Used Reading for sale (2,363)

Condition: repair required (used), Year of construction: 2025, functionality: limited functionality, machine/vehicle number: 24163 / 24191, Bakery Machines For sale as: used and partially damaged/contaminated – no warranty, no guarantees, sold as is, “as is, where is” Depositor + accessories & topping applicator + cleaning cart Manufacturer: bmTEC Machine specifications: see downloadable PDF Condition: used/damaged, in operation from early 2025 to early 2026 Nlsdpfxe Afmqhj Airjh Damage to the “Depositor”: Only the “Depositor” is mechanically damaged. During loading, the “Depositor” tipped over to the side and fell to the floor. The frame of the “Depositor” is bent. The gap dimensions vary considerably. Inside, residues from rodents and dirt are visible due to storage. In the area of the product inlet, a compression of the frame can be seen. One of the conveyor belts shows no tension. Inside one of the installed control cabinets, a plastic cover and a screw are lying loose. The “Topping Applicator”, which is controlled via the “Depositor” and the control cabinet installed there, shows no visible defects other than the usual signs of wear. However, soiling is also visible here. No visible irregularities can be seen on the sheets belonging to the machine and on the cleaning cart. Sales basis: loaded onto a truck at the location 83562 Rechtmehring

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 201269, total width: 1,150 mm, total height: 1,650 mm, total length: 900 mm, working width: 700 mm, input voltage: 230 V, type of input current: three-phase, overall weight: 170 kg, power: 0.75 kW (1.02 HP), passage height: 100 mm, height adjustment type: mechanical, working height: 850 mm, roll width: 700 mm, input frequency: 50 Hz, input current: 16 A, Equipment: CE marking, The used roller coating machine for adhesive is designed for applying adhesives such as glue to various surfaces, including veneer, aluminum veneer, and other materials used in the furniture, parquet, and woodworking industries. The machine is also suitable for materials such as plastic, cardboard, textiles, wood, and more. Nsdpfe Aayrnsx Airolh The adhesive roller coating machine uses an adjustable adhesive reservoir for even and precise adhesive distribution. The speed of the adhesive roller and the transport roller can be adjusted using a frequency controller. The machine can operate at speeds ranging from 5 to 50 m/min. The feed height can also be adjusted using a handwheel. The machine is fully functional and has been inspected in our workshop.

Condition: used, Year of construction: 1989, machine/vehicle number: 921, overall weight: 3,500 kg, type of input current: three-phase, ORT Italia RP20 hydraulic rolling machine for creating threads, knurls, and profiles through cold forming. Manufacturer: ORT Italia Nljdo Afaa Nspfx Airsh Model: RP20 Serial number: 921 Year: 1989 Number of rollers: 2 Maximum rolling force: 20 tons Maximum workpiece diameter: 60 mm Spindle speeds: 25, 40, 55, 65, 85, 105, 135 and 220 rpm Power supply: 380 V three-phase, 50 Hz Control: hydraulic / electromechanical Machine complete as shown in the photographs. Inspection possible at our warehouse. Loading onto the transport vehicle is the seller’s responsibility. Transportation is the buyer’s responsibility.

Year of construction: 2008, condition: good (used), Bread slicing machine PS Mako - Rianta BFS 500H-C model - Used - Year of manufacture: 2008 - Semi-automatic packaging machine, SL 400 model - Computer-controlled Neds Afwvvepfx Airjlh - Good technical condition - Collection from warehouse / shipping option available - Price upon request

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, ORT Italia Netting Machine CE certified Nledpfjzb Imaox Aireh Model RP 18/U Year 2012 Siemens SIMATIC OP17 CNC control panel Reference: F24 €8,500, as is

