Used Pro Center 2000 for sale (25,833)

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 2,000 kg, Column lift and rotation device, 2000 kg load capacity, with adjustable height Sideros Syncrolift positioner Double column Radio handheld remote control (wireless) Year of manufacture: 2024 Load capacity: 2000 kg Minimum working height: 1000 mm Maximum working height: 1500 mm Speed: 1 rpm Vertical adjustment: 500 mm Clamping plate diameter: 700 mm Rotational power: 1.1 kW Lifting motor: 2 x 1.1 kW Various column lift and rotation devices available: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Request a quote Pgodpfjuk Nigox Apcer

Year of construction: 2022, condition: as good as new (ex-display), 2000 kg load capacity, rotating welding table, height-adjustable Complete set Psdpfok Adhuox Apcjgr Speed continuously adjustable from 0.05 to 0.7 RPM Rotating table diameter 1200 mm Tilting angle from 0 to 120° Height adjustment from 1450 mm to 2050 mm Hand and foot remote control

Condition: new, Year of construction: 2024, table load: 2,000 kg, Welding turntable, 2000 kg load capacity with manual and foot-operated remote control Diameter 1200 mm Bore diameter 100 mm Pgedpfx Apogfqk Tjcor Height 580 mm Variable speed 0 - 0.6 RPM AC 380 V motor

Condition: used, Year of construction: 2006, FOR SALE: PROMASZ B1PK-2000 Edge Profiling & Polishing Machine PROMASZ B1PK-2000 stone edge profiling and polishing machine in working condition. The machine has been used in a professional stone fabrication workshop for processing quartz, granite and other stone materials. It is a simple and reliable solution for workshops looking for an affordable edge-processing machine. Specifications Manufacturer: PROMASZ Model: B1PK-2000 Manual operating mode Psdpfxjzcdhvj Apcjgr Processes front edge only Suitable for straight edge profiling and polishing Robust steel construction Available for inspection under power Condition Used, in working condition Regularly maintained Can be demonstrated before purchase Included Machine as shown in photos Existing tooling (to be agreed with buyer)

Condition: new, Hardened precision steel bar guided sliding aluminium table. Parallel fence with micrometric fine adjustment. Sawblade tiltable up to 45° with hand wheel. eccentric clamp, stable outrigger table for working heavy plates with degree raster Mitre fence 1400 mm with 2 end stops, integral fence 500 mm Circular saw: max sawblade diameter 315 mm spindle diameter 30 mm max. cutting width at parallelfence 850 mm max. cutting height, 90°/45° 103 mm/72 mm Pgodpfxjx H Ucto Apcjr engine power 3,8 kW S6 (3 Kw S1) dust collector inlet 120 mm length of sliding table 2000 mm Spindle moulder: spindle diameter 30 mm spindle travel 160 mm spindle speeds 8000/6000/3500/1500 engine power 3,8 kW S6 (3 Kw S1) weight 520 kg

Condition: used, functionality: fully functional, This offer is for a used ‘Ricoh Pro 8310’ black-and-white production system Item for sale: 1 x Ricoh Pro 8310 with the following specifications: Includes Vacuum Feed LCIT RT5120 Includes Finisher SR5110 Not the right configuration? We can easily configure the machine to your specifications. Please feel free to contact us! Meter readings: Total: Approx. 431,372 pages Condition: This is a used machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested for functionality A test printout can be seen in the photo Packaging and shipping: Pgedpjy Altbofx Apcer You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: new, Year of construction: 2026, Free delivery up to 150 km. Folding bench 2m incl. transport rollers "RED 160 degrees" from the company Prod-Masz to try on site and to take away. You will receive professional instruction on site. Technical data: - including cut-outs in the beams - Working length: 2060 mm - Bending capacity: up to 0.6 mm - Bending angle: max 160 degrees - Bending beam thickness: 15 mm Pedpfezbmx Uox Apcogr - Upper beam stroke: 80 mm - Weight: about 180 kg - Lifting of the upper beam in three positions Furnishing: - degree scale - angle stop - rear frame - front depth stops -Certificate CE -12 months warranty Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT Self pickup

