Used Pm Trac for sale (5,396)

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, AXA ELECTRO-HYDRAULIC PRESS WITH MOVING CYLINDER. Capacity: 150 tons. Dual automatic speed with rapid traverse. Special electrical panel with fast/slow switch for one-hand operation. Moving cylinder with 816 mm traverse stroke. Internal daylight from shoulder to shoulder: 1500 mm. Ram stroke: 300 mm. No. 01 AXA PM150/15 ELECTRO-HYDRAULIC PRESS WITH MOVING PISTON – NEW CONDITION “CE” MARKED. -DUAL AUTOMATIC SPEED WITH RAPID TRAVERSE. -COMPLETE WITH A SPECIAL ELECTRICAL PANEL FOR FAST/SLOW SWITCH FOR ONE-HAND OPERATION. -TECHNICAL DATA SHEET ATTACHED. -Applied force: 150 tons -Cylinder stroke: 300 mm -Internal daylight: 1504 mm -Approach speed (rapid traverse): 1450 mm/minute -Working speed (slow): 105 mm/minute -Cylinder ram stroke: 300 mm -Cylinder ram diameter: 110 mm Godpfxslruhde Akmeiw -Stem diameter: M30 -Tank capacity: 50 liters -Max. pressure: 350 bar -Voltage: 400 V, Frequency: 50-60 Hz -Power: 3 kW motor -Max. current consumption: 7.3 A -Weight: 1500 kg GALTECH distributors. • 2MP block. • No. 2 VIVOIL external gear unidirectional pumps. One for rapid approach and return (calibrated at 20 bar), and one with adjustable pressure controlled by a handwheel to set the required power. • Maximum pressure valve with mechanical lock to prevent overpressure. • Standard pressure gauge to display the applied force. • INTECH electrical panel certified according to current regulations and with independent CE marking.

Year of construction: 2025, condition: used, functionality: fully functional, laser power: 200 W, machine/vehicle number: ELXX-25100004, For sale is a professional, pulsed laser cleaning machine (pulse laser) of the type GL-PM-200 from the manufacturer EraserLaser GmbH. The unit dates back to the 2025 model year, has very few operating hours, and is in excellent, fully functional condition. In contrast to continuous CW lasers, this pulsed system is ideally suited for extremely precise and material-friendly cleaning. It is the ideal solution for demanding tasks where the base material (e.g., sensitive molds, historical components, weld seam preparation, or precision tools) must not be subjected to any thermal influence or material removal. Rust, paint, oils, and oxide layers are removed precisely and without leaving any residue. Product benefits & highlights: Maximum precision without heat input: Thanks to the fine adjustment of pulse width (20–500 ns) and frequency, the cleaning can be precisely tailored to sensitive surfaces. Compact & flexible: The laser is housed in a robust enclosure and can be ideally used in mobile applications. Extensive parameter control: Parameters such as laser power, scan speed, frequency, and track density (Spiral Series) can be precisely controlled via the intuitive 7-inch touch display. Quick access to memory locations: Up to 5 user-defined work modes can be saved to allow quick switching between different cleaning requirements in everyday work. Easy maintenance & care: Low maintenance thanks to reliable air cooling. Integrated preview laser for precise alignment of the cleaning area on the workpiece. Technical data at a glance: Giodpeziww Aefx Akmjw Model: GL-P-M-200 Laser type: Pulsed fiber laser (pulse laser), Laser Class 4 Wavelength: 1064 nm Laser power: 200 watts (continuously adjustable from 10% to 100%) Laser frequency: 5 kHz – 4000 kHz Pulse width: 20 ns – 500 ns Cleaning area (length x width): Variable, adjustable up to 100 mm x 20 mm Fiber length (hose assembly): 4 to 10 meters Cooling: Air-cooled Power connection: 220V AC (Schuko plug, fuse rating min. 16A) Condition & scope of delivery: Condition: Very well-maintained, used condition, hardly used, visually and technically flawless. The protective lens and optics are clean and fully functional. Scope of delivery: Laser cleaning system GL-P-M-200 including hose assembly and cleaning gun. Important safety note: Operating a system of Laser Class 4 requires the mandatory use of approved laser safety goggles (DIN EN 207 for the wavelength range of 1064 nm) as well as compliance with applicable occupational safety regulations (including respiratory protection/extraction).

