: 2016, operating hours: 33,500 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 30 mm, clearance between the columns: 370 mm, column diameter: 35 mm, displacement volume: 144 cm³, Equipment: documentation/manual, Plasticizing cylinder assembly 35 mm (without nozzle) in highly wear-resistant version Servo-controlled, programmable nozzle unit for injection unit 1 Highly accurate and reproducible mold positioning through electromechanical servo drive Hydraulic core pull control for simultaneous, regulated movements; for both sequential and simultaneous movements, pressure and flow are programmable. Connections located on the moving platen. Cjdpfxexywxuj Addsrk Electromechanical, position-controlled ejector Blow-off device 1 with pressure regulator Electric mold height adjustment for adaptation to different minimum mold heights, adjustment range directly programmable via SELOGICA control Electric, programmable conveyor belt Sorting unit for separating good and reject parts during production, installed longitudinally below the clamping area "Extended Monitoring" equipment package: Expansion of mechanical process monitoring for mold and machine for complex applications "Extended Movement Functions" equipment package: Increased number of movement steps and intermediate stop functions Freely configurable page for "Startup Parameters" to allow a selectable number of cycles to run with parameters different from the production parameters. Additional socket combination, with 1 Schuko and 1 x CEE via automatic cutoff (1 standard included, max. 1 additional possible) Extended mold protection 6 electric heating control circuits for mold heating, each max. 2 kW / 230 V Interface for a coloring/dosing unit (volt-free contact) "Quality Assurance" equipment package Tie-bar extension +100mm for mold installation height Integral picker Machine is sold without material feed and peripheral devices.

Year of construction: 2006, condition: excellent (used), Bobst Autoplatine Speria 106 E STANDARD EQUIPMENT MACHINE - Centerline system for quick job changeover. - Electronic sheet travel monitoring system. - Adjustable centering at the stripping station. - Control cabinet air conditioning unit. - Bobst electronic control system C.U.B.E. (Control Unit Bobst Electronic). This microprocessor-based Bobst system allows the operator to easily manage, visualize, and monitor the machine’s various functions and components. - Main motor with frequency inverter control. FEEDER - Pile tray with handle for easy manual lateral alignment during production. - Synchronization device ensuring proper sheet arrival to the front lays when the machine is stopped. - Automatic pile lifting controlled by pressing foot. - Rear pile guides (operator side and opposite operator side). - Adjustable side blowers with Centerline markings. - Suction unit. FEED TABLE - Feed table with anti-static stainless steel covering. - Feed table entrance equipped with lateral ramps. - Four front lays, pairwise adjustable, with front register control. - "Pull" guide (operator side), adjustable with Centerline markings and side register control. Codpexl Talefx Adderk - Double sheet detector. - Support plates at platen station entry. - Sheet hold-down mechanism (guides sheets to front lays). - Upper frame with manual lifting device. - Upper transport system for paper, paperboard, and corrugated board. - Transport belts with lateral guides and automatic tensioning system. PLATEN - Gripper reopening device. - Centering and locking for equipment. - Locking the chase to the upper beam. - Cutting force measurement with strain gauge. 1 synthetic supporting plate. 1 upper chase: fixed bottom plate. 1 cutting plate. WASTE STRIPPING STATION - Air-cylinder-driven upper frame lifting. 1 upper pull-out frame (with crossbars and clamps). 1 lower pull-out frame. DELIVERY - Pile tray. - Front jogger. - Adjustable rear and side joggers with Centerline markings. - Braking brush. - Manual non-stop rack. AVAILABLE EXTRAS B MACHINE 1 B-1 Raised machine base C FEEDER 1 C-4 Manual non-stop device E PLATEN 1 E-5 Compensating plate 1 E-55 Micro-adjustable supporting plate centering F WASTE STRIPPING STATION 1 F-31 Quick-lock device for the upper pull-out frame

Condition: excellent (used), Year of construction: 2007, Engel Victory 330/60 TECH Injection Moulding Machine Year of manufacture: 2007 Clamping unit: Clamping force: 600 kN Platen dimensions (table): 720 mm Mould height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 mm Injection unit: Csdpfx Adexwviaoderk Screw diameter: 35 mm Shot volume: 154 cm³ Injection pressure: 2,400 bar Machine weight: 5,300 kg

Condition: like new (used), Year of construction: 2014, Arburg 320 C 500-170 (2014) Working hours : 44.124 h Clamping force: 50 t Screw diameter : 25 mm Csdpfjxqdtajx Addork Shot weight : 75 g Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW L 3.4 m x W 1.4 m x H 2.0 m Weight :2 400 kg

