Used Polishing Drum for sale (4,975)

Condition: used, Year of construction: 2005, We offer this used machine – CFS 1000S Bin and Crate Tipper for meat processing, year of manufacture 2005. Kjdpfx Afsyr I Dysdsnb Model: 1000S Year of manufacture: 2005 Serial number: 11302 If you have any questions or require further information, please send us a message or contact us by phone.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric winch, microroll mounting Equipment: - Welded frame - Microroll mounting - Electric winch Net: €9,735.29 / Gross: €11,585.00 Article number: KTT235331600.22 Technical data: • Brand: Stedele • Model: KTT 35 • Vehicle type: Cable drum trailer • Vehicle condition: New • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (L x W x H): 330 x 163 x 0 cm • External dimensions (L x W x H): 499 x 247 x 265 cm • Loading height of the floor: 0 cm • Permissible total weight: 3,500 kg • Unladen weight: 740 kg • Payload: 2,760 kg • Chassis: Low loader (wheels next to the superstructure) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Microroll frame hot-dip galvanized - Shaft diameter approx. 60 mm - Accommodates several small cable drums • Designed for cable drums up to a diameter of 2800mm and a width of 1650mm. • Standard roll mounting approx. 80mm • Torsionally rigid chassis with massive mounting frame, hot-dip galvanized • Easy operation of the mounting frame with or without a cable drum • Barrier-free insertion of the cable drum • Play-free bearing and securing of the drum by fixing • Massive support wheel mounting and rear support • Sturdy telescopic crank supports at the rear • Electric winch instead of manual winch for accommodating cable drums • Battery installed in a box • Incl. charging cable from the towing vehicle via a 13-pin connector • Very stable, welded steel frame • Frame completely hot-dip galvanized • Robust aluminum tread plate fenders, walkable • Reversing automatic • ALKO overrun device and parking brake • 13-pin connector • Reversing lights • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • License plate holder _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! Knjdpezy Akvsfx Afdjb We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are subject to change -

Year of construction: 2021, operating hours: 8,000 h, condition: excellent (used), Real occasion due to automization of the workshop: Edilux 10+6 from 2021 for straight edges from 10 to 100mm thickness with: 10 frontal polishing spindles 3 upper bevelling spindles 3 lower bevelling spindles automatic lubrication 2 roller tables of 2mt. each Knodpfx Afoyrr Uvjdob Very good condition

Condition: used, Polish Lathe / Polishing Machine Between points: 1500 mm Centre height: 180 mm Maxi diameter to polish: Ø 380 mm Spindle CM3 Kedpjzzv Scjfx Afdonb Spindle speed driven by speed variator Pneumatic tailstock Equipped with a vaccum system (only air hose to plug in) Machine was used to polish axes Voltage: 220 V mono Dimensions (L x W x H): 3200 x 1000 x 1900 mm Weight: 1,2 T

Condition: good (used), EMME ELLE POLISHING LINE, MODEL: L.B.A.1350, USED Ksdpfx Ajhkndmjfdonb WORK TABLE: 1,350 x 3,200 mm. 4 oscillating rollers with a diameter of 350 mm + 4 polishing pads with a diameter of 180 mm. Automatic wax spraying system using high-pressure pneumatic spray guns. Work table lowering system with a 5.5 kW motor. CE compliant.

Condition: ready for operation (used), Year of construction: 2006, A robust wood shredder is offered. Infeed width: 850mm, drive power: 90kW, rotor type: U-rotor, number of knife crowns: 45, motor speed: 1480rpm, control system: PLC. Equipped with control cabinet, U-rotor with 45 knife crowns, Holtec vibrating conveyor trough type DS 750 X/Y: 750mm/18500mm. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 3800mm/1700mm/1400mm. Inspection possible by appointment. Knjdpfx Aezgwx Iefdsb

