Used Polisher for sale (1,912)

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 4,000 mm, total length: 6,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 6,400 kg, The PORĘBA TPK-90A1/4M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: on stock available, under power, inspection possible anytime Technical data: - distance between centers/turning length: 4000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg Bcodpfx Aoykzvyeg New - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 6500 mm width: 1800 mm height: 1865 mm total weight: 6400 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover, (no steady rests) Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - MULTIFIX quick change tool post

Condition: used, Year of construction: 2000, Technical details: workpiece diameter: 26 mm swing diameter: - mm workpiece length: 66 mm total power requirement: 12 kW Bedpfxjw Nxkfe Ag Nscw weight of the machine ca.: 4 t dimensions of the machine ca.: 3,14 x 1,69 x 2,2 m The machine has so far processed the parts in a stream, i.e. without interruption. Piston rods are usually machined with a clearance, requiring the finishing stone to be placed only when the part passes under the stone. 1. Feed Roller 2. Stone holder, 10 pieces, 50 mm new guides can be made between approx. 15 to 40 mm The Roller of Nagel: Dia: approximately 120 mm L: app. 880 mm *

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, Bjdpfjyi Ezkjx Ag Nocw - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: excellent (used), Year of construction: 2007, Automatic fender polisher 5 brush groups Bcjdpfotp Nclox Ag New

Condition: used, maximum load weight: 32,447 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 11/2022, next inspection (TÜV): 04/2026, loading space length: 13,110 mm, loading space width: 2,400 mm, loading space height: 2,650 mm, loading space volume: 86 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 86 m³ First registration: 11/2022, one owner Mileage: 143,603 km Internal dimensions (LxWxH): 13,110 x 2,350/2,450 x 2,770 mm (conical design) Unladen weight: 9,640 kg Floor: continuous 5 mm Hardox steel HB450 Front wall and side walls: 3 mm Hardox steel HB450 Pneumatically foldable rear underrun protection Straight front wall, interior access steps Rear portal doors 50:50, pneumatic remote release Reinforced roof roll tarp HYVA tipping cylinder type Alpha, low pressure 2x pneumatic vibrators JOST crank landing legs, full load SAF axles with large 430 mm disc brakes 1st axle: LIFT AXLE Bodpjymipyefx Ag Nocw WABCO trailer EBS with RSS (Roll Stability Support) WABCO SmartBoard Lifting and lowering system Automatic tipping lowering function Tyres: 6x 385/55 R 22.5 ALCOA Dura-Bright polished aluminium wheels Aluminium access ladder Shovel and broom holder Toolbox left side 4x LED reversing lights RENTING is the new BUYING—immediately available from us on a full-service rental basis

Condition: ready for operation (used), Year of construction: 2018, This SCM DMC sd60 belt sander was manufactured in 2018. It features a working width of 1,100 mm and handles materials from 4 to 170 mm in height. Equipped with a main motor of 15 kW, it offers feed speeds of 4.5/9 m/min. Additional features include a rubber-coated calibration roller, sanding roller, hard sanding pad, and electronic controls for precise operation. Consider the opportunity to buy this SCM DMC sd60 belt sander. Contact us for more information. Machine Benefits Technical Machine Benefits • Working width: 1100 mm • Min. /max. Working height: 4 - 170 mm • Sanding belt dimensions: 1115 x 2150 mm • Feed speed: 4. 5 / 9 m/min • Main motor 15 kw (20 hp) Extra Information ontrol Unit Electronic ammeter for the main motor to display current consumption Electronic display of the working height Electronically controlled sanding belt Electronic working height adjustment Electronic Programming Unit LOGIC 50 K Electronic Programming Unit LOGIC SC with LCD display with two rows of dust-proof polishing keypads and integrated LED signals Workpiece Rubber pressure rollers Kickback protection at the inlet Rubber feed carpet Roller table with two rollers at the inlet and outlet of the work table Pneumatic on/off switching of the roller - 1st unit Pneumatic on/off switching of the roller - 2nd unit TES elastic link sanding pad Pneumatic on/off switching of the sanding pad unit Tools Bcsdpfsx Nr Sdox Ag New "R" unit with roller "CS" combination unit with roller/sanding pad Rubber-coated calibration roller Rubber-coated sanding roller Hard sanding pad "RA" diagonally ribbed steel contact roller in the first unit