Condition: used, functionality: fully functional, mileage: 30,389 km, power: 129 kW (175.39 HP), first registration: 12/1992, fuel type: diesel, empty load weight: 8,010 kg, overall weight: 12,500 kg, axle configuration: 4x4, fuel: diesel, color: red, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 1992, operating hours: 2,466 h, operation weight: 8,010 kg, Equipment: all wheel drive, crane, differential lock, trailer coupling, Fire engine: + Brimont Gjdpfswu Eh Ajx Akmsiw + Model PM - ETR R42A9 + First registration: 08/12/1992 + 30,389 km; 2,466 operating hours + 175 HP diesel engine + 5-speed manual gearbox with reduction gear + Switchable all-wheel drive + Lockable differentials + Twisting (lockable) chassis frame + Selectable front-, rear-, and all-wheel steering, crab steering + Hydraulic winch 4,500 kg + Tow hitch (3,500 kg) + Cabin protection grille + Mechanical rear crane + Spare wheel + Water tank 3,000 l + Portable fire pump (not tested) + Unladen weight: 8,010 kg; gross vehicle weight: 12,500 kg + Fire service vehicle from first owner Receive all newly listed vehicles via email – Subscribe to our NEWSLETTER! Subject to errors and misprints. Sale subject to prior sale!

Condition: good (used), Here, we offer a Pfeiffer vacuum turbo pump. Godpfxezdqp Ue Akmoiw Pfeiffer vacuum turbo pump 1 Pfeiffer TMH 1000M P turbo-molecular pump 910 l/s, weight: 50 kg Type: TMH 1000M P Scope of delivery: (See image) 2 weeks start-up warranty The unit comes from a warehouse liquidation. We also offer express shipping (DHL, UPS, TNT). We would be happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: used, mileage: 8,72,500 km, power: 294 kW (399.73 HP), first registration: 06/2008, fuel type: diesel, empty load weight: 21,700 kg, maximum load weight: 10,300 kg, overall weight: 32,000 kg, axle configuration: 8x4, wheelbase: 5,000 mm, brakes: retarder, color: grey, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, suspension: steel, loading space length: 6,800 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, trailer coupling, MAN TGA 35.400 8x4 BB, 8x4 platform truck with heavy-duty crane Registration date: 6/2008 872,500 km Euro 4 emission class (without AdBlue) Long cab with bed Manual transmission Retarder Air conditioning, auxiliary heater Weight variant 35,000 kg 8x4 drive Leaf spring suspension front and rear Tires 315/80 R22.5, tread approximately 50% Platform: 6800 mm Loading height: 1200 mm Wheelbase: 5000 mm Unladen weight: 21,700 kg Crane: PM 48028 Giedpfx Aezifdkskmow Radio remote control Winch 6-point support 8x hydraulically extendable Max. capacity: / 19,300 kg 3.0 m / 12,600 kg 3.9 m / 10,500 kg 4.4 m / 8,150 kg 6.8 m / 5,600 kg 8.8 m / 4,120 kg 10.8 m / 3,120 kg 12.3 m / 2,460 kg 15.0 m / 1,920 kg 17.2 m / 1,560 kg 20.0 m / 1,310 kg 22.0 m / 1,140 kg Hook height approx. 26 meters Export/net price: 65,900 euros All information without guarantee, errors and omissions excepted.