Condition: ready for operation (used), Year of construction: 1989, operating hours: 2,100 h, functionality: fully functional, thread length: 880 mm, feed length X-axis: 1,000 mm, feed length Z-axis: 100 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 5 m/min, position of the milling head: Horizontal, swivelling, center height: 1,060 mm, type of input current: AC, power of feed motor: 4,000 W, milling spindle length: 200 mm, spindle bore: 90 mm, spindle speed (max.): 400 rpm, spindle speed (min.): 25 rpm, mandrel length: 200 mm, collet bore: 90 mm, clamping length: 880 mm, workpiece diameter (max.): 500 mm, Thread Milling and Gear Hobbing Machine MSZ 5A352ПФ2 The MSZ model 5A352ПФ2 is a universal thread milling and gear hobbing machine, designed for machining splines, worms, and cylindrical gears by milling and hobbing processes. Manufactured in 1984, the machine is intended for industrial applications requiring reliable performance, versatility, and repeatable accuracy. The machine is suitable for workpieces with a maximum length of 1000 mm and a maximum diameter of 500 mm. The maximum machining (spline/thread) length is 880 mm, and the machine supports gear cutting up to module 8, covering a wide range of thread and gear machining tasks. Helix and thread angles up to 30° can be machined, allowing flexible use in mechanical engineering and transmission manufacturing. The milling and hobbing spindle features a 90 mm spindle bore and supports cutting tools with a maximum hob diameter of 160 mm and a maximum hob length of 200 mm. The spindle operates in a speed range of 25 to 400 rpm, providing suitable cutting conditions for different materials and tool diameters. The main drive motor offers multiple power and speed stages (5 / 6.3 / 10 kW at 750 / 1000 / 1500 rpm). The machine is equipped with stepless longitudinal and radial feeds, with longitudinal feed rates from 2 to 100 mm/min and radial feed rates from 2 to 50 mm/min, enabling precise control during machining operations. The milling head is horizontal and swivelling, and the machine allows accurate synchronization for thread milling and gear hobbing operations. With overall dimensions of approximately 3100 × 2270 × 2100 mm (up to 3540 × 2515 × 2100 mm with auxiliary equipment) and a total weight of about 7890–8500 kg, the 5A352ПФ2 features a rigid, heavy-duty construction that ensures excellent stability and vibration damping. The machine operates on three-phase AC power (380 V, 50 Hz) and is equipped with a PU F5007 control system. Condition: *Used machine *Ready for operation *Fully functional *Operating hours: approx. 2,100 h Scope of delivery: *Complete set of change gears *Technical passport (Russian) *Operating manual (Russian) Typical applications: Nsdpfx Aex Unpvjirolh *Thread milling *Gear hobbing (spur gears, worms) *Machining of transmission components *General mechanical engineering *Repair and small- to medium-series production

Condition: like new (used), Year of construction: 2015, For Sale: Brand: Kaak Driem Type: Sheeting Bread Line Year of Construction: 2015 The line has already been disassembled and cleaned. It will be reassembled around mid-January. Currently offered for sale for €280,000. Nlodpfx Aisz Epddsreh Please refer to the PDF file for the complete description and specifications. Layout drawings, electrical diagrams, and parts lists are available. It is possible to view this line at our location. If you have any questions or comments, please do not hesitate to contact us. Sincerely, Leo Holland

Condition: used, Offered: Mechanical tapping machine with change-gear feed. Equipped with T-slot worktable, tool holder, mechanical operating levers, foot switch and emergency stop button. Inspection possible by appointment. Nljdpfxe Afzaks Airsh

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 104605-104645, input voltage: 400 V, total width: 1,500 mm, total length: 4,500 mm, total height: 2,820 mm, type of input current: three-phase, Fortuna Primus K4 – 4-row roll divider – rounder + depositor + GEK, year of manufacture 2011 Dough divider & rounder Condition: fully functional, directly from ongoing operation Application: round rolls, e.g., Kaiser rolls, braided rolls, salt rolls, wheat & mixed doughs • Weight range: approx. 40-110/120 g • Hourly output: approx. 4,800 pieces/hour • Rounding chamber height: approx. 10–35 • Rounding speed: scale 0–30 • Hopper volume: 20–25 kg • Dough yield: TA 160–165 • Connection power: approx. 1.5 kW • Machine weight: 650–700 kg • Depositor: for 60 × 80 cm trays (58–78) _____ Equipment • Fortuna Primus K head machine • 4 rows • GEK pre-fermentation cabinet matching the line • Rounding/stamping sets: Kaiser rolls, braided rolls, salt rolls • Complete depositor • Immediately ready for operation • In use until recently • Clean, well-maintained, regularly serviced • No known defects • Electronics modernized (new display) INSPECTION and TRIAL RUN possible (only) by appointment Freight possible, fully assembled with a jumbo truck Nsdsy St U Sspfx Airjlh (L/W/H = approx. 4,500 mm x 1,500 mm x 2,820 mm)