Condition: ready for operation (used), Year of construction: 2023, controller manufacturer: KUKA, controller model: smartPAD, number of axes: 6, This 6-axis KUKA KR 10 R1440-2 robot arm manufactured in 2023 features a payload capacity of 10 Kg and a range of 1440 mm. It includes a KUKA KRC4 compact control cabinet, smartPAD teaching pendant, and various interfaces for enhanced functionality. Ideal for tasks requiring precision and flexibility. If you are looking to get high-quality robotic capabilities, consider the KUKA KR 10 R1440-2 machine we have for sale. Contact us for more information about this machine. Additional equipment • Transfer gripper and support contour with integrated vacuum feedthrough • Bellows suction cup, lifting plate • Parallel gripper, terminal box • QC 90 quick-change system, pneumatic coupling • Robot 3D energy chain • Documentation in German and English Machine Benefits Qualitative Machine Benefits • Range of 1440 mm Bcodex R E Stjpfx Ag Njw • Different transfer systems for various tasks Technical Machine Benefits • Compact plug-in control cabinet with kuka smartpad teaching pendant • Selogica programming interface in german and english • Fixed stops to limit the workspace • 4 x vacuum equipment (venturi principle) with blow-off function • 4 x 5/3 pneumatic valves with vented center position • 4 x 5/3 pneumatic valves with locked center position • 2 x eight freely programmable inputs for polishing with gripper-side sensors • Pneumatic maintenance unit with compressed air monitoring • Device interfaces for peripheral control • Payload capacity of 10 kg Extra Information Machine still under power

Condition: used, Year of construction: 2019, BOVONE ELB 102 - Year 2019 Straight-line edging machine for flat edge processing with cerium wheels. Bevels polished with rubber wheels Spindles: 10 Feed rate: 0.35 - 5.4 m/min Max. bevel width: 5 mm Min. glass dimensions: 40 x 40 mm Glass thickness: 2-30 mm Working height: 825 mm Electrical connection: 30 kW Dimensions LxWxH: 7,850 x 1,200 x 2,750 mm Bcjdpfsylvaiox Ag Nsw Weight: 4,100 kg

Condition: good (used), Code: 0308 Brand: AGLA Model: 900 Roll polishing machine for polyester and varnish - It is suitable for buffing of high gloss polyester or polyurethane paints, metals, marble and similar materials Sturdy structure Table dimensions mm 2950 x 850 Working width mm 900 Working height mm 700 Brush diameter mm 300 Motor Hp 10 Automatic table lifting Bedoympwqepfx Ag Nocw Overall dimensions mm 3100 x 1750 x 1650 h

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 750 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 810M, total height: 3,000 mm, overall weight: 5,500 kg, spindle speed (max.): 10,500 rpm, number of axes: 3, This CHIRON FZ 18 W MAGNUM HIGH SPEED, manufactured in 1998, is equipped with a Siemens Sinumerik 810M CNC controller, a 1240 × 850 mm worktable, and travels of 750/ 400/600 mm in the X, Y, and Z axes. The machine is still connected and in very good technical condition. If you are looking for high-quality milling capabilities, consider the CHIRON FZ 18 W MAGNUM HIGH SPEED we have for sale. Contact us for more information. • CNC controller: SIEMENS SINUMERIK 810M (Polish and German) • Worktable area (L x W): 1240 x 850 mm • 20-station tool turret • Machining accuracy (spacing): 0.01 mm • Machining accuracy (circular milling): 0.03 mm • RS233 port • Power supply: 400 V • The machine is in very good technical condition Bcsdpfex D Hmijx Ag New Additional equipment • Bench drill press mounted next to the machine • Mounted rotary axis • The vise visible in the photos is not included Dimensions Machine Depth 3143 mm

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Bcsdpfx Agsv Sv Eno New Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total width: 1,500 mm, total length: 11,300 mm, total height: 1,800 mm, cutting width (max.): 350 mm, saw blade diameter: 550 mm, roll width: 430 mm, spindle diameter: 35 mm, cutting length (max.): 5,300 mm, hole diameter of the disc: 35 mm, CEMIL TR550 semi-automatic cross-cut saw Specification: • condition - used, ready to work • manufacturer - CEMIL • model - TR550 • max working width - 350 mm • max working height - 130 mm • maximum cutting length - 530 cm • blade diameter 550 mm • blade mounting spindle - 35 mm • blade speed - 3080 rpm • right, receiving table 505 cm long • left table 600 cm long • tables and feed 43 cm wide • adjustable cutting speed • adjustable pusher speed • possibility of working in automatic and manual cycle • in the machine, possibility of setting, among others length and number of cut elements, board length, waste length • extraction nozzle - fi 140 mm • weight approx. 280 kg Bcsdpowa Dhljfx Ag Njw • instructions in Italian, control partially translated into Polish • overall dimensions after unfolding - 11,300 cm x 150 x 180 cm (length x width x height) • body dimensions - 110 x 150 x 180 cm (length x width x height) Additional information: • very good, factory technical and visual condition • the photos show the actual condition of the item for sale • possibility of switching on and checking the device on site • the price given in the auction does not include VAT

Condition: used, Year of construction: 2008, IDM Level HD is an industrial single-sided edgebanding center designed for edge processing in standard furniture manufacturing. The HD model features a more robust construction, making it suitable wherever consistent edge quality is required at higher feed speeds. This machine enables complete workpiece processing in a single pass—from pre-milling and adhesive application to the final edge refinement. Owing to its modular arrangement of working units, the machine can process ABS/PVC edges as well as veneer. The machine is pre-owned, fully cleaned, inspected, and ready for installation. Technical specification: • Pre-milling unit: 2 counter-rotating motors to trim the leading edge before edgebanding • Gluing unit: EVA glue pot, electronic temperature control • Pressure zone: main pressure roller + additional pressure rollers • End trimming saws: 2 motors, clean trimming of edge ends • Top and bottom trimming units: profiling, precise trimming of ABS/PVC edge Bcodpfsxztmdsx Ag Now • Front corner rounding unit: radius machining of panel corners • Rear corner rounding unit: finishing of corners at workpiece outfeed • Radius scrapers: final smoothing of edge radius • Flat scrapers: finishing of edge surfaces • Buffing unit: 2 discs for final polishing of the edge • Complete extraction system: connection points for all working units • Pneumatic pressures and adjustments: secure workpiece hold and precise regulation • Manual fine adjustment: analog readout wheels and micrometric adjustments for precision set-up

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 140 mm, turning diameter: 630 mm, turning diameter over bed slide: 380 mm, center width: 3,000 mm, turning length: 3,000 mm, The lathe has been fully overhauled and meets the technical parameters specified in the technical documentation (DTR), technical acceptance conditions (WOT), and Polish Standards. The lathe is covered by a full 12-month warranty. Availability: In stock, ready for operation, connected to power. The universal lathe TUR 630A x 3000 is designed for single-piece and small-batch production of shaft-type and disc-type parts. The machine can be used for turning, facing, boring, and cutting metric, inch, module, and DP threads, both right-hand and left-hand. It is suitable for use in serial production departments as well as in maintenance and repair workshops. Its compact design, wide range of spindle speeds, and feed rates enable both roughing and finishing machining of cast iron, steel, non-ferrous metals, and plastics. Technical Data – TUR 630A x 3000: Swing over bed [mm]: 630 Swing over cross slide [mm]: 380 Spindle bore diameter [mm]: 140 Distance between centers [mm]: 3000 Number of spindle speeds: 21 Spindle speed range [rpm]: 18–1800 Number of feeds: 42 Bjdpfjyi U Uasx Ag Necw Feed range [mm/rev]: Longitudinal: 0.08–3.26 Cross: 0.04–1.63 Motor power [kW]: 15 Overall dimensions [mm]: Length: 3700 Width: 1420 Height: 1650 Machine weight [kg]: 3400

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 8,000 mm, total length: 10,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 9,200 kg, The PORĘBA TPK-90A1/8M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: on stock available, under power, inspection possible anytime Technical data: - distance between centers/turning length: 8000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg Bcjdpfx Asyi U Rbog Njw - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - installed inverter for slow-start - overall dimensions: total length: 10000 mm width: 1800 mm height: 1865 mm total weight: 9200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover, (no steady rests) Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - MULTIFIX quick change tool post

Condition: excellent (used), Year of construction: 2007, operating hours: 24,993 h, functionality: fully functional, I am offering the following machines for sale: TRUMARK 3010 (TMS 1000) – Laser marking – 2011 US-Bad X-tra pro 300 US (MF2) Flex2 – Ultrasonic cleaning system – 2015 Mollart Drillsprint – Gun drilling / Deep hole drilling machine – 1996 Traub TNL 26 – CNC Swiss-type automatic lathe – 2004 Traub TNL 26 – CNC Swiss-type automatic lathe – 2007 Traub TNL 26 – CNC Swiss-type automatic lathe – 2009 Traub TNL 18 – CNC Swiss-type automatic lathe – 2013 Traub TNL 18 – CNC Swiss-type automatic lathe – 2014 Star SV-20R – CNC Swiss-type automatic lathe – 2019 Traub TNL18-9P – CNC Swiss-type automatic lathe – 2015 Traub TNL18 – CNC Swiss-type automatic lathe – 2014 Traub TNL18-9 – CNC Swiss-type automatic lathe – 2013 OTEK CF 1x18 T – Vibratory finishing system – 2011 Rösler FKS 04.1 E Sa-So – Vibratory finishing system – 2020 Schleifbock DP07 – Grinding & polishing (implants) – 1986 Rösler RWT 1000-I Rotary Table Blasting Machine – Blasting cabinet – 2012 Bending Machine C 202 M – Bending machine – 1990 Schmidt Hydro-pneumatic Press – Hydro-pneumatic press – 2021 TRAUB TNL 26 – CNC Swiss/short part automatic lathe Bjdpfx Agjycl Uws Necw General Model: TNL 26 Year of manufacture: 2007 Control: TRAUB TX8i Condition: used, operational Operating hours (under power): 33,905 h Kinematics & Configuration Number of axes: 13 Number of spindles: 2 Number of turrets: 2 Front attachment: yes Counter-operation: yes Main spindle Max. bar diameter: 26 mm Max. machining length: 225 mm Z travel: 250 mm Max. speed: 8,000 rpm Spindle power: 11 kW C-axis resolution: 0.001° Sub spindle Max. bar diameter: 26 mm Z travel: 250 mm X travel: 370 mm Max. speed: 8,000 rpm Spindle power: 11 kW C-axis resolution: 0.001° Tooling systems Upper turret Stations: 12 Live tooling positions: 12 Travel: X: 50 mm Z: 100 mm Y: ±20 mm Driven tools: Speed: 6,000 rpm Power: 4.3 kW Lower turret Stations: 12 Live tooling positions: yes Travel: X/Z: 50 mm Y: ±20 mm Driven tools: Speed: 6,000 rpm Power: 4.3 kW Front attachment Stations: 5 Live tooling positions: 4 Travel X/Z: 370 / 250 mm Driven tools: up to 6,000 rpm Counter-operation Stations: 5 Live tooling positions: 4 Travel: X: 73 mm Y: ±50 mm Driven tools: up to 6,000 rpm Cooling & Peripheral Equipment Coolant tank: included High-pressure coolant system: 70 bar Chip conveyor: included Workpiece conveyor: included Part removal and ejector: included Driven guide bushing: yes Bar feeder: included Electrical Data Supply voltage: 400 V Total connected load: 33 kW Dimensions & Weight Footprint: 3,706 × 1,292 mm Machine height: 1,630 mm Machine weight: approx. 4,000 kg

Condition: new, Year of construction: 2026, max. working width: 1330 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Grinding belt dimensions: 1910 x 1350 mm Sand rolling brush size: 300 x 400 mm Bedpfxsx S Dwqj Ag Njcw Sandbelt line speed: 18 m / s Number of roller-brush planetary revolution shaft heads: 8 pcs. machine thickness servo adjustment precision: 0,01 mm Length: 4200 mm Width: 2300 mm Height: 2400 mm Machine weight: 6500 kg Electrical connected load: 68 kW Standard configuration Machine configuration:2 or 3 station variants possible:1st station: Sanding belt2nd station: Brush elementsOptional 3rd station: Sanding belt or polishing station Main components:PLC: SiemensTouchscreen: SiemensLow-voltage devices: SchneiderFrequency converter: SchneiderSuction fan: Elektror, Germany Total connected load:Sanding belt motor: 15 kWBrush motor: 11 kWInfeed belt motor: 4 kWVacuum suction motor: 15 kWFrequency converter for rotating brushes: 15 kW Machine with wet vacuum cleaner Extended machine accessories

Condition: excellent (used), Catalogue number 7781 TECHNICAL SPECIFICATIONS - Maximum milling height: 216mm - Maximum milling depth: 65mm - Maximum cutter diameter: 250mm - Spindle working length: 500mm - Spindle speed: 4600 rpm - Spindle diameter: 40mm - Max tool diameter: 250mm - Worktable dimensions (L/W): 890x400mm - Motor: 11kW - 2 pneumatic material clamps Bcedpfxjyi T Ais Ag Njw - Air requirement: 6-8 bar - Dust extraction port diameter: 160mm - Dimensions (L/W/H): 1330x1200x1470mm - Weight: 970kg ADVANTAGES – Polish manufacture – Not repainted – Used milling machine, very good condition Net price: 38,900 PLN Net price: 9,260 EUR (calculated at 4.2 EUR exchange rate) (Prices may vary depending on significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7730 TECHNICAL DATA Milling Machine: - Minimum width of workpieces: 50mm - Workpiece thickness: 16-40mm - Edge thickness: 0.5-3mm - Motor power: 1.1kW - Air requirement: 6 bar - Extraction nozzle: 60mm - Dimensions (L/W/H): 1900x850x1450mm - Weight: 290kg Trimming Unit: - Blade diameter: 150mm - Table size: 750x820mm - Motor power: 0.12kW / 2800rpm ADVANTAGES – Polish-made Bedsyi Tq Hjpfx Ag Necw – Trimming unit – Profiled cutters included – Unpainted – DTR documentation – Used milling machine, in very good condition Net price: 4500 PLN Net price: 1070 EUR depending on a rate of 4.2 EUR (Prices may vary with significant rate fluctuations)

Condition: like new (used), pre-milling unit glue station for granulate maximum working height 60 mm guillotine for trimming edge band from roll precision end trimming unit milling unit for edge band excess from top and bottom of the panel profile scraper flat scraper polishing units machine length 420 cm year of manufacture 2014 Bcsdpfxjynizlj Ag Now weight 1200 kg CE marking

Condition: new, Year of construction: 2025, SCV8900TC VIBER BIG-BAG is a modern industrial dust extractor designed for intensive use in woodworking and manufacturing facilities. Thanks to the BIG-BAG system and the automatic VIBER filter cleaning system, the unit ensures continuous operation with minimal maintenance while offering a very large waste capacity. It is a unique solution on the Polish market. Key Advantages BIG-BAG – high-capacity container significantly extending the time between emptying cycles VIBER system – automatic filter shaking system ensuring long-lasting filtration efficiency TC housing – effective acoustic insulation and vibration dampening REHEAT – heat recovery from extracted air, improving the facility’s energy efficiency Bcjdpfeup Df Tex Ag Now DAMAGE PROTECT – mechanical impeller protection against hard object intake Exceptional suction system tightness – maximum efficiency and no heat loss during winter Construction and Technology The unit is equipped with a metal, dynamically balanced impeller that guarantees quiet and stable operation while maintaining maximum airflow performance. The chip extraction fan is powered by a reliable 7.5 kW motor. The impeller blade design has been aerodynamically optimized to reduce energy consumption. Precision and Performance With a capacity of 8,900 m³/h and filtration of particles down to 5 microns, the system ensures perfect working conditions even in the most demanding woodworking and industrial applications. The SCV8900TC VIBER BIG-BAG chip extractor allows seamless connection to multiple machines simultaneously, supporting continuous operation. Application The machine is dedicated to professional woodworking shops, carpentry workshops, furniture manufacturers, and large industrial production lines where maintaining clean air is crucial. The central dust extraction system performs perfectly in cooperation with machines such as panel saws, edge banders, sanders, and CNC machining centers. Standard Equipment Polyester filters with 5-micron efficiency Automatic filter cleaning system (VIBER) Built-in REHEAT system BIG-BAG waste collection unit DAMAGE PROTECT system Control cabinet Optional Equipment HEPA filter for finer dust fractions Bin fill level monitoring Differential pressure sensors Remote control system Technical Specifications Power supply voltage: 400 V Motor power: 7.5 kW Motor speed: 3000 rpm Filter type: Polyester, 5 microns / filter category “G” Filter dimensions: Ø160 × 960 mm Number of filters: 45 pcs Filtration area: 23 m² Inlet diameter: 350 mm Capacity: 8,900 m³/h Vacuum pressure: 3000 Pa Air velocity: 32 m/s Noise level: 80 dB Number of BigBags: 1 pc BigBag capacity: 1250 L Dimensions: 2400 × 1100 × 3600 mm Weight: 540 kg

Condition: used, maximum load weight: 31,420 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2026, loading space volume: 34 m³, total width: 2,550 mm, total height: 3,685 mm, Year of construction: 2023, Equipment: ABS, Kässbohrer Tank Semi-Trailer STC 34 Code L4BH Chemical First Registration Bjdsx Rtafjpfx Ag Necw Ø Unladen weight: 7,580 kg Ø Stainless steel chassis, polished to a high gloss Ø BPW axles with large disc brakes, 430 mm Ø 1st axle is a lift axle Ø Crank support legs, steel, full-load capable Ø 6 tires, size 385/65 R 22.5 Ø Aluminum rims, ALCOA Dura-Bright, high gloss Ø WABCO trailer EBS with RSS (Roll Stability Support) Ø Tank: 34,000 liters, made of stainless steel 1.4571 (AISI 316 Ti) Ø Operating pressure 3.0 bar / test pressure 4.0 bar Ø Insulation: 100 mm glass wool Ø Single compartment with 4 baffle plates Ø 5 manhole covers: 3x DN500 and 2x DN350 Ø 1 vent valve by Fort Vale Ø 1 safety valve Ø 1 check valve Ø Air line on right side, DN 50, with TW 50 connection at front right Ø Heating preparation, 4-channel hot water Ø 1 discharge outlet, DN 100 uninsulated, with sampling tap at rear right and TW 80 coupling Ø 1 emptying (cleaning) system Ø Pneumatic bottom valve Ø Hose tubes left and right, DN 150, approx. 6 m long RENTING is the new BUYING – also available from us as a full-service rental.

Condition: used, Vibratory parts feeder, vibratory finishing machine, circular vibratory bowl, tumbling drum, used machine Manufacturer: Rösler Oberflächentechnik Overall dimensions: Width: 1310 mm Depth: 1185 mm Height: 1440 mm Weight: 690 kg Trough size : Ø 1090, depth to discharge height : 240 mm Bsdpoyh En Eefx Ag Nocw Electrical data: 400 V Applications: deburring, grinding, polishing, cleaning The Rösler R185 vibratory finishing machine is ideally suited for deburring, edge rounding, cleaning, and surface finishing of metal and other components. Reliable, industrial-grade German machine designed for continuous operation.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, masina za ciscenje coskova Bedow Hpd Sspfx Ag Njcw

Condition: good (used), Year of construction: 1987, functionality: fully functional, *FOR SALE AT OUR FACTORY *OPENING SYSTEM – STENTER FINISHING AND QUALITY CONTROL INCLUDED + POLISHING Bcodpfxjyh E Hhj Ag Now (DOUBLE BRUSH, PERVERATOR BRUSHES WITH BACK STEAM HEATING AND BEATER, METAL DETECTOR AT ENTRY, ENTRY STEAMING AND STEAM BOILER, 24 KNIFE ROWS 180 CM) *1 PCS OF MPS 22 LOOM, 4 PCS VMM/22/175 (TOTAL 4+1 PCS) MPS22 = PILE AND GROUND WARP ELECTRONIC LET-OFF / MECHANICAL DENSITY SYSTEM, 1987 MODEL /175 CM, 9-FRAME C-TYPE STEEL POWER (PILE-GROUND), WORKING FOR ELASTANE GARMENT, 180 REED, MECHANICAL JACQUARD VMM 22-175= 1990 MODEL MECHANICAL JACQUARD, ELECTRONIC DENSITY SYSTEM, ELECTRONIC PILE AND GROUND WARP LET-OFF, 12 FOOT (FRAME) STEEL POWER (PILE-GROUND), 124 REED, UPHOLSTERY VELVET *1 WARP BEAM STEEL HOOD TURNING CREEL 400 CAPACITY *1 PCS NUKSA KOPS TRANSFER (CONIC) 6 POSITIONS WITH METER COUNTER