Used Recoiler Decoiler for sale (329)

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right Godpfxszrpr Ds Ap Dobu as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Year of construction: 1976, condition: good (used), strip width: 300 - 1.350 mm Gsdpfx Apobh Ubwo Djbu strip thickness: 0,35 - 3 mm coil weight: 12,5 t mandrel Ø: 508 mm

Year of construction: 1980, condition: used, strip width: max. 2.000 mm strip thickness: 0,4 - 4 mm Gbedpeckanpofx Ap Dsu coil weight: 20 t cone Ø: 300 - 1.000 mm

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Wire diameter range: 2,0 - 6,0 mm Wire feeding length: unlimited Gjdpez Imcvjfx Ap Dobu Bend-back clearance: max. 1.000 mm Weight: 4.000 Kg. complete with an motorized wire decoiler WAFIOS AHL 41

Condition: excellent (used), Year of construction: 1992, number of straightening rollers: 21, total length: 3,200 mm, straightening roller diameter: 30 mm, total height: 2,100 mm, total width: 2,000 mm, sheet thickness (max.): 6 mm, Decoiler Max. width 350 mm Clamping area coil internal  mm Coil diameter 1500 mm Gsdpfxozcu S Sj Ap Dsbu Work load 1000 Kg Straigtner Width 250 mm Roll diameter 30 mm Number off rolls 21 units Working speed 40 M/Min   Max. thickness 6 mm at 240 N/mm2 Max. Thickness 5 mm at 400 N/mm2 Length:3200mm Width:2000mm Height:2100mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1985, machine/vehicle number: 30522, sheet width:120 mm Gbedpfxecxxq Ss Ap Dsu coil weight:75 kg dimensions of the machine ca.:2,50 x 1,25 x 1,50 m

Condition: new, Year of construction: 2025, Decoiler RAZ-DV 1250/4 - up to 4,0 t stationary - with 5 clamping arms, ball bearings and with disc brakes - ecordable coil width: 1250 mm - Upper loading capacity: 3.000 kg - Downer loading capacity: 4.000kg Gbsdpev I Um Nsfx Ap Dju

Condition: new, Year of construction: 2025, Decoiler RAZ-DV 1250/2 - up to 2,0 t stationary - with 4 clamping arms, ball bearings and with disc brakes Gjdpov I Ur Eefx Ap Djbu - ecordable coil width: 1250 mm - Upper loading capacity: 2.000 kg - Downer loading capacity: 2.000kg

Condition: good (used), Load capacity: 200 kg Material width: 300 mm Coil inner diameter: 240-580 mm Coil outer diameter: 1200 mm Gjdpfoh Rfhhox Ap Debu

Condition: used, Technical specifications: Track width: 300 mm Max. cutting height: 120 mm Max. saw blade diameter: 350 mm Continuously adjustable feed rate Automatic lubrication system Anti-recoil protection Culaga Dust extraction port: 200 Safety switch Power supply: 380 V Main motor power: 25 kW Overall dimensions: Length: 1730 mm Width: 1490 mm Gbsdpfx Apszzbfzs Dsu Height: 1440 mm

Condition: excellent (used), Decoiler FRECH 2 to x 650 mm, coil-inside-diam. 240 - 270 mm, coil-outside-diam. 1500 mm Gbodpfezd R Ttox Ap Dou

Condition: excellent (used), functionality: fully functional, We offer this very good FACADE PANEL ROLL FORMING machine. Gbsdpezyclmofx Ap Dju Input: 420mm output: 310mm Decoiler, 16 stations, automatic cutting.

Condition: ready for operation (used), Decoiler OBRU 1 to x 280 mm, coil-inside-diam. 290 - 570 mm, outside-diam. 1000 mm Gsdpfxey Ni Amo Ap Dobu

