Used Polystyrene Mill for sale (9,661)

Condition: used, Year of construction: 2017, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 20.000 U/min tool taper HSK-A63 In our assessment, the machine is in good used condition Bjdpfjypwbiox Agkewi and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2016, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 15.000 U/min tool taper BBT-40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Bjdpfoypwbcjx Agkewi Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 1983, Machine with digital readout. Including tool holders. Bwjdpsymalfsfx Agkji Axe X: 1150mm Axe Y: 1000mm Axe Z: 600mm spindle diameter 100 mm table surface area 1000 x 1120 mm tool taper 50 SK turning speed range 4 - 1250 min-1 spindle stroke 630 mm main drive 20 kW feed range 1 - 4000 mm rapid travel range 4000 mm workpiece weight max. 3000 kg total power requirement 40 kW weight of the machine ca. 14 t dimensions of the machine ca. 6,9 x 3,6 x 3,3 m

Condition: used, Used Kemutec KEK Model 120 CM stainless steel cone mill: - Manufacturer: Kemutec KEK, Coperion group (). Bodpfx Ageymnydjkowi - Model: 120 CM. - Rotor type: round blates beater direct top driven by LS Leroy Somer electric motor 0,75kW, 220-480V, 3ph/50Hz, 2840rpm. Motor is Atex rated: II 2G EExde II B T4. Rotor/blade has changeable speed via IMO Jaguar VFI. Potentiometer mounted on doors of main switchboard. - Screens: (2) Cone screens type 0,85 and 1,0 associated with the machine. Cone screen top diameter 120 mm and bottom diamter 45 mm, cone height 80 mm. - Others: Mounted on stainless steel frame with wheels. Control panel included. - Overall dimensions: 1500 L x 850 W x 1100 mm H.

Condition: used, Year of construction: 2007, x-travel 620 mm y-travel 420 mm z-travel 400 mm control TNC 320 HEIDENHAIN spindle taper ISO 40 spindle turning speed range 50 - 4.000 U/min table-size 800 x 400 mm Bodpfx Aeyq Sv Dogkjwi table load 400 kg feeds -stepless- 0 - 8000 mm/min rapid traverse 8,0 m/min power capacity 6,0 kW quill stroke 80 mm voltage 400 V total power requirement 17,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,90 x 2,70 x 2,05 m - .: 90288 - Control: TNC --- - electrical hand wheel - Horizontal milling spindle - Coolant equipment

Condition: good (used), Milling Machine Mikron WF 32 CH Bwodpfx Agjyq Hcreksi Technical Data: X-axis: 560 mm Y-axis: 500 mm Z-axis: 400 mm Clamping table Clamping surface vertical: 300x450 mm Number of threaded holes: 2 x 6 Speed range: 25-6300 rpm Swivel range vertical milling head: +45°

Condition: good (used), Year of construction: 1996, Milling Machine Mikron WF 21C 1996 Technical Data: Bwjdpfx Aeyq E I Togkji X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Clamping Table Clamping surface, vertical: 300x450 mm Number of threaded holes: 2 x 6

Condition: excellent (used), For sale: high-quality milling head from the renowned brand Walter – Xtra-tec® series, designed for precise roughing and semi-finishing of metals. Premium industrial tool, ideal for CNC machining centers and conventional milling machines. • Working diameter: Ø80 mm • Model: F4033.B27.080.Z07.06 • Mount: SK40 / ISO40 • System: Xtra-tec® • Number of insert pockets: 7 • High-quality build – German Walter precision • Applications: face milling, machining of steel, cast iron, alloys • Condition: used, very good technical condition, ready for work. This milling head delivers excellent performance and long service life – ideal for industrial, workshop, and production applications. Bsdpfjxlgnijx Agkjwi

Condition: excellent (used), Deckel FP1 Tool Milling Machine with New Digital Readout (3-Axis) Machine No. 55192-08 Travel paths: X 300 mm Y 150 mm Z 340 mm Bjdpfx Agjyn Iphokowi Spindle speed 40-2000 rpm Feed rate 10 to 500 mm/min Fixed angle table 600 x 210 mm, max. load 200 kg Quill vertical travel 60 mm SK40 with DECKEL saw thread S20 x 2 Vertical and horizontal spindle Milling head manually swivels (+/- 90°) Equipment/Accessories: - As-new machine table - New 3-axis digital readout - Machine vice - New spindle nut X-axis - New SK40 inner spindle - Control cabinet retrofitted with new main switch - Coolant system with new hoses - Chip tray - Emergency stop The machine has been technically inspected and is in excellent working condition. Backlash X-axis 0.05 mm Backlash Y-axis 0.2 mm Backlash Z-axis 0.4 mm Net price ex works, loaded from stock