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Manual winch Features: Net: €5,037.82 / Gross: €5,995.00 Article number: BKT227281600.01 Technical data: • Brand: Blyss • Model: KTT 27 • Vehicle type: Cable reel trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 280 x 160 x 0 cm • External dimensions (LxWxH): 470 x 234 x 218 cm • Loading height of the floor: 0 cm • Permissible total weight: 2,700 kg • Unladen weight: 711 kg Knedezy Axyopfx Afdob • Payload: 1,989 kg • Chassis: Low loader (wheels next to the superstructure) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Designed for cable reels up to a diameter of 2800 mm and a width of 1600 mm. • Standard tube holder approx. xx mm • Torsion-resistant chassis with a massive holder frame, hot-dip galvanized • Easy operation of the holder frame with or without a cable reel • Barrier-free insertion of the cable reel • Play-free mounting and securing of the reel by fixing • Massive support wheel holder and rear support • Stable telescopic crank supports at the front and rear • Incl. Robust and maintenance-free manual winch • Very stable steel frame welded • Frame completely hot-dip galvanized • Plastic mudguards • Reverse automatic • KNOTT drawbar and parking brake • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • License plate holder 340x200mm _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any desired options! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, RSA center for high-performance cutting, deburring, cleaning, drying and stacking for steel and stainless steel tubes. Scope of Supply: - 1 RSA high-speed precision saw model RASACUT NC 1500 - 1 Transfer system between the RASACUT precision saw and the RSA tube feeding system 1500 - 1 RSA tube feeding system 1500 - 1 RSA cleaning system RASACLEAN ET 1500 Including: - 1 RSA drying system TURBODRY - 1 RSA RASAPORT 1500 PR system High production High precision Very short setup times Easy handling Easy machine connection RSA High performance Saw RASACUT TWIN NC 1500: Fast and Precise Round diameter: from 10 to 40 mm Kjdpjymapqefx Afdonb Square size: from 10x10 to 40x40 mm Wall thickness: from 1 to 3 mm Material: steel and stainless steel Original lengths: 6,200 mm Fixed length cutting and deburring: from 200 to 1,500 mm Round diameter: from 10 to 40 mm Square size: from 10x10 to 40x40 mm Wall thickness: from 1 to 3 mm Material: steel and stainless steel Original lengths: 6,200 mm Fixed length cutting and deburring: from 200 to 1,500 mm

Condition: not inspected (used), functionality: unexamined, Lot of machinery for making cable drums Some of the machines in the batch: Small Coil Line Claramunt Small Coil Nailer Cutter Template Table Large Nailer Rollers Large Fere Nailer Large Edge Trimmer Kjdpfethqqbox Afdenb Large Cable Outlet Machine

Condition: used, functionality: fully functional, Polyservice D2 tribo-finishing machine, equipped with a noise-reduction enclosure and a remote control unit. Kjdpfx Aozrpkmsfdsnb