Condition: used, total length: 1,000 mm, total width: 400 mm, total height: 1,100 mm, Year of manufacture: 2020 Colour: White Empty weight: 100 kg - Year: 2020 - CE marking present: Yes Nlodpfj Aayddjx Airjh - Serial number: 200120 - Max. working width [mm]: 450 - Max. work thickness [mm]: 30 - Voltage [V]: 240 - Fuse [A]: 16 - Power [kW]: 0.3 - Transport dimensions: 1000mm x 400mm x 1100mm (l x w x h) - Transport weight [kg]: 100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 0049, overall weight: 12,000 kg, Manufacturer: Profiroll Type: UWRA 160S Control system: Siemens Machine type: Ring rolling machine Pressing force: 63 t Max. outer diameter of round parts: 160 mm Dimensions: 80 mm Roller bore: 30/100 Nledpfxoz Tznrs Airoh

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, OSAMA: IDEALTECH HEATED ROLLER MACHINE MODEL HOTMASTER, GLUE MELTER AND ROLLER PRESS The line includes: 1 feeding conveyor with a COSMA cleaning brush 1 IDEALTECH GLUE MELTER 1 OSAMA GLUE APPLYING MACHINE 1 OSAMA central conveyor 1 press (6 pressing rollers, 3+3) 1 COSMA discharge conveyor Metering and application rollers with resistors/oil heating system of 8 kW x 2 - No. 03 motors at the end of the application and metering rollers, independently controlled - Adjustable speed via no. 03 electric frequency regulators with an automatic "reverse" rotation system for the rollers to clean the machine at the end of the work cycle - Heating system with thermal oil and electric resistors - Automatic/motorized lifting of the upper rollers with digital position display - Top applicator 3 kW + bottom applicator 3 kW + top metering device 0.75 kW - Part movement control 0.55 kW - Lifting torque of the top rollers 0.18 kW - No. 02 motorized steel rollers at the machine inlet - No. 02 motorized steel rollers at the machine outlet - Stainless steel tray for machine cleaning - The machine is programmable to heat the rollers automatically without any control or operator intervention - Machine ready for the application of glue guns for the application of PUR glue, without glue guns - Machine ready for integration into a production line * No. 01 tube for PUR glue fume extraction, 145 mm diameter. HIGH-TECH AUTOMATIC 6-ROLLER PRESS MODEL CLR/6-1300 STANDARD CE, VOLTAGE 400/50 3PH Complete machine consisting of: Nedsz Ng Agepfx Airelh - Inverter speed variator motor - Independent pressure adjustment system for each pair of rollers, with a shared pressure sensor display between the main pressing rollers and the secondary drive rollers - Reinforced structure for high working pressure No. 02 + 02 (four) rubber pressing rollers, Shore hardness 90 +- 5 Shore No. 02 (two) rollers positioned in the middle, made of chrome steel Roller diameter: 300 mm Useful working width: 1300 mm Minimum/maximum working height: 0-100 mm Video available upon request.