Condition: new, Year of construction: 2026, ABKANTBANK-Technik Halver, YOUR competent partner for SHEARS AND BENDING MACHINES We are your contact for high-quality sheet metal processing. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we respond to the needs of our customers on site and see ourselves as an extension of production. Appropriate machines can be demonstrated if required, along with competent advice and professional instruction. We advise you individually - according to your wishes and look forward to your inquiry. Plate shears 2000/1.2mm - Working length 2050mm - Stable and robust construction for steel plates up to 1.2mm - Large cast work table - Open design suitable for continuous cuts - Back stop with scale - Declaration of conformity - CE mark Dimensions: Pgedpfx Ajv Nwx Repcsr Length: 2500mm Width: 750mm Height: 1150mm Weight: approx. 500 kg Clearance: 8cm Shipping within Germany 360€ All prices are subject to 19% VAT. Pick up yourself Cash on delivery Other dimensions 1000mm and 3000mm on request Contact:

Condition: used, Year of construction: 2013, 2013 SMC Group Routech Accord 30FX CNC machining center, high performance multi-function work table, 400V, 3 phase, X-axis 20' 10", Y-axis 5' 4.7", dual machining heads, rotation speed 6-18,000 RPM, onboard Rapid 12-tool changer, Rapid 16 rear tool changer, work table, pod, and rail, gantry type, has SMC Group CNC control with remote pendant control, 480V, 3 phase, Becker, model 271407, rotary vane vacuum pump, and (1) Texa, model SAW50RBSBCC000, chilling unit with transformer, winning bidder responsible for proper removal. Pgedpfexdc T Sjx Apcjr

Condition: ready for operation (used), Turning diameter over bed/cross slide: 530mm/280mm, center height: 264mm, center width: 2000mm, bed width: 370mm, speed: 2000rpm, spindle bore: 80mm, tool shank dimensions X/Y: 25mm/25mm, cross slide travel: 300mm, quill diameter: 65mm, quill stroke: 180mm, repeat accuracy: mm. The machine has an electrical problem on the tool head. Documentation available. On-site inspection is possible. Podpfx Apsv Amrtecjgr

Condition: new, Year of construction: 2026, The CORMAK PS315PRO-2000 sliding table saw with scoring unit is a solid, precise, and versatile machine designed for use in carpentry workshops, furniture manufacturing plants, and wood-based material processing facilities. Thanks to its compact 2000 mm sliding table length, heavy-duty guides, and reliable scoring system, this model performs excellently in the serial cutting of MDF, HDF, plywood, and solid wood panels. Main Advantages of the Machine Sliding table saw with scoring unit – a dual-blade system ensures chip-free cutting, even in laminated and single-sided foil-coated materials. Stable and durable construction – a robust frame, cast iron tables, and steel guides guarantee long service life and resistance to deformation. Wide adjustment range – blade tilt from 90° to 45° and adjustable main blade height allow for a wide variety of angle and depth cuts. High rotational speed – 5800 RPM of the main blade ensures clean, fast cuts without material burn marks. Dust extraction compatibility – an integrated extraction port enables efficient connection to a dust collection system. Safety and ergonomics – blade guard, rip fence with scale, and safety components increase comfort and operational safety. Construction and Technology The PS315PRO-2000 sliding table saw has been designed for maximum stability and reliability. It features a rigid steel frame base, while the main working surfaces are made of precision-ground cast iron. The main cutting blade (Ø 315 mm) works together with a scoring blade (Ø 90 mm), eliminating the risk of chipping. The machine is equipped with two separate motors, ensuring independent operation of both cutting systems. Material movement is supported by a sliding carriage with a bearing-mounted guide. Clear length and angle scales allow for quick and precise cutting parameter adjustments. Precision and Performance The CORMAK PS315PRO-2000 sliding table saw has been optimized for machining accuracy and ease of use. With rotational speeds of 5800 RPM (main blade) and 4000 RPM (scoring blade), cuts are smooth, burr-free, and minimize the need for further finishing. The adjustable blade tilt enables precise angle cuts without the need to reposition the material. Standard Equipment Main cutting blade Scoring blade 2000 mm sliding table with support Rip fence and crosscut fence Mitre guide Blade guard with dust extraction port Table extension Eccentric clamp Blade tilt angle indicator Operation manual CE Declaration of Conformity Optional Equipment Additional cutting blades Dust extraction system Technical Specifications Parameter Value Sliding table length 2000 mm Cutting width 1220 mm Blade tilt 45° Cutting height at 45° 80 mm Cutting height at 90° 100 mm Max. main blade diameter 315 mm Max. scoring blade diameter 100 mm Main blade speed 5800 RPM Scoring blade speed 4000 RPM Pgedoylxhvopfx Apcer Motor power 3.0 kW Power supply 400 V Dust extraction port 100 mm Weight 350 kg Warranty 12 months Manual included YES CE Declaration YES