Condition: excellent (used), functionality: fully functional, New 6 kW resonator and new cutting head to be installed by the end of 2025 Investment approx. EUR 190,000 Immediately available – inspection possible Manufacturer: Bystronic Model: BySprint fiber 3015 Year of manufacture: 2022 / new resonator and cutting head in 2025 Sheet metal format: Maximum format, 4,000 x 2,000 mm Operating hours: After upgrade at the end of 2025: approx. 1,400 operating hours, approx. 550 cutting hours Before upgrade until 2025: approx. 17,700 operating hours, approx. 7,500 cutting hours SPECIAL EQUIPMENT: - Cut Control Fiber - Part and cross conveyors in the cutting area - Dust extraction system with 200-liter drum adapter - Upgrade in 2025: 6,000-watt fiber laser with a new cutting head Standard equipment: BySprint Fiber 4020 Pallet change system with 2 pallets Enclosed housing/roof Scrap bin with rollers CNC control and cabinet Touchscreen with user interface for ByVision Operation and comfort Maintenance Messenger Restart Manager System Manager Handheld operating device ByHand Cutting parameter assistant Uninterruptible power supply (UPS) Cutting bridge OPC interface Cutting Cutting head Piercing jet ByPos Fiber Detection Eye Nozzle cleaning Scanning Fiber laser sources Tank heater Tropicalization Interface to automation/handling Cooler Operator protection in the cutting area Operator protection in the loading/unloading area Voltage 400V / 50Hz Compressed air (machine incl. laser source and cooling unit) Material specification Part tolerances and cutting surface quality Cutting gas supply and cutter quality TECHNICAL DATA: Maximum positioning speed parallel to the axes X/Y: 100 m/min Maximum positioning speed simultaneous: 140 m/min Position deviation Pa (VDI/DGQ 3441): +/- 0.1 mm Position scatter Ps (VDI/DGQ 3441): +/- 0.05 mm Edge detection accuracy: +/- 0.5 mm Knjdpfx Afoz Dtygodeb Maximum workpiece weight: 1580 kg Table change time: 35 seconds Laser power: 6,000 Watts Maximum sheet thickness: Steel: 30 mm Stainless steel: 25 mm Aluminum: 20 mm Brass: 15 mm Copper: 15 mm Machine weight (without extraction, cooling unit): approx. 15,000 kg Machine dimensions, approx.: 13,743 mm length, 6,670 mm width, 2,565 mm height Transfer of programming software possible. This used machine can be inspected under production conditions. All information is subject to change without notice – sale excludes any guarantees and warranties. Subject to prior sale.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 22,000 kg, overall weight: 29,000 kg, axle configuration: 2 axles, loading space length: 7,500 mm, loading space width: 2,170 mm, total length: 11,700 mm, total width: 2,550 mm, total height: 2,650 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Fine-grain steel welded construction, drawbar plate with interchangeable 2 kingpin, with 2 kingpin positions Outer frame slightly angled with load-lock profile for lashing straps 2 pairs of lashing eyes embedded in the outer frame on the gooseneck, 5 tons each 8 pairs of lashing eyes embedded in the outer frame in the well, 5 tons each 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2 outrigger wedges with holder Aluminum side underrun protection Steel rear underrun protection Quarter-shell fenders in front of and behind the axle assembly 2 storage boxes made of stainless steel, w=600/h=400/d=500 mm, with polished, lockable door 2 pairs of pole pockets embedded in the outer frame on the gooseneck, internal dimension 70 x 40 mm 6 pairs of pole pockets embedded in the outer frame in the well, 70 x 40 mm Internal dimensions!! Internal width between the poles 2420 mm!! 3 lashing/pole strips in the well, transverse embedded in the floor over the entire width up to the outer frame, approx. 100 mm high. With 20 mm round steel strips, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). At the bottom with an angle plate as a cover, half open downwards. For lashing and inserting poles 80 x 80 mm. Pieces of insertable poles W=80/ D=50/ L=1200 mm, hot-dip galvanized Pieces of insertable poles W=80/ D=80/ L=1200 mm, hot-dip galvanized Kedoi Ri Hvepfx Afdsnb Rear extension, mechanical, with hand crank, extendable by approx. 1500 mm, lockable every 500 mm, with support beam, at the center of gravity at approx. 500 mm, loadable with 2000 kg over the entire width, at 1000 mm with 1000 kg over the entire width and at 1500 mm with 500 kg over the entire width, including underrun protection with lighting, extendable. 2 pairs of insertable poles W=80/ D=80/ L=1200 mm, hot-dip galvanized Storage compartment for insertable poles, open, on the front panel or below the loading area (for 10 insertable poles 80 x 50 x 1200 mm and 4 insertable poles 80 x 80 x 1200 mm) Axles & Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Last axle with steering knuckle, with automatic reversing lock via reversing light and additional locking function on the vehicle via a button. Air suspension with raise/lower valve Wheels & Tires 235 / 75 R 17.5 according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load recognition via EBS-Canbus signal, for display on the display in the driver's cab, truck must be appropriately prepared, no factory installation. Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via the reversing light 1 LED rotating beacon with holder, swit

Condition: used, axle configuration: 3 axles, first registration: 03/2015, loading space length: 13,400 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, total length: 14,040 mm, total width: 2,600 mm, total height: 2,700 mm, tire size: 385/65R22.5, tire condition: 60 %, color: white, Year of construction: 2015, Equipment: ABS, tail-lift, Axle Configuration Tire Size: 385/65R22.5 Rear Axle 1: Tire Tread: 60%; Reduction: single reduction Rear Axle 2: Tire Tread: 70%; Reduction: single reduction Rear Axle 3: Tire Tread: 50%; Reduction: single reduction Weights Unladen Weight: 8,834 kg Payload: 32,166 kg GVW: 41,000 kg Functional Features Tail Lift: DHOLLANDIA 2000KG Body Manufacturer: Krone Condition Knsdpfxozultps Afdjb Damage: None = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - E-mail: - Website:

