Used Programmer for sale (1,589)

Condition: good (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, total width: 2,400 mm, The Lamina Gluer is a manually fed, in-line folding, gluing, and taping machine. Thanks to its smart design, it can handle different sizes and materials. Tool-free setup enables quick changeovers, even for short production runs. Optional machine features include cold glue, rear support unit, working station, tape applicator, and more. The Lamina Gluer is a straight-in-line gluing machine built on a robust frame made of extruded, anodized aluminum profiles. The machine offers manual feeding as standard, with an optional automatic feeder for die-cut, creased, and slotted materials. The operator positions the blanks, and the hot melt unit applies adhesive as the material passes through the machine. Glue line length and exact position can be pre-set using a programmable logic controller (PLC) and a touchscreen interface. A system of pressure rollers ensures perfect adhesion and guides glued blanks onto a pull-out tray, which is easily adjustable for various sizes. The machine comes equipped with adjustable and interchangeable side guides, enabling efficient gluing of 2-piece boxes. The Lamina Gluer is supplied ready for connection to electric and pneumatic systems. Itedpfexwcwwox Abced The Lamina Working Station is an additional option for the Lamina Gluer. Products are fed through the Gluer, which applies pre-programmed glue lines, and continue into the Working Station, where they are positioned on vacuum belts. A second piece is mounted and positioned using side lays and pneumatic stops for high-quality finishing. The unit can be adjusted for a wide range of products, from single- to multi-part displays and boxes, large back supports, shelves, and more. Transport The material is conveyed by four vacuum belts that bring the sheets to a stop bar for subsequent operations. The vacuum is generated by a fan that secures the sheets for optimal handling and precise registration. During production, the operator has full access above the sheets for additional mounting, thanks to the vacuum belt design. Pressure Rollers Material passes through two pressure rollers at the machine’s end for optimal adhesion. Registration Registration accuracy is +/- 1 mm and is achieved by a combination of photocell sensors and pusher guides. The operator uses a side lay guide to simplify the mounting process at the station.

Condition: used, mileage: 60 km, power: 77 kW (104.69 HP), first registration: 04/2023, fuel type: diesel, overall weight: 3,140 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,981 mm, total width: 2,059 mm, total height: 2,494 mm, loading space length: 3,350 mm, loading space width: 1,784 mm, loading space height: 1,886 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 89419 Itsdpfx Aboyn Ub Rscsd Errors and prior sale excepted!----SPECIAL EQUIPMENT * Seat Package 15: Driver’s seat, 4-way adjustable - Double passenger seat with storage compartment under individually folding seat cushions - Height-adjustable headrests - Integrated tray in the double passenger seat (fold-out) - Seat heating for driver and passenger - Inner armrest for driver - Manual lumbar support (driver’s seat) - Seat upholstery: fabric OTHER EQUIPMENT * 1 Battery * Driver’s side airbag * Anti-lock braking system with electronic brake-force distribution incl. ESP with traction control - Hill start assist - Side wind assist - Emergency brake assist - Rollover protection - Emergency brake support incl. emergency braking light * Battery runtime, programmable battery runtime up to 10 min * On-board computer with consumption and mileage info (e.g., remaining range) and outside temperature display, as well as Ford ECO-Mode * Double-wing rear doors with 180° opening angle (without windows) * Power windows in front - with quick-down/up function for the driver’s side * Ford Easy Fuel * High-performance alternator * Lockable glove compartment with cover * Interior lighting with delay, including front reading lights * Front air conditioning including dust and pollen filter * Fuel tank 70 l * Cargo area lighting * Steering wheel: synthetic leather * Steering column adjustable for height and reach * MyKey key system - individually programmable second key * Emergency call assistant * Technology Package 9 - Heated windscreen - Rain sensor wipers - Park pilot system front and rear - Active emergency brake assist (camera-based) - Lane keeping assist with driver fatigue alert and high beam assist, also with lane departure warning - Headlight assistant with day/night sensor - Cruise control - Fog lights - Ford audio system * Particulate filter: diesel particulate filter * Wheels: hubcaps * Wheels: tire repair kit * Wheels: steel rims 6.5 J x 15 * Low-beam headlights: halogen headlights with daytime running lights * Sliding door entry light activates automatically when opened * Sliding door, right * Rear mud flaps * Side protective strips * Power steering * Seat belts - front seatbelt tensioners and force limiters * Start-stop system * Rear bumper with integrated step * Partition (plastic) at B-pillar height * Recirculation control * Lashing eyes * Immobilizer * Heat-insulating, lightly tinted glazing * Central locking with remote control * Second key with remote control * Overhead storage compartment in front ...and much more.----Single owner. German specification. Errors and prior sale excepted. 2 years factory warranty from first registration (extendable on request). We gladly accept your vehicle as trade-in. Financing/leasing is possible with no down payment! Any further questions? We are happy to advise you! Despite ongoing checks, discrepancies between this vehicle and the above description cannot be ruled out, so we point out that the above vehicle description serves solely for general identification of the vehicle and does not constitute a warranty in the legal sense of sales law. Only the agreements in the order confirmation or purchase contract are binding. The exact equipment list can be obtained from our sales staff. Please feel free to contact us.