Year of construction: 1999, condition: ready for operation (used), A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible. Crodpjxx Uf Aefx Addjk

Condition: ready for operation (used), Year of construction: 2001, operating hours: 70,111 h, functionality: fully functional, Manufacturer ARBURG Description 320 C 600 - 250 Serial Number 186245 Machine Type ALLROUNDER 320 C Control Version SELOGICA 3.030 Tie Bar Distance 320 x 320 mm Clamping Force 600 kN Injection Unit 1 250 Weight 2,330 kg Delivery Date 27 August 2001 Description Quantity CS - Model Size II 1 0001/000 320 C 600 - 250 1 0006/030 Thermoplastics Cylinder, complete, 35 mm, highly wear-resistant 1 0060/035 SELOGICA User Interface 1 0131/002 Software Version 3.x SELOGICA 1 0131/030 Technology Level 2, servo-regulated with 2 control pumps 1 0132/003 Equipment for processing thermoplastics 1 0135/001 Open nozzle, 35 mm 1 0220/035 Nozzle tip for open nozzle 1 0300/000 Heater band for open nozzle 1 0320/000 Clamping platen set 320, central, 125 mm central diameter 1 0356/011 Crsdoxt Rpyjpfx Addjk Sorter unit, longitudinal installation incl. connection 1 0375/000 Programmable conveyor belt in machine base, longitudinal 1 0412/002 euromap robot interface, 32-pin with plug 1 0425/000 Serial interface for printer V24 1 0454/001 OKI dot-matrix printer with serial V24 interface, incl. cable 1 0459/000 3 electric heating control circuits for mould heating 1 0469/003 Low voltage cabinet 400 x 800 1 0500/001 High voltage cabinet 800 x 800 1 0500/004 Shut-off valve for cooling water in supply line 1 1 0501/001 Machine cooling circuits regulated, material feed adjustable 1 0525/002 Software package "Additional monitoring functions" 1 0555/001 Software package "Additional machine movements" 1 0555/002 Software package "Production control" 1 0555/003 Equipment package optimisation / user assistance 1 0555/005 Software package "Quality assurance" 1 0555/006 Software package "Documentation" 1 0555/007

Condition: excellent (used), Year of construction: 2003, Engel ES,1350/250 HL Clamping force: 250 tons Year of manufacture: 2003 Screw diameter: 55 mm Injection volume: 618 cm³ Codoxvmndopfx Adderk Enlarged mounting platen 1050x900 mm Crane traverse x3 Air valve x3 Plus: Engel robot E - PIC Z Year of manufacture: 2017

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: absolutely as new, machine is unused Equipment and technical specifications: - 2-belt machine; 1st belt: roller, 2nd belt: platen - Usable working width: 1100 mm - Sanding belt dimensions: 1120 x 2150 mm - Max. workpiece thickness: 160 mm - Steel calibration roller: 150 mm - Platen width: 50 mm - Belt motor power: 11 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW - Adjustable feed conveyor with steplessly variable speed: 4/20 m/min - Height adjustment motor: 0.24 kW - Mechanical belt oscillation "Eco Gear Patent System" - 1 drum brake for belt deceleration - Swiveling roller for belt tensioning - 3 pressure rollers, rubber-coated - Emergency stop bar at infeed - Electronic workpiece thickness display - 2 roller conveyors (each with 2 rollers) at infeed and outfeed - 1 extraction port, 160 mm Ø - Automatic table positioning - New patented belt oscillation system - No valves - No photoelectric sensors - Not sensitive to dust Crjdpfx Adjw E Ty Uedek - Energy-efficient, eco-friendly system - Since 2008 this machine model with the mentioned system has been running continuously without lateral belt runoff!!! - Includes Unitek belt motor 14.7 kW instead of 11 kW (upgrade) - Includes Unitek pneumatic platen with control synchronized to feed speed Availability: short notice Stock location: Saxony-Anhalt

