Used Red Ash Neider for sale (31,638)

Year of construction: 2010, condition: used, Used machine Used Schneider screw compressor type AIRMASTER AM 7-10 with Schneider DK 985 ECO refrigerated compressed air dryer and compressed air tank. Year of manufacture: 2010 Compressor technical data: Volume flow: 930 l/min Final compression pressure: 10 bar Motor power: 7.5 kW Refrigerated dryer technical data: Air volume flow: 985 l/min Max. operating pressure: 16 bar Refrigerant: R134a Air connection: 3/4'' internal Gjdoxy Avlepfx Ah Heil Power consumption: 0.3 kW Compressed air tank technical data: Tank volume: 270 l Max. operating pressure: 16.5 bar Availability: by arrangement Location: Flörsheim

Year of construction: 1994, condition: ready for operation (used), A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible. Gsdpfox Ih D Tex Ah Heil

Condition: ready for operation (used), Vertical Grinder Matra Schneider RH 3/800 Rotary table diameter: 1000 mm grinding height: 1000 mm workpiece height: 1000 mm grinding wheel diameter: 300 mm total power requirement: 30 kW machine weight approx. 12 t Gsdpfx Aexx R Dbsh Hjil

Condition: used, maximum load weight: 2,581 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 01/2024, loading space length: 4,800 mm, loading space width: 2,060 mm, KOMW25346846, Internal/loading dimensions: 480 x 206 cm Payload: approx. 2581 kg Gross vehicle weight: up to 3500 kg Unladen weight: approx. 919 kg 3 braked axles Robust, fully galvanized chassis with V-drawbar Overrun brake and parking brake Steel frame and support rails made from perforated plate, fully welded and hot-dip galvanized Transport surface: support rails made from LOHR perforated plate + aluminium tread plate in the center + additional reinforcement with plywood underneath the loading area Corrosion protection: hot-dip galvanized construction Manual cable winch Hydraulic hand pump tilting device Single-sided hydraulic cylinder for lifting and lowering Perforations in the support rails for load securing Side-folding rear lights for easy trailer loading Jockey wheel... and much more. Gisdpfx Ajxw Dy Hjh Hsl Subject to errors and prior sale.

Year of construction: 2024, condition: used, New demonstration machine! List price: €13,585. #4152018486 Description: Durable, directly driven compressor blocks. Maximum user convenience thanks to the AIR ENERGIE CONTROL 3+ electronic control system with direction of rotation monitoring, display of operating hours, maintenance schedule, service notifications, load hours, etc. Equipped with integrated refrigeration dryer: DK 1200 SMART refrigeration dryer mounted on tank. Turnkey installation thanks to integrated dryer. Optimally adapted to actual air consumption via speed regulation. Simple operation and maximum user comfort via the user-friendly electronic control system. Giedoutux Sspfx Ah Hsl Requires minimal space thanks to compact dimensions. Significant time and cost savings in maintenance due to easy access to all service parts and direct drive. Extremely quiet operation due to sound-insulated housing. Easy installation of exhaust duct thanks to top-mounted exhaust outlet. Prevention of costly damage at start-up due to integrated direction of rotation monitoring. TIP: Screw compressors with integrated refrigeration dryer mounted on tank are extremely space-saving and guarantee high air quality. Technical data: Final compression pressure: 12.5 bar Working pressure: 5-12.5 bar Free air delivery at working pressure (ISO 1217): 270-1,224 l/min Compressor speed at 7 bar: 5,023 rpm Rated drive motor output (V/Hz): 7.5 kW (400V/50Hz) Drive motor protection class: IP 55 Sound pressure level (LPA1 DIN 45635 T13): 64 dB(A) Air outlet connection: 3/4" i Tank volume: 500 l Dimensions (W x D x H): 1935 mm x 655 mm x 1680 mm Weight: 427 kg Technical data – Refrigeration dryer DK 1200 SMART: Flow rate at pressure dew point +3°C: 1200 l/min Pressure: 7 bar Pressure loss: 0.25 bar Voltage: 230V/50Hz Power consumption: 0.23 kW Air connection: 3/4" a Refrigerant filling: R134a Location:

Condition: used, For sale are two units from Schneider & Koch: one TS-LV6 and one LV-Compact, both manufactured in 2016. Both units were in operation until recently. Gedpfxsww Enbo Ah Hsil