Condition: used, Year of construction: 1993, POLAR 115 EM-MON AUTOTRIM • Airtable • Side tables (air) • Light barrier • Programmable Itedjytb A Sjpfx Abcod • Jogger – RAB2 • Lift – L600-3 • Three extra spare knives • In production • Available: 05/2026

Condition: new, functionality: fully functional, input voltage: 400 V, tool diameter: 50 mm, spindle mount: MK 4, actuation type: electric, rotational speed (max.): 2,200 rpm, rotational speed (min.): 55 rpm, table width: 800 mm, table length: 260 mm, overall weight: 800 kg, Equipment: CE marking, rotational speed infinitely variable, The GB 55 SK NC VARIO drill press is equipped as standard with a large cross table and a 2-axis digital readout, allowing not only drilling but also precise milling operations. The automatic spindle feed and tapping function significantly enhance the capabilities of the machine. Stepless spindle speed adjustment is available within the range of 55–2200 rpm. Thanks to its robust construction and large drilling capacity, this model is well-suited for series or industrial production. The NC version features a programmable controller for setting, among other things, drilling depth, spindle speed, and automated tapping. Drilling capacity is 50 mm, tapping up to M42. Key features: - NC version with programmable controller for setting drilling depth, spindle speed, and automatic tapping, etc. - 6-range automatic spindle feed, adjustable electromagnetically including tapping function - Rigid machine construction ensures vibration-free operation - Powerful drive motor suitable for continuous operation - 2-axis digital display for high machining accuracy - Heavy-duty base plate with T-slots and integrated coolant system - Comprehensive standard equipment - Quiet machine operation thanks to hardened and ground gears - Safety covers meet latest CE standards - Automatic tool ejector - Quick tool change enabled by the automatic ejector - Electronic indicators for drilling depth and spindle speed as standard - Stepless speed adjustment Technical Specifications: - Maximum drilling capacity: 50 mm - Drilling capacity in castings: 60 mm - Maximum tapping capacity: M42 - Drill chuck capacity: 1–13 mm / B16 - Spindle taper: MK 4 Iodpfxoytfuxe Abcstd - Spindle speed min.: 55 rpm - Spindle speed max.: 2200 rpm - Speed change: stepless (55–348/348–2200) - Drive transmission: gear - Automatic spindle feed range: 0.08 / 0.12 / 0.17 / 0.24 / 0.35 / 0.50 mm/rev - Drilling table tilt: -45° to +45° - Max. distance spindle/column: 380 mm - Max. distance spindle/table: 480 mm - Max. distance spindle/base: 1165 mm - Quill stroke: 210 mm - Column diameter: 150 mm - Table size (width): 800 mm - Table size (depth): 280 mm - Cross table travel (X x Y): 415 x 290 mm - T-slots (number, size): 14 mm - Motor power S1 100%: 3.0 kW - Voltage: 400 V - Dimensions (W x D x H): 1230 x 1240 x 2310 mm - Weight approx.: 800 kg Scope of delivery: - 2-axis ES-12H LCD digital display - Cross table - Drill chuck 1–13 mm / B16 - MK4 / B16 arbor - Reducing sleeves MK4/3, MK4/2, MK3/1 - Coolant system - Tapping mode - Electromagnetic spindle - Automatic tool ejector - LED lighting - Movable guard - Electronic indicators for drilling depth and spindle speed - Stepless spindle speed adjustment

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA HD2200 FANUC 0IT PLUS CNC LATHE MACHINE CONSTRUCTION & FEATURES ▪ 8” STANDARD CHUCK SIZE. ▪ 45° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ HARDENED & GROUND BOX GUIDEWAYS FOR HEAVY DUTY CUTTING. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET. ▪ 4,500 RPM HIGH POWER MAIN SPINDLE. ▪ 24 X 30 M/MIN RAPID TRAVERSE RATES – X & Z AXES. ▪ ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET. Swing Over the Bed Ø 550 MM Swing Over the Carriage Ø 390 MM Maximum Turning Diameter Ø 380 MM Maximum Turning Length 565 MM Bar Capacity Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” – 203 MM 10” - [254] MM Spindle Bore Ø 76 MM Spindle Speed (rpm) 4,500 RPM Motor (Max/Cont.) 18.5 / 15.0 KW Torque (Max/Cont.) 206 / 125.3 NM Spindle Type BELT Spindle Nose A2-6 FEED Travel X 215 MM Travel Z 580 MM Rapid Speed X 24 M/MIN Rapid Speed Z 30 M/MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools 12 Tool Size - OD 25 MM² Tool Size - ID Ø 40 MM Indexing Time 0.12 SEC / STEP TAILSTOCK Taper MT 4 Quill Diameter Ø 65 MM Quill Travel 80 MM Travel 513.7 MM TANK CAPACITY Coolant Tank 150 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 23 KVA Thickness of Power Cable Over 16 MM² Voltage 415V / 50Hz / 3Ph MACHINE Floor Space (L x W) 2,925 x 1,650 MM Height 1,820 MM Weight 4,100 KGS INCLUDED MACHINE OPTIONS CONVEYOR SIDE HINGED WITH CHIP BOX COOLANT GUN HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD OIL SKIMMER BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO PROGRAMMABLE TAILSTOCK IN LIEU OF STD Isdpfjx Tqppex Abcjtd STANDARD FACTORY FITTED MACHINE OPTIONS CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" TOUCH SCREEN MONITOR FOR FANUC (SMART GUIDE i) HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 150 LITRES FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) MACHINE MANUALS & OPERATOR HANDBOOKS TOOLBOX STANDARD TOOLING PACKAGE QUILL TYPE TAILSTOCK - 4MT WITH STD LIVE CENTER

