Used Portal Cnc Machine for sale (66,355)

Condition: ready for operation (used), CNC Floor TYPE BORING MACHINE MAKE PAMA MOD. AC125M X4000 Y 2000 Z800 Rotry table 2200x1800 Table long travel 1750 Rcodpfe Adp Ndox Airjh Load on table 12 ton. Indexing of table 360000 degrees Spindle 125 ISO 50 3 speed 4-138 12-416 26-1250 CNC ECS 02 nos floor plates 4000x2000

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer. Table size: 2 x 1000 x 450 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1100 mm Y-axis: 500 mm Z-axis: 640 mm Spindle speed range: 50 – 10,000 rpm Table load: 600 kg Feed rate range, X/Y/Z, stepless: -10,000 mm/min Rapid traverse in all axes: 30 m/min Drive power: 18.5 kW Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm Weight: approx. 6700 kg Rjdpfjd I R E Nox Airech Accessories / Special features: • CNC control system SIEMENS 840 D • Dual pallet changer • 30-tool automatic tool changer • Full enclosure with safety doors, electrically secured • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions • Ball screws in all 3 axes • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Chip conveyor with integrated coolant system • 4th axis pre-configured • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2013, machine/vehicle number: 20130207F, with measuring table, dimensions: 6000 x 3000 mm, table plate weight: approx. 13,500 kg, measuring probe, manufacturer: RENISHAW. Rcodpfo Af Nivsx Airsh

Condition: used, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Year of manufacture: 2014 Colour: Grey Empty weight: 6.600 kg - Year: 2014 - Documentation available: Yes - CE marking present: Yes - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: Rods Af Uu Ujpfx Airsch - - Number of controlled axes [pcs.]: 5 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - - C-axis present: Yes - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 3 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 24 - System/software: Xilog plus - Safety feature: Door interlock switches, Safety light curtain, Bumper guard, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 300 - └ Connection diameter [mm]: 70 - └ Oil free: Yes - Tools included: Yes - CNC options: Offcut conveyor, Manual control - Table length [mm]: 5200 - Table width [mm]: 1300 - Working range X [mm]: 6350 - Working range Y [mm]: 1300 - Z-axis working range [mm]: 200 - X-axis maximum stroke [mm]: 7033 - Y-axis maximum stroke [mm]: 1940 - Z-axis maximum stroke [mm]: 475 - Voltage [V]: 400 - Current consumption [A]: 64 - Installed length [mm]: 11000 - Installed width [mm]: 3900 - Installed height [mm]: 3000 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2009, machine/vehicle number: 19727, with CNC control, manufactured by HEIDENHAIN, type: ITNC 530, travel ranges: X-axis: 800 mm, Y-axis: 600 mm, Z-axis: 500 mm, with automatic tool changer with 30 tool positions, with coolant system, chip conveyor, manufactured by KNOLL, type: 340 K-1, machine weight: 7000 kg. Rede Af Nlxspfx Airjch

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 16,275 h, Control SINUMERIK 840D SL Laser source TruDisk 3001 Laser power 3,000 W (3 kW) X-axis travel 3,000 mm Y-axis travel 1,500 mm Z-axis travel 115 mm Max. axis speed X / Y / Z 100 / 100 / 100 m/min Max. simultaneous speed X-Y 245 m/min Max. sheet thickness – mild steel 20 mm Max. sheet thickness – stainless steel 15 mm Max. sheet thickness – aluminum 15 mm Max. sheet thickness – copper 4 mm Rcsdpfx Aj Af U Hqsiroh Max. workpiece weight 900 kg Transport width 2,980 mm Machine weight 12,000 kg Connected electrical load 37 kVA Compressed air 6 bar Dimensions (L × W × H) 9,400 × 5,100 × 2 400 mm Accessories, Standard Equipment • Automatic pallet changer • Enclosed work area • Chiller unit (or Cooling unit) • Integrated electrical cabinet (or Control cabinet) • Conveyor belt • Work area lighting • Positioning laser diode • Spraying device • FocusLine • NitroLine • PlasmaLine • Automatic nozzle cleaning • Cutting head and adaptive lens system • 17-inch touchscreen • FastLine • Teleservice • USB • CE marking • Light barriers (or Safety light curtains) • Monitoring system Optional Equipment • Automatic nozzle changer • Drop&Cut • Dot Matrix Code The machine is in good working order and can be seen under power after making an appointment.