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight of the machine ca. 2,5 t - high quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes Podjibw Sxopfx Apcjgr - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The basic equipment foot is available in various lengths. The load capacity of the foot is 2,000 kg.

Condition: used, Year of construction: 2025, operating hours: 21 h, Powerful low-lift pallet truck in top condition for sale! The truck is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 21 hours Year of manufacture: 2025 SCHORR Electric Platform Low-Lift Pallet Truck 2000KG / 2400MM / 24V 205Ah Powerful electric low-lift pallet truck with a 2000kg load capacity and 2400mm forks. Designed for the simultaneous transport of two Euro pallets. ✓ 2000kg load capacity ✓ 24V 205Ah Li-Ion battery ✓ Includes quick charger ✓ Fully electric & self-propelled ✓ Ideal for large warehouses ✓ Extremely robust and reliable Pallet truck with steel frame for maximum comfort and driver protection Good maneuverability thanks to power steering and compact chassis Excellent working ergonomics – height-adjustable tiller, suspended driver's platform, and padded backrest High travel speed and gradeability Powerful vertical AC drive motor Automatic speed reduction when turning Reliable drive system The electric SCHORR pallet truck features a reliable drive system with a travel speed of 10 km/h and precise steering. It impresses with powerful performance and optimal stability during operation. Long service life The vertical transmission of the pallet truck is particularly robust and ensures a long service life. Easy to use The easy-to-operate pedal ensures a high level of driving comfort. The driver has good visibility and can lean against the protected steel structure. Ensuring operational safety The pallet truck's steel protective bars ensure safe operation even at higher speeds. The electric low-lift pallet truck also features an automatic speed control function when steering. Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR20SLE (lithium battery) Load capacity: 2.0 t Model: 240E Weight including batteries: 765 kg Drive: Electric Tires: Polyurethane Basic dimensions Overall length: 2381 mm Overall width: 734 mm Fork length: 2400 mm Length including fork face: 1234 mm Stroke: 125 mm Fork dimensions DIN ISO 2331: 55 mm x 170 mm x 1150 mm Fork spacing: 685 mm Working aisle width for pallets: 1000 x 1200 crosswise 3017 mm Working aisle width for pallets: 800 x 1200 crosswise 2874 mm Turning radius: 2217mm Speed Travel speed with/without load: 8.5 km/h / 10.0 km/h Max. gradeability with/without load: 6% / 16% *Further technical data is available upon request. Psdpfx Apjwh Nzgecjgr Would you prefer to finance or lease the machine? No problem! We also offer attractive options for this. Simply contact us, and we will advise you on the various options. We look forward to hearing from you! We at SCHORR are happy to answer any questions you may have about our high-speed machines. You can reach us by phone or email. We look forward to hearing from you and assisting you with your consultation.