Condition: new, Year of construction: 2022, functionality: fully functional, HYUNDAI-WIA HD2200Y FANUC 0IT PLUS CNC LATHE WITH Y AXIS. MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 4,000 RPM MAIN SPINDLE. ▪ 6,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET - BMT55P ▪ HARDENED & GROUND BOX GUIDEWAYS Swing Over the Bed Ø 820 MM Swing Over the Carriage Ø 650 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 610 MM Bar Capacity – Main Spindle Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” - 203 MM Spindle Bore Ø 76 MM Spindle Speed (Rpm) 4,000 RPM Motor (Max / Cont.) 18.5 / 15.0 [22.5 / 15.0] KW Torque (Max / Cont.) 206.2 / 125.4 [215.0 / 143.3] NM Spindle Type BELT Spindle Nose A2-6 Travel X 215 MM Travel Y 110 (± 55) MM Travel Z 680 MM Rapid Speed X 24 M / MIN Rapid Speed Y 10 M / MIN Rapid Speed Z 30 M / MIN HARDENED & GROUND BOX GUIDEWAYS Number of Tools 12 [24] Tool Size - OD 25 MM² Tool Size - ID Ø 20 MM Indexing Time 0.2 SEC / STEP Y-Axis Type WEDGE TYPE LIVE TOOL Motor (Max / Cont.) 5.5 / 3.7] KW Milling Tool Speed 6,000 RPM Torque (Max / Cont.) 52.5 / 26.5 NM Collet Size Ø 16 – ER25 Type BMT-55P TAILSTOCK Taper MT 4 Quill Diameter Ø 80 MM Quill Travel 120 MM Travel 680 MM TANK CAPACITY Coolant Tank 200 L Lubricating Tank 2.0 L Electric Power Supply 27 KVA Thickness of Power Cable OVER 25 MM² Voltage 415 V / 50 HZ / 3PH Floor Space (L x W) 3,380 x 1,800 MM Height 1,950 MM Weight 4,700 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CHIP - BUCKET STANDARD CHIP - CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 6.0 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE 30 KVA TRANSFORMER AND CABLE QUICK TOOL SETTER - AUTO PROGRAMMABLE TAILSTOCK IN LIEU OF STD TURRET UPGRADE - 12 STATION 24 POSITION BMT55P, LIVE TOOLS 6K RPM, 5.5 KW STANDARD FACTORY FITTED MACHINE OPTIONS SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC Iodpfox Th Nysx Abcotd HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) COOLANT TANK (SIDE TYPE) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD HYDRAULIC UNIT 35 BAR (30 LITRES) CALL LIGHT (1 COLOUR) FRONT DOOR INTERLOCK TOOLBOX STANDARD TOOLING PACKAGE QUILL TYPE TAILSTOCK WITH STD LIVE CENTER

Condition: new, Year of construction: 2022, functionality: fully functional, HYUNDAI-WIA HD3100M FANUC 0IT PLUS CNC HIGH POWER TURNING CENTRE WITH HARDENED & GROUND BOX GUIDEWAYS, HIGH SPEED SERVO TURRET, C-AXIS & DRIVEN TOOLS & 12" STD CHUCK Swing Over the Bed Ø 750 MM Swing Over the Carriage Ø 500 MM Maximum Turning Diameter Ø 420 MM Maximum Turning Length 740 MM Bar Capacity - Main Ø 102 MM MAIN SPINDLE Chuck Size Ø 12” – 305 MM Spindle Bore Ø 115 MM Spindle Speed (Rpm) 2,800 RPM Motor (Max. / Cont.) 26.0 / 18.5 KW Torque (Max. / Cont.) 1,123 / 657 NM Spindle Type BELT [GEARLESS] Spindle Nose A2-11 C-Axis Indexing 360° (0.001°) Travel X 265 MM Travel Z 830 MM Rapid Speed X 24 M / MIN Rapid Speed Z 30 M / MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools 12 Tool Size - OD 25 MM² Tool Size - ID Ø 40 MM Indexing Time 0.15 SEC / STEP LIVE TOOLS Motor (Max / Cont.) 5.5 / 3.7 KW Milling Tool Speed 5,000 RPM Torque (Max. / Cont.) 70.0 / 35.4 NM Collet Size ER32 - Ø 25 Type BMT65P QUILL TYPE TAILSTOCK [PROGRAMMABLE BUILT IN TAILSTOCK] Taper MT5 [MT4] Quill Diameter Ø 100 MM Quill Travel 120 MM Tailstock Travel 830 MM TANK CAPACITY Coolant Tank200 L Lubricating Tank 1.8 L POWER SUPPLY Electrical Power Supply 27 [30 GEARLESS] KVA Voltage 415V / 50HZ / 3PH MACHINE Floor Space (L x W) 3,885 x 1,800 MM Height 1,850 MM Itodpfx Absx Thzvecsd Weight 6,050 KGS STANDARD FEATURES SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 12 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" TOUCH SCREEN MONITOR FOR FANUC (SMART GUIDE i) HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) PART PROGRAM STORAGE - 2MB (1,000 REGISTERABLE PROGRAMS) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) COOLANT TANK (SIDE TYPE) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (30 LITRES) CALL LIGHT (1 COLOUR) TOOLBOX MAIN SPINDLE - 2,800 RPM, 26.0 / 18.5 KW, 1123 NM BELT DRIVEN TOOLING PACKAGE QUILL TYPE TAILSTOCK WITH STD LIVE CENTER 12 STATION BMT65P SERVO TURRET, LIVE TOOLS 5,000 RPM, 5.5 KW, 47.0 NM FACTORY FITTED MACHINE OPTIONS CHIP BUCKET STANDARD CHIP CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD (RATED AT 60HZ SUPPLY) BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE 30 KVA TRANSFORMER AND CABLE QUICK TOOL SETTER - MANUAL PROGRAMMABLE TAILSTOCK IN LIEU OF STDMACHINE CONSTRUCTION & FEATURES 12” STANDARD CHUCK SIZE. 30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. HARDENED & GROUND BOX GUIDEWAYS FOR HEAVY DUTY CUTTING. 12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET – BMT65P. 2,800 RPM 26.0 / 18.5 [35.0 / 25.0 GEARLESS] KW HIGH POWER MAIN SPINDLE. 24 X 30 M/MIN RAPID TRAVERSE RATES – X & Z AXES. C-AXIS MAIN SPINDLE. ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET.

