Used Polishing Machine for sale (64,915)

Year of construction: 2018, condition: ready for operation (used), Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible. Lhjdpfx Aoxg Rhpodwsb

Year of construction: 2001, condition: ready for operation (used), Connected load: 26kVA, weight: 3.5t. Lhjdpjg E Uhfjfx Adweb

Condition: used, Year of construction: 2010, machine/vehicle number: RPM 1000 ZO, Used robots - Polishing machines P 1000 ZO right-hand design Polishing discs Ø 1000 mm With feed and oscillation Lhsdpfxsxludls Adweb

Year of construction: 1977, condition: used, machine/vehicle number: 11 U, Technical data: - Speeds: 850 to 12,000 rpm - Flexible shaft approx. 2 m - Mobile undercarriage - Suitable for grinding and polishing tools - Drive: 380 V / 1.0 HP - Space requirements approx. W 500 x H 1000 x D 500 mm - Weight approx. 45 kg Lhodpfjwy Ulzox Adwjb - Mobile undercarriage

Condition: used, Year of construction: 1996, machine/vehicle number: xxxx, Lg.no. 24265 Technical data: - Shaft holder 35 mm Ljdpfx Aetx Ubrodwshb - Shaft groove length 90 mm - Drive speed 1450 rpm - Drive 400 V / 4.4 kW - Space requirement approx. W 1300 x H 2500 x D 800 mm - Weight approx. 200 kg

Condition: new, -new-Zum sanding from nahezu allen work piece-formen about Bürstwerkzeuge or Lufttrommel(gerade, runde, gebogene Profile etc.)- Massivholzschliff- intermediate lacquer sanding- Bürsten- polishing- different Schleifmittel einsetzbar durch30 mm tool receiver- Optional with variabler rev adjustmentTechnische Daten:motor performance: 2,2 kWrpm: 1000/1500 or 1500/3000 rpmshaft diameter: 30 mmMax. abrasive product: 350 mmSchleifkörperlänge: 275 mmweight: ca. 180 kgArt.-No. 1090-900000inclusive:1 piece rpm infinitely variable adjustable No. 1090-9900102 piece Vario ModularD. 300 mm, B. 250 mmNo. 1090-990107located in  97447 Gerolzhofensale in current condition as seen- free on truck - Lodpfxjvwf Sne Adwshb

Condition: used, Year of construction: 1988, used, good condition cleaned, tested manufactured by Johannsen type T 45 built in 88 number of aggregates R + L Lon motor 1,5 kW exhaust connection D 140 mm Lsdpfxovwf Tre Adwjhb required space ca. l x w x h mm 1000 x 500 x 1000 weight ca. 130 kg total connected power ca. 1,5 kW located in 97447 Gerolzhofen sale in current condition as on Foto seen - free on truck -