Condition: used, mileage: 8,72,500 km, power: 294 kW (399.73 HP), first registration: 06/2008, fuel type: diesel, empty load weight: 21,700 kg, maximum load weight: 10,300 kg, overall weight: 32,000 kg, axle configuration: 8x4, wheelbase: 5,000 mm, brakes: retarder, color: grey, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, suspension: steel, loading space length: 6,800 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, trailer coupling, MAN TGA 35.400 8x4 BB 8x4 flatbed truck with heavy-duty crane First registered: 6/2008 872,500 km Euro 4 emission class (without AdBlue) Long cab with bed Manual transmission Retarder Air conditioning, auxiliary heater Weight variant 35,000 kg 8x4 drive Leaf spring suspension front and rear Tires 315/80 R22.5, approximately 50% tread Flatbed: 6800 mm Loading height: 1200 mm Wheelbase: 5000 mm Unladen weight: 21,700 kg Crane: PM 48028 Radio remote control Winch 6-point outrigger system 8x hydraulically extendable Max. capacity: 19,300 kg 3.0 m: 12,600 kg 3.9 m: 10,500 kg 4.4 m: 8,150 kg 6.8 m: 5,600 kg 8.8 m: 4,120 kg 10.8 m: 3,120 kg 12.3 m: 2,460 kg 15.0 m: 1,920 kg 17.2 m: 1,560 kg 20.0 m: 1,310 kg Gsdpfozifddjx Akmsiw 22.0 m: 1,140 kg Hook height approx. 26 meters Export/net price: 65,900 euros All information without guarantee, subject to errors.

Condition: used, mileage: 1,83,000 km, power: 302 kW (410.61 HP), first registration: 05/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, loading space length: 5,000 mm, loading space width: 2,300 mm, loading space height: 900 mm, Year of construction: 2019, Equipment: ABS, air conditioning, Volvo FMX 410 / 6x4 Tipper 5,00 m + CRANE + REMOTE CONTRROL Giodpezd I Dvjfx Akmjw Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2019 ? MILAGE: 183 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH ?AIRCONDITION TIPPER: 500 x 230 x 90 cm (L x W x H) CAPACITY: 12 000 kg TOTAL WEIGHT: 26 000kg TIRE SIZE: FRONT : 385/65R22,5 BACK : 13R22,5 WHEELBASE: 430/133 cm SUSPENSION: FRONT : SPRING BACK : AIR CRANE: PM 18.5 TP + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 7636

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 07/2027, total width: 690 mm, total length: 930 mm, total height: 1,760 mm, empty load weight: 320 kg, input frequency: 50 Hz, year of last overhaul: 2026, overall weight: 320 kg, electrical fuse: 16 A, TOP Planetary Mixer Rego PM 60 E Power adjustment – stepless LED control panel with timer 1 stainless steel bowl, 60 liters 1 beater, 1 flat stirrer Stationary machine with LED bowl illumination DGUV V3 certified Gjdpozb Udfjfx Akmeiw Connection: 400V, 16A CEE plug Dimensions: 930 x 690 x 1760 mm (W x D x H) Used machine with warranty Visit our large showroom!

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 15040169 + 0805014349, Pfeiffer Vacuum GmbH Turbomolecular pump with drive electronics, PM P03 020 GA, TPH 2101 P + PM C01 713, TC 750 Turbo pump model: PMP03020GA, TPH2101P Drive electronics model: PMC01713, TC750 Turbomolecular pump: Serial number: 15040169 Inlet connection nominal diameter: DN 250 ISO-K Gisdpfx Asvrzakjkmsw Outlet connection nominal diameter: DN 40 ISO-KF Flood connection: G1/8" Nominal speed: 31,500/min (525Hz) Suction speed N2: 1,900l/s Max. backing pressure N2: 1.5mbar Max. backing pressure He: 1.0mbar Max. backing pressure H2: 0.5mbar Oil: PM 016 144-T Drive electronics: Serial number: 0805014349 Input: 24/48/72/140V DC +/-5%, 5.4A Output: 0-140V AC, 0-1600Hz, 6.5A Note on condition: 1. Statements on operating hours are approx. 13,000h with approx. 1,600 starts and stops. 2. Process gases: nitrogen and argon 3. Process dusts: chromium nitride and steel 100Cr6 4. The pump was stored in full working order in 2018 and cleaned externally.