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: AA1/014223, functionality: fully functional, input voltage: 400 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,970 mm, travel distance Y-axis: 1,725 mm, travel distance Z-axis: 340 mm, workpiece length (max.): 2,690 mm, workpiece width (max.): 1,240 mm, number of axes: 3, number of slots in tool magazine: 8, controller manufacturer: ESA GV - XILOS PLUS, actuation type: electric, total height: 2,897 mm, total length: 3,800 mm, total width: 2,400 mm, overall weight: 2,600 kg, table length: 2,740 mm, table width: 1,255 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, SCM Pratix 48 NST CNC machining centre for drilling and routing, year 2004, from the closure of a small, artisanal woodworking shop (no heavy industrial shift production). Machine in excellent condition, stored indoors, inspected and serviced by an official SCM technician. TECHNICAL SPECIFICATIONS: Working area: X = 2,690 mm | Y = 1,240 mm Axis travels: X = 2,970 mm | Y = 1,725 mm | Z = 340 mm Workpiece clearance: 200 mm Multifunctional grooved aluminium table with integrated vacuum channels (vacuum hole pitch 120 mm, groove pitch 40 mm) Pneumatic pop-up reference stops controlled by CNC SCM Power 2000 electrospindle 7.5 kW (10 HP), HSK 63F tool connection, rotation speed up to 18,000 RPM Automatic rear tool changer: Rapid, 8 positions F9 boring unit: 5 independent vertical spindles + 4 horizontal spindles (1+1 in X and 1+1 in Y) Upgraded 250 m³/h vacuum pump mounted on a mobile trolley CNC control unit: PC-Office running Windows XP with SCM Xilog Plus software interface INCLUDED ACCESSORIES & TOOLING: Original SCM right-angle attachment head with 2 horizontal outlets (for router bits with ER32 collet or saw blade up to Ø 160 mm), 360° manually adjustable Set of HSK 63F tool holders, ER32 clamping nuts, and service wrenches Extensive set of professional OMAS profile cutters and tooling for doors, windows, and solid wood joinery Modulset modular vacuum template clamping elements (H=20 mm) Original SCM user & maintenance manuals, electrical/pneumatic schematics, and original CE Declaration of Conformity TERMS OF SALE & DELIVERY: Delivery terms: Ex Works (EXW). Rcjdps Af Ig Uofx Airjh Dismantling, packing, loading, and transportation are entirely the buyer's responsibility and at their expense. The machine is installed and can be inspected on site under power by agreement. PLEASE NOTE: Machine fully inspected, software/hardware reset, and functionally tested by an official SCM service technician, with an official service report and complete system backup available.

Condition: like new (used), Year of construction: 2021, operating hours: 5,100 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,175 mm, controller model: Heidenhain 640 control, overall weight: 37,500 kg, spindle speed (max.): 30,000 rpm, operating hours of spindle: 5,100 h, coolant supply: 80 bar, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 120, We offer in good condition Grob G750 Gen1 from 2021 with only 5100 spindle hours. X-Axis travel: 1000 mm Y-Axis travel: 1100 mm Z-Axis travel: 1175 mm Redo Af Uxuepfx Airech With following options: HSK-A63 120 tools ATC 30.000 RPM Spindle Internal coolant 80 bar Touchprobe Heidenhain TS460 Blum Laser Kinematic quick set including LANG Vices