Condition: new, Year of construction: 2024, SCHORR electric platform pallet truck 2000KG / 2400MM / 24V 205Ah Powerful electric pallet truck with 2000kg load capacity and 2400mm forks. Designed for simultaneous transportation of 2 Euro pallets. ✓ 2000kg load capacity ✓ 24V 205Ah Li-Ion battery ✓ Quick charger included ✓ Fully electric & self-propelled ✓ Ideal for large warehouses ✓ Extremely robust and reliable Pgsdpfx Ajuuhvtjpcjr Low lift pallet truck with steel frame for maximum comfort & driver protection Good maneuverability thanks to power steering and compact chassis Excellent working ergonomics - height-adjustable tiller, spring-mounted driver's platform and padded backrest High travel speed and climbing ability Powerful vertical AC drive motor Automatic speed reduction when turning Reliable drive system The electric SCHORR low lift pallet truck has a reliable drive system with a travel speed of 10 km/h and precise control. It impresses with its powerful performance and optimum stability during operation. Long service life The vertical gearbox of the low lift pallet truck is particularly robust and guarantees a long service life. Easy handling The easy-to-operate pedal ensures a high level of driving comfort. The driver has a good view and can lean against the protected steel construction. Guaranteed operational safety The steel safety bars on the pallet truck ensure safe working even at high speeds. The electric pallet truck also has an automatic speed regulation function when steering. Technical data Manufacturer (abbreviation): SCHORR Manufacturer's code: RR20SLE ( Lithium battery) Load capacity: 2.0t Model: 240E Tare weight incl. batteries: 765kg Drive: Electric Tires: Polyurethane Basic dimensions Overall length: 2381mm Overall width: 734mm Fork length: 2400mm Length including fork crown: 1234mm Stroke: 125mm Fork dimensions DIN ISO 2331: 55mm x 170mm x 1150mm Fork outer distance: 685mm Aisle width with pallet: 1000x1200 transverse 3017mm Aisle width with pallet: 800x1200 transverse 2874mm Turning radius: 2217mm Speed Travel speed with/without load: 8.5km/h / 10.0km/h Max. Climbing ability with/without load: 6% / 16% *Further technical data available on request. Would you prefer to finance or lease the device? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any further questions you may have about our high-speed products. You can reach us by phone or email. We look forward to hearing from you and assisting you with advice.

Condition: new, table length 2000 mm table width 1000 mm table height 900 mm table load 3000 Kg Pedpjyv I Hwsfx Apcjgr weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, sheet thickness (max.): 3 mm, working length: 2,500 mm, TECHNICAL DETAILS Sheet thickness with tensile strength of 410 N/mm² max.: 2.00 mm Sheet thickness with tensile strength of 600 N/mm² max.: 1.25 mm Sheet thickness with tensile strength of 265 N/mm² max.: 3.00 mm Minimum sheet thickness: 0.50 mm Length of the notched plate at the inlet max.: 2,700 mm Width of the notched plate at the inlet max.: 1,500 mm Rotatable diagonal of the notched plate max.: 2,700 mm Bending length max.: 2,500 mm Clearance for bending above the work table max.: 127 mm Podezv Rc Sspfx Apcogr MACHINE DETAILS Processor: Intel Pentium III, 500 MHz RAM: 128 MB SDRAM Graphics memory: 4 MB SGRAM Hard disk capacity: 9.1 GB CD-ROM drive: 600 MB Floppy disk drive: 3.5 inch, 1.44 MB Network cards: 2 Screen diagonal: 17 inches Voltage: 400 V Frequency: 50 Hz Number of phases: 3 Rated power: 38 kW Rated current: 64 A Switching capacity of the main switch: 40 kA Further technical details can be found in the attached documents.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: KF0310KMB20260601, type of input current: three-phase, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, space requirement length: 6,200 mm, space requirement height: 2,650 mm, space requirement width: 2,500 mm, controller manufacturer: Self-developed brand, workpiece length (max.): 2,500 mm, workpiece height (max.): 160 mm, nominal power (apparent): 45 kVA, number of spindles: 14, Key Product Features & Technical Parameters of KMB2500 Bending Center(Panel Bender)1. Core Product Features Bending Capacity - Fast bending: 0.2s per stroke, one-step forming Pgsdpjxu Uhvefx Apcsr - Universal dies for arc, hemming & multi-angle bending, cut mold & labor cost - Processes carbon steel, stainless steel, aluminum, film-covered sheets - Switchable edge/corner positioning for consistent precision; 3 processing modes (High Precision/Standard/Ultra-Fast) Mechanical Structure - Stress-relieved welded steel frame, higher rigidity & anti-resonance than cast frames - Press-arm feeding unit: 120m/min max feed speed, 1.9G acceleration - Hardened heavy-duty bending knives for long service life - Brush & ball worktable, auto lubrication, visual unbalanced load warning Intelligent Control - EtherCAT full closed-loop bus system, up to 64 axes, 2ms refresh, ±0.01mm accuracy - Auto angle/rotation compensation, die collision avoidance, offline simulation - IoT & cloud access, remote diagnosis & upgrade; reserved robot/production line interfaces - Simple graphic programming, low operator skill threshold Operation Merits - Full servo drive, low power consumption, low maintenance, ~55dB low noise 2. Technical Parameters -ower: 380V, average 7kW; Overall size: 6200×4500×2650mm - Max bending size: 2500×1250mm; Min thickness 0.3mm - Max thickness: 3mm steel/stainless steel, 4mm aluminum - Bend angle: -90°~90°(≤2.5mm steel), 0°~180°(≤2mm steel) - Max bend height 170mm, min arc radius 2mm - Min forming inner size customizable; Reducer backlash: 3 arcmin