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Features and Technical Data: - Designed for all window tool systems up to 400 mm tool diameter - Thanks to the standard braking devices (foot brake for slot spindle, automatic electronic safety brake for saw), the machine can be stopped within a few seconds Gjdpfx Ahoxymfds Heil - The protective hoods for the slot spindle and cross-cut saw are designed so that tools can be easily and conveniently changed without having to remove the hoods themselves - The cross-cut saw can be conveniently adjusted from the operator’s position using a quick adjustment. A six-position turret allows for fast changeover to different dimensions - The 40 mm slot spindle can be precisely adjusted in height via a conveniently positioned handwheel with 0.1 mm graduations - The stable roller table, in combination with hardened and ground guides, can be moved easily with minimal effort - Slot spindle motor: 5.5 kW - Slot spindle speeds: 3000/4500 rpm - Spindle diameter: 40 mm - Clamping length: 140 mm - Slot spindle height adjustment: 100 mm - Extraction nozzle: 120 mm - Cross-cut saw motor: 2.2 kW - Cross-cut saw speed: 2950 rpm - Saw blade mount: 30 mm - Max. saw blade diameter: 400 mm - Max. cutting height: 125 mm - Pneumatic tool clamping - With Festo LAS stop Weight: approx. 600 kg Availability: short-term Location: Flörsheim

Condition: like new (used), For sale: Hydraulic Press Brake REDCNC XD-5016 III Condition: New, unopened. Manufacturer: REDCNC Machinery Model: XD-5016 III A modern upward-moving table type hydraulic press brake designed for precise sheet metal bending. The equipment is built using high-quality components sourced from manufacturers in Japan, Germany, France, and Taiwan. Technical specifications: Nominal force (pressure): 500 kN (50 tons) Working table length: 1600 mm Distance between uprights: 1220 mm Throat depth: 405 mm Stroke length: 100 mm Gjdpfx Ahoxnmcre Hoil Max. opening: 370 mm Die height adjustment: 250–255 mm Approach speed: 52 mm/s Bending speed: 8 mm/s Return speed: 46 mm/s Number of cylinders: 1 Main motor: 4.5 kW (Siemens, Germany) Precision: ≤ ±0.01 mm (mechanical), ≤ ±0.02 mm (ram) Back gauge precision: 0.15 mm/m Hydraulic system capacity: 33 L Weight: 1600 kg Dimensions (L × W × H): 1755 × 1440 × 2070 mm Features and equipment: – Upward-moving hydraulic operation principle ensures safe, reliable, and precise performance – Mechanical synchronization and roller guide system for increased accuracy – Upper beam crowning device for consistent bending precision along the entire length – CNC control with touchscreen display (Keyence Japan) – Electronic handwheel control for precise upper and lower tool positioning – Servo system (Mitsubishi Japan) ensures smooth and fast back gauge operation – Hydraulic system filled with Shell oil (USA) – Frame and cylinder components: Amada Japan – PLC Controller: Keyence Japan – Control system: NC9 Japan – Main electrical components: Schneider France, Panasonic Japan, Omron – Seals: NOK Corporation Japan Purpose: The REDCNC XD-5016 III press brake is designed for bending, forming, and fabricating sheet metal profiles. It is perfectly suited for small to medium-sized manufacturing, producing parts from steel, aluminum, copper, and other metals. Its robust frame, high-precision hydraulic system, and CNC control deliver excellent accuracy, repeatability, and performance. Advantages: – CNC control with touchscreen – Japanese and German components: Keyence, Siemens, Mitsubishi, Amada – High accuracy (±0.01 mm) – Compact size, reliable operation – Ideal for workshops with small to medium production volumes – Easy programming and simple maintenance If you have any further questions, please feel free to contact us.

Condition: used, Year of construction: 2012, functionality: fully functional, Typical Applications: - Pulled meat and poultry production - Ready meal and prepared food lines Features: - Continuous flow design for consistent output - Fiber pulling action (not cutting or tearing) for natural texture - Stainless steel construction with easy-to-clean access - Safety interlocks and easy washdown design - Compact footprint for seamless integration Make: Cove Model: SH-5 Made in USA Capacity: 794 kg/hr Hopper Feeder Height (mm): 1900 Hopper Opening (mm): 450 x 380 Giodpfox Akcrex Ah Hol Throat Opening (mm): 270 x 220 Throat/Chute (mm): 970 Discharge Height (mm): 700 Overall Dimensions: 1000 L x 630 W x 1900 H Weight: approx. 113 kg YouTube video: factory video, similar machine, not this exact unit!

