Used Pye for sale (53)

Condition: good (used), Year of construction: 1986, machine/vehicle number: 025-012-44, Offer 24088 Technical specifications approx.: - Max. press force 40 t - Max. ram stroke 500 mm - Stroke speed 0 - 6 m/min - Return stroke 0 - 27 m/min - Installation height 800 mm Predpfxowl D Ups Aahoc - Throat to ram center 360 mm - Ram clamping area 500 x 400 mm - Ram clamping pin 40 mm - Table size 700 x 500 mm - Table bore / opening 180 mm - Table height above floor 700 mm - Oil capacity approx. 300 liters - Drive 400 V / 13 kW - Space requirement approx. W 1250 x H 2950 x D 1800 mm - Weight approx. 3300 kg - With: - Two-hand operation

Condition: ready for operation (used), Nominal force: 2500kN, operating pressure: 20MPa, ram speed down/up: 210/110mm/s, ram stroke: 500mm, throat depth: 360mm, max. distance between table and ram: 800mm, rated current: 41A, control voltage: 60V, rated voltage: 380V, connected load: 20.5kW, weight: 8t. An on-site inspection is possible. Podpfx Ajxcx Aajahsrc

Condition: refurbished (used), RETROFIT complete Pressing force: 1600 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm Ram: 750 x 450 mm Throat depth: 360 mm Downward speed: 200 mm Upward speed: 125 mm Machine height: approx. 3,500 mm Weight: approx. 7,000 kg Connection: 17 kW Prjdpow S Uazefx Aahsc - a complete retrofit kit for unrestricted manual loading and unloading compliant with EC directives and CE equipment requirements, - new control cabinet with certified two-channel electronic PLC safety controller from Siemens (1512SP F or 1515F) for process control, featuring integrated control panel for the operating modes: setup with two-hand control, single stroke with two-hand control, and foot operation (only in combination with BWS); manual lever operation is no longer possible, - hydraulic safety block for monitoring the closing movement of the main cylinder, - position-monitored directional valve for the up and down movement of the ram of the main cylinder, - two-hand control device with two-channel monitoring of the two-hand synchronization at the press table (incl. 5m cable), - replacement of main and control pump motors, - replacement of seals on the main cylinder, - fine filter with contamination indicator, - the press is equipped with an electronic position measurement system (including teach-in function and display of the current ram position), eliminating the need for a mechanical cam switch. Main control panel integrated into the control cabinet (mounted on the right side of the machine): - 12" touch panel - Control buttons and switches for operating modes and drives - USB interface for data exchange - Light curtain Option: Drawing cushion

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, total height: 2,350 mm, total width: 1,000 mm, total length: 1,300 mm, pressing force: 10 t, table width: 500 mm, table length: 400 mm, operating speed: 100 mm/s, overall weight: 1,300 kg, reverse speed: 450 mm/s, ram plate width: 360 mm, ram plate length: 280 mm, clearance between the columns: 630 mm, stroke length: 400 mm, Equipment: documentation/manual, Hydraulic press PYE 10 S/1M. Year of manufacture: 1983. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 10 tons. Operating pressure: 16 MPa. Upper table: 360 x 280 mm. Prodpfx Aowb Dhnoahjc Lower table: 500 x 400 mm. Clearance: 630 mm. Ram stroke: 400 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Power requirement: 5.2 kW. Weight: 1300 kg. Height: 2350 mm, Length: 1300 mm, Width: 1000 mm. Machine in very good technical condition. Machine after complete overhaul.

Condition: used, Year of construction: 1986, pressure 160 t Podpfx Aaev Rgwxehsrc throat 360 mm stroke 500 mm feed down 200 mm/sec feed up 125 mm/sec max. distance table - ram 1000 mm table surface area 900 x 630 mm ram surface 850 x 450 mm clamping pivot 50 H7 / 85 mm total power requirement 17 kW weight of the machine ca. 7 t dimensions of the machine ca. BxTxH 1,25 x 2,2 x 3,45 m

Condition: good (used), Year of construction: 1995, For sale Hydraulic press PYE-63S The price given in the advertisement is a net price to which VAT should be added Predpfx Aajv Uxttjhsc

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Prodpfxjwp Nv Ho Aahec Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: ready for operation (used), Pressing force: 63t, operating pressure: 160bar, pressing speed downwards/upwards: 200mm/400mm/s, ram stroke: 500mm, throat depth: 360mm, max. ram table distance: 800mm, weight: approx. 4200kg. On-site inspection is possible. Psdpfx Aewaa E Hjahorc

