Used Pulleys for sale (405)

Condition: used, Year of construction: 2025, New demonstration machine! List price: €4,938 net. The upper part is made of heavy-duty cast iron and features a built-in three-phase motor, 380 V, 2.2 kW, 2850 rpm; the machine is equipped with a built-in switch-plug combination; motor circuit breaker and main switch according to VDE; dimensions of the sanding belt backing: 850 x 150 mm; steel table with height adjustment via spring pressure; belt dimensions: 150 x 2280 mm; the sanding belt backing is coated with a graphite sliding layer; the machine is supplied with a set of sanding belts; additionally included in the scope of delivery is an angle and miter fence. The machine is dust-tested (GS) according to Holz-BG-Stuttgart when connected to a central dust extraction system with an air velocity of at least 20 m/s. Standard equipment: - swiveling 90-180° - motorized belt oscillation - small support table on the idler pulley - pneumatic belt tension. Technical data: Motor power: 2.2 kW, sanding belt dimensions: 150 x 2280 mm, sanding belt speed: 22 m/s, table size: 750 x 350 mm, space requirement: 1000 x 800 mm, weight: from 180 kg, dust extraction port diameter: 100. Fsdpfex Hwpvex Ap Djpn Storage location: Rieth.

Condition: good (used), V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -Diameter: 507 mm -Total width: 158 mm -Belts: 8 Fjdpfx Ajct H T Tsp Depn -V-belt width: 17 mm -Taper bushing mount: Ø 70 mm (can be replaced) -Pulley: balanced -Weight: 61 kg -other pulleys in stock

Condition: reconditioned (used), Year of construction: 2015, Used automatic hydraulic band saw for metal MEP Shark 230 nc hs 5.0 Automatic auger chip remover Blade size: 2950x27x0.9 Choice of cutting speed with inverterr: from 15-100 m/min Capacity: round 230mm, square 230x230mm Year: 2015 Possibility of cuts also in semi-automatic mode Fpedpfstva Nhjx Ap Den The machine has been fully serviced, the following parts have been replaced: all bearings, reducers, both wheels (pulleys) leaf, hard metal plates in guides, main shaft, coolant pump, two jaws, coolant pipes,yojstick, fans and other consumables.

Condition: good (used), crane block, pulley, rope pulley, steel rope pulley, rope pulley, crane, pulley block, rope pulley with pulley block, wire rope pulley block -Rope pulley: Rope pulley 1 grooved Ø 270 mm -Rope width: mm -Hole: Ø 62 mm -Quantity: 15x rope pulley available -Price: per piece -Dimensions: Ø 270 x 31 mm Fpsdpfx Aporkp Nus Don -Weight: 1.8 kg/piece

Condition: good (used), V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 3-groove pulley type SPA 140 2517 -V-belt width: 13 mm Fpsdpewagt Dofx Ap Dsn -Receptacle: cone Ø 80 - 85 mm for taper bushing 2517 -Number: 2x pulleys available -Price: per piece -Dimensions: Ø 146 x 50 mm -Weight: 2.8 kg

Condition: good (used), V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 3-groove pulley type SPA 125 2012 Fpedpfxewagw Ne Ap Dsn -V-belt width: 17 mm -Mounting: Cone Ø 70 - 65 mm for taper bushing 2012 -Number: 4x pulleys available -Price: per piece -Dimensions: Ø 131 x 50 mm -Weight: 2.2 kg

Condition: good (used), V-belt pulley, pulley -Diameter: 508 mm -Total width: 120 mm -Number of belts: 6 pieces -V-belt width: 17 mm -Hole: Ø 59 mm Fpjdpfx Aod N Rt Nsp Don -Pulley: balanced -Weight: 46 kg -other pulleys: in stock