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Base machine 555 - Machining dimensions for contour milling: - X = 3514 mm - Y = 1544 mm Pedpfozk N Hlex Apcogr - Maximum machining dimensions: - X = 3868 mm - Y = 1746 mm - Z = 325 mm - Workpiece support with 8 brackets, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in the X-axis and 6 in the Y-axis - available individually - T-shaped layout - max. drilling diameter 35 mm (depending on panel thickness) - Spindle extension stroke: 70 mm - Direction of rotation: alternating clockwise and anti-clockwise - n = 4725 rpm, infinitely variable - 2 horizontal drilling units in the X-direction, 1 horizontal drilling unit in the Y-direction - Sawing unit 7946: - Motor: 3.5 kW - 90° pneumatically swivelling - n = 5300 rpm - Tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm - Sawing/grooving in the X and Y directions - Milling unit 7935: - with 6 kW spindle, water-cooled - Milling unit 7982: - for lock case milling - Tool changer 7996: - 18-position magazine (turret) - Vacuum pump with a capacity of 140 m³/h - Handheld control unit - PC control system with TwinCAM WOP system - Siemens control system Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Cantilever machine (6 units) - Travel dimensions: X = 3,490 mm Y = 1,690 mm Z = 205 mm - Machining dimensions: X = 3050 mm Y = (Max. milling depth – tool radius) 1,345 mm Z = 150 mm - TF 20 drilling head - Power 2.2 kW - 8 vertical spindles, spindle spacing 32 mm in the X direction - 6 vertical spindles, spindle spacing 32 mm in the Y-axis - 2+2 horizontal spindles in the X-axis - 1+1 horizontal spindles in Y-axis - with integrated 120 mm grooving saw blade - with 9.2 kW electric milling spindle with ISO 30 mount - with C-axis - with angle unit - with 12-position tool changer - with tool change station for angle units - with vacuum pump 80–100 m³/h - Total connected load 16 kW - Compressed air 6 bar - Compressed air consumption 210 NL/m - Extraction connection 250 mm - Extraction volume 5,300 m³/h - Extraction velocity 30 m/sec Pjdpfjzk Nz Ajx Apcegr - Dimensions: 5940 x 3800 x 2510 mm - Weight: 3,700 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, Year of construction: 2014, Used Machine Year of Manufacture: 2014 Pgsdszlbp Uepfx Apcer Features and Technical Specifications: - X-axis working range: 3,740 mm - Y-axis working range: 1,570 mm - Z-axis travel: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional locking mechanism for the C-axis - Tool change stations: 24 with turret changer; 10 on the left side of the machine column - Vertical drilling spindles: 12 - Machine table: cantilever table - Automatic table positioning: available - 6 e-motion workpiece supports - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for alternating setup - With automatic central lubrication - With mobile control console featuring a PC monitor - With air conditioning for the control cabinet - With a 90 m³/h vacuum pump - With handheld control unit - Includes: 12 frame clamps, 8 large and 4 medium suction cups