Condition: excellent (used), functionality: fully functional, Pfeiffer Vacuum GmbH Turbomolecular Vacuum Pump, PM P02 420 C, TMH 520 Model: PMP02420C Type: TMH520 Condition: Used Gjdpfx Akjxpu Sqjmoiw

Condition: ready for operation (used), Year of construction: 2001, PM 74-2 2001 Year Straight 22 mil impressions Easy plate Alcolor Dampening with Technotrans Grafix Alfatronic 200 powder Gisdpfx Ajzb Nxkjkmjw Gear free of damages Tools and Books Brand new rollers

Condition: ready for operation (used), Lenze PM 13.171.52.3.2.9 servo motor with gearbox, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gsdpfxoi D I Hks Akmsiw

Condition: ready for operation (used), CMC 3528000M5000TAC-CR PM servo motor, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gisdpfx Akei D Hnxsmsw

Condition: ready for operation (used), CMC 3515000M5000TAC-F0 PM servo motor, encoder cover has a crack (see photo), serial number as shown in the photo, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Giedpfxoi D Hnqo Akmsw

Condition: ready for operation (used), Siemens 7ND2022-5GB46-1AA6-Z Compensograph PM, serial number as per photo, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gijdsxahi Djpfx Akmsw

Condition: excellent (used), machine/vehicle number: 2802048, Bind Machine Plastic Comb Binder Model 16-DB s.- No: 2831384 Giedpeh Elcyefx Akmjw

Condition: used, power: 78 kW (106.05 HP), first registration: 12/2025, fuel type: gasoline, axle configuration: 4x2, color: white, gearing type: mechanical, suspension: steel, Leaf spring suspension, UNIQUE UNIT - ZERO-MILE VEHICLE - REGISTERED 12/17/2025 - SHORT RANGE LPG (15L) - DUAL REAR WHEEL - WHEELBASE 3250mm - OPTIMIZED PAYLOAD 550 Kg - WHITE COLOR - REAR TIPPER BODY: 2300x1800mm - PM 2821 CRANE - TOP EQUIPMENT: DAB radio, Manual air conditioning, Electrically heated, folding, and adjustable exterior mirrors, Passenger airbag, Body-colored front bumper, Fog lights - VEHICLE AVAILABLE SUBJECT TO PRIOR SALE - TIPPER BODY FEATURES: - Chiarvesio-built rear tipper body, 2300x1800 mm (external dimensions) - L-shaped sideboards, 400 mm high, with 180-degree lateral opening, and rear opening from below/above - 30/10 sheet metal floor - 01 front pole holder - 01 galvanized 400mm tool box - Fenders - 1+1 winches - rear light grilles CRANE FEATURES: - model PM 2821 - 02 manually extendable stabilizers - 01 hydraulic extension - 02 additional actuators - bilateral 6-element controls - 01 swivel hook - 200 rotation buffers (the crane does not operate above the cab) Giodpfx Aozf Sbujkmow

Condition: used, mileage: 4,31,000 km, power: 265 kW (360.30 HP), first registration: 10/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, loading space length: 6,600 mm, loading space width: 2,450 mm, loading space height: 600 mm, Year of construction: 2009, Equipment: ABS, air conditioning, crane, parking heater, MAN TGS 26.360 / 6x4 Gedpforkyrmex Akmeiw PLATFORM 6,60 m + CRANE + REMOTE CONTROL Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2009 ? MILAGE: 431 000 km EQUIPMENT: ? ABS ? ASR ? POWER STEERING ? EL WINDOWS ? EL MIRRORS ? ENGINE BRAKE ? TACHOGRAPH PLATFORM: 660 x 245 x 60 cm (L x W x H) CAPACITY: 10 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 515/135 cm TIRE SIZE: 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR CRANE: PM 30 SP + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: used, mileage: 7,36,000 km, power: 309 kW (420.12 HP), first registration: 12/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: mechanical, loading space length: 6,900 mm, loading space width: 2,470 mm, loading space height: 700 mm, Year of construction: 2009, Equipment: ABS, crane, Scania G 420 / 6x4 Platform 6,90 m + CRANE + REMOTE CONTROL Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2009 ? MILAGE: 736 000 km EQUIPMENT: Gisdpfx Akjyvm Tcomew ? ABS ? EL. WINDOWS ? AIRCONDITION ? POWER STEERING ? TACHOGRAPH LOADING SPACE: 690 x 247 x 70 cm CAPACITY: 12 500 kg TOTAL WEIGHT: 26 000kg TIRE SIZE: 315/80R22,5 WHEELBASE: 490/135 cm SUSPENSION: SPRING CRANE: PM 27S LC + REMOTE CONTROL VIN: VLUG6X40009143993 TEL: poka? kontakty KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO poka? kontakty SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? poka? kontakty LASZLO - MAGYAR poka? kontakty COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) poka? kontakty - RADEK - ?????

