Used Pvc Twin Screw Extruder for sale (10,277)

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm Njdpfxeyaqgyo Adwecl - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) - Occasionally, axis reference value setting in the control system fails - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: used, Unloading at the bottom 2 engines (2 x 37 kW) dimensions (lxwxh): ± 7.300 x 2.280 x 2.600 mm dimensions bowl (lxwxh): ± 4.500 x 2.120 x 1.350 mm Njdeycqruspfx Adwjcl suitable for steam injection (double-walled)

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Ncodpfx Aoh A Sfdsdwjl Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: used, Year of construction: 2009, Speed / U/min. intake pressure / bar weight / kg total power requirement / kW Complete compressed air system - screw compressor + refrigeration dryer (Drypoint RA 500) + 2x compressed air boilers (3,000 litres each) Make: COMPAIR Motor power: 75 kW Type: LL80 7.5A Year of manufacture: 2009 Serial no.: CD1000057200 Control system: Delcos 3100 Refrigeration dryer: Drypoint RA 500 Compressed air tank: 2x galvanised tanks, 3,000 l each - total volume 6,000 l Load hours: 79,495 This compressed air system from COMPAIR offers a powerful and efficient solution for industrial applications with high air requirements. LL80 7.5A screw compressor: The compressor with a motor output of 75 kW is robust, low-maintenance and designed for continuous use. Its modern technology ensures a stable and consistent compressed air supply even under high loads. Ideal for production facilities, workshops or other industrial areas. Delcos 3100 control unit: This intelligent control unit makes it easy to operate, monitor and adjust the compressor. It ensures optimum operation, energy efficiency and protection of the system against damage. Drypoint RA 500 refrigeration dryer: An integrated refrigeration dryer is essential for removing moisture from the air. This protects downstream machines and tools from corrosion and extends the service life of the entire system. Ncodpfx Adoud Iwzewel Compressed air tank - 2x galvanised tanks with a volume of 3,000 l each: The two robust, galvanised tanks offer a large storage capacity of 6,000 litres in total. This keeps the pressure stable and maximises performance.

Condition: used, Year of construction: 2001, turning diameter / mm turning length / mm control / total power requirement / kW weight of the machine ca. / t Njdpfx Adox Tu Sujwjcl required space / m

Condition: good (used), WEBER tube extrusion line including: Ncedpfxevryhyo Adwsl WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Compressor: Manufacturer: Kaeser Model: SM 12 Year of manufacture: 2016 Power: 7.5 kW Nedpfxowx I Rus Adwocl Operating pressure: 8 bar Refrigeration dryer: Manufacturer: Kaeser Model: ABT 12 Year of manufacture: 2016 Refrigerant: R-134a Tank: Manufacturer: BWB Behälter-Werk Year of manufacture: 2016 Max. pressure: 11 bar Capacity: 270 liters After oil and filter inspection (replaced) Technical condition: perfect! PRICE REDUCTION FROM 4950 TO 3950 EUR!!!

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: M274150, cutting length (max.): 6,100 mm, total length: 9,500 mm, total width: 1,800 mm, total height: 1,800 mm, input voltage: 400 V, rotational speed (max.): 2,800 rpm, overall weight: 3,000 kg, power: 7 kW (9.52 HP), input frequency: 50 Hz, input current: 18 A, EMMEGI TWIN ELECTRA SUN TU/6 double mitre saw Note: The item can be collected from 16.02.2026 on a date to be arranged. Ncsdpfox Uyvzox Adwol FCA D-73529 Schwäbisch Gmünd – loaded onto truck