Condition: used, Year of construction: 1997, functionality: unexamined, total height: 2,500 mm, total length: 33,223 mm, total width: 2,000 mm, table width: 700 mm, input frequency: 60 Hz, input voltage: 460 V, table length: 5,000 mm, table height: 1,200 mm, control cabinet width: 600 mm, control cabinet length: 1,500 mm, control cabinet height: 2,500 mm, compressed air connection: 5.5 bar, Stud & Track Rollforming Machine With 4.5 Tonnes Decoiler & Crane 5 Tonnes Capacity - Fully Dismantled - Ready to be transported MACHINE MANUFACTURER: BRADBURY UK GENERAL SPECIFICATIONS STUD LINE MATERIAL : GALVANIZED COLD ROLLED STEEL MATERIAL STRENGTH : Gbjdjxya Hzspfx Ap Dju 85.000 PSI MAX YIELD STRENGTH 55.000 PSI MIN· YIELD STRENGTH THICKNESS: 20 GA. TO 16 GA.-"HEAVY GAUGE" 22 GA. TO 25 GA.-"LIGHT GAUGE" ENTRY COIL WEIGHT: 10.000 LB MAX ENTRY STRIP WIDTH: 12" MAX C APPROX. 5" MIN C APPROX. ENTRY COIL I .D: 20" MAX ENTRY COIL O.D: 72" MAX EFF. LINE SPEED : l20-150 FPM-"HEAVY GAUGE" 175-250 FPM-"LIGHT GAUGE" ROLLFORMER SPEED: 120-250 FPM PASS LINE HEIGHT: 51" LINE DIRECTION : RIGHT TO LEFT MODE OF OPERATION : PREPUNCH/POSTCUT CUT LENGTH : 20' MAX. 5· MIN GAUGE" : 90 % C APPROX. ) OF PRODUCT iON < i 6' LENGTH TOLERANCE : •/- 1/16" AT 250 FPM MAIN POWER : ELEC : 460 VOLTS 60 HERTZ 3 PHASE 192.2 FLA : AIR : 80 PSI MIN. CLEAN 6 DRY : HYO : 1500 PSI WORKING PRESSURE CONTROL : 115 VOLT AC AIR CONSUMPTION: 2 CFM MAX. AT 80 PSI

Year of construction: 2026, operating hours: 5 h, condition: like new (used), functionality: fully functional, Equipment: CE marking, The Rhino Drive Master is a compact yet powerful mini-skid-steer attachment designed for quickly and controllably driving posts and pipes into the ground. Work faster and significantly safer than with a manual post driver, sledgehammer, or loading platform. Level the mast, position the machine, and effortlessly drive an entire fence line into the ground. Key Features & Benefits: Powerful & Controlled Performance Long-stroke piston for better energy transfer and reduced recoil. Control valve that reduces hydraulic peak pressure. Between 700 and 1200 strokes per minute with a striking force of 203 Joules. Flexible Positioning Adjustable mast: 7° away from the operator, 15° towards the operator – ideal for precise alignment. Mounting from either side – ideal when only one side of the terrain is accessible. Gsdpsz Irm Tofx Ap Dobu Compact & Compatible Suitable for most mini-skid-steer models. Quick mounting with the included mounting plate; custom mounting possible upon request. Ideal for use in combination with other mini-skid-steer attachments for efficient site preparation. Versatile in Use Suitable for steel and wooden round, square, and rectangular posts up to ø150mm outer diameter and 3 meters long. Utilizes existing (owned or rented) hydraulically powered skid-steers. Oil pressure: 20 - 30 LPM at 70-140 bar The Drive Master is available for sale with or without a Toro skid-steer loader. The price in the advertisement is without a Toro skid-steer loader.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 2,600 h, functionality: fully functional, machine/vehicle number: 15243485, type of input current: three-phase, total width: 3,600 mm, total length: 39,700 mm, total height: 1,900 mm, input voltage: 380 V, overall weight: 19,700 kg, The line consists of double decoiler, pre-heating section, set of forming rollers, foaming machine, polymerization bench, cutting system with flying saw, belt conveyor, stacking bench with return and a control panel. The line is equipped with a COMBI system allowing quick profile type changeover. The line produces two profiles: Godpfx Aszwb D Nsp Debu 1. H39mm, coil width 120mm, thickness 0.2-0.25mm 2. H45mm, coil width 136mm, thickness 0.2-0.25mm Technical Specifications: - maximum line speed - 36 m/min - maximum profile length - 6.5 m - maximum coil weight - 500 kg - the line power consumption approx. 36-40 kW IMPORTANT: the line currently produces only non-perforated profiles. However, perforated module can be integrated into the line for extra cost