Condition: new, Year of construction: 2022, functionality: fully functional, HYUNDAI-WIA HD3100L FANUC 0IT PLUS CNC LATHE MACHINE CONSTRUCTION & FEATURES 12” STANDARD CHUCK SIZE. 30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. HARDENED & GROUND BOX GUIDEWAYS FOR HEAVY DUTY CUTTING. 10 STATION HIGH SPEED RIGID SERVO TURRET. 2,800 RPM 26.0 /18.5 KW HIGH POWER MAIN SPINDLE. 24 X 30 M/MIN RAPID TRAVERSE RATES – X & Z AXES. ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET. MACHINE CAPACITIES Swing Over the Bed Ø 750 MM Swing Over the Carriage Ø 500 MM Maximum Turning Diameter Ø 500 MM Maximum Turning Length 1,300 MM Bar Capacity Ø 102 MM MAIN SPINDLE Chuck Size Ø 12” – 305 MM Spindle Bore Ø 115 MM Spindle Speed (rpm) 2,800 RPM Motor (Max/Cont.) 26.0 / 18.5 KW Torque (Max/Cont.) 1,123 / 657 NM Spindle Nose A2-11 FEED Travel X 265 MM Travel Z 1,350 MM Rapid Speed X 24 M/MIN Rapid Speed Z 30 M/MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools 10 Tool Size - OD 25 MM² Tool Size - ID Ø 50 MM Indexing Time 0.15 SEC / STEP TAILSTOCK Type QUILL TYPE TAILSTOCK [PROGRAMMABLE TAILSTOCK] Taper MT5 [MT4] Quill Diameter Ø 100 MM Quill Travel 120 MM TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 27 KVA Thickness of Power Cable Over 16 MM² Voltage 415V / 50Hz / 3Ph MACHINE Floor Space (L x W)4,405 x 1,978 MM Height 1,850 MM Weight 7,200 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR SIDE HINGED WITH CHIP BOX SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) COOLANT GUN HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO STEADY REST PREPARATION - PROGRAMMABLE CLAMPING & TRAVEL PROGRAMMABLE TAILSTOCK IN LIEU OF STD QUILL TYPE TAILSTOCK - MANUAL TYPE MT#5 100 MM DIA QUILL, 120 MM QUILL TRAV Itodpex Tiggefx Abced STANDARD FACTORY FITTED OPTIONS CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 12 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) COOLANT TANK (SIDE TYPE) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (30 LITRES) CALL LIGHT (1 COLOUR) TOOLBOX STANDARD TOOLING PACKAGE - SEE MANUFACTURER'S BROCHURE STANDARD LIVE CENTER

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA HD3100YA FANUC 0IT PLUS CNC LATHE WITH Y AXIS MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 3,500 RPM MAIN SPINDLE. ▪ 5,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET – BMT55P ▪ HARDENED & GROUND BOX GUIDE WAYS MACHINE CAPACITIES Swing Over the Bed Ø 800 MM Swing Over the Carriage Ø 670 MM Maximum Turning Diameter Ø 420 MM Maximum Turning Length 760 MM Bar Capacity – Main Spindle Ø 81 MM MAIN SPINDLE Chuck Size Ø 10” - 254 MM Spindle Bore Ø 91 MM Spindle Speed (Rpm) 3,500 RPM Motor (Max / Cont.) 26.0 / 18.5 KW Torque (Max / Cont.) 734 / 522 NM Spindle Type BELT Spindle NoseA2-8 FEED Travel X265 MM Travel Y120 (± 60) MM Travel Z830 MM Rapid Speed X24 M / MIN Rapid Speed Y10 M / MIN Rapid Speed Z30 M / MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools12 Tool Size - OD25 MM² Tool Size - IDØ 20 MM Indexing Time0.2 SEC / STEP Y-Axis Type WEDGE TYPE LIVE TOOL Motor (Max / Cont.) 5.5 / 3.7 KW Milling Tool Speed 5,000 RPM Torque (Max / Cont.) 70/0 / 35.4 NM Collet Size Ø 16 – ER25 Type BMT-65P TAIL STOCK Taper MT 5 Quill Diameter Ø 100 MM Quill Travelb120 MM Travel b830 MM Voltage 415 V / 50 HZ / 3PH Floor Space (L x W) 3,630 X 1,910 MM Height 1,960 MM Weight 6,200 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR & CHIP BOX HELICAL INTERPOLATION FUNCTION HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO MAIN SPINDLE - 3,500 RPM, 26.0 / 18.5 KW, 734 NM BELT DRIVEN PROGRAMMABLE TAILSTOCK IN LIEU OF STD QUILL FORWARD / REVERSE CONFIRMATION DEVICE QUILL TYPE TAILSTOCK - MANUAL TYPE MT#5 100 MM DIA QUILL, 120 MM QUILL TRAV STANDARD FEATURES SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 10 INCH 3 JAW HYDRAULIC CHUCK CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE HYDRAULIC CHUCK PRESSURE INTERLOCK - MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) PART PROGRAM STORAGE - 2MB SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 180 LITRES Itsdpox Thu Njfx Abcsd FULL SPLASH GUARDING SYSTEM CALL LIGHT TOOLBOX TOOLING PACKAGE QUILL TYPE TAILSTOCK 12 STATION BMT65P SERVO TURRET, LIVE TOOLS 5,000 RPM, 5.5 KW, 47.0 NM