Condition: like new (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, clamping force: 2,600 kN, screw diameter: 55 mm, total length: 6,700 mm, total width: 1,700 mm, total height: 2,300 mm, overall weight: 12,400 kg, Equipment: documentation/manual, We are offering for sale a lightly used NEO-EII Series Hybrid Injection Molding Machine - model NEO.E260Ⅱ-e1100, designed for efficient and precise plastic processing. The machine is fully equipped with high-end features and is CE compliant. Key Features & Specifications: • Voltage: 380V / 50Hz • Servo drive system • Electric plasticizing, clamping, and injection • Hydraulic mold adjustment, ejector, and carriage • KEBA 15” color touch screen control panel • Multilingual interface: Chinese, English, Czech, German • CE certification • Bimetallic screw and barrel (B-type), 55mm diameter • Automatic central lubrication system • 2 air blasters included • Dual hydraulic core pull system (2x MP) • Electrical connections: o 2x 400V/32A – CEE 5-pin o 1x 400V/16A – CEE 5-pin o 2x 230V/10A – Schuko • Energy consumption display on controller • Ceramic heater bands • I/O monitoring display • Memory for 200 mold parameter sets • SSR heating system • Spare parts box including screw tips • Glass water distributor (8 in / 8 out) • Movable hopper Crsdpoxv Ab Tofx Addok • Top color feeder system with potential-free plug & signal • Main power switch 4P 160A • EUROMAP 13 core pull interface (HAN 16A) • EUROMAP 2 platen with screw holes • Water cooling valve • Feeding throat temperature closed-loop control • EUROMAP 67 robot interface • 20-zone hot runner controller *A detailed specification of machine dimensions and parameters is available in the attached technical catalog on page 9. Condition: Lightly Used (Excellent condition, nearly as new) Availability: In Stock – Immediate Delivery Location: České Budějovice Delivery Condition: FCA České Budějovice, CZ Price: 106 500€ without VAT Delivery & commissioning available upon request.

Condition: new, Year of construction: 2023, Fanuc ROBOSHOT α-S30iB (2023) Model: FANUC ROBOSHOT α-S30iB Clamping Force: 300 kN Max. / Min. Mold Height: 330 mm / 150 mm Tie Bar Distance (HxV): 310 x 290 mm Platen Diameter: Ø 100 mm Injection Speed: 600 mm/s Cedpfoxqaidex Addsrk Screw Diameter: 22 mm Screw Volume: 11 ccm Resin Compatibility: Glass fiber content up to 30% Machine Type: Fully Electric Injection Molding Machine

Year of construction: 2006, condition: ready for operation (used), A screw press is available. Working capacity: approx. 64kNm, max. stroke: 250mm, nominal pressing force: 650t, max. pressing force: 750t, impact stroke: approx. 900t. Spindle diameter: 290mm, number of spindle starts: 3, max. stroke adjustment: 150mm, stroke rate: approx. 30min⁻¹. Frame opening: 730mm, max. installation height: 720mm. Ram area X/Y: 700mm/700mm, table area X/Y: 720mm/740mm. Machine dimensions X/Y/Z: approx. 4400mm/3150mm/2000mm, machine weight: approx. 30000kg. Upper and lower platen available. An inspection on site is possible. Cedoxxl Nfepfx Addork

Condition: ready for operation (used), Year of construction: 1998, operating hours: 64,000 h, machine/vehicle number: 173960, Description Quantity CS - model size II 1 0001/000 320 C 500 - 100 1 0006/022 Thermoplastics cylinder complete, 30 mm, highly wear-resistant 1 0060/030 SELOGICA user interface 1 0131/002 Technology stage 2 manually adjustable, with 2 pumps 1 0132/012 Open nozzle, 30 mm 1 0220/030 Nozzle tip for open nozzle 1 0300/000 Heater band for open nozzle 1 0320/000 Clamping platen set 320 central, 125 mm central diameter 1 0356/011 Connection for air blow unit 1 1 0361/011 Sorter unit, longitudinal installation, incl. connection 1 0375/000 Pneumatic control core pull 1, incl. pneumatic pressure relief valve 1 0382/004 euromap robot interface, 32-pin, with plug 1 0425/000 Electrical & mechanical preparation for external robot 1 0425/002 Socket combination, 1 CEE, 1 Schuko, additional 1 0444/001 Serial interface for printer V24 1 0454/001 6 electric heating control circuits for mould heating 1 0469/006 Crodpfxext Rimo Addok Low voltage cabinet 400 x 800 1 0500/001 High voltage cabinet 800 x 800 1 0500/004 Machine-related cooling circuit, manually adjustable 1 0525/001 Software package "Additional monitoring functions" 1 0555/001 Software package "Additional machine movements" 1 0555/002 Software package "Production control" 1 0555/003 Equipment package: optimization / user assistance 1 0555/005 Software package "Quality assurance" 1 0555/006 Software package "Documentation" 1 0555/007 Increased power for heating units 1 990