Condition: new, Year of construction: 2025, neu 2025 030138 prompt, Zwischenverkauf v Deutschland 3444.77 € 1 13 mm MK 2 220 mm 40 - 4000 U/min 0,54 (230 V, frequenzgere kW M 10 (steigungsabhängig) 520 mm 400 mm 850 mm 62 kg 60 mm 85 - 370 mm 420 mm 300 x 250 mm 70 mm Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Bjdpfx Agoxcbhrokjwi Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: good (used), Year of construction: 1983, functionality: fully functional, Universal Production and Tool Milling Machine Type: UWF 700 PH Machine No.: 5670 Serial No.: 034650 Year of manufacture:1983 Control system: Positioning and path control incl. display HEIDENHAIN TNC 135 3-axis manual input control TECHNICAL DATA Working area X-axis (longitudinal) manual/automatic: 410/390 mm Y-axis (transverse) manual/automatic: 310/290 mm Z-axis (vertical) manual/automatic: 400/380 mm Quill travel vertical: 63 mm Clamping surface, vertical: 830 x 224 mm Number of T-slots: 4 Angular table clamping surface: 700 x 285 mm 6 T-slots: 12 H8/45 mm Workpiece weight: 200 kg Distance table – spindle nose (vertical): 0 – 515 mm Distance table – spindle center (horizontal): 30 – 565 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Number of speeds: 12 Speed progression (geometric steps): 1.4 Tool holder (DIN 2079): ISO 40 Feed range (all axes): 2 – 1500 mm/min Rapid traverse (all axes): 1.5 m/min Operating voltage: 380 V/50 Hz Machine dimensions: 1.2 x 1.6 x 1.7 m Space required: 2.1 x 2.1 m Machine weight: 1100 kg Bjdpex Ry Atofx Agkjwi EQUIPMENT / ACCESSORIES  Hand operation and CNC program control  Vertical and horizontal machining  Swiveling vertical milling head  Adjustable-angle vertical milling head  Various tool holders  Manual quill feed (vertical)  Angular table 700 x 285 mm  Coolant system  Coolant and chip tray  Electrically secured chip guard in work area  Mounting elements  Machine lamp  Documentation Condition: Control system overhauled, workshop tested

Condition: good (used), Technical data: Travel paths: Longitudinal X-axis: 762 mm Cross Y-axis: 305 mm Vertical Z-axis: 406 mm Quill travel: 127 mm Spindle mount: collet chuck Table size: 1067 x 229 mm Speed range: 50–3750 rpm in two steps Bedjw Ebhmopfx Agkjwi Weight: 1000 kg Equipment: - SONY digital readout, 2 axes (X and Y-axis) - Machine lamp - Drill chuck 0–13 mm - Collet system - Machine vice, jaw width 150 mm - Safety guard, electrically secured, type ZE-FS 30-300, fully mounted - Documentation Condition: good, workshop-tested

Condition: used, Year of construction: 1998, x-travel 600 mm y-travel 430 mm z-travel 460 mm Control MSD-501 table surface area 900 x 500 mm T-slots (number x width x distance) 5 x 18 x 100 mm table load capacity 500 kg Spindle nose table removal 150 - 610 mm spindle tunring speed 12.000 U/min torque 166,7 Nm tool taper BT 40 number of tool places 30 Pos. max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg Feed ( x / y / z) 16.000 mm/min rapid traverse ( x / y / z ) 32.000 mm/min The machine is from its First owner and has low operating hours. Bodpfjyn R Nksx Agkewi It is very well maintained and can be inspected under power by appointment. Technical features & accessories: - Internal coolant system - Tool measurement - 30-position tool changer BT 40 Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: used, Year of construction: 2017, x-travel 1.100 mm y-travel 610 mm z-travel 610 mm Control Heidenhain table dimensions 1.100 x 610 mm number of tool places 40 Pos. tool taper SK 40 Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden. Zubehör, abgebildete Werkzeuge und Spannmittel gehören nur zum Lieferumfang wenn dies in den Zusatzinformationen vermerkt ist. Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten! Bedpjyn R Ndofx Agkowi

Condition: like new (used), Year of construction: 2014, Parts shown by hand not come. Bjdpfsh Ryvbex Agkowi X1050 mm Y 870 mm Z 970 mm Complette tehnical documentation come with machine.