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, Professional Spiral Duct Forming Machine – Ø80–1600 mm We are offering for sale a complete industrial machine for the production of round spiral ducts (SPIRO ducts) for HVAC, ventilation and dust extraction systems. We are the first owner. The machine was purchased directly from the manufacturer, professionally commissioned, configured and fine-tuned for production. It has only been used occasionally for our own production requirements and has never been operated in continuous or multi-shift mass production. The machine is fully operational, properly adjusted and ready for production. It is currently connected and can be demonstrated under actual production conditions, allowing the buyer to inspect the complete process and the quality of finished ducts before purchase. Key Features * working diameter range: Ø80–1600 mm * production speed: up to 60 m/min * installed power: 11.25 kW * galvanized steel: 0.4–1.2 mm * stainless steel: 0.4–0.7 mm * aluminium: 0.4–1.3 mm * pneumatic sheet metal strip decoiler * touchscreen control panel * automatic lubrication system * automatic forming angle adjustment * automatic rotary cutting * automatic fault detection * smooth ducts or single/double reinforcing beads * external spiral lock seam * machine weight: approx. 2,900 kg 39 Forming Heads Included The machine comes with an extensive set of 39 forming heads covering 22 diameters: Ø80 (1), Ø100 (2), Ø125 (3), Ø160 (3), Ø200 (3), Ø250 (3), Ø315 (3), Ø355 (2), Ø400 (2), Ø450 (2), Ø500 (2), Ø560 (2), Ø630 (2), Ø710 (1), Ø800 (1), Ø900 (1), Ø1000 (1), Ø1120 (1), Ø1250 (1), Ø1400 (1), Ø1500 (1), Ø1600 (1). The set therefore covers the full working range from Ø80 to Ø1600 mm, with additional heads for the most commonly produced diameters. Spare Parts Package A comprehensive package of spare and wear parts is included, such as forming and guiding components, lock-seaming rollers, pneumatic components, cutting knives/rotary cutting components and decoiler braking parts. This provides an important operational reserve and helps minimise downtime without having to immediately source essential parts internationally. Production-Ready + Training The buyer receives a fully configured and proven production machine, not an uncommissioned unit requiring extensive setup and adjustment. Gbedpfx Aezt Ni Eep Dsu We provide on-site commissioning assistance and operator training at the buyer’s facility, including machine operation, forming head replacement, adjustment for different diameters and sheet thicknesses, maintenance and trial production. The machine can be inspected and demonstrated during actual spiral duct production before purchase. Approximately 100 steel stacking racks (Maurack type) for storing and transporting finished ducts are also available and can be purchased together with the machine. The machine is located in Poland. Transport can be arranged individually. Price: upon request / subject to negotiation. For further information, photos, videos or to arrange a live machine demonstration, please contact us directly.

Condition: new, Year of construction: 2025, Single band decoiler 1.250 mm - Loading capacity up to 4.000 kg - Inner φ 480-530 mm - with 5 clamping arms, ball bearings and with disc brakes Gbsdsxd Rgaepfx Ap Dou - max coil width: 1.250 mm

Condition: new, Year of construction: 2025, Single band console decoiler RAZ-ENO 1250/2 - Loading capacity 2.000 kg - Inner φ 480-530 mm - with 4 clamping arms, ball bearings and with disc brakes Gbsdpfxjxd Rgmo Ap Dsu - max coil width: 1.250 mm

Condition: excellent (used), Year of construction: 1995, loading capacity: max. 40 Kg. Gjdpfxei T Ir Ao Ap Djbu disc outside diam. 650 mm bundle outer diam. max. 600 mm bundle innert diam. 170 - 310 mm bundle width: max. 200 mm