Condition: new, color: grey, Field of application: Mining Empty weight: 32.000 kg Dimensions (LxBxH): 2200 x 310 x 430 cm Tyre size on axle rear: 225 Tyre tread remainder on axle rear: 100% - Central lubrication - Originally painted - Tool box MOBILE SAND MAKER Feeding Hopper : 10 m3 Crusher Feeding Belt Conveyor 800*9000mm VSI700 Vertical Shaft Impact Crusher 132kw Vibrating Screen 2 Decks 1600x5000mm 11 kw Feedback conveyor 600*8000mm Stockpile Conveyors 600*8000mm Mobile Chassis 2 Axles-Compacible With EU Road Regulations Automation -PLC- with Tablet and PC Controlled Industrıal Paint on 1 Layer Linings-120-140 Micron- Barriers-Ladders-Platfroms Galvanised PLANT DETAIL Production Capacity 40-60 tph 0-5mm Maximum Feeding Size 50mm Feeding Height 3.8 meters Main Configuration VSI Crusher + Vibrating Screen Total Motor Power 165 kW Electric Generator Requirement 350 kVA Weight of the plant 31 Tonnes Sizes of the plant 14(L) x 3 (W) x 4.2(L) meters Chassis Type Single chassis on wheels Production Capacity 100-150 tph Maximum Feeding Size 50mm FEEDER PROPER FOR HEAVY DUTY Dimensions : 900x4100 mm Bunker : 15 m³ Capacity : 150 to 200 tons / hour Grid Length : 1160 mm Main Body Sheet : 20 mm. Weight : 5.5 tons. Number of springs : 111 ea Type of Bypass : Flat grid type (throttle transfer) Grill casting : 16-18 mn. 1,5 cr. Type of Bunker : With flat ramp climbing Anchorage slots : pin click - fit Bypass chute : With rear additional saddle Fpsdpox D A H Esfx Ap Den 2-Model : VSI 700 -CR Max Feed : 35 mm. Hard Condition Rotor Diameter : 760 mm. / Off Std. Rotor Rotor Speed : 50-70 m / s. Drive : 132 kW / 1500 rpm. Capacity : 40-60 tons / hour 0-5 sand production at 5-32 mm feed. Total Capacity : 80-120 tons / hour Weight : 8,500 kg Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) One-sided maintenance platform with ladder. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) Vibration sensor switch Maintenance Crane Crusher Feeding Belt conveyor Rated sizes : 800 x 9000 mm Motor power : 7 kw 1500 d/d Power Transmission : Motorized Reducer Drive drum : 273 Vulcanized Rubber Coating Tail drum : Angle process over pipe Body Construction : Sheet Metal Body Rubber Tension System : SNH type sliding bedding Carrier : triplet assembly pedestal Group of turning roll : single hanger system Type of reducer : İ-MAK reducer Band rubber : 5 layers...

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 240 mm -Transport width: 750 mm -Shaft: Mounting Ø50 x 175 mm -Quantity: 1x transport roller available -Total dimensions: Ø 240 x 1100 mm -Weight: 82 kg/piece Fjdpfx Apelug Swe Dopn

Condition: used, System Hall Moulder Infeed Table (2005) with Hydraulic Drive Used moulder infeed table for sale, manufactured by System Hall AB, Sweden. It consists of a chain cross transfer conveyor and an infeed section with pneumatic hold-downs, and it feeds timber into the moulder automatically and evenly. The hydraulic motors have had their seal kits replaced. Specifications: Fpjdpfx Apoz H I R Ee Dsn Manufacturer: System Hall AB, Falkenberg, Sweden Year: 2005 (CE) Overall length: 7.5 m Height: 1.85 m Infeed section length: 2.25 m Infeed section width: 0.9 m Drive: hydraulic (separate hydraulic power unit with electric motor), SEW gear motors Pneumatic cylinders for clamping and positioning Chain cross transfer with roller chains Included: hydraulic power unit, 4 toothed pulleys.