Condition: ready for operation (used), Year of construction: 2004, controller manufacturer: SIEMENS, controller model: 840D Powerline, This DMG Gildemeister Twin 65 was manufactured in 2004. It features a Siemens 840D Powerline control, 2x Sauter revolver with 12x VDI 30 each, and a revolver 1 with Y-axis. It includes a parts pick-up device, belt filter system, coolant tank of 980L with 20/40 bar, and a bar loading magazine IRCO Profimat 65. Reach out for more information about this machine. Additional equipment • Parts pick-up device NC controlled • Belt filter system with coolant tank 980L with 20/40 bar • Bar loading magazine IRCO profimat 65 • Bar passage max. 65mm • Bar length 3000mm • Various tool holders Machine Benefits Ncedpfx Adeyaik Rewol Technical Machine Benefits • 2x sauter revolver with 12x vdi 30 each • Revolver 1 with y axis Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2019, MANUFACTURER: KAESER MODEL: DSDX245 S/N: 7260862 YEAR: 2019 POWER (kW): 132 CAPACITY (m3/min): 25.15 PRESSURE (bar): 8.5 Ncedpeycv A Sjfx Adwel

Condition: excellent (used), Year of construction: 2012, Double head saw for aluminim or PVC profiles PERTICI UNIVER 400IP, year 2012 Ncsdpfehqb T Hox Adwsl Condition: excellent - Two Ø400 mm tungsten carbide saw blades - Spray mist blade lubrication system - Maximum cut between the two heads: 3500 mm - Minimum cutting capacity between two heads at 90°: 580 mm - Minimum cutting capacity between two heads at 45°: 580 mm - Hydro-pneumatic feeding of saw blades - Two horizontal pneumatic vices - Two vertical pneumatic vices - Two intermidiate profile support

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, throat depth: 400 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), Rond materiaal: Ø 400 mm Rechthoekig: 400 x 400 mm Maximaal materiaalgewicht: 1000 kg/m Snijsnelheid: 20 tot 110 m/min Afmetingen zaagblad: 5090 x 41 x 1,3 mm Hydraulische klemming spaantransportband Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Ncsdoxpymaepfx Adwel Length of band saw: 5700 x 41 x 1.3 mm

Condition: used, all stainless steel twin shaft paddle mixer intermeshing mixer Ncsdpoyba Tlefx Adwjl useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard 18 kW

Condition: like new (used), Year of construction: 2023, operating hours: 1,246 h, functionality: fully functional, Premium screw compressor Atlas Copco GA55VSD+. 55 kW with 13 bar and 11.30 m3/min. Integrated frequency inverter. Nodpfx Adjx Ttvfjwocl Like new condition!

Year of construction: 1997, condition: used, Trough length: approx. 7.8 m Screw diameter: 400 mm Conveying capacity 4 cbm/h double-walled Nodstppp Dspfx Adwjcl with spur gear motor 4 kW

Year of construction: 1997, condition: used, Double trough pre-pressing screw Trough approx. 2,800 x 660 mm Ncedpfx Aotppmzjdwel Screw diameter approx. 370 mm 2-cylinder solids pump SP 2180-400 with distribution station and 55 kW hydraulic unit

Condition: good (used), Year of construction: 1995, shredding by 3 HARDOX-coils (spirals) diameter x length: approx. 500 x 1.700 mm opening: approx. 1.100 x 1.700 mm new base frame with steel construction Njdpfxel I Dx No Adwocl new feed-hopper 8 m³ new control cabinet incl. 7 unused spare coils

Year of construction: 2002, condition: like new (used), functionality: fully functional, L x W x H: approx. 12,1 x 3,0 x 3,25 m Volume: 55 cbm capacity: approx. 150 m³/h Nodsllvpzjpfx Adwscl 6 dosing-/discharging-screws - pair driven each 11 kW weight: approx. 15 t.,

Condition: excellent (used), Year of construction: 2017, operating hours: 61,116 h, functionality: fully functional, Atlas Copco GA200VSDFF screw compressor. 200 kW with 8.3 bar and 39.40 m³/min. Integrated dryer and frequency converter. Nsdpfx Asx Ttg Dedwecl

Condition: good (used), in total 14 pieces available 3 x SEEPEX Nemo Ncsdpfx Adjlhr Hfswjl 1 x NETZSCH NM045, GETRIEBEBAU NORD, year: 2001 2 x NETZSCH NM021BY, HANNING 0,75 kW, year: 2014 2 x ALLWEILER SEP 380.1A11P01, year: 1990/1992 2 x ALLWEILER AE1N25-ID, GETRIEBEBAU NORD 0,75 kW, year: 1996 3 x ALLWEILER AE1E550-ID, GETRIEBEBAU NORD 4 kW, year: 1996 1 x unknown brand, LEROY SOMER gearbox, 5,5 kW

Year of construction: 2019, condition: good (used), The granulation line consists of a belt conveyor, an agglomerator technologically integrated with an extruder; a two-stage, twin-screw extruder with L/D ratios of 28:1 and L/D 12/1 is equipped with a degassing system, a hydraulic screen changer and a water cutting head, a centrifuge, a vibrating feeder with a screen, pneumatic conveyors, a buffer tank, and automatic control with a control cabinet. The line is a reliable recycling equipment that is suitable for plastic films, bags, scraps (≤ 0.5 mm) and other soft PE/PP waste. It has a compact structure, an ergonomic layout of individual devices, and is characterized by smooth operation, convenient maintenance, low noise and energy consumption. The control panel is only for the line, and all the electrical parts for all the equipment in the line are equipped with international high-quality components, including Siemens low-voltage electrical appliances, Fuji inverter, Omron temperature controller, etc., which is a guarantee for the reliable operation of the production line. In addition, the control panel is also equipped with a door protection device. When the door is opened, the power will be cut off and there will be no electricity in the panel. It will make the checking and maintenance much safer, without the risk of electric shock. After closing the door, the power will be on. Feedstock Conditions: Washable PE/PP films or bags The thickness should be ≤ 0.5mm The raw materials should not contain oil, metals and other things. Environmental Conditions of the Line: No freezing point or condensation points; Temperature 0 ~ 40 ℃. Working Conditions: Electricity: 3 phase 380V, 50Hz; Installed Power: ~ 480kW; Required water supply: ~ 10 m3 / h. Year: 2019 Nsdpfx Adsvlxufswscl Model: PRP-500

Condition: used, nominal force 100 t stroke 320 mm no. of strokes 35 /min distance between columns 360 / 250 mm Ncsdpfx Aevuk N Tsdwol Distance table/ram, max. stroke up, adjustment up 500 mm table surface area 320 x 450 mm table height over floor 660 mm ram surface 250 x 280 mm spindle diameter 125 mm power capacity 3,0 kW weight 4,5 t Dimensions (WxDxH) 2,0 x 1,6 x 3,1 m only permitted for hot forming work high speed friction screw press with motor, friction screw drive as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1962, nominal force 400 t stroke 140 - 400 mm no. of strokes 24 - 36 /min distance between columns 800 / 700 mm distance table/ram, max. stroke up, adjustment up 900 mm table surface area 700 x 700 mm ram surface 630 x 630 mm Ncjdpfevuud Ujx Adwjl spindle diameter 220 mm power capacity 26,0 kW weight 18,5 t Dimensions (WxDxH) 1,85 x 2,5 x 4,3 m only permitted for warm forming work with gear drive, single impact / double impact device, impact regulation

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: CAI709141, overall weight: 500 kg, total length: 2,000 mm, total width: 1,000 mm, total height: 2,400 mm, ATLAS COPCO GA11 VSD FF screw compressor including air receiver - Operating voltage: 230 V - Frequency: 50 Hz - Compressor: 400 V - Frequency: 50 Hz - Connection: 3 kW - Max. air pressure: 12.75 bar Attention: The item must be collected definitively between 18 and 26 February 2026 on a date to be agreed upon. Nsdpfxox Tz Tfo Adwjcl FCA D-78087 Mönchweiler – loaded onto truck

Condition: excellent (used), Year of construction: 2015, operating hours: 28,915 h, functionality: fully functional, Screw compressor Kaeser CSD105, 55 kW with 8.5 bar and 10.14 m³/min. Ncedpfx Adex Tdb Sewjl