Condition: good (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, double-sided, rotational speed infinitely variable, type plate available, 2008 ACME Robotic Polishing Cell with Fanuc M-710i Robot – Fully Automated Metal Finishing Solution Looking for a high-performance robotic metal polishing system? Don’t miss this 2008 ACME Manufacturing Co. Robotic Polishing Cell, engineered for precision, consistency, and automation. Ideal for metal finishing, surface treatment, automotive, aerospace, or industrial manufacturing. 🔧 Manufacturer: ACME Manufacturing Co. 🚨 Machine Type: Robotic Polishing Cell 📅 Year of Manufacture: 2008 🤖 Robot Model: Fanuc M-710i 📍 Location: Ireland 📦 Condition: Good – fully operational and maintained 🟢 Availability: Immediate ✅ Machine Overview: This 2008 ACME robotic metal polishing cell is a fully automated surface finishing system equipped with a Fanuc M-710i 6-axis robot and designed for precision metal polishing in high-volume environments. Ideal for manufacturers in medical device, automotive, aerospace, general engineering, or stainless steel finishing sectors. 💡 System Includes: ✅ Fanuc M-710i Industrial Robot – Reliable 6-axis automation for complex polishing paths ✅ Two Twin-Head Polishing Stations – Simultaneous dual-surface processing ✅ Automatic Polishing Paste Delivery Units – Supports both fine and coarse pastes for optimal finish ✅ Vibration Monitoring Point – Ensures consistent surface quality and machine health 📈 Benefits: Increased throughput and reduced labor costs Repeatable, uniform polishing quality Ljdpfx Asxtftysdwjhb Fully automated and programmable – minimal operator input Compact, integrated cell for efficient floor space use Core Functionality Material Removal: The robotic system employs abrasive belts or wheels to remove material from workpieces, effectively smoothing edges, removing imperfections like flash, and achieving specific surface finishes. Precision and Repeatability: Unlike manual polishing, which can vary from part to part, robotic systems ensure consistent and repeatable results, crucial for high-precision applications. Versatility: ACME cells can be adapted for a wide range of materials and part geometries, including orthopedic implants, automotive components, and more. Integrated Automation: These cells often feature part handling systems, like conveyors and dual-drawer arrangements, to enable continuous and unattended operation. Dust and Sound Containment: Built-in enclosures help confine dust and noise generated during the process, improving safety and environmental conditions. Key Features and Benefits Increased Production Rates: Robotic polishing can significantly increase the number of parts processed per hour compared to manual methods. Reduced Costs: By automating the process, companies can reduce abrasive media costs, labor costs, and potentially decrease scrap rates. Improved Safety: Robotic systems eliminate the need for operators to manually handle potentially hazardous materials and tools. Enhanced Consistency: Robots deliver consistent, repeatable results, ensuring uniform quality across all parts. Process Optimization: ACME cells allow for programmable belt speeds and other parameters, enabling optimization for different materials and finishes.

Condition: excellent (used), Continuous rotary table HAU R60 - 1800, with 60 workpiece spindles, mounted in a pitch circle diameter of 1800mm, 3 polishing units with 7,5 kW each, polishing shaft diameter of 50 mm, width of polishing wheel 2 x max. 400 mm and 1 x 280 mm, diameter of polishing wheel s max. 420 mm, motorized longitudinal and height adjustment of polishing units, machine equipped with liquid compound feeding system More pictures on demand Lhodpfx Adsm Nbubewsb

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1500 (maximum part processing length 1500 mm), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter. Lhodpfx Adow Au A Ejwob

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1000 (maximum part processing length 1000 mm, respectively), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. Lhsdpfxew Avptj Adwjb The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: good (used), Year of construction: 1971, Spherical head polishing machine for machining spherical surfaces. Data: Manufacturer: Thielenhaus Type: PMS50B6A Year of manufacture: 1971 Operating voltage: 380V Rated current: 48A Control voltage: 
~ 220V = 24V 
Weight 9,5t Fully automatic feeding device Lhodpfx Adeg Rxl Dswsb

Condition: good (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: RSPL 19, We are selling a robotic long grinding and polishing system. With this system, parts can be ground and polished. - 1 x tool changer on the robot side - 1 x servo-driven table for holding 9 parts, 360-degree rotation, 9 meters in length - 1 x polishing unit 450mm x 600mm, with liquid polishing compound feed - 1 x brushing unit for brushes 400mm x 600mm, with liquid polishing compound feed - 1 x grinding unit for abrasive belts, length 1,000mm and 150mm width, with oil mist device consisting of three low-pressure spray guns - 3 x racks for tools - 1 x truing device for polishing wheels - 1 x measuring plate for polishing unit - 1 x control cabinet with PLC The robot and the linear axis have already been sold. If you have any further questions, please feel free to contact us! Lhodpfx Adjwdnb Rjwjb

Condition: good (used), machine/vehicle number: RTT HAU T3, Used rotary table polishing machine Ljdpfjh Ug Ulex Adwshb Manufacturer: Hau Rotary table with 6 working spindles and 3 polishing stations with high pressure guns, 5,5 kW motors, control cabinet

Year of construction: 2016, condition: new, The single-sided polishing machine is a polishing machine for manual also robot editing to polishing of parts made of aluminium, steel, brass and zinc die-cast. Technical data: Polishing Pad: Max Ø 450 mm Spindle diameter: 35 mm Polishing wheel width: max 50 mm Suction connection: Ø 100 mm Dimensions (Lxwxh): 1800 x 1300 x 1800 mm Weight: 180 kg Supply voltage 3 x 400 V Power: 4 kW Height up to the polished shaft on request Made in Germany Warranty: 12 months Lodpfx Asc Rfg Uodwjhb Optional: Extension with a frequency inverter will cost €950 per polishing machine. 1 piece FU, 1 potentiometer for regulating; 1 main switch