Condition: used, functionality: fully functional, machine/vehicle number: 30242, mileage: 99,900 km, power: 338 kW (459.55 HP), first registration: 09/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, emission class: euro6c, suspension: steel-air, loading space volume: 14 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Fpsdpfx Aez Hnf Aop Dsn Further comparable vehicles available upon request. Combination sweeper/vacuum truck with water recycling system ADR equipment, engine D2676LF52, front suspension parabolic 9.5t, rear suspension air, differential lock rear axle, trailing axle steerable and liftable, hill start assist, lane keeping assist (LGS IV), disc brakes, MAN BrakeMatic, emergency braking signal (ESS), emergency brake assist (EBA2), ABS, ASR, ESP, exhaust pipe raised on the right, tires: steering axle 385/65R22.5, drive axle 315/80R22.5, tires 385/65 R 22.5 - 315/80 R 22.5, fuel tank 400 liters - 60 liters AdBlue, length/width/height 9.550/2.550/3.800 Cab: 2 seats, driver's comfort seat with air suspension, passenger seat static, central locking, cruise control, air conditioning, fine dust and pollen filter, tilting roof, speed limiter 90 km/h, TollCollect pre-equipment, digital tachograph Conti, MAN Tronic on-board computer, MAN Media Truck Advanced radio with Bluetooth and navigation, radio system, windshield, door windows and side windows tinted, electric door window lifts, sun visor, sun shield, mirrors heated and electrically adjustable, reversing camera, 2 rotating beacons on the cab roof Superstructure KROLL with water recycling: extension piston, 3-way adjustable piston with volume division water/sludge: approx. 3 m³ / 10 m³, 5 m³ / 8 m³, 7 m³ / 6 m³, filling level indicator in front of and behind the piston with internal float and external scale, hydraulically upward-opening full-size top cover with hammer head locking, lower suction connection, water treatment unit, all working functions fully automatically controlled via CAN-BUS technology (KROLL-CANMATIC), combined operation of suction and high-pressure flushing, variable water and sludge chamber, emptying by means of discharge piston, automatically operating water treatment, can be switched off, "Self-Cleaning-Control" automatic final cleaning of all components of the WRS system without operator intervention, vacuum pump CVS water ring pump VacuStar WR 2500, suction capacity 2,500 m³/h with pneumatic pressure control valve, high-pressure pump URACA P 3-45 (approx. 348 l/min at 205 bar), hose reel cassette with simultaneous telescopic boom DN 125, large HD reel swiveling by 180° for 240 m DN 25, small HD reel for 60 m / DN 13, central control panel in stainless steel housing with louvre at the rear right, second control panel mounted on swiveling HD reel, remote control, discharge apron made of aluminum, closed hose box made of aluminum on the right, open hose box made of aluminum on the left, electric winch, rope pulley, vice, storage box, LED ambient lighting, LED work lights with 20 m cable and with approx. 15 m cable extension in drum, hand washing basin, ladder, fire extinguisher, reversing camera, rotating beacon at the rear.