Condition: used, Year of construction: 2007, -no machining tools required -spindle replaced in 2018 -NUM control replaced in 2019 -machining dimension X: 5500 mm -machining dimension Y: drilling 1440 mm / milling 1780 mm -safety device: bumpers / protective grating -automatic central lubrication via CNC control -central extraction system -rear tool magazine HSK 63 with 24 positions -chip conveyor -TV-Morbidelli table with 10 supports, L=1500mm -vacuum cups, approx. 15 pcs, X=145/Y=145/H=50 mm + approx. 8 pcs, X=145/Y=55/H=50 mm -positioning aids on Morbidelli table -vacuum cup positioning via laser -vacuum pump, 250 CBM/H -drilling head speed adjustable via machine inverter -CNC control with PC office -prepared for teleservice -drilling unit with 30 spindles and 4+2 horizontal spindles -base for vacuum cup attachment to support rail Rcedpfx Ajz Ehvrjireh Location: Supplier

Condition: refurbished (used), Year of construction: 2017, functionality: limited functionality, WMW UNION CNC table-type boring mill, completely overhauled and modernized in 2017. The machine has been rarely used since then. It is currently disassembled and kept in storage. Cannot be inspected under power!!! Rjdj Af U Dvepfx Airech

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER Rjdsz Ebzhopfx Airjch KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Travel speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Vacuum pump (Opt.) m³/h 90/108 - 250/300 DRILLING UNIT Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed rpm 24000 Side tool changer 13 positions INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Rcjdpfx Aiszvhkyjrsh

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Rcodpfszvhlkex Aireh Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: new, Year of construction: 2027, functionality: fully functional, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 400 mm, workpiece weight (max.): 200 kg, spindle speed (max.): 26,000 rpm, number of slots in tool magazine: 30, CNC machines from HG GRIMME SysTech Perfect for: Highly efficient 3D milling for small workpieces – precise milling with high part output Materials: Plastics, composite materials such as CFRP / GFRP, model-making materials, aluminum Industries: Automotive, aerospace, transportation & logistics, leisure industry, sanitary, boat building, automation Availability: March 2027 Model: 5-axis CNC milling machine RT-F 1400 Spindle data: 8 kW / 6.4 Nm; 1000-36000 1/min; HSK E 40 Rodpfxo Adqr To Airoch Rapid traverse X/Y/Z: 80/80/60 Part dimensions X/Y/Z: 1000 x 800 x 400 Control system: Fanuc with IPC, handheld terminal HMOP Type B Tool changer: 12 tools Tables: 1 rotary table Vacuum system: yes Tool breakage and length monitoring: Renishaw-TS 27 R Other: Chip tray, perforated metal grid, sheet metal for extraction on the rear Year of manufacture: 2026 Condition: new

Condition: used, Year of construction: 2010, 2 CNC cylindrical grinding machines Manufacturer: Junker Type: Jumat 3000/50S Year of manufacture: 2010 Rcjdpfx Ae Agr H Rjirsh Control system: Siemens The technical specifications can be found in the attachment (images 11–13). Accessories, tools and clamping devices shown in the images are only included in the scope of delivery if this is explicitly stated in the additional information.