Condition: used, Year of construction: 2010, - Model: MECAPRO 3015 - Year: 2010 - Table size: 3050x1530 mm - Tool stations: 6 pcs - Spindle: 4 kW - Vacuum: 4 Siemens pumps, 2.2 kW each - Controller: Mecanumeric CN7000ISO Bjdpjypi Hqefx Agkswi

Condition: used, Year of construction: 1992, Vertical and horizontal milling machine Make: EUMEGA Type: MDV5 Year: 1992 Technical data: Make: Eumega Type: MDV5 Year of manufacture: 1992 Table size: approx. 305 x 1270 mm X-travel: approx. 460 mm Y-travel: approx. 500 mm Z-travel: approx. 610 mm Speed: variable Tool holder: SK 40 Total power: 3.75 kW Dimensions WxDxH: 1200 x 1100 x 1800 mm Weight: approx. 2.6 t All data without guarantee. A demonstration is possible at any time in our exhibition hall. Bwedpfxewncwhs Agkei

Condition: used, No. 10025 Cutting mill Alpine RO 40/63 Used According to our customer, the machine is fully functional and can be inspected on site Motor power 30 kW Rotor diameter 630 mm Rotor width 400 mm Rotor knives 5 rows with 3 knives each Bedpfxjxph Ave Agkswi Stator knives 1 row with 3 knives to the front and 2 rows with 3 knives to the rear Maximum permissible speed of the drive shafts 560 rpm The cutting mill Alpine RO 40/63 with patented cross-shear rotor guarantees optimum material distribution with maximum cutting performance. The hinged screen holder allows easy removal of the screen and perfect access for cleaning the machine and replacing the blades. Ideal for industries such as recycling (for blown film, cables, plastics, etc.) and food (tea, spices, dried vegetables, etc.). Sale on behalf of customer, ex location near 72072 Tübingen, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2016, machine/vehicle number: PR01117250929, Weight: 750 kg, table size: 100x200 cm, with control unit installed in cabinet, mobile, wooden partitions, 1 worktop mat, hoses up to ball valve. Bsdpfxsyn Nivo Agkswi

Condition: used, Year of construction: 2020, machine/vehicle number: 701644, Travel paths (X/Y/Z): approx. 2,000 x 1,000 x 150 mm, clamping table surface (X/Y): approx. 2,100 x 1,050 mm, equipped with HEIDENHAIN TNC620 touch control, 1 cooling unit, 1 workstation mat, hoses up to ball valve (collection by arrangement, until end of March) Bwodpfxoyn Nipo Agkei

Condition: good (used), Year of construction: 2001, functionality: fully functional, spindle speed (min.): 5,000 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, Equipment: rotational speed infinitely variable,

Condition: used, No. 10026 Cutting mill Pallmann PS 4-5 Used According to our customer, the machine is fully functional and can be inspected on site Motor power 18.5 kW Rotor diameter 400 mm Rotor width 500 mm Bwedpfx Agexph Ewskei Rotor knives 4x 2 single knives Stator knives 4x 2 single knives Maximum permissible speed of the drive shafts 640 rpm Sale on behalf of customer, ex location near 72072 Tübingen, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1760x1150x1320 mm Weight 1100 kg Bwodpfx Agsv A Hykeksi Total power requirement 4,5 kw

Condition: good (used), Slotted disks, window milling tools, indexable inserts, window construction tools Bwsdpfxjb A Rg So Agkei -Slit discs, milling tool for: wooden windows -EXACTLY -Take: Ø 50 mm -1x pallet tool -different sizes -Weight including pallet: 346 kg

Condition: excellent (used), Year of construction: 2011, DRLTS 3000 x 2500 Table dimensions (L x W): 3,000 x 2,500 mm Overall dimensions (L x W x H): 6,374 x 2,500 x 1,200 mm Payload: 60,000 kg Motor speed linear unit: 2,500 rpm Power consumption: 35 kW Year of manufacture: 2011 Bjdpfx Agjyqwxdokowi Weight: 26,000 kg