Year of construction: 2022, condition: new, machine/vehicle number: RPM500_OSZ2, Robot - polishing machine RPM500_OSZ2 Oscillation (50 mm) and delivery (100 mm) Polishing discs DM - 1000 mm Lhjdpsd Dt D Iofx Adwob Power - 4 kW Extraction support - 100 mm There are two piece

Condition: good (used), HR 4 automatic polisher Manufacturer: Hau Lodoqmfv Djpfx Adwjhb With 4 working spindles. 1 spindle is used for loading and unloading, two work spindles are in constant use.

Condition: good (used), Used rotary indexing table polishing machine Manufacturer: Hau Rotary indexing table with 6 work spindles and 3 polishing stations with oscillation and high-pressure guns, 5.5 kW motors, gripper clamping system, switch cabinet Lhsdpjqmfv Sjfx Adwob

Condition: as good as new (ex-display), machine/vehicle number: PM1000_ERB, The polishing machine for robot processing is sold. Manufacturer: SHL polishing wheels DM 1.000 mm 5,5 kW drive power Lhsdpfed Hh Txsx Adweb

Condition: refurbished (used), Year of construction: 2020, machine/vehicle number: PM_1000, Used polishing machine for manual processing. Drive power 5.5 kW Lhjdofiugujpfx Adwsb Polishing discs diameter - 1000 mm

Year of construction: 1998, condition: good (used), machine/vehicle number: PM 1000_01, 1x polishing machines for robot processing sold. Execution 1 x left Ljded S R Agopfx Adwjhb Manufacturer: SHL polishing wheels DM - 1000 mm drive power 7,5 kW Infeed suction flap

Year of construction: 2022, condition: new, Machine for polishing wheels with diameter 1.000 mm x 150 mm width with 7,5 kW drive power, V-belt drive, polishing hood polishing wheel: max. Ø 1.000 mm spindle diameter: 45 mm Ljdpfx Ajgxugasdwjhb polishing wheel width: max. 150 mm suction connection: mØ 160 mm dimensions (LxWxH): approx. 1.200 x 1.100 x 1.800 mm Weight: approx. 300 kg Electrical connection: 3 x 400 V, 7.5 kW, IP54

Year of construction: 2022, condition: new, Machine for polishing wheels with diameter 500 mm x 100 mm width with 4 kW drive power, V-belt drive, polishing hood Technical data: Polishing wheel: max. Ø 500 mm Lhodsgxughjpfx Adwjb spindle diameter: 35 mm polishing wheel width: max. 100 mm suction connection: Ø 100 mm dimensions (LxWxH): 900 x 600 x 1900 mm weight: approx. 250 kg Connected voltage: 3 x 400 V Connected load: 4 kW

Year of construction: 2022, condition: new, Machine for polishing wheels with diameter 500 mm x 100 mm width with 4 kW drive power, infeed, polishing hood. Technical data: Polishing wheel: max. Ø 500 mm spindle diameter: 35 mm polishing wheel width: max. 100 mm infeed: 100 mm suction connection: Ø 100 mm dimensions (LxWxH): 900 x 600 x 1900 mm Weight: approx. 250 kg Connected voltage: 3 x 400 V Connected load: 4 kW Lhjdpfx Adegxugtowjb

Year of construction: 2022, condition: new, Machine for polishing wheels with diameter 1.000 mm x 150 mm width with 7,5 kW drive power, infeed and oscillation, polishing hood. Lodogxugdspfx Adwshb polishing wheel: max. Ø 1.000 mm spindle diameter: 45 mm polishing wheel width: max. 150 mm infeed: 200 mm oscillation: 50 mm Suction connection: Ø 160 mm dimensions (LxWxH): approx. 1.200 x 1.100 x 1.800 mm Weight: approx. 300 kg Electrical connection: 3 x 400 V, 7,5 kW, IP54