Condition: new, Year of construction: 2025, Schneider compressor UNM 510-10-90 D A714000 Mobile piston compressor with horizontal tank Standard with all safety fittings and electrical connection cable with plug and Condor pressure switch Air receiver equipped with safety valve, receiver pressure gauge and condensate drain valve. Welded rear handle improves loading and transportability Fully automatic operation due to pressure switch with start-up relief, motor protection and on/off switch With upscale equipment for universal use With V-belt drive, 2 cylinders in series arrangement for particularly smooth running and 400 V three-phase motor with external motor protection Low compressor speed - thus protecting the compressor components, lowering the noise level and reducing vibrations Large fan flywheel for optimal cooling Including filter pressure reducer for regulated compressed air, cleaned from condensate, dirt and oil With 2 m rubber-coated supply line and air outlet via quick coupling Supply line with phase inverter 10 years warranty on tank against rusting through Godpfjbyhvrox Ah Heil Technical specifications Pressure 10 bar Suction capacity 510 l/min Filling capacity 390 l/min Speed 1240 min-1 Reservoir volume 90 l Weight 80 kg Noise level 97 dB(A) Dimensions (WxDxH) 1070x495x895 mm Drive power 3,0 kW Voltage 400 V Location: ex stock Bitburg subject to prior sale

Year of construction: 2023, condition: used, New demonstration unit! List price €2,986 net! Technical data: Pressure: 10 bar, Suction capacity: 650 l/min, Effective delivery rate: 520 l/min, Drive power: 4.0 kW, Speed: 1025 rpm, Tank capacity: 2 x 90 L, Weight: 175 kg, Noise level: 83 dB(A), Air outlet: 1/2" internal, Dimensions (W x D x H): 1200 x 800 x 1240 mm. Design: Belt-driven piston compressor mounted on two horizontal pressure vessels, fully assembled on a safety pan, including complete equipment. The ready-to-connect unit includes: - Pressure switch for fully automatic operation - Start-up relief and motor protection - Safety valve - Non-return valve - Pressure gauge. The belt-driven compressor unit allows all components to be clearly arranged, and components subject to maintenance can be easily removed or installed. Location: Rieth. Giedevxxvispfx Ah Hjl

Condition: good (used), Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, touch screen panel, Simatic Multi Panel, touch multi panel, touch screen -Manufacturer: Schneider Electric, Touchscreen Panel with Housing -Type: HMISTO715 -Voltage: DC 12-24V -Dimensions: 150/145/H160 mm Giedpexxvkaofx Ah Hjl -Weight: 1.4 kg

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: M-155H-005-01/05-05CT, cutting width (max.): 1,550 mm, Equipment: safety light barrier, Paper Cutting Machine Godox Ap Nqjpfx Ah Heil Type: Schneider Senator 155H Model: CT Machine Number: M-155H-005-01/05-05CT Year of manufacture: 2005

Condition: excellent (used), ElectroMashStan automatic tube rolling line. For rolling tubes up to 1.5 mm thick. Can be painted or plain. Designed for a production of 11 metres. Automatic cutting. Automatic line with 6 speeds. It has been used for the production of fence posts. Purchased new, one owner. Total length 15 metres. Giedpfoufz Rdjx Ah Hsl The line is in very good condition, little used. If you have any further questions, we will be happy to answer them.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Automatic KLT Container Washer, Tray Washer, Continuous Cleaning Machine for Various Components - Washing - Rinsing - Degreasing - Drying - 2 lanes - 2 x 600 KLT/hour - External heating - Possibility of transport, dismantling, and loading Suitable for boxes, KLT inserts, and lids – continuous throughfeed washing system. Maximum throughput width: 300 mm Maximum throughput height: 650 mm Contaminants: Dust, mineral grease, mineral oil, metal chips System Description The system and piping are made of high-quality stainless steel, ensuring a long service life. Giodpfowi Nl Iox Ah Hel The machine is a two-lane chain continuous washing system. Its unique modular design allows for expansion of an existing system at any time, guaranteeing that the plant will not become too small. The system can grow as the operation expands or as requirements increase. Hot water heating: Heat exchanger in the washing tanks for the heating circuit. Recommended supply temperature 90°C Nozzle pipes: Screwed Oil separator: Three-phase separator with pneumatic