Condition: used, Year of construction: 2012, GENERAL FEATURES: CNC machining center with a fixed machine table and a moving tool carrier in a portal design for drilling and milling operations on panels made of various materials (chipboard, MDF, solid wood, plastic, etc.). MACHINE STRUCTURE: The base structure is a monolithic design made of thick-walled material, reinforced by welded-in parts across the entire machine bed, making it extremely stable. The table design, with a large base, ensures long-lasting precision and stability. The machine layout allows the user an optimal workflow despite a minimum of space. The mobile portal carrier is made from a solid monoblock. It is positioned in the X-direction on prismatic, ground guides using ball screw slides. On this mobile tool carrier, the working unit is in turn attached to prismatic, ground guides and the ball screw slide. Axis movement is achieved using "brushless" motors in the X/Y/Z axes. The drive system operates in the X-axis via a pre-tensioned precision rack and pinion drive, and in the Y/Z axes via ground ball screws of the highest precision class. AXIS MOVEMENT: The movement of all axes takes place on prism linear guides with a large cross-section and ball screw shoes with a large contact surface, which ensure optimal sliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving portal (X-axis) is achieved by a pinion and rack with helical teeth. Ball screws with a large cross-section ensure the accurate positioning of the working unit along the moving portal (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. STANDARD MACHINE DESIGN: Milling spindle with 5-axis positioning, 11kW (15HP), HSK63, 1200-20000 RPM. The machining unit consists of a powerful 11 kW (15 HP) motor, which is liquid-cooled and capable of 5-axis positioning. This feature enables machining operations to be performed with a tool that can be oriented in any direction; therefore, fewer angular movements are required. The base structure of the milling unit is based on a design with two non-orthogonal axes that intersect next to the tool. This feature guarantees a robust carrier for heavy-duty milling applications. Thanks to the non-orthogonal axes, it is possible to perform numerous repositionings without using too much space. This allows the machining of complex geometries without the risk of collision with the workpiece and achieves an angle of -10° in relation to the machine table. All machining operations are facilitated by the small dimensions of the group in relation to the rotation axis of the spindle: when the group is in a horizontal position, the dimension is only 35mm. WORK TABLE TV: The work table is designed to guarantee the operator maximum "freedom of movement." The vacuum quick-change clamping system provides maximum flexibility with precise positioning and optimal work piece holding. The table consists of moving consoles that are adjusted in the X-axis on ground guides with ball screw shoes and a special profile to ensure Rsdpfxozrvvvo Airoch

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 10 kg, arm reach: 1,101 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (Mate Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: AC, repeat accuracy: 0.01 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information: Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-10S is based on Fanuc LR-10iA/10 suitable for smaller machines. It consists of: 1) Robot: - Fanuc robot LR-10iA/10 6-axis vertical robot Load capacity 10 kg / reach 1101mm Mate cabinet I/O modules; DI16 / DO16 DCS Dual Check Safety Position (J567) Soft Float (J612) Touch Skip (J921) Singularity Avoidance (R792) User Socket Messaging (R648) Karel (R632) 2) Part Table: Compact but heavy part table with front entrance. Table size 980 x 700mm Three pins for quick pallet changing Reer safety light curtain, cat.4 Control button 3 LED status beacon Electrical cabinet and cables 3) Safety Options The Cage is our standard solution. All URC cells can also be delivered in the "Laser" version, which is designed for optimal accessibility. The price of the cells remains the same regardless of the chosen version. - Cage (Standard) - Omron Laser (Alternative) - Reer Light Curtain (Standard) 4) Interface to the Haas machines Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged) Communication CNC < = > URC, I/O, M-fin, safety Preparing for a Clamping device (2nd clamping device available) Preparing for a PAD Preparing for an external Air Blow 5) Gripper Configuration The Teximp Gripper Interface includes everything needed for clamping parts on the robot side. - Gripper carrier 90° Schunk Gripper JGP-P 100-2 (2 pcs) Stroke per jaw [mm] = 5 Recommended workpiece weight [kg] = 8.75 ABR-PGZN-plus 100 blanks made of aluminum for rework by the customer Sensors G1/G2 - clamped/unclamped Blower nozzle Other possibility: - Gripper carrier 180° Schunk Gripper JGZ 100-1 (2 pcs) Stroke per jaw [mm] = 10 Recommended workpiece weight [kg] = 9 Sensors G1/G2 - clamped/unclamped (4 pcs) Blower nozzle 6) Automatic Door system Our robot cell includes an Auto Door for any Haas machine, with two available solutions: the original Haas Smart CAN DC Auto Door for machines built in 2020 and later, or Teximp’s Pneumatic Auto Door for older machines. PAD-HaasVF-side PAD-HaasVF-front PAD-HaasMM-front PAD-HaasST PAD-HaasUMC Rcsdpfxs Abq Sbo Airoh - PADs for machines without the original side door/window are also available. 7) Programming Option (HMI) Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Operators can easily adjust jobs for different products/parts and then save them as "Recipes", enabling a complete robot setup change with just one click on the screen. This simplifies the programming process and minimizes downtime. - Easy visual programming - No additional hardware required Note: - We provide transport, installation, commissioning and operator training at additional cost. - You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.