Condition: new, Code: N0235 Brand: CASADEI INDUSTRIA Model: E 350 PM Automatic edge bander with hot melt (EVA) glue pot, chain panel feeding and pre-milling Maximum finishing quality Chain feeding system Pre-milling (E350PM) 3 free spaces for finishing units High performance 7 m/min feed speed 45 mm panel height 2 mm edge coils Minimum space occupied 2,30 m length Easy to use Unit settings with a piece of edge Easy and intuitive use of machine 3 position infeed fence 0-1-2 mm (according to edge thickness) Chain panel feeding Firm grip of panel guaranteed by special non-slip rubber on the pads. Linear feeding ensured by double sliding tracks with a special geometric profile accurately machined with precision to a hundredth of a millimetre. Long lasting monolithic frame fully processed only in one cycle on a CNC machining centre. Pressure bar with locking levers Top pressure bar with a double row of rubber wheels mounted on bearings, with locking levers and position indicator Pre-milling INVISIBLE GLUEING LINE DIAMOND tools Ø= 60mm H= 54mm HF motors 200 Hz – 12.000 rpm – 0.75 kW (each) Dedicated suction system and blower for panel cleaning before glueing Glueing unit PERFECT GLUEING, QUICK AND PRACTICAL SET-UPS 6 heating elements to guarantee uniform glue temperature. Motorized glue spreading roller with an internal electrical heating element. Gisdoyvt Exspfx Akmjw Inferior Teflon-coated glue pot to permit complete and rapid cleaning. Pneumatic shear, pressure rollers, edge feeding system DETAILS THAT MAKE THE DIFFERENCE Edge feeding synchronized with panel being processed Oscillatory movement of the cutting shear unit to guarantee perfect glueing Quick and precise positioning of the pressure rollers. The system “reads” the edge thickness, making mistakes impossible! Trimming cut-off PERFORMANCE AND VERSATILITY End trims front and rear excess edge Working cycle controlled by PLC Exclusion from control panel (PLC) Flush trimming unit Flush trimming unit with vertical disc copiers as standard Possibility of processing for edges from 0.4-2 mm Anti-adherence / release agent spraying unit (Opt.) INSTANT PERFECT CLEANING Spray function controlled by PLC 2 sprayers (lower and upper) and liquid tank Infrared lamp (Opt.) TO GUARANTEE THE BEST GLUEING CONDITION Creates the best conditions for perfect glueing Heats panels and removes all traces of dampness.

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, total length: 2,100 mm, total width: 730 mm, heating capacity: 7.5 kW (10.20 HP), screw conveyor diameter: 35 mm, machine/vehicle number: DE27307, TECHNICAL DETAILS Capacity: 30 – 80 kg/h Screw diameter: 2 x 35.0 mm L/D ratio: 20:1 Screw speed: 80 rpm Gearbox ratio: 12:1 Number of heating zones: 5 Heating power: 7,500 W Giodezargnspfx Akmjw Number of cooling fans: 5 Extruder discharge height: 1,150 mm MACHINE DETAILS Control system: Analog, contactor-controlled system Drive / Motor: 20 kW (DC) Cooling fan connection: 230 V Gearbox type: Lenze Material: PE, PP, PS, ABS Design: Co-rotating, degassing, vacuum pump Dimensions (L x W): 2,100 x 730 mm Note: Water bath and granulator can be purchased for an additional charge.

Condition: good (used), functionality: fully functional, input voltage: 400 V, working width: 600 mm, total width: 1,750 mm, total length: 1,190 mm, total height: 2,000 mm, DGUV certified until: 06/2027, type of input current: three-phase, overall weight: 350 kg, conveyor belt width: 600 mm, year of last overhaul: 2022, WP Pallet Depanner ST.A + PM Pallet Depanner Werner & Pfleiderer, Model: ST.A+PM with depanning trays 5 x 7 for Kaiser rolls Depanner is mobile Connection 400V, 16A-CEE plug Used machine Option: Maintenance contract Delivery service Training & commissioning We have many other bakery machines in stock! Giodpfxeytl I Se Akmsw