Condition: used, mileage: 46,237 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, first registration: 09/2022, next inspection (TÜV): 01/2028, emission class: none, color: white, driver cabin: other, suspension: other, number of seats: 7, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking heater, sliding door, soot filter, traction control, * Appointment scheduling for consultation and test drive = shorter waiting times: * Time is valuable and should not be spent waiting. Therefore, we kindly ask you to arrange an appointment by phone for a consultation or test drive. * Service booklet * Non-smoker vehicle TRANSMISSION / CHASSIS * Engine 2.0 l – 110 kW TDI * 7-speed dual-clutch transmission DSG APPEARANCE * Caravelle Trendline * Factory-tinted windows * Grey bumpers * Candy White * Leather multifunction steering wheel * Headliner: comfort trim with air vents * Exterior mirror housings and door handles in black * Interior loading sill protection made of plastic * Radiator grille with chrome trim * Wheel covers LIGHT & VISIBILITY * LED main headlights with LED daytime running lights * Daytime running lights (permanently in operation while driving) * LED interior lights in the load/passenger compartment * Step lighting in the load/passenger compartment * Heated rear window with wiper * Exterior mirrors convex, left and right * LED headlights and tail lights * Red LED tail lights * Auto-dimming interior mirror * Laminated safety glass windscreen * Exterior mirrors electrically adjustable, heated and foldable ENTERTAINMENT * Digital radio reception (DAB+) * Multifunction display Plus * Bluetooth mobile phone interface * Voice control system * ECE region code for radio * Prepared for We Connect and We Connect Plus * 6 speakers: 2 tweeters, 2 woofers, 2 full-range speakers * Discover Media audio navigation system with streaming & internet (touchscreen, USB) ASSISTANCE SYSTEMS AND SAFETY * Rear view camera * Driver assistance system: front and rear parking sensors * Driver assistance system: Multi-collision brake * Driver assistance system: Hill start assist * Driver assistance system: Brake assist (HBA) * Driver assistance system: Crosswind assist * Height-adjustable head restraints front and rear * Child lock, electrically operated * Fatigue detection system * Emergency call system * Start/stop engine system * Passenger airbag deactivatable * Single-tone horn COMFORT * Climatronic automatic climate control (cab and load/passenger compartment) * Additional (hot water) heater with programmable auxiliary heating function * Seat trim/upholstery: artificial leather * Seats in load/passenger compartment: 2nd row, 3-seater bench (coil spring) * Cab seats: lumbar supports for driver and passenger seat * Cab seats: driver’s seat height adjustable * Cab seats: driver and passenger seat height adjustable * Cab seats: driver and passenger seat with front armrests * Sliding door right-hand side for load/passenger compartment * Sun visors with ticket pocket for driver and airbag label on passenger sun visor * Additional soundproofing measures in cab and passenger compartment * Enhanced internal noise insulation * Operating voltage 12V * Lockable glove compartment * Heat-insulating glazing * Isofix anchor points for child seat on rear seat * Tailgate with window * Interior release for tailgate / rear wing doors * Adjustable steering column * Tie-down points in load compartment * Rubber flooring in cab * Rubber flooring (front and rear) * Rubber flooring in load/passenger compartment * Air vents for side windows in headliner Ijdpsyi Nw Asfx Abcjtd OTHER * Low emissions according to Euro 6d emissions standard * And much more * The above specifications are given wit

Condition: used, mileage: 44,447 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, first registration: 09/2022, next inspection (TÜV): 01/2028, emission class: none, color: white, driver cabin: other, suspension: other, number of seats: 7, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, sliding door, soot filter, traction control, * Scheduled appointments for consultation and test drive = shorter waiting times: * Time is valuable, and you shouldn’t spend it waiting. Therefore, we kindly ask you to arrange your consultation or test drive appointment by phone. * Service booklet * Non-smoker TRANSMISSION / CHASSIS * Engine 2.0 L – 110 kW TDI * 7-speed DSG dual-clutch transmission APPEARANCE * Caravelle Trendline * Factory-tinted windows * Bumpers in grey * Candy White * Interior loading edge protection (plastic) * Multifunction leather steering wheel * Comfort headliner with air vents * Exterior mirror housings and door handles in black * Wheel covers LIGHTING & VISIBILITY * LED main headlights with LED daytime running lights * Daytime running lights (permanently on when driving) * Interior lighting in cargo/passenger area: LED * Interior lighting in cargo/passenger area: entry step lights * Heated rear window with wiper * Exterior mirror, convex, left * Exterior mirror, convex, right * LED headlights and taillights * LED taillights, red * Laminated windscreen * Interior rearview mirror, auto-dimming * Exterior mirrors electrically adjustable, heated, and folding ENTERTAINMENT * Digital radio reception (DAB+) * Multifunction display Plus * Voice control system * Mobile phone interface Bluetooth * Region code ECE for radio * Prepared for We Connect and We Connect Plus * 6 speakers: 2 tweeters, 2 woofers, 2 broadband speakers * Discover Media audio navigation system with streaming & internet (touchscreen, USB) ASSISTANCE SYSTEMS AND SAFETY * Rear view camera * Driver assistance system: Parking aid front and rear * Driver assistance system: Multi Collision Brake * Driver assistance system: Brake assist (HBA) * Driver assistance system: Crosswind assist * Driver assistance system: Hill hold assist * Drowsiness detection * Child safety lock, electrically operated * Front and rear adjustable head restraints * Tire pressure monitoring display * Passenger airbag deactivatable * Engine start/stop system * Emergency call system COMFORT * Climatronic automatic climate control (cab + cargo/passenger compartment) * Auxiliary water heater with programmable parking heating function * Seat upholstery: artificial leather * Seats in cargo/passenger area: second row, 3-seat bench (coil spring) * Cab seats: lumbar supports for driver and front passenger * Cab seats: height-adjustable driver’s seat * Cab seats: height-adjustable driver and passenger seats * Cab seats: driver and passenger seats with front armrests * Sliding door, cargo/passenger compartment right * Sun visors with ticket pocket on driver side and airbag label on passenger sun visor * Additional soundproofing measures in cab and passenger area Itodpfx Aeyi Nwvsbced * Enhanced interior noise insulation * Lockable glove compartment * Heat-insulating glazing * Isofix mounts for child seats on rear bench * Tailgate with window * Adjustable steering column (steering wheel) * Internal release for tailgate / rear doors * Operating voltage 12 V * Single-tone horn * Lashing eyes in cargo area * Flooring: rubber (front and rear) * Flooring in cab: rubber * Flooring in cargo/passenger area: rubber * Air vents for side windows in headliner MISCELLANEOUS * Low emissions in accordance with Euro 6d emission standard * and much more * The above information is provided without guarantee. It does not constitute an agreed quality. Errors and prior sale excepted. * Our service t