Condition: new, TECHNIC Single-Disc Floor Scrubber/Polisher Choose the professional TECHNIC series – one purchase, many applications! The TECHNIC JH-002 model is a powerful, versatile single-disc scrubber/polisher designed for heavy-duty cleaning, deep cleaning, and polishing of various floor types (PVC, porcelain tile, terrazzo, concrete, linoleum, stone, and many others). TECHNICAL SPECIFICATIONS FOR THE TECHNIC SCRUBBER: Model: JH-002 Manufacturer: TECHNIC Series: Professional Power supply: 1 / 230 / 50 (Ph/V/Hz) Connected load: 1100W Brush/disc speed: 154 RPM Power cord length: 12m Steel handle and control grips: Yes Brush/pad working diameter: 410mm Noise level: ~60dB Machine dimensions (H x L x W): 122cm x 55cm x 40cm TECHNIC SCRUBBER EQUIPMENT: 1 x Hard PPL brush (0.8mm) 1 x Medium PPL brush (0.5mm) 1 x Soft PPL brush (0.3mm) 1 x Pad holder with plastic drive plate 6 x Americo-type scrubbing pads (6 hardness levels) 1 x Cleaning solution tank 1 x Drain hose for the head 1 x Power cord holder 1 x User manual (Polish and English) APPLICATIONS FOR THE TECHNIC JH-002 SCRUBBER The machine is ideal for use in: cleaning companies (routine maintenance and deep floor cleaning), schools, government offices, hospitals, clinics, office buildings, warehouses, production halls, workshops, hotels, guesthouses, restaurants, commercial facilities, shopping malls, shops. Thanks to interchangeable brushes and pads, a single machine allows you to: scrub and deep-clean, refresh and maintain, prepare surfaces for protective coatings. ADJUSTABLE HANDLE: Kjdpjz A Tubsfx Afdenb The polisher features an adjustable handle, allowing the height to be precisely tailored to the operator's stature. This enables the machine to be operated in a natural, upright position, significantly reducing fatigue in the back, shoulders, and arms during extended use. An ergonomic handle setting also ensures better machine control—making it easier to maneuver near walls, in corners, or along narrow corridors. Proper handle height improves not only comfort but also steering precision, directly impacting work quality and safety. The JH-002 model stands out due to its steel handle and grip assembly—a feature that clearly distinguishes it from many other polishers on the market, where these components are often made of plastic. The handle is the part most vulnerable to damage, as it is used to guide, lift, transport, and often lean the machine against walls. The use of steel significantly increases resistance to cracking, breakage, and deformation, thereby extending the machine's overall service life. Thanks to the handle's robust metal construction, the TECHNIC scrubber is more durable, safer to operate, and better equipped for intensive professional use.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: DAM558, Equipment: CE marking, Box Freezer: Ultra-low temperatures of -100°C achieved by direct injection of liquid nitrogen. Knedpfsz D Dftex Afdsb Door opening: 0.7 x 2 m, usable internal space: W: 0.7 x D: 1.45 x H: 2 m Machine dimensions: W: 1.725 m, D: 1.795 m, H: 2.285 m LN² connection: 1/2", LN² supply pressure: 2.5-3 bar Power supply: 3 x 400V + N + PE, 16A Material: Stainless steel 316, thickness 1.5 mm, T.I.G. fully welded box Finish: Exterior polished K320 Interior: 2B Insulated with hard foam, average density +/- 40-50 kg/m³ Slightly angled door opening for easy loading. 4 x M16 lifting points Passive exhaust connection: 250 mm Fan speed adjustable with a variable frequency drive. Siemens HMI controls with multiple recipes. Documentation: CE declaration, food-grade certified, electrical diagram, user manual, after-sales service. 1-year warranty.

Year of construction: 2016, operating hours: 7,000 h, condition: excellent (used), functionality: fully functional, For sale: Terra Select T60 on crawler chassis Year of manufacture: 2016 with approx. 7,000 operating hours Knodjy Ahi Eepfx Afdjb 81 kW JCB engine without Adblue Long discharge conveyors Extra-large feed hopper Drum: 2,200 mm x 5,500 mm

Condition: used, axle configuration: 3 axles, first registration: 02/2001, color: other, Year of construction: 2001, Empty weight: 6.990 kg Axle 1: left 10 mm right 3 mm Axle 2: left 7 mm right 6 mm Axle 3: left 6 mm right 6 mm Kodpfx Afsrrwlbedjnb