Condition: used, STREUMASTER SW3 FC 3 Cubic Meter Lime Spreader Soil Stabilizer Container: • Year of manufacture: 2017 • 3 m³ container volume • Filling connection: 3" / 3" Spreading mechanism: • Working width: 2,460 mm • Partial widths: 3 x 820 mm • Spreading rate at 1 km/h: 1-50 kg/m² (with a binder density of 1 kg/liter) Weight and dimensions: • Tare weight: 1,250 kg • Dimensions: 1,600 x 2,550 x 1,990 mm Tractor requirements: • Three-point linkage: Category 2 DIN / ISO 730 - 1 • Required hydraulic output: 50 liters/min at 180 bar • Max. permissible hydraulic flow rate: 75 liters/min • Electrical system: 12 V - Loading capability available! - Only 1 owner! - German machine! - Ready for use! Errors and prior sale excepted! = Further information = Nedpfewv H Nqox Airslh Year of manufacture: 2017 Design year: 2017 Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Working width: 30 cm Adjustable glue application rate Single-sided glue application Emergency stop button (mushroom switch) Feed table with rollers Total table length: 130 cm Nodpfx Aiszxpvvsrelh Weight: 150 kg 380 V Year: 2003

Condition: used, Year of construction: 2013, pressure 20 - 600 kN adjustment of rolling slide 2 x 90 mm diameter of rolling spindle 120 mm roll spindle height over machine bed 200 mm Control SIN 840 D taper length of the roll spindle 200 mm rolling spindle turning speeds 0 - 34 1/min torque per rolling spindle 6.160 Nm power capacity 2 x 8,4 kW distance between rolling spindles min. 271 / max. 368 mm rolling tool outer diameter max. 300 mm total power requirement 26 kW weight of the machine ca. 7,1 t dimensions of the machine ca. 9,70 x 4,50 x 3,80 m CNC machine for gear cold rolling / thread rolling Felsomat loader cell Njdpfxs Afar Ej Airolh Complete housing

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 609102.190467.124622, input voltage: 400 V, warranty duration: 6 months, overall weight: 225 kg, control voltage: 24 V, nominal power: 0.9 kW (1.22 HP), input frequency: 50 Hz, input current: 10 A, year of last overhaul: 2026, used bread slicer Treif Diskus SB, overhauled, blade sharpened, weight 225 kg, year of manufacture 2015, machine no. 609102.190467.124622, 50 Hz, 400 V, 0.9 kW, 2.25 / 10 A, 1.22 PS Njdpoz Sdq Iefx Airolh

Condition: used, functionality: limited functionality, overall weight: 2,100 kg, workpiece diameter (max.): 70 mm, spindle diameter: 54 mm, type of input current: three-phase, spindle speed (max.): 114 rpm, spindle speed (min.): 24 rpm, roll width: 160 mm, stroke length: 15 mm, SENY D-75-B – Hydraulic Thread Rolling Machine – 220 kN For sale is a fully functional hydraulic thread rolling machine from the Spanish manufacturer SENY, model D-75-B, with a maximum rolling force of 220 kN. Due to operational changes, the machine has been taken out of service and is no longer in productive use. However, it is still operational and can be inspected and demonstrated under power after prior appointment. The machine is designed for chip-free cold forming of external threads, as well as for knurling and profile rolling operations. The thread rolling process enables the production of high-strength threads with very good surface quality, without removing material. Technical data General information Manufacturer: SENY Country of manufacture: Spain Type: D-75-B Factory number: 327 Machine type: Hydraulic thread rolling machine Year of manufacture: Unknown Operating voltage: 380 V three-phase Rolling capacity and machining range Maximum rolling force: 220 kN (approx. 22.4 t) Workpiece diameter: 3–70 mm Maximum thread pitch: 6 mm Maximum knurling pitch: 2.25 mm Maximum rolling width: 160 mm Rolling spindles Rolling diameter: 133–170 mm Rolling spindle diameter: 54 mm (standard version) Rolling spindle spacing: 135–230 mm Rolling spindle speeds: 24 / 30 / 38 / 45 / 62 / 72 / 90 / 114 rpm Hydraulics and feed Hydraulic roller feed Maximum working stroke: 15 mm Feed speed: 0.5–6 mm/s Adjustable rolling time: 0.1–100 seconds Adjustable pause time: 0.1–100 seconds Hydraulic oil tank: approx. 130 liters Drive power Main motor: 5.5 kW Total electrical power consumption: approx. 8.6 kW Weight Machine weight: approx. 2,100 kg Condition and scope of supply Used industrial machine Fully functional Nledpoz Sl Arjfx Aireh Taken out of service due to operational changes Machine is still operational Inspection and demonstration under power possible after prior appointment No thread rolling tools or rolling sets included in the scope of supply Possible applications The machine is particularly suitable for the production of external threads on screws, bolts, threaded rods and other cylindrical workpieces. In addition, knurling and profile rolling operations are possible with the appropriate tools. The robust machine design and hydraulic feed enable use in both single-piece production and series production. Inspection and further information The machine can be inspected and demonstrated under power after prior appointment. Further information and pictures are available on request. Note: The technical data is based in part on manufacturer and comparative documentation of the SENY D-75-B series. Deviations due to the year of manufacture or design may occur. All information without guarantee. Subject to prior sale.