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. Codpfefxygwsx Addork After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: excellent (used), Year of construction: 2001, Krauss Maffei KM 800-5000 MC Injection Moulding Machine Year of manufacture: 2001 Equipment: robot Technical details Clamping force: 8,000 kN Crjdpfjxvb Dyex Addok Maximum mould opening force: 356 kN Moving platen force (opening): 98 kN Moving platen force (closing): 92 kN Platen dimensions (H x W): 1,610 x 1,530 mm Tie bar spacing (H x W): 1,120 x 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum opening: 2,000 mm Hydraulic ejector stroke: 250 mm Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g Machine details Dimensions (L x W x H): 10,500 x 2,860 x 2,890 mm Weight: 43,000 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 32,827 h, functionality: fully functional, machine/vehicle number: 230239, clamping force: 2,000 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 2 bar, injection weight: 184 g, overall weight: 11,200 kg, Here we offer the following well-maintained used injection moulding machine as part of our injection moulding machinery trading operations. Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Special notice – Tax advantage for used machines As of 01.07.2025, used machines are also eligible for a special depreciation of 30% per year. In addition to the favourable price compared to new machinery, you can claim the same depreciation rates as for a new machine. Keyword: Growth Booster (§ 7 paragraph 2 EStG-E) Arburg 1500T 2000-400 Rotary Table Vertical Machine Machine no.: 230239 Full equipment details are listed in the downloadable documentation – machine card. Control system: Selogica Year of manufacture: 2014 Codpfeuuf Iaox Addork Total machine cycles: only 1,469,728 Automatic operating hours: 32,827 h Clamping Unit Platen distance: 700 mm Clamping force: 200 t / 2000 kN Mould installation height: 400 mm Table diameter: 1500 mm Rotary angle: 180° Rotation time: min. 2.4 s Permissible load on rotary table: 1,050 kg Ejector force: 45 kN / 175 mm stroke Injection Unit Screw diameter: 40 mm Stroke volume: 201 cc Injection weight: 184 g Injection pressure: 2,000 bar Special Features - 2-station, 180° alternating rotary table with servo-electric drive and hydraulic locking pin for precision centering of the rotary plate in end position; separated safety guard between clamping and loading area, adjustable in height on the rotary plate to suit mould base plates, with provision for media lines and connections for mould bases - Rotary table diameter: 1,500 mm - Max. clamping force: 2,000 kN - Injection unit to EUROMAP 400 - Screw diameter: 40 mm - Special ergonomic rotary table design with the following features: o Corrosion protection for the rotary table (VE 574/90) o Water connections: 2 circuits o 3 hydraulic connections for needle valve system o 3 core pulls o Per station: 1 core pull and 2 tempering circuits o 6 mould temperature control circuits o 12-zone mould heating circuits o Kistler cavity pressure sensors (2x) o Temperature query for start-up components Weight: 11,200 kg Power: 22 kW motor – heating capacity: 9.4 kW (5 zones) – rated connection: 100 A The machine is offered after comprehensive functional testing, fully operational with commissioning warranty, and tested prior to dismantling. Further information about our offered machines and our company: - We only sell machines that we have acquired from active production, from our own warehouse in Hannover - All machines are checked and tested before removal - We do NOT sell insolvency assets – we are NOT brokers trading in third-party property - All machines offered come from successful businesses, where regular maintenance and care are standard - All machines offered can be inspected at our warehouse

Condition: excellent (used), Year of construction: 2004, Arburg 270 S 250-60 (2004) Cjdpfx Ajxl Tp Tjddsrk Clamping Force: 25 t Tie Bar Spacing: 270 mm × 270 mm Platen Dimensions: 400 mm × 400 mm Max. Mold Opening Stroke: 275 mm Min. Mold Height: 198 mm Max. Daylight: 279 mm Ejector Stroke: 95 mm Mold Opening Force (Max.): 14 kN Machine Dimensions (W × D): 1250 mm × 3800 mm Machine Weight: Approximately 1900 kg Screw Diameter: 22 mm Stroke Volume: 39 cm³ Injection Pressure: 1810 bar Injection Flow (2 Pumps): Up to 8.1 cm³/s Material Throughput (PS): Up to 22.0 kg/h Year of Manufacture: 2004 Type: Hydraulic Injection Molding Machine

