Used Press Scrap for sale (12,547)

Condition: used, functionality: fully functional, Year of construction: 1985, control type: CNC control, Promecam press brake, fully operational. Sold with tooling. If you have any further questions, we will be happy to answer them. Pgsdpex S Iyisfx Aa Djg

Condition: good (used), functionality: fully functional, Year of construction: 1998, working width: 2,000 mm, pressing force: 35 t, pressure 35to max. bending length 2000mm arrester behind drive capacity 4,5 kW Pedpjwagykjfx Aa Dogg weight 3000kg

Condition: good (used), functionality: fully functional, Year of construction: 2011, control type: CNC control, bending force (max.): 66 t, working width: 2,040 mm, stroke length: 200 mm, distance between stands: 2,364 mm, Delem CNC control controlled arrester 1 set upper and below tools at 2m length Technische Daten / technical details: Druck / pressure 66 to Abkantlänge / bending length 2040 mm Durchgang zwischen den Ständern / distance between columns 2364 mm Hub (Y-Achse) / stroke (Y-axis) 200 mm Verfahrweg X-Achse / travel of X-axis 600 mm Verfahrweg R-Achse / travel of R-axis 150 mm Gewicht / weight 5700 kg Podpfex Tgmkox Aa Dsgg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 2004, pressing force: 200 t, power: 0.045 kW (0.06 HP), Packing press 30x30 Mercury 120 year of manufacture 2004 ready for immediate collection in 8000 Zurich, Switzerland weight: 11 tons Press is ready for use and immediately available Pgjdsttat Aspfx Aa Dog

Condition: used, Year of construction: 2024, gebraucht 2024 7319 prompt, Zwischenverkauf v Türkei 6900 € 1 120 to horizontal verschiebbar 400 mm 900 mm 1200 mm 5,8 mm/s 9.5 mm/s 1200 x 400 mm 4 kW 1900 mm 1000 mm 2450 mm 1250 kg Pgodjwiqzdopfx Aa Djg with horizontally sliding cylinder motorhydraulic with additional hand pump Height adjustable table Oil Pressure Gauge VERSION WITH HANDWHEEL AND LOCKING PIN CYLINDER ADJUSTMENT € 9.520,-- (stock no.: 7320) Option: 1 pair of V-block € 540,--

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Automatic via two-hand operation at full speed (with active light sensor fuse) Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Motor: 15kw. - 1500d/min. (IE-3) Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Table height: 850mm. (Floor to table top upper edge) ----- Hydraulics: (Hydraulic accessories on top of the press) Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Pressure adjustment via PLC. Speed adjustment via PLC. Pressure stop valve for 600 sec. Air cooler Automatic lubrication for guides Auxiliary motor Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Pivoting control panel SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Pjdpfx Aajmpfwde Degg Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Condition: ready for operation (used), Year of construction: 1991, Press force: 60 t Max. working width: 2550 mm Clear distance between uprights: 2550 mm For sheets (at full working width) up to: Throat depth: 250 mm Bending speed: 75 mm/s Return speed: 95 mm/s Backgauge adjustment: 500 mm Hydraulic drive: 380 V, 4 kW Space required: 2920 x 1350 x 2250 mm Weight: 4.7 t Pedsyda Uzjpfx Aa Dogg Control: CYBELEC

Condition: used, Letter Press Zylidner DIE Cutter Johannisberg 104 Buchdruckzylinder / Letter Press Zylidner DIE Cutter Johannisberg 104 Year 1966 - Serial-No. 2153801 Size min. 360 x 520mm - max. 720 x 1020mm Pgsdpfx Asycrz Dja Dog Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2025, neu 2025 090185 prompt, Zwischenverkauf v Polen 7950 € 153.44 € 1 47 to 110 mm 27 mm 25x18 mm 8 s 16 mm 700 bar 479 mm 135 mm 388 mm 117 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up OPTIONAL: Gantry punching station for increased productivity and operation comfort Podewirmbopfx Aa Dogg € 710,-