Condition: used, Year of construction: 2001, machine/vehicle number: .01720, with CNC control, manufactured by FIDIA, type: C20, travel ranges: X-axis: 2400 mm, Y-axis: 2850 mm, Z-axis: 1000 mm, with automatic tool changer with 20 tool stations, with T-slot clamping plate, size: approx. 2000 x 1800 mm, coolant system. Rcsdpe Af Nlmefx Aireh

Year of construction: 2002, condition: good (used), functionality: fully functional, Technical details x-axis 2800 mm y-axis 2200 mm z-axis 800 mm control Heidenhain iTNC 530 table surface area 3000 x 1200 mm tool taper HSK-A-63 spindle turning speed range 18000 U/min power capacity 18 kW feed range 35000 mm/min total power requirement 68,7 kW dimensions of the machine ca. 12,4 x 3,5 x 4,6 m Additional information The FPT DINO is a 5-axis portal milling machine designed for the precise machining of large components. With a cross travel of 2200 mm and a high-speed spindle with 18000 rpm, this machine combines high machining volume with outstanding dynamics in finishing. Heidenhain iTNC 530 CNC path control Number of controlled axes (simultaneously): X/Y/Z/C/B Travels: Rcsdpfxo Aa Rlle Airoh X-axis (longitudinal travel) 2800 mm Y-axis (cross travel) 2200 mm Z-axis (vertical travel) 800 mm Machine length: 12,434 mm Machine width: 3,597 mm Machine height: 4,622 mm Coolant equipment (no coolant through spindle) Chip conveyor

Condition: excellent (used), For sale: a CNC rotary table from the renowned Fadal Engineering (USA) brand, model VH65. A professional 4th axis designed for machining centers, especially Fadal VMCs, but it can also be integrated with other CNC machines using a suitable controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multi-pin connector • Serial number: 4630298 Condition: used, mechanically sound, with normal signs of wear. Solid and heavy construction – ideal for precise 4-axis machining. Rjdjz Slc Sopfx Airoch

Condition: used, CNC turning machine MONFORTS Type RNC 300 MultiTurn with driven tools and Y-axis Year of manufacture 2005 CNC control FANUC Series 18i-TB Swinging diameter over bed 380 mm Spindle bore 67 mm Spindle speed 25 - 5000 rpm Tool turret 12 stations Tool holder, cylindrical VDI 30 mm Motor power, spindle drive 23 kW Total power consumption 41 kVA Mains connection 400 Volt, 50 Hz, 63 Amp. - hydrostatic guideways for the X, Y and Z axes - with tailstock, chuck and collet chuck - 3-jaw chuck SCHUNK ROTA NCD Ø 165 mm with a large number of chuck jaws - collet chuck HAINBUCH 65, without collets (only one collet as a sample) - 25 tool holders VDI 30 - 4 driven tools with collet ER 25 - chip conveyor with integrated coolant system Rcodpfx Aszfau Asirjh - approx. 20,000 operating hours Footprint of the machine with chip conveyor L x W x H approx. 4100 x 2600 x 2100 mm Footprint of the base machine L x W x H 3000 x 2400 x 2100 mm Weight approx. 6 tons very good condition