Condition: used, mileage: 1,26,453 km, power: 338 kW (459.55 HP), first registration: 01/2011, tire size: 385/65R22,5, axle configuration: 8x4, wheelbase: 1,400 mm, color: green, gearing type: automatic, emission class: euro5, suspension: steel, loading space length: 7,000 mm, loading space width: 2,430 mm, loading space height: 1,000 mm, Year of construction: 2010, Equipment: air conditioning, crane, electric window regulation, trailer coupling, Technical information Number of cylinders: 6 Engine capacity: 12.777 cc Drivetrain Drive: Wheel Make of engine: Volvo Axle configuration Suspension: leaf suspension Axle 1: Tyre size: 385/65R22,5 Godpouc Eqijfx Akmoiw Axle 2: Tyre size: 385/65R22,5; Steering Axle 3: Tyre size: 315/80R22,5; Double wheels Axle 4: Tyre size: 315/80R22.5; Double wheels Weights Empty weight: 15.610 kg Carrying capacity: 16.390 kg GVW: 32.000 kg Functional Mast: telescopic (5 parts) Make of bodywork: PM PM 22024 SP = Additional options and accessories = - PTO

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 9,000 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 420 mm, number of axes: 5, controller manufacturer: SIEMENS, controller model: Siemens 840D sl / PCU 50 with NCU 730, spindle motor power: 26,000 W, spindle speed (max.): 24,000 rpm, This 5-axis MAKA PM 270 X CNC processing center was manufactured in 2012. It features an impressive X-axis travel of 9000 mm and Y-axis travel of 2700 mm, designed for workpiece thicknesses up to 60 mm. The machine includes a powerful milling spindle with adjustable speeds up to 24,000 rpm and a tool magazine with 32 positions for efficient tool changes. If you are looking to get high-quality milling and drilling capabilities, consider the MAKA PM 270 X machine we have for sale. Contact us for further details. • CNC control: Siemens 840D sl / PCU 50 with NCU 730; OP 15 control panel with 15" display on a guide rail along the longitudinal axis • Working area / machinable cube (with tool L/D 160 mm): • X: 9000 mm (with both gantries) • Y: 2700 mm • Z: standard cube size 420 mm • Custom-designed for workpiece thicknesses up to 60 mm • 5-axis unit • Portal 1: • Universal 5-axis milling unit • Spindle power: 20/26 kW (S1/S6) • Speed: up to 24,000 rpm, water-cooled • Tool interface: HSK F63, automatic tool change • Thread cutting possible • Chain tool magazine: 32 positions with rotary gripper; fixed on operator side • Portal 2: • 2 unit mounting consoles, each with 2 heavy-duty multi-spindle drilling units • Shared exhaust hood • 13 drilling spindles per unit (26 total), individually selectable vertically, L-shaped arrangement • 2 inclined drilling spindles adjustable 0–25° forward (1 right, 1 left), approx. 2.2 kW each, 2800 rpm • Drill chuck: Rego Fix ER 25 M • Machine table: • Base frame with linear guide • 12 table crossbeams on linear guides for X-positioning, each NC-driven and positionable • Vacuum supply integrated into the crossbeams • Each crossbeam individually vacuum-monitored and linked to machine control • Installation requirement: Foundation recess approx. 300 mm Giodoy Uwrgopfx Akmsw • Workplace safety: • Traveling safety cabin on both gantries • Safety bumpers and safety light curtain system on operator side and rear Additional equipment • Workpiece feed system: 1 belt conveyor with 4 belt strands (40 mm width each); each crossbeam with NC-controlled lifting device; stroke 110 mm mm) • Vacuum system: Bush vacuum pump type Mink MM 1322, suction capacity 250 m³/h, with 500-liter intermediate tank for rapid vacuum build-up • Chip handling: 2 chip conveyor belts under the machining area (for chips/small waste up to 100 x 100 x 100 mm) • Automatic central lubrication system

Condition: excellent (used), functionality: fully functional, For sale: Gel matic 250 air-cooled soft ice cream machine with 3 levers, in almost new condition. Includes a complete new spare gasket set, reconditioned pumps and new pump seals. Output: 29 kg/h, capacity: 2x10 l tanks, touchscreen, tabletop model. 380V. Godev Tfa Ropfx Akmsiw