Condition: used, mileage: 227 km, power: 96 kW (130.52 HP), first registration: 02/2023, fuel type: diesel, overall weight: 3,140 kg, next inspection (TÜV): 02/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Sonderausstattung: Fahrassistenz-System: Spurhalteassistent, Fahrassistenz-System: Spurhalteassistent mit Müdigkeitserkennungs-Sensor, Fzg. ohne Bodenbelag Vinyl im Lade-/Fahrgastraum, Laderaumleuchte LED, Reifen-Reparaturkit, Verkleidung im Lade-/FG-Raum: hoch Weitere Ausstattung: Ablage im Dachhimmel Fahrerhaus, Anhänger-Stabilisierungs-Programm (TSA), Audiosystem 13: Radioempfang Digital (DAB / DAB+) mit 4" Multifunktionsdisplay, Außenspiegel elektr. verstell- und heizbar, Blinkleuchte in Außenspiegel integriert, Bordcomputer, Einstiegsleuchten, Elektr. Bremskraftverteilung (EBD), Elektron. Traktionskontrolle, Fahrassistenz-System: Berganfahr-Assistent, Fahrassistenz-System: Notbrems-Assistent, Fahrassistenz-System: Seitenwind-Assistent, FordPass Connect inkl. eCall, Heckflügeltüren (Öffnungswinkel 180 Grad), Heizung mit Umluftschaltung, Karosserie/Aufbau: Kasten Hochraum, Karosserievariante: Mittelhohes Dach, Kühlergrill mit Chromleiste, Lenksäule (Lenkrad) höhen-/längsverstellbar, Motor 2,0 Ltr. - 96 kW TDCi KAT, My Key (2. Fahrzeugschlüssel programmierbar), Parkpilotsystem vorn und hinten, Radioempfang Digital (DAB+), Radstand 3750 mm, Schadstoffarm nach Abgasnorm Euro 6d-TEMP, Schalt-/Wählhebelgriff Leder, Scheibenwischer mit Intervallschaltung, regulierbar, Schiebetür Lade-/Fahrgastraum rechts, Schmutzfänger hinten, Seitenschutzleisten, Sitz-Paket 13: Fahrersitz (4-fach verstellbar) - Beifahrerdoppelsitz, Stoff, Start/Stop-Anlage, Trend, Trittstufe hinten integriert, Verzurrösen (10), Wankneigungskontrolle (Roll Stability Control, RSC), Wärmeschutzverglasung leicht getönt, Zusatzheizung elektrisch Brand new Transit L3H2. Equipments: parking sensors front-rear, leather multifunction steering wheel, cruise control, rain and light sensor, lane keeper system, heatable windshield and mirrors, start-stop system, bluetooth speaker, covered cargo space. 5 years or 200.000 km warranty from the first registration. Ijdpfeqwbxajx Abcjtd Please call us at WhatsUp/Viber also) E-mail:

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,740 h, number of axes: 2, pressing force: 14 t, Press brake manufactured in 2019. This FEYSAMA MCCH 6/3050 features a press force of 135 tons and a bending length of 3200 mm. It includes a programmable stroke of 160 mm and a backgauge with a stroke of 800 mm. If you are looking to get high-quality bending capabilities, consider the FEYSAMA MCCH 6/3050 press brake we have for sale. Contact us for further details. • Operating hours: 2740 • Distance between uprights: 2700 mm • Throat depth: 415 mm • Max distance ram/table: 390 mm • Programmable stroke: 160 mm • Backgauge with ball screw, stroke: 800 mm • CNC control: ESTUN E21, 2-axis (controls bending dimensions and backgauge) • Condition: Very good Additional equipment • Quick clamping tool holder • Bending punch: 120 mm height, 88° angle, segmented • Multi-V die: 95 × 95 mm, V openings 10/12/16/20/25/30/48/60 mm • 2 backgauge fingers with micrometric adjustment and manual spacing • 2 adjustable front supports • Safety light curtains Itedpfx Ajyrb Sqebcsd • LED work area lighting • User manual, electrical and hydraulic diagrams Technical Specification Bending Length 3200 mm

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,171 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • High wear-resistant version • Sinter-metal check ring • CrN coating on screw and check ring • Suitable for abrasive, corrosive, and high-temperature thermoplastics • Technology level 2 – servo-controlled, dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system: • Touchscreen operation with process editor • 15-inch (38.1 cm) display • Multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) Itjdpfsyg I Ihjx Abcsd • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Hours: 9,171 Additional equipment • None included in the listing • Note: Machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 80 h, overall weight: 1,000 kg, Wood Planer manufactured in 2020. This FORMAT4 EXACT 63 features a planing width of 630 mm and a table length of 1050 mm. It offers a thickness range of 3 – 300 mm with a maximum chip removal of 10 mm. If you are looking to get high-quality planing capabilities, consider the FORMAT4 EXACT 63 machine we have for sale. Contact us for further details. • Planing width: 630 mm • Table length: 1050 mm • Thickness range: 3–300 mm • Maximum chip removal: 10 mm • Cutterblock: 4-knife system, diameter 120 mm, speed 4600 rpm, self-setting planer knives • Feed speed: stepless 5–20 m/min; feed unit with variable speed • Main motor: 10.0 kW • Electrical: 3 x 400 V, 50 Hz, duty type S6, star-delta start • Thickness height adjustment: electric with digital display • Position control: Digi Drive D1 with LED display for set/actual value; programmable positioning functions • Infeed roller: steel, spiral toothed, 630 mm • Outfeed roller: steel, 630 mm • Pressure bars: segmented at infeed; spring-loaded at outfeed • Side guiding strips on thickness table • Swiveling extraction hood • Machine weight: approx. 1000 kg • Control: conventional (non-CNC) Isdpfsylkhzjx Abcotd Additional equipment • Table extension with workpiece roller, 630 x 570 mm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 5,316 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 572 mm, number of axes: 3, This 3-axis HAAS ST-20Y was manufactured in 2014. It features a CNC lathe with C and Y-axis capabilities, a spindle speed of 4000 rpm, and a chuck size of 8 inches. Additional features include a 12-station turret, chip conveyor, and a programmable hydraulic tailstock. Ideal for precision turning operations. If you are looking to get high-quality turning capabilities consider the HAAS ST-20Y machine we have for sale. Contact us for more information about this machine. • Chuck size: 8" (210 mm) • Programmable hydraulic tailstock: MT4 • Standard program memory: 1 GB Additional equipment • Chip conveyor • Automatic tool presetter • Part catcher • USB port • 6 live tools (3 axial and 4 radial) • BOT holder and VDI holder Itjdpjx D Nzpofx Abcjd