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 12 kg, arm reach: 1,441 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.02 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information: Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-12D is based on Fanuc M-10iD/12 robot arm suitable for middle size machines and specifically adapted for handling vices. It consists of: 1) Robot: - Fanuc robot M-10iD/12 6-axis vertical robot Load capacity 12 kg / reach 1441mm R-30iB Plus controller Rjdpfx Ae Af Iiwjiroch A-cabinet I/O modules; DI16 / DO16 DCS Dual Check Safety Position (J567) Soft Float (J612) Touch Skip (J921) Singularity Avoidance (R792) User Socket Messaging (R648) Karel (R632) 2) Drawer palletizing system: Usable space per one drawer: 1000 x 480mm Max 5 drawers (depends on the height of the pieces) Load capacity of one drawer: 250 kg Reer safety light curtain, cat.4 Drawer opening possible from both sides LED status beacon Electrical cabinet and cables 3) Safety Options The Cage is our standard solution. All URC cells can also be delivered in the "Laser" version, which is designed for optimal accessibility. The price of the cells remains the same regardless of the chosen version. - Cage (Standard) - Omron Laser (Alternative) - Reer Light Curtain (Standard) 4) Interface to the Haas machines Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged) Communication CNC < = > URC, I/O, M-fin, safety Preparing for a Clamping device (2nd clamping device available) Preparing for a PAD Preparing for an external Air Blow 5) Gripper Configuration The Teximp Gripper Interface includes everything needed for clamping parts on the robot side. - Gripper carrier 90° Schunk Gripper JGP-P 100-2 (2 pcs) Stroke per jaw [mm] = 5 Recommended workpiece weight [kg] = 8.75 ABR-PGZN-plus 100 blanks made of aluminum for rework by the customer Sensors G1/G2 - clamped/unclamped Blower nozzle Other possibility: - Gripper carrier 180° Schunk Gripper JGZ 100-1 (2 pcs) Stroke per jaw [mm] = 10 Recommended workpiece weight [kg] = 9 Sensors G1/G2 - clamped/unclamped (4 pcs) Blower nozzle 6) Automatic Door system Our robot cell includes an Auto Door for any Haas machine, with two available solutions: the original Haas Smart CAN DC Auto Door for machines built in 2020 and later, or Teximp’s Pneumatic Auto Door for older machines. PAD-HaasVF-side PAD-HaasVF-front PAD-HaasMM-front PAD-HaasST PAD-HaasUMC - PADs for machines without the original side door/window are also available. 7) Programming Option (HMI) Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Operators can easily adjust jobs for different products/parts and then save them as "Recipes", enabling a complete robot setup change with just one click on the screen. This simplifies the programming process and minimizes downtime. - Easy visual programming - No additional hardware required Note: - We provide transport, installation, commissioning and operator training at additional cost. - You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.

Year of construction: 2000, condition: used, Offered is a CNC die-sinking EDM machine with electrode changer. X/Y/Z axis travels: 350/250/300mm. C-axis: 360°. Control system: Charmilles CNC control. Equipped with a 4-position electrode changer (one holder defective) and various electrode holders. Low operating hours. Weight: approx. 2500kg. Inspection possible by arrangement. Redpfxj Agwqlo Airoch

Condition: used, CNC press brake WEINBRENNER, type EGP 80 Die-bending machine (DEFECTIVE) Serial No. 1257G, Year of manufacture 1991 Rsdpfoz A Ia Sox Airjch Pressing force 80 tons Working length 1300 mm Stroke 260 mm with Cybelec DNC 94 PS control system with back gauge Own weight 8800 kg without tools, tooling system probably TRUMPF Machine is not functioning, control system does not boot up. The parameters are likely lost. Weight 7300 kg (on the nameplate) Weight 8800 kg (weighed on the crane) in good condition

Year of construction: 2010, condition: excellent (used), functionality: fully functional, The Trimmer 2A is a CNC corner cleaning machine for PVC window frames, equipped with 2 interpolated axes and an automatic cycle. When properly configured, it is able to check the dimensions of the workpiece. It is fitted with a 275 mm diameter blade, which allows, through different machining programs, the cleaning of the external corner on various profiles. The Trimmer 2A also features upper and lower units with blades for cleaning the bead seams, as well as upper and lower units with knives for cleaning internal corners. Cleaning of both internal and external corners can be completed using the upper and lower drilling/milling units for cleaning the corners or the gasket seats. The processing units can be programmed independently via a CNC PC, which controls the profile programming and the machine’s operation, in either manual or automatic mode. Rcodpjw Hk T Usfx Aireh