Condition: ready for operation (used), A total of three Ferromatik injection molding machines are available. 1) Ferromatik K155, clamping force: 1550kN, max. platen distance: approx. 950mm, min. mold height: 300mm, max. opening stroke: 650mm, tie bar distance: 500mm/500mm, platen dimensions X/Y: 750mm/750mm, weight: approx. 8000kg. The machine has a leakage in the area of the hydraulic cylinders for the aggregate movement. 2) Ferromatik K200, clamping force: 2000kN, platen dimensions X/Y: 830mm/830mm, tie bar distance: 560mm/560mm, opening stroke: 650mm, daylight: 1000mm, min. mold height: 350mm. Machine dimensions X/Y/Z: approx. 7300mm/1800mm/2300mm, weight: approx. 10000kg. 3) Ferromatik K275, clamping force: 2750kN, min. mold height: 350mm, tie bar distance: 630mm/630mm. Machine dimensions X/Y: 8000mm/2300mm, weight: 13600kg. The machines are sold without handling. Documentation vorhanden. An on-site inspection is possible. Credpfx Adoxxa S Isdek

Condition: excellent (used), Year of construction: 2001, Engel ES 500/110 HL Clamping force: 110 tonnes Year of manufacture: 2001 Screw diameter: 45 mm Injection volume: 318 cm³ Enlarged clamping platen Platen dimensions: 730x600 mm Crjdpfjxu Rldsx Addok

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, Here, as a specialist dealer in injection moulding machines, we offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines currently in use. Year of manufacture: 2010. We have been wholesalers of used injection moulding machines for over 25 years. Current tax notice – Advantage for buying used machines: From 01/07/2025, used machines will also qualify for special tax depreciation of 30% per annum. In addition to the lower price compared to new machines, you can claim the same depreciation amounts as for a new machine. Keyword: growth booster (§ 7 paragraph 2 EStG-E). Currently in stock at our Hannover warehouse and tested. Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP thermoplastics Extras: 2 additional robots: Linear robots LRX 100 and LRX 50 can also be purchased separately - 2 x core pull (movable and fixed WAP) - Pneumatic valve 1 on fixed WAP - Accumulator for increased injection performance - Rapid SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Mould approach control Crsdpfxoxqhuuj Addok - Cycle time analysis - External USB keyboard - Graphic analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on moving WAP for blowing out - 12 temperature control zones - Potential-free BDE contact - Process monitoring - Cycle storage - Trend graphic – target/actual diagram - PV control - Active back pressure control - Single-owner machine – sourced in Germany Regular maintenance by manufacturer and previous owner Clamping Unit Clamping force: 2500 kN / 250 t Tie bar distance: 630 x 630 mm Platen size: 995 x 1050 mm Max. opening stroke: 820 mm Min. mould height: 330 mm Max. opening: 1150 mm Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection Unit Screw diameter: 50 mm Injection volume: 432 ccm Shot weight: 393 g / PS Injection pressure: 2304 bar Robot LRX S50 - 3 gripper circuits – 4 vacuum circuits Robot LRX 100 - 1 gripper circuit – 4 vacuum circuits Electrical Equipment Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation and software manual Available immediately ex our Hannover warehouse or delivered to your location (delivery at cost). The machine is functionally tested and in our sole ownership. The requested machine is immediately available from our Hannover warehouse, functionally tested, and can be inspected under power. About our machines and company: – We only sell machines owned by us, purchased from ongoing production, from our Hannover warehouse – All machines are inspected and tested before disassembly – We do NOT sell insolvency stock – we are NOT brokers dealing with third-party property – All machines come from successful companies where maintenance and care are taken as a matter of course – All listed machines are available for viewing in our warehouse

Condition: excellent (used), Year of construction: 2010, Clamping force: 110 t Tie bar distance: 470x420 mm Min Mould height: 275 mm Max Mould height: 775 mm Platen size : 680x663mm Screw diameter: 22 mm Shot volume: 41 cm3 Opening force: 55 kN Opening path: 500 mm Correct injection pressure: 2864 bar Nozzle pressure: 47 kN Path of the pant : 250 mm Forward ejector force: 41,2 kN Reverse: 26,4 kN Max. mold weight : 1000 kg min. tool diameter: 315 mm Cedpfju Ekaqjx Addork Working hours: 70.000 h Type: Horizontal Drive: Hydraulic Unilog B6 controll Air Valve Core puller Euromap 67

Condition: excellent (used), Year of construction: 1999, Engel ES 1050/175 HL-V, clamping force 175 tons, year 1999, screw diameter 55 mm, injection volume 510 cm³, shot weight 459 g, enlarged clamping platen 820x750, CC100 control system. Cedpfx Aexu Rkyoddjrk

Condition: excellent (used), Year of construction: 1995, Engel ES 650/100HL Cjdoxu Ri Aopfx Addjrk Clamping force 100 t Year of manufacture 1995 Screw diameter 45 mm EC 88 Platen dimensions HxW 740 x 520 mm