Condition: used, pressure 160 t throat 360 mm stroke 500 mm table surface area 1250x630 mm Prsdpfx Aelp U Hgoahsc ram surface 1000x450 mm table height 1000 mm dayligth 800 mm weight of the machine ca. 8 t

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, total height: 31,500 mm, total width: 13,500 mm, total length: 17,500 mm, pressing force: 40 t, table width: 1,000 mm, table length: 500 mm, operating speed: 200 mm/s, overall weight: 3,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 380 mm, distance between stands: 800 mm, stroke length: 500 mm, power: 15 kW (20.39 HP), PYE 40 SS hydraulic press with ejector. Year of production 1975, manufacturer VEB Wema Zeulenroda (Germany). Pjdetzxtpopfx Aaherc Machine after general overhaul. Replaced piston seal. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 1000 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Upward speed 450 mm/sec. Power requirement 15 kW. Weight 3200kg. Height 3150mm, Length 1750mm, Width 1150mm. Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Condition: used, Year of construction: 1979, pressure 10 t throat 250 mm stroke 400 mm feed down 100 mm/sec Pedpfxewbizyj Aaherc feed up 450 mm/sec max. distance table - ram 630 mm total power requirement 5,2 kW weight of the machine ca. 1,3 t

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, total height: 27,500 mm, total width: 10,500 mm, total length: 16,500 mm, pressing force: 25 t, table width: 630 mm, table length: 500 mm, operating speed: 200 mm/s, overall weight: 2,400 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 360 mm, distance between stands: 800 mm, stroke length: 500 mm, power: 12.5 kW (17.00 HP), PYE 25 SS hydraulic press. Year of manufacture 1977. manufacturer VEB Wema Zeulenroda (Germany). Parameters: Maximum pressing force 25 tons. Working pressure 16 MPa. Upper table 450 x 360 mm. Podjtzxvwjpfx Aaherc Lower table 630 x 500 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Upward speed 450 mm/sec. Power requirement 12,5 kW. Weight 2400kg. Height 2750mm, length 1650mm, width 1050mm. Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Condition: used, pressure 10 t stroke 400 mm feed down 200 mm/sec feed up 450 mm/sec max. distance table - ram 630 mm Predpfxed R Szuo Aahoc total power requirement 8,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, total height: 3,050 mm, total width: 1,750 mm, total length: 1,150 mm, pressing force: 40 t, table width: 630 mm, table length: 500 mm, operating speed: 100 mm/s, overall weight: 3,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 380 mm, distance between stands: 800 mm, stroke length: 500 mm, oil tank capacity: 300 l, Equipment: documentation/manual, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Piston seal replaced. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Clearance 800 mm. Prsdpfowbt Uqox Aahsc Cylinder stroke 500 mm. Down speed 100 mm/sec. Up speed 450 mm/sec. Ejector stroke 200 mm. Ejector force 16 tons. Power demand 13 kW. Weight 3180 kg. Height 3050mm, Length 1750mm, Width 1150mm. The technical condition of the machine is very good. The machine has been overhauled. It is possible to inspect and check the machine in motion.

Condition: used, Year of construction: 1995, total height: 3,250 mm, total width: 1,200 mm, total length: 1,750 mm, Empty weight: 4.100 kg Price: On request Podpfx Aexr E Nljaherc - Year: 1995 - Documentation available: No - Serial number: - Motor power: 13.0kW - Table width: 560mm - Throat depth: 360mm - Table length: 750mm - Ram width: 400mm - Ram length: 530mm - Min. stroke: 0mm - Model: Hydraulic - Max. stroke: 500mm - Number of columns: 1 - Power: 63.0ton - Transport dimensions: 1750mm x 1200mm x 3250mm (l x w x h) - Transport weight [kg]: 4100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: good (used), functionality: fully functional, total height: 2,700 mm, pressing force: 25 t, table width: 500 mm, table length: 500 mm, overall weight: 2,000 kg, distance table to ram: 800 mm, stroke length: 500 mm, Equipment: documentation/manual, Available for sale: 1 used hydraulic press Manufacturer: VEB Werkzeugfabrik Zeulenroda WMW Model: PYE25/1 Total weight: 2 t Nominal pressing force: 25 MP Ram stroke: 500 mm Pjdpfsxfzdljx Aahjrc Maximum distance between table and ram: 800 mm Table: 500 x 500 mm Documentation included

Condition: used, functionality: fully functional, Hydraulic Press VEB Zeulenroda PYE10N Used condition as shown in the pictures Pedpfx Aow S Uccjaherc All data can be found in the photo of the nameplate.

Condition: good (used), Year of construction: 1969, Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press, press machine, hydraulic punch for Schüco tools, hydraulic press, multifunctional punch, punch, universal punch, punching machine -Handover: in the current condition as viewed -Condition: Cylinder slightly leaky -Hydraulic press: Hydraulic single-column press Pjdpfx Aow A Rzdeahorc -Pressing force: 160 tons -Stroke: 600 mm -Insertion height: 800 mm -Table size: 660 x 800 mm -Table hole: Ø 250 mm -Projection: 330 mm -Operation: hand lever -Dimensions: 1780/1090/H2920 mm -Weight: 8000 kg

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, turning length: 600 mm, rotational speed (max.): 4,500 rpm, swing diameter over bed slide: 415 mm, TECHNICAL DETAILS CNC control: Fanuc 21 i-T Swing diameter: 415 mm Turning length: 600 mm Speeds: up to 4,500 rpm Spindle power: 15 kW Number of turret positions: 11 MACHINE DETAILS Weight: 4,000 kg EQUIPMENT - Ejector - Collection device - Tools - Motorized automatic tailstock Pjdpfxewtq Ths Aahsrc

Condition: good (used), functionality: fully functional, total height: 2,950 mm, throat depth: 360 mm, pressing force: 100 t, table width: 560 mm, table length: 750 mm, overall weight: 5,000 kg, distance table to ram: 630 mm, Equipment: documentation/manual, For sale: 1 used hydraulic press Manufacturer: VEB WEMA Zeulenroda WMW Model: PYE100SS Total weight: 5 t Nominal pressing force: 100 MP Ram stroke: 500 mm Maximum distance between table and ram: 630 mm Prjdpfx Aexfzc Ioahsc Table: 750 x 560 mm Two-hand operation and closed hydraulic system

Condition: excellent (used), Year of construction: 1995, CNC lathe AVM Angelini Predpfx Aevt U H Hsahjc Type Snupy E 415 Year of manufacture 1995 CNC control Fanuc 21 i-T Swing diameter 415 mm Turning length 600 mm Speeds up to 4500 rpm Spindle power 15 kw Revolver 11-way Ejector collecting device Tools Motorized automatic tailstock Tools Weight 4 tons

Condition: used, Technical details: floor-plate length: 800 mm plate width: 455 mm Prsdpfxou N Dhij Aahoc plate height: 75 mm weight of the machine ca.: 264 kg transport dimensions LxWxH: 800 x 455 x 250 mm ram plate of a PYE 160S press Use: e.g. for reducing the installation height of the press or shortening the working distance (forward run) - with centre bore Ø 40mm continuous - with 6x part circular drilling Ø 16mm, pitch circle Ø 160mm - clamping slot diagonal according to DIN 650 ( a=19mm; h= 25mm; b= 38mm; c= 16mm - below with support plate = distance approx. 410mm *

Condition: ready for operation (used), C-frame Press, Hydraulic Press, PYE Press 3t, Used Machine Manufacturer: VEB Wema Type: PYTE 3.15 Podpow Hc H Hjfx Aahorc Overall dimensions: 500 x 730 x 1170 mm Pressing force: 3.15 tons Stroke: 280 mm Table size: 280 x 280 mm Electrical data: 380 V; 1.5 kW; 4 A

Year of construction: 2001, condition: used, machine/vehicle number: 361748, Eindruckwerk mit Nummerier- & Perforiereinrichtung / Imprinting Unit Numbering- & Perforation Unit Heidelberg PM / SM 52 N&PYear 2001 - SN. 361748 Eindruckwerk / Imprinting Unit Nummerierwelle mit 4 Sitzringen / Numbering shaft with 4 mounting rings 2 Perforierarme / 2 Perforating arm 2 Nummerierwerke / 2 Numbering boxes Predemikq Hepfx Aahoc 1 Schaltkurve links und rechts / 1 cam left and right Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1972, machine/vehicle number: 275, Eckeneinziehmaschine Kolbus EP- Corner Pulling Machine Kolbus EPYear 1972 - Serial-No. 275 Prodpfx Aoh Axdlsahjc Size max: 405 mm Accessories: 2-corner-pulling-heads Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test