Condition: excellent (used), mileage: 3,647 km, power: 375 kW (509.86 HP), first registration: 10/2024, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: grey, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2024, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, parking heater, power mirror, soot filter, trailer coupling, = Additional options and equipment = - Brake booster - High beam - Speed limiter - Refrigerator - Air suspension Fpjdjyiunyopfx Ap Dsn - Particulate filter - Sun visor - Auxiliary heater - Power take-off (PTO) - Central lubrication system - Towing jaw = Further information = Transmission Transmission: I-SHIFT, 12-speed, automatic Axle configuration Brakes: Disc brakes Front axle 1: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steered; Suspension: leaf spring Front axle 2: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steered; Suspension: leaf spring Rear axle 1: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 11,500 kg; Suspension: air suspension Rear axle 2: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 11,500 kg; Suspension: air suspension Weights Unladen weight: 31,780 kg Payload: 12,220 kg Gross vehicle weight (GVW): 41,000 kg Functional Boom: telescopic Boom length: 35 m Lifting capacity: 25,000 kg Lifting height: 3,500 cm Crane: FASSI F1450R.2.8-HXP + JIB L826 + winch, year of manufacture 2025, mounted behind the cab Body manufacturer: FASSI F1450R.2.8-HXP + JIB L826 + winch CE certification: yes Condition Technical condition: very good Visual condition: very good VOLVO FH 500 8X4 WITH FASSI F1450R.2.8-HXP + JIB L826 + WINCH EURO 6 L PACKAGE 500 HP DRIVE 8X4 WHEELBASE 490 CM AIR SUSPENDED FH SLEEPER CAB WITH AIR CONDITIONING AND REFRIGERATOR I-SHIFT AUTOMATIC TRAILER COUPLING TOOLBOXES FASSI F1450R.2.8-HXP + JIB L826 + WINCH 2X OIL COOLER FOR CRANE HYDRAULICS 14X HYDRAULIC EXTENSIONS TOTAL WORKING HEIGHT 35 METERS!!! MAX. LIFTING CAPACITY AT 4.30 M = 25,000 KG MAX. LIFTING CAPACITY AT 31.5 METERS 1,465 KG CRANE CAN OPERATE IN FRONT OF THE CAB DUE TO 2X FRONT STABILIZERS 100% EXTRA CHASSIS REINFORCEMENT A TOTAL OF 6X STABILIZERS LARGE HYDRAULIC WINCH WITH ATTACHMENTS, HOOK, AND PULLEYS X-RAY INSPECTION OPEN LOAD BED L = 415 CM W = 247 CM IMMEDIATELY AVAILABLE!!! FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS AND MACHINES. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL MÓWIMY PO POLSKU РОЗМОВЛЯЄМО УКРАЇНСЬКОЮ

Condition: good (used), V-belt pulley, belt pulley, engine pulley, transmission pulley, triple pulley -V-belt pulley: 5-stage Ø 40 to 90 mm Fpodpfxow U Ty Es Ap Don -Hole: Ø 14 mm -Number: 6x pulley available -Price: per piece -Dimensions: Ø90 x 55 mm -Weight: 0.8 kg/piece

Condition: excellent (used), Year of construction: 2007, BACHOFEN Turbula T2F Shaker Mixer The mixing container is set in three-dimensional motion, subjecting the material to alternating, rhythmically pulsating movements for intensive mixing. Max. volume: container with 2 L capacity Container dimensions: approx. Ø 130 mm x 215 mm Speed is adjusted via a stepped pulley. Manufacturer: Willy A. Bachofen GmbH Year of manufacture: 2002 Fedoyc R Nyjpfx Ap Dopn Space requirement: 50 x 60 x 40 cm

Condition: refurbished (used), functionality: fully functional, - Bedeschi RS toothed crusher; - Haendle WMZ toothed crusher 412 A; - GHH 2366 WH 75/60 impact crusher; - Alfa paper shredders; Sawdust grinder, Wood chipper - Haendle HM2080 wet pan mill; - Haendle HM2080a wet pan mill - Breitenbach fine roller mill type PWF 812 800*1200, gap from 0.6 mm, roller shell thickness 95 and 105 mm, drive 90 kW, drive pulley ⌀650, motor pulley ⌀224, productivity at a gap of 0.6-0.8 mm: 40-50 t/h; - Haendle fine roller mill type Alpha WFZH8100b. Commissioned in 1996. Not in operation since 2012. Gap adjustable from 0.6 mm. New roller shells installed. Bearings replaced with the participation of Haendle specialists; - Kema roller mill 1000x800, gap 1-3 mm; - Rieter fine roller mill type GSA 1000x800, gap 1-1.5 mm; - Rieter-Werke Haendle roller mill type HW 80х80-HM, gap 0.6 mm; Fodpfxeyl Tmme Ap Djpn - Haendle mechanical roller mill type WFZ 880A, gap 0.8 mm, 42 t/h