Condition: excellent (used), Year of construction: 2021, CATALOG NUMBER 7852 Technical specifications: - Pressing force: hydraulic Podpjx Hhzvofx Aa Degg - Briquette shape: round - Briquette diameter: 60 mm - Hopper diameter: 1000 mm - Throughput: approx. 110 kg/h - Automatic machine operation - Oil cooler - Motor: 7.5 kW - Dimensions (L/W/H): 1800x1100x1500 mm - Weight: 730 kg ADVANTAGES – Unpainted – Italian manufacture – Used briquetting machine – Original DTR + CE documentation – Perfect condition, year of manufacture 2021 Net price: 46,900 PLN Net price: 11,170 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (With significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2004, Age: 2004 Max.Size: 74 x 53 cm (29 x 20 inch) Colors: 4 Impress.Count: 68 mio Description: Man-Roland 304 Year: 2004 Imp count: 68 mil Colours: 4/0 or 2/2 Autosize Quick action plate clamp No diagonal register Technotrans aplha.d 40L Available immediately In production Pedpfx Aajttvc Re Dsgg

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 590.067, control type: manual, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: HÄMMERLE, bending force (max.): 100 t, working width: 2,100 mm, stroke length: 265 mm, throat depth: 250 mm, number of axes: 2, table height: 850 mm, type of crowning: manual, oil tank capacity: 200 l, back gauge adjustment: manual, back gauge: 600 mm, overall weight: 7,800 kg, total length: 3,200 mm, total width: 1,800 mm, total height: 2,500 mm, power: 18 kW (24.47 HP), input current: 63 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, The machine is fully functional, in working condition, with all main mechanical, hydraulic, and electrical components operating correctly. The press brake was used in industrial production and serviced regularly. Main specifications: Pgedox Tf I Hepfx Aa Djg Maximum bending force: 100 t Working length: 2,100 mm Ram stroke: 265 mm Throat depth: 250 mm Total power: 18 kW Power supply: 400/230 V, 50 Hz Machine weight: approx. 7,800 kg The press features a robust industrial design, suitable for continuous series as well as small batch sheet metal processing. Control is standard (not CNC). The back gauge is manually adjustable. Essential safety systems are included, such as emergency stop and foot pedal control. The machine is available immediately and can be inspected under power. Assistance with loading can be arranged. Documentation is available upon request.

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW Psdpfx Aajycug No Djgg clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t

Condition: excellent (used), Year of construction: 2006, Dimensin: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Pedpeycugvofx Aa Dogg Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Psdpfoycugpjx Aa Dogg Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm Podpfsycufrox Aa Djgg stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: like new (used), engine power 11 kW screw conveyor hydraulic unit mini silo production capacity from 70 to 100 kg/h briquette diameter 70 mm STULZ cooling unit ensuring stable temperature of the hydraulic system during continuous operation Pjdpfx Aaeydvytj Dsgg CE marking year of manufacture 2020

Condition: used, Year of construction: 2015, functionality: fully functional, height adjustment type: hydraulic, type of input current: three-phase, ambient temperature (min.): 5 °C, total height: 2,435 mm, total length: 1,740 mm, total width: 1,635 mm, power: 110 kW (149.56 HP), Wood Pellet PELLETIZER AMANDUS KAHL 38-780 (2015) (includes): • Amandus Kahl 38-780 pellet press Podpfox Td Daex Aa Djgg • Screw mixer • Water dosing system • Hydraulic unit • Roller lubrication system • Automatic press control system • Flat die with 6 mm holes FUEL PELLETS | 6 MM DIAMETER Manufactured from sawdust, wood chips, or lower-grade wood. This solution is ideal for companies seeking to streamline production steps and minimize disposal costs. The pellet mill features an automatic hydraulic roller gap adjustment system for precise product quality control. The machine is currently installed and connected—main electric motors and hydraulic unit can be powered up for on-site inspection. ADVANTAGES OF THE KAHL 38-780: - High Reliability: Designed for continuous, heavy-duty operation. - Long Service Life & Minimal Wear: Built for longevity and low maintenance. - Reduced Lubricant Consumption: Optimized for economical operation. - Fast and Easy Die Change: Minimizes downtime and simplifies servicing. - Compact Footprint: Saves space and enables flexible integration. - Low Noise & Vibration: Contributes to a comfortable and safe work environment. - Large Pan Grinder Chamber: Suitable for processing low bulk density materials. - Large Rollers with Low Rotational Speed: Provides gentle, uniform pelletizing. - User-Friendly Start-up: Hydraulic roller gap adjustment eases commissioning. - Vertical Product Feed: Ensures smooth and efficient material throughput. - Easy Maintenance & Remote Diagnostics: Facilitates servicing and fault analysis.