Condition: ready for operation (used), Year of construction: 2021, clamping force: 1,600 kN, overall weight: 5,900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system Itodex D E Dyspfx Abced • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information Screw Diameter: 400 unit: 35 / 40 / 45 mm Injection Pressure (Max.): 400: 2500 / 2000 / 1580 bar Shot Weight (Max. g PS): 400: 141 / 184 / 232 g Heating Output 400: 9.7 kW | 5 zones Net Machine Weight: 400: 5900 kg

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, overall weight: 4,500 kg, number of axes: 3, This 3-axis AGIE Challenge 2 eCut wire EDM machine was manufactured in 2006. It offers precision electrical discharge machining capabilities, ideal for detailed and intricate metal work. Consider the opportunity to buy this AGIE Challenge 2 eCut wire EDM machine. Contact us for more information about this machine. Additional equipment • Wire System: Wire diameter 0.1-0.33 mm, Wire speed 60-300 mm/s, Wire tension 0-25 N, Wire spool up to 25 kg, Threading system up to 250 mm height, nozzles 1 mm and 2 mm Itsdpfx Ajx D Sb Ejbcsd Machine Benefits Technical Machine Benefits • Max workpiece dimensions (wxdxh): 750 x 550 x 250 mm • Axis travels u/v: ±70 mm • Positioning speeds: manual (x/y) 30°/100 mm, programmable (x/y) exc “a” 0. 9 m/min, cha/exc “d” 3 m/min, u/v/z 0. 6 m/min • Compressed air: Ø 7 mm, 6-8 bar, 5 m³/h, filtered, dehumidified, unlubricated • Cooling water: ≤ tune level -7°c, 20 l/min, 1. 5-3 bar Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2014, operating hours: 13,252 h, spindle speed (max.): 4,000 rpm, spindle motor power: 17,500 W, controller manufacturer: SIEMENS, controller model: 840D SL, number of axes: 2, This DMG CTX 450 V3 horizontal turning machine was manufactured in 2014. It features a Siemens 840D SL CNC control, a 12-position VDI 40 tool turret with driven tools, and a high-torque main spindle. The compact design includes side chip discharge and a heavy-duty hydraulic tailstock. Ideal for high-precision turning, it also has a bar machining capability with a maximum bar diameter of 65 mm. Contact us for more information about this machine. • Control: Siemens Sinumerik 840D SL with ShopTurn; Ergonomic SlimlinePanel; Ethernet and USB data transfer; graphical support; ProgressLine & PlanOnLight; electronic cycle-time and part-count display • Tool system: 12-position servo turret, VDI 40; 12 driven tool stations (DIN 5480 coupling); possibility to mount 6 BT toolholders on turret periphery • Measuring systems: Direct measuring systems on X and Z with air-purge protection • Spindle & workholding: Main spindle 17.5 kW / 370 Nm (40% ED), up to 4000 rpm; bar machining through spindle; max. bar diameter 65 mm; chuck with through-hole clamping mechanism • Tailstock: Heavy-duty hydraulic tailstock, programmable with two selectable feed speeds • Axes/guides: Linear guides on all axes, width 45 mm; rigid machine bed; high positioning accuracy • Footprint/chips: Compact footprint; chip discharge from the side • Lighting: Integrated LED work area lighting • Coolant: High-pressure coolant pump 12 bar; manual coolant flushing gun 5 bar Additional equipment • Chip conveyor (included) Isdpsx E Eaaefx Abcotd

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 3,400 rpm, number of axes: 4, This 4-axis HAAS ST-30Y horizontal turning machine was manufactured in 2020. It features C+Y-axis capability, a 3,400 rpm A2-6 spindle, and a 12-station BMT65 turret. The machine is equipped with an automatic tool presetter, bent-type chip conveyor, and programmable tailstock. The machine can be inspected under power and test cuts are possible upon request. Contact us for further details. • Running hours: 556 h • C+Y-axis • 3,400 rpm A2-6 spindle Iedpfxsyh Hw Io Abcetd • 12-station BMT65 turret • Programmable Tailstock Additional equipment • Bent-Type Chip Conveyor • Oil skimmer • Exhaust system • Automatic Tool Presetter (ATP) • WIFI camera • Remote Jog Handle

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 5, This 5-axis HAAS UMC-750SS vertical machining center was manufactured in 2021. Consider the opportunity to buy this HAAS UMC-750SS vertical machining center. Contact us for more information. Additional equipment • Coolant tank – 208 liters with mobile cart Ijdsx U Tizspfx Abcjtd • Programmable coolant pump (M-code controlled) // Programmable Coolant Nozzle (P-COOL) • Safe Run – crash and overload detection system • Control cabinet surge protection • Voltage fault detection module (EPFDM) • Second Home Position button • Remote Jog Handle with 2m cable (RJH-XL) • Memory lock key-switch • Rotary axis scales • Top cover Machine Benefits Technical Machine Benefits • 30+1 tool side-mount tool changer • Wireless intuitive probing system (wips) • Broken tool detection (btd) Extra Information Media display via M130 (images, videos, PDF on screen) Standard machine memory: 1 GB Control Unit 15" color LCD monitor with USB port Touchscreen control interface Ethernet interface HaasConnect remote monitoring HaasDrop wireless file transfer WiFi connectivity Controller High-speed machining (HSM) Rigid tapping Dynamic Work Offsets / Tool Center Point Control (DWO/TCPC) Macro programming, coordinate rotation & scaling