Condition: used, Coil Sheet Metal Cutting Line – CARBONINI SLER 1500 RIG – Year 2009 Industrial CARBONINI coil processing and sheet metal cutting line, designed to perform coil unwinding, sheet metal straightening, notching and cutting operations. Gbsdpez Nz S Nofx Ap Dou The line is capable of processing sheet metal with a maximum working width of 1,500 mm and a declared maximum thickness of 2 mm. The system consists of several processing units arranged in sequence for sheet metal preparation and cutting. Line Configuration 1. Coil Decoiler Unit designed to support and unwind sheet metal coils, feeding the material into the processing line. 2. Sheet Metal Straightener Straightening unit designed to correct deformations in the sheet metal as it is unwound from the coil, preparing it for subsequent processing operations. 3. Notching Unit Unit designed to perform notching operations on sheet metal according to specific production requirements. 4. Shearing Unit Cutting unit designed to cut sheet metal to the required dimensions. Main Features Maximum working width: 1,500 mm Declared maximum sheet thickness: 2 mm Complete system comprising a coil decoiler, sheet metal straightener, notching unit and shearing unit. Heavy-duty industrial construction with protective guards around the operating units. Electrical control cabinet and operator control station visible in the photographic documentation. Machine Identification Details Manufacturer: CARBONINI Model: SLER 1500 RIG Year of manufacture: 2009 CE marking: Present on the manufacturer's identification plate Weight indicated on the identification plate: 6,200 kg

Condition: used, Year of construction: 2003, machine/vehicle number: 1964, Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Gbjdpfx Apjuqc Ivj Dju Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg

Condition: used, Technical specifications: Gbedozhulujpfx Ap Dsu Track width: 300 mm Max. cutting height: 100 mm Smooth feed rate adjustment Automatic lubrication system Anti-recoil protection Culaga Dust extraction port: 2x160 mm Safety switch Power supply: 380 V Main motor power: 22 kW Overall dimensions: Length: 1900 mm Width: 1580 mm Height: 1550 mm

Year of construction: 1975, condition: used, strip width: max. 450 mm Gjdpsbh S E Esfx Ap Debu strip thickness: 0,2 - 4 mm coil weight: 5 t mandrel Ø: 406/508 mm

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric & manual pump, all-steel floor Equipment: - Electric pump - Swing-out tailgate - 14 lashing points Net price: €11,722.69 / Gross price: €13,950.00 Article number: UDB235361811.01 Technical data: • Brand: Unsinn • Model: UDK-B 3617-35-14 • Vehicle type: Three-way tipper • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 366 x 175 x 120cm • External dimensions (LxWxH): 515 x 191 x 198 cm • Loading height of the floor: 77 cm Gbsdpfxoz Ri H Do Ap Deu • Permissible total weight: 3,500 kg • Tare weight: 1,245 kg • Payload: 2,255 kg • Chassis: High-loader (wheels under the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsionally rigid longitudinal frame chassis for safe driving characteristics • Aluminum side panels, anodized, double-walled • Steel corner posts, removable • Fold-down rear panel made of aluminum profiles (H=350mm) to protect the rear lights during unloading • Swing-mounted rear flap made of smooth aluminum profiles • Cargo area partition made of aluminum, flexibly pluggable for dividing the cargo area optionally in the middle, into one-third and two-thirds • Anodized, fixed bulkheads (H=1.20m) made of smooth aluminum profiles, ideally suited for advertising stickers • Volume: 7.7 cubic meters of bulk cargo • Zinc-plated toggle lever locks with spring securing • All-steel floor, 3mm hot-dip galvanized – extremely robust • Drawbar and frame hollow profile construction welded and completely hot-dip galvanized • many cross members, resulting in high point load capacity • all transverse and longitudinal supports rest on the ground • 14 lashing eyes, countersunk in the steel floor, symmetrically arranged • Lashing eyes on and under the loading platform can be loaded with up to 1500 daN (kg) and rotated 360° • Patented cargo securing system Spinlock for more flexibility and efficiency in cargo securing, DEKRA certified • Solid 4-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/75AH) in the box including cover • Manual pump, included, with matching socket insert for convenient and easy tilting with the cordless screwdriver in case of low battery • Removable remote control for electric hydraulics • Integrated battery charger with Schuko plug • Flat cover with recoil spring to protect dried firewood in bad weather, including storage compartment on the front side panel • Integrated ramp shaft with tensioning device and folding license plate holder • Maintenance-free rubber spring axles from ALKO • Reverse drive automatic • ALKO overrunning device and parking brake • 13-pole connector • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • 2 work lights mounted at the rear for optimal lighting of the maneuvering and unloading area • Reinforced, automatic support wheel, for safe parking of the loaded trailer, load capacity 500kg • Premium maneuvering handle with tensioning strap winder