Condition: used, Year of construction: 2011, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Complete MECATHERM line from 2011, consisting of an H1 volumetric divider and an RT2 shaping unit with an integrated pre-fermentation and resting system. Industrial line designed for the automated production of baguettes, long loaves, and other bakery products, depending on the shaping equipment used. Line composition: - MECATHERM H1 volumetric divider - Complete MECATHERM RT2 shaping unit - Integrated pre-fermentation and dough resting system - Shaping and elongation system - Automatic depositing system onto trays - Several additional shaping accessories and equipment - Conveyors and connecting equipment Features: - Manufacturer: MECATHERM - Year: 2011 - H1 divider capacity: up to 2,500 pieces/hour, depending on the weight Nedpfx Asz Sfa Dsirjlh - Production adapted for baguettes and various loaf sizes - Automated line from dividing to depositing onto trays Complete line sold with numerous accessories. Additional information and video available upon request.

Condition: excellent (used), functionality: fully functional, Working width: 800 mm Maximum element height: 100 mm Njdpfx Ajz Agvhoirjlh Manual adjustment of roller spacing Simultaneous application of adhesive to the top and bottom surfaces

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, input voltage: 400 V, overall weight: 400 kg, type of input current: three-phase, total length: 3,000 mm, total width: 1,600 mm, total height: 1,850 mm, control voltage: 24 V, input frequency: 50 Hz, input current: 3 A, Object A240401. Rebuilt stainless steel semi-automatic (hand) packing conveyor with Kwiklok clip closing set. Stainless steel hand packaging conveyor, including 2 bag blowing tables, and Kwiklok bag tensioner type 1082J8 and Kwiklok clip closing machines, type 872 XLS. Machine direction: from Right to Left. Machine information: Total machine length: 3.0 meters Total machine width: 1.6 meters (including bag blowing table) Nledpfx Aijz Euk Aereh Total machine height: 1.85 meters Machine working height: 0.97 meters Length of input conveyor used: 2.65 meters Length of discharge belt used: 0.3 meters Flight distance: 305 millimeters Machine capacity: 1800 packages per hour. Electrical data: Power connection: 400 volts, neutral and earth. Power consumption: 3.2 kilowatts. Plug connection: Cee-Form 5 pin 16 Amp (round red plug). Compressed air: No. Minimum and maximum product dimensions: Products from 100 to 500 mm long. Products from 80 to 210 mm wide. Products from 40 to 160 mm high. Machine version: Frame and legs (2) made of stainless steel construction, ASI 304. Deck, guides, and flights are stainless steel ASI 304. Bag tensioner machine, Manufacturer Kwiklok, type 1082J8. Clip closing machine, Manufacturer Kwiklok, type 872 XLS (clips Kwiklok type JNRP). At the end of the transporter, there is a roller deck, length 0.3 millimeters. Machine equipped with a safety guard at the beginning of the roller deck. Machine stands on wheels (mobile). Fixed carrier speed. New electrical installation on the packing track. Machine is completely rebuilt. Machine description: Packing track, machine suitable for packaging food and non-food products in foil bags. Machine includes: 2 sets of bag blowing tables. Warranty: 3 months.