Condition: ready for operation (used), Year of construction: 2023, controller manufacturer: KUKA, controller model: smartPAD, number of axes: 6, This 6-axis KUKA KR 10 R1440-2 robot arm manufactured in 2023 features a payload capacity of 10 Kg and a range of 1440 mm. It includes a KUKA KRC4 compact control cabinet, smartPAD teaching pendant, and various interfaces for enhanced functionality. Ideal for tasks requiring precision and flexibility. If you are looking to get high-quality robotic capabilities, consider the KUKA KR 10 R1440-2 machine we have for sale. Contact us for more information about this machine. Additional equipment • Transfer gripper and support contour with integrated vacuum feedthrough • Bellows suction cup, lifting plate • Parallel gripper, terminal box Iedpex R E Stefx Abcetd • QC 90 quick-change system, pneumatic coupling • Robot 3D energy chain • Documentation in German and English Machine Benefits Qualitative Machine Benefits • Range of 1440 mm • Different transfer systems for various tasks Technical Machine Benefits • Compact plug-in control cabinet with kuka smartpad teaching pendant • Selogica programming interface in german and english • Fixed stops to limit the workspace • 4 x vacuum equipment (venturi principle) with blow-off function • 4 x 5/3 pneumatic valves with vented center position • 4 x 5/3 pneumatic valves with locked center position • 2 x eight freely programmable inputs for polishing with gripper-side sensors • Pneumatic maintenance unit with compressed air monitoring • Device interfaces for peripheral control • Payload capacity of 10 kg Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 530 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, wire diameter (max.): 0.35 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis ONA KE350 wire EDM machine was manufactured in 2002. It features X/Y/Z travels of 530 × 350 × 400 mm and U/V travels of 140 × 140 mm, supporting a maximum workpiece size of 1050 × 800 × 400 mm and weight up to 3000 kg. It includes high-precision closed diamond guides and capabilities for automatic wire threading and water temperature control. Consider the opportunity to buy this ONA KE350 wire EDM machine. Contact us for more information. • U/V axis travel: 140 × 140 mm • Maximum workpiece size (X, Y, Z): 1050 × 800 × 400 mm • Maximum workpiece weight: 3,000 kg • Taper cut angle (400 mm Z): 9° / 400 mm Itodex D D Tajpfx Abced • Maximum taper cut angle: 30° / 100 mm • Wire spool types: DIN 100, DIN 125, DIN 160, DIN 200, DIN 355 • Guide type: closed diamond, high-precision, zero backlash • Positioning resolution (X, Y, U, V): 0.001 mm • Minimum programmable increment: 0.001 mm • Wire cutter: yes • Automatic wire threading: yes Additional equipment • Water chiller / temperature control: yes • Water/sludge cleaning system: yes

Year of construction: 2020, condition: ready for operation (used), controller manufacturer: SIEMENS, total height: 1,900 mm, This LAFRANCONI LM 400 die bending machine was manufactured in 2020. It features a NC roller feeder, a max stroke rate of 350 1/min, and a material width capacity of 60 mm. The machine operates with a 20 KN center ram force and a 45 mm stroke. Powered by a 10.6 kW asynchronous spindle motor, it adjusts from 20 to 350 rpm. Dimensions are approximately 2450×1300×1900 mm. Contact us for more information about this machine. • Max stroke rate: 350 1/min • Max material width: 60 mm • Standard center ram force: 20 KN • Standard center ram stroke: 45 mm • Air pressure for pneumatic clutch: 6 BAR • External dimensions of the machine (WxHxD, without protective cabin): 2000×2000×900 mm • External dimensions of the control cabinet (WxHxD): 1000×2200×600 mm • Drive: Asynchronous main spindle motor 10.6 kW / 71.3 Nm @ 760 rpm • Reduction ratio: 1:5.09 • Clutch: Unit brake (mechanical) / clutch (pneumatic) • Power: adjustable from 20 rpm to 350 rpmMachine under power Additional equipment • NC roller feeder (feeding length freely programmable) Dimensions Machine Depth 2450 mm Itjdpfx Abox D Efqocod

Year of construction: 2007, condition: ready for operation (used), travel distance X-axis: 650 mm, controller manufacturer: SIEMENS, controller model: 840D, overall weight: 29,000 kg, number of axes: 4, This 4-axis DANOBAT HG 91-3000-B8 was manufactured in 2007. It features a CNC control system by SIEMENS 840 D, a maximum grinding length of 3,000 mm, and can handle workpieces up to 5,000 kg. The machine offers a swivel angle from -30º to +180º and a cutting speed of 45 m/s. Consider the opportunity to buy this DANOBAT HG 91-3000-B8 cylindrical grinding machine. Contact us for more information about this machine. • Center height over floor: 1,604 mm • Center height: 525 mm • Max grinding length: 3,000 mm • Max grinding diameter: 850 mm • Max workpiece weight (between centers): 5,000 kg • Total machine weight: 29,000 kgX-axis (transversal carriage) • Effective travel: 650 mm • Max programmable speed: 6,000 mm/min • Min programmable speed: 0.01 mm/min • Min programmable increment (in diameter): 0.001 mm • Motor torque: 22 N·mZ-axis (longitudinal carriage) • Max programmable speed: 6,000 mm/min • Min programmable speed: 0.01 mm/min • Min programmable increment: 0.001 mm • Motor torque: 42 N·mB8 wheelhead • Swivel angle: -30° to +180° Itsdpfeycuiwjx Abcod • Wheel dimensions: Ø760 x 80(100) x Ø304.8 mm • Cutting speed: 45 m/s • Power: 22 kWWorkhead • Spindle speed range: 10–120 rpm • Center cone: Morse 6 • Motor torque: 42 N·mHydraulic tailstock • Max taper correction: ±0.20 mm • Max center travel: 100 mm • Center cone: ASA 4Dresser • Location: Positioned on workhead and tailstock