Condition: used, Year of construction: 2001, Transnorm modular conveyor with combiner conveyor belt GF 2500-1300-1200 RA2230 Merging of two belts into one Technical data: Conveyor length (NL): 2500 mm Frame width (NB): 1300 mm, 1600 mm with motor Belt width (GuB): 1200 mm Overall height (BH): 80 mm, 430 mm with motor at the bottom, approx. 1000 mm with motor at the top Scraper height: 190 mm (without motor) Belt width/height scraper: 180 mm Support feet: optionally available Conveyor speed (v m/s): 1 Drive: SEW geared motor, R17 DT80N4 Electrical data: 50Hz V380-500, kW 0.75 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Fpedorixi Nspfx Ap Dsn Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Pulley Diameter 700mm Max sawblade width 35mm Table size 980mm x 700mm Fedpfx Apezd Uuho Dspn Max blade length 5120mm Table Tilting 0 to 35 degrees Throat capacity 600mm Max. Cutting height 350mm Adjustable rip fence 4 Hp motor and starter Weight 435kg

Condition: new, Year of construction: 2026, 750 mm RUBBER-COATED DRIVE PULLEY for SM75 belt sanders Technical specifications Fpedpjzph Tzefx Ap Den PULLEY CONTACT AREA (W x S) 195 x 76 mm INNER BORE 22 mm

Condition: good (used), V-belt pulley, pulley -Diameter: 322 mm -Total width: 185 mm -Belts: 8 Fpodpfx Apsct H Tyo Den -V-belt width: 17 mm -Hole: Ø 90 mm -Pulley: balanced -Number: 2x pulleys available -Price: per piece -Weight: 38 kg -other pulleys in stock

Condition: good (used), V-belt pulley, pulley Fsdpfx Apsct H Txe Depn -Diameter: 460 mm -Total width: 265 mm -Belts: 10 -V-belt width: 22 mm -Hole: Ø 160 mm -Quantity: 1x pulley available Price: per piece -Weight: 78 kg -other pulleys in stock

Condition: good (used), V-belt pulley, pulley -Diameter: 450 mm -Total width: 130 mm Fedpfx Apoct H Tze Depn -Belts: 6 -V-belt width: 17 mm -Hole: Ø 90 mm -Pulley: balanced -Weight: 48 kg -other pulleys in stock

Condition: used, Flat belt pulley, toothed pulley, multi-belt pulley Fsdpfx Apsffh Nzs Depn -Spare part comes: from a machining center cover type FP3A -Diameter: 80 mm -Recording: 28 mm -Dimensions: 80/80/H61 mm -Weight: 1.2 kg

Condition: used, The Stenner VH105 double bandsaw with two movable saw blocks that allow one of them to be placed behind the feed system to cut with one saw or to feed timber through the saw without sawing, both without removing the saw blade. - Manufacturer: Stenner, - Model: VHET105, - Saw pulley diameter: 1050 mm, - Saw blade width: 130 mm, - Feed speed: 10 – 80 m/min, Fedpfxjtp E Uzo Ap Dopn - Distance between saws: 5 mm, - Distance between saws max: mm: 400 mm.

Condition: used, Second-hand gang saw motor (electric motor) AEG type AM 280 SX 4 for driving frame saws in sawmill applications. The electric motor is suitable for professional use in sawmills and supports the operation of frame saw systems for woodworking. Fedpezxzcujfx Ap Depn Technical data: - Power: 75 kW - Pulley diameter: 330 mm - Pulley width: 220 mm

Condition: excellent (used), V-belt pulley, pulley -V-belt pulley: 4-groove pulley 4SPB 224 Fedepix I Rjpfx Ap Dopn -V-belt width: 17 mm -Receiver: without bore -Number: 2x pulleys available -Price: per piece -Dimensions: Ø 230 x 80 mm -Weight: 11.8 kg/pc.