Condition: used, Year of construction: 2007, Second-hand machine Year of manufacture: 2007 Pjdozk Nvgspfx Apcogr Features and technical specifications: Nesting system with grid table Machining dimensions: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Travel ranges: - X: 5665 mm - Y: 1650 mm - Z: 325 mm with milling unit 7933: - Motor 11 kW (S6) - HSK 63 - water-cooled with C-axis with 18-position disc-type tool changer with 250 m³ vacuum pump with manual control unit with central lubrication with minimum quantity lubrication system Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: Travel ranges: - X-axis: 2,685 mm – Y-axis: 1,095 mm – Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder HSK 63 F – Speed 1,000 – 18,000 rpm Pgjdpfxszk Nu No Apcsr Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles in 32 mm increments - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Groove saw in the X-direction Control system: Twin CAM 32 Vacuum pump 100 m³/h Including vacuum suction cups Dimensions: 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach

Condition: used, Year of construction: 2004, Second-hand machine Year of manufacture: 2004 Condition: Tested and in working order Features and technical specifications: Travel ranges: - X-axis: 2,685 mm – Y-axis: 1,095 mm Pgsdpozk Nmfjfx Apcer – Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder HSK 63 F – Speed 1,000 – 18,000 rpm - Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles in 32 mm increments - Horizontal drilling spindle: 1+1 - Vertical drilling spindle: 1+1 Groove saw: in the X-direction Control system: Twin CAm 32 Vacuum pump: 100 m³/h Including vacuum suction cups Dimensions 5,200 x 2,843 x 1,855 mm Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates Podpfx Aezlbpbspcjgr - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: used, Year of construction: 2019, Holz-Her Dynestic 7532 10.5 automatic CNC nesting machining center with Holz-Her Store-Master 5110 panel storage system Used machine Year of manufacture: 2019 Features and Technical Specifications: - Designed for classic nesting machining with a wear plate - Welded machine frame with ground and hardened prismatic guides for the traveling column, toolhead, and consoles - Gantry-style moving column - Rack-and-pinion drive, helical teeth, in the X and Y directions; ball screws in the Z direction for precise positioning - Machining dimensions: - Max. support area on nesting table: X = 3100 mm Y = 1560 mm - Max. travel ranges: X = 4695 mm Y = 2100 mm Z = 293 mm - Max. clearance height of DYNESTIC table Z = 100 mm from top edge of table (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Rigid, continuous machining table with grid markings - continuous slots in the X and Y directions - Slot spacing: 50 mm - Includes 25 meters of sealing cord for securing the wear plate - Vacuum fields: 1-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - individually controllable - U-shaped arrangement - 5 in the X direction and 4 in the Y direction - 32 mm pitch - max. drill bit diameter: 35 mm - Total drill length: 70 mm from the mounting end (depending on panel thickness) - Spindle extension stroke: 70 mm - Rotation direction: Alternating clockwise and counterclockwise - n(max): 1000–4400 rpm, continuously adjustable - Mounting: M10 thread – 11 mm interference fit - Tool-free, without mounting adapter - 6 horizontal spindles: - 2 double drilling spindles in the X direction - 1 double drilling spindle in the Y direction - Mounting: M 10 thread, 11 mm interference fit - Total drill length: max. 63 mm from mounting end Pgjdpfx Aezlbrpspcjr - Tool-free, without chuck - Milling unit 7842: - Power: 12.0 kW (S6) - n(max) = 1,000–24,000 rpm, continuously variable - Max. power at 12,000 rpm to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck with HSK shank - Ceramic ball bearings (hybrid bearings) - Max. tool weight: 6 kg (including holder) - Tools: Milling and grinding tools, max. Ø 160 mm - Safety guarding in accordance with CE standards - Protective fencing on the sides and rear - Vacuum pump: 500 m³/h, dry-running - Operator safety via light curtains in the front area of the machine - Handheld control unit for remote control of the machine with the following operating functions: - Start/Stop of the machining program - Speed control of the machining cycles - Reset button - Manual feed/rapid traverse for all axes - Emergency Stop - CAMPUS V7 CAD/CAM software, 1 machine license consisting of: - CAMPUS NC-HOPS: - Graphical variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic centralized lubrication - Automatic lubrication according to defined lubrication intervals - Additional dust sealing via positive pressure in each guide carriage - Simultaneous lubrication: - for all linear guides in the X, Y, and Z directions - for all ball screws in the Y and Z di...