Condition: used, empty load weight: 3,300 kg, maximum load weight: 14,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2008, next inspection (TÜV): 11/2026, suspension: air, tire size: 235/75R17,5, Equipment: ABS, GERMAN DEALER offers: BDF swap body trailer Multiple units in stock GALVANIZED Twin tires 235/75R17.5 Long air suspension bellows Lifting height 1390 mm Drum brakes Net unit price 3,950 EUR Many chassis and swap bodies in stock! ##### PLEASE CALL - NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO-COMMERCIAL VEHICLES HAS BEEN DELIVERING SINCE 1983! VIEWING BY APPOINTMENT ONLY! ##### Knedsz D Akhspfx Afdeb

Condition: used, empty load weight: 3,300 kg, maximum load weight: 14,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2008, next inspection (TÜV): 11/2026, suspension: air, tire size: 235/75R17,5, Equipment: ABS, GERMAN DEALER offers: BDF swap body trailer Multiple units in stock GALVANIZED Twin tires 235/75R17.5 Long air suspension bellows Lifting height 1390 mm Drum brakes Net unit price 3,950 EUR Many chassis and swap bodies in stock! ##### PLEASE CALL - NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO-COMMERCIAL VEHICLES HAS BEEN DELIVERING SINCE 1983! VIEWING BY APPOINTMENT ONLY! ##### Knsdpfoz D Akbjx Afdob

Condition: used, BRUKS 1700 ML industrial drum chipper designed for processing logs, slabs, offcuts and other wood waste into high-quality wood chips. Suitable for demanding sawmill and biomass production. Technical specifications: Manufacturer: BRUKS Model: 1700 ML Capacity: up to 100 m³/h Knjdpezpwaqefx Afdsb Chip length: 15–30 mm (up to 50 mm) Chipper disc diameter: 1700 mm Number of knives: 4 Knife dimensions: 525 × 180 × 16 mm Disc speed: 530 rpm Infeed opening: 500 × 300 mm 2 upper and 6 lower feed rollers Feed drive power: 2 × 4 kW Required chipper motor power: 75–150 kW Weight: approx. 5 500 kg

Year of construction: 2017, operating hours: 1 h, condition: used, functionality: fully functional, INTEGRATED DRYERS AND PELLETING SYSTEM WOOD SHAVINGS DRYING OLIVE POMACE DRYING FULL AUTOMATION WITH VARIABLE SPEED MOTORS STAINLESS STEEL FEEDING AUGERS Knsdpfx Afow Hgbhjdsb CONVEYOR TRANSPORT SYSTEMS FUEL AND PRODUCT FEED BUNKERS 9 METER STAINLESS ROTARY DRUM 15 METER IRON ROTARY DRUM 8 MILLION KCAL SOLID FUEL BOILER WITH FULL CAPACITY, IT HAS THE LARGEST WOOD SHAVING DRYING CAPACITY IN TURKEY AT 15–20 TONS/HOUR. IN ACCORDANCE WITH EUROPEAN STANDARDS FOR DETAILED INFORMATION, PLEASE CONTACT US

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 2,000 kg, Drum clamp Knedpfxjx Rafuo Afdjb ISO Class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Beer keg clamp Year 2019 ISO 2A (41 cm) Capacity 2,000 kg Width 950 mm Forks 1,200 mm ID OS1826

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 2,000 kg, Drum clamp ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully operational Kedox N U R Aspfx Afdsnb Technical condition: good Description: Beer keg clamp Year 2019 ISO 3A (51 cm) Capacity 2,000 kg Width 1,020 mm Forks 1,200 mm ID OS1761

Year of construction: 1988, condition: good (used), machine/vehicle number: D 05103, Item No. 13439 Kjdpfx Ask D Ewgefdsnb Technical data: - Polishing wheel / grinding wheel dimensions: approx. 300 x 40 x 76 mm - Grinding belt dimensions: approx. 3500 x 50 mm - Contact wheel dimensions: 400 x 50 mm - Drive speed: 1450 rpm - Drive: 400 V / 1.8 kW - Space requirement: approx. W 1100 x H 2450 x D 800 mm - Weight: approx. 300 kg

Condition: ready for operation (used), Year of construction: 2020, Wichelmann Drum Coater Potato Flour Coater Potato flour is conveyed into the drum via a spiral screw. Kjdpfx Aowb Ukasfdenb The discharge conveyor has a shaking and trill function. The speed control knob is defective. The shaft has a dent and is bent. The shaft where two wheels are mounted to rotate the tumbler is bent.