Condition: good (used), functionality: fully functional, control type: CNC control, actuation type: hydraulic, controller manufacturer: Delem, controller model: DA65, bending force (max.): 300 t, working width: 4,300 mm, stroke length: 300 mm, throat depth: 450 mm, distance between stands: 3,700 mm, number of axes: 4, type of crowning: CNC-controlled, number of support arms: 2, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Pgedpfxoydpxvo Aa Deg Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: ready for operation (used), Year of construction: 2021, General Data Machine weight 5000 kg This HRB HRB-1450F was manufactured in 2021. A robust laminating press, it handles a maximum sheet size of 1450 × 1200 mm and operates at speeds up to 6,000 sheets/hour. Powered by a 380V / 50Hz supply and weighing approximately 5,000 kg, it remains in excellent condition and is still in production. If you are looking to get high-quality laminating capabilities, consider the HRB HRB-1450F machine we have for sale. Contact us for more information. Psdpex R E Rcjfx Aa Degg Application Types Pressing / Laminating

Condition: like new (used), The MSP 120 ZK is ideally suited for crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder is composed of a hydraulic chip press paired with an upstream shredder, both perfectly matched to each other. This system enables the crushing and compaction of chips generated during turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolant lubricants (emulsion, oil) absorbed during earlier machining processes. The system consists of a feed hopper for loading the material to be processed and a shredder inside the hopper, which reduces chip length. A conveyor system moves the shredded chips continuously and stepwise via a conveyor belt into the chip press hopper. There, two augers feed the material into the compaction chamber. The system is equipped with a monitored liquid collection tank and pump, allowing coolants to be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for the monitoring of the hopper fill level. Optionally, a tipping device can be added for manual loading of the unit. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette diameter: 60 mm Productivity: 120–180 pcs/h Podpfxow R Rano Aa Dogg Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Number of knife shafts: 1 pc Motor power: 5.5 kW Number of knives: 16 pcs Exchangeable knives: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen mesh size: 20 mm Hopper inner diameter: 1,000 mm Hopper volume: 1 m³ Weight: 280 kg Power supply: 380V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured paint, RAL 7035 light grey

Condition: new, pressure: 150stroke: 300column width: 1570working speed: 5retracting speed: 10Workshop Press: Steel welded construction Any stop position Pressure gauge Safety valve against overload 2 V-prisms Height-adjustable table Table up/down device Control with operating lever Equipment according to CE regulations, operating manual in German (Sample photo) Specifications: Press force: 150 tons Pgodjd Ab Ndspfx Aa Dog Motor power: 11 kW Stroke: 300 mm Clear distance between columns: 1,570 mm Piston Ø: 280 x 200 mm Feed speed: 9 mm/s Working speed: 5 mm/s Return speed: 10 mm/s Length: 2,500 mm Width: 1,000 mm Height: 2,270 mm Weight: 2,100 kg

Condition: new, pressure: 60stroke: 250total power requirements: 4weight approx.: 800messurements (LxWxH): 1.710 x 700 x 2.100Technical DataPress force: 60 tons Motor power: 4 kW Stroke: 250 mm Clear distance between columns: 1,040 mm Piston Ø: 180 x 120 mm Feed speed: 8 mm/s Working speed: 4 mm/s Return speed: 10 mm/s Length: 1,710 mm Width: 700 mm Height: 2,100 mm Weight: 800 kg EquipmentSteel welded construction Any stop position Pgedpfx Asd Ab Iqsa Djg Pressure gauge Safety valve against overload 2 V-prisms Height-adjustable table Table up/down device Control with operating lever Manual right/left cylinder movement Equipment according to CE regulations, operating manual in German and English

Condition: as good as new (ex-display), The AHK M 1230 NC is a robust press brake from the renowned KNUTH brand, designed as a modern, cost-effective alternative to traditional CNC press brakes. This versatile machine is well-suited for operators who prefer working without complex CNC programming, featuring a user-friendly touchscreen interface for direct positioning of the back gauge along the X and R axes. The machine's high-precision steel construction and hydraulic design ensure excellent rigidity and durability, accommodating intricate bending sequences. With a pressure force of 30 tons and a bending length of 1,250 mm, it is ideal for processing various materials and contours. Noteworthy standard equipment includes the Weintek 7'' NC control, motorized back gauge, and light curtains, which enhance both safety and productivity. You can confidently order this reliable press brake online to elevate your sheet metal processing capabilities. Pgjdpsmf Tiljfx Aa Djg

Condition: good (used), Year of construction: 2007, functionality: fully functional, Pellet production line based on Italian producer Zepi pellet press, hammer mill, pellet cooler and sifter. Pgsdpfx Aevx S Ryea Djg Machines are really powerful and reliable. Some parts like hammer mill are completely refurbished. Year of production 2007.