Condition: like new (used), Year of construction: 2021, operating hours: 900 h, functionality: fully functional, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, spindle diameter: 200 mm, Equipment: documentation/manual, Mazak Integrex J200s Year 2021 Control unit: Smooth G Distance between spindles: 1000 mm Maximum machinable diameter: 500 mm Maximum bar capacity: 65 mm X-axis travel: 450 mm Njdpfx Aijzz Rt Ujrelh Y-axis travel: 200 mm / +- 100 mm Z-axis travel: 960 mm Maximum spindle speed: 4000 rpm Spindle taper: A2/6 Spindle bore (main spindle): 76 mm Tool magazine capacity (automatic tool changer): 36 Capto Chip conveyor: Mayfran belt type

Condition: excellent (used), Year of construction: 2009, 579 USED ARTEZEN SV 3 – Mondial Forni bread divider, supplied with a belt rounder. The units are offered as a complete set. Nedpfsz Iktxjx Airolh DIVIDER EXTERNAL DIMENSIONS (in cm): - W: 55 (82 with hopper) - L: 223 - H: 177 - belt W: 29 ROUNDER EXTERNAL DIMENSIONS (in cm): - W: 70 - L: 185 - H: 145 TECHNICAL DATA: - year of manufacture: 2009 - power supply: 3+N+PE 400V 50Hz - weight range: 80–1780 g - 1- and 2-piston operation The price is the net price per set. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: ready for operation (used), functionality: fully functional, External dimensions: 2500 × 1300 mm Stepless feed speed adjustment Year of manufacture: 2017 Motor power: 0.75 kW Nlodszxz H Hopfx Aireh

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: LU21C0001, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, input current: 40 A, Brand new , never used Versa PUR Tank Melter for PUR glue application. This aggregate is stil in its original packing . The aggregate comes from close down of a factory here in Norway. Ready to be send . Please contact me for more information. Njdpez Sqppofx Airjlh

Condition: excellent (used), mileage: 5,31,928 km, power: 352 kW (478.59 HP), first registration: 03/2016, fuel type: diesel, tire condition: 50 %, axle configuration: 8x4, wheelbase: 6,800 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 9,360 mm, total width: 2,550 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 11,500 kg, Equipment: ABS, crane, electric window regulation, = Additional options and accessories = - Brake assist system - Power take-off (PTO) - PTO - Radio/CD player - Stability control - Sun visor = Remarks = Crane Number of hydraulic extensions: 3 Remote control: × Rotator: ✓ Clamshell bucket: ✓ Very beautiful and unique MAN TGS configured as a Z-Crane/Hook Lift with WIERDE WIDESPREAD SYSTEM and driving system!! In addition to the options already mentioned, it features: -Automatic -8x4 -3 steering axles -Widespread -Load capacity 22800kg -Palfinger epsilon Q180 z 95 tap -18 to -9.5 meter extendable -High seat -DRIVING SYSTEM TO BE OPERATED FROM ABOVE THE HIGH SEAT!!! -Hook arm 30 tons -Air conditioning etc etc Original Dutch car directly from the first owner! = More information = General information Year of construction: 2016 Registration number: 53-BGZ-3 Technical information Number of cylinders: 6 Engine capacity: 12.419 cc Axle configuration Front axle: Max. axle load: 10000 kg; Steering; Tyre profile: 50% Rear axle 1: Max. axle load: 10000 kg; Steering; Tyre profile: 50% Rear axle 2: Max. axle load: 11500 kg; Tyre profile: 50% Rear axle 3: Max. axle load: 11500 kg; Steering Weights Empty weight: 20.310 kg Carrying capacity: 22.790 kg GVW: 43.000 kg Max. towing weight: 50.000 kg Functional Crane: Palfinger Q180 Z 9.5 HOOGZIT, year of manufacture 2015, behind the cab Extendable superstructure: Yes Condition Technical condition: very good Damages: none Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands Nedpfo Afhrmsx Airolh And reach us at: Trucks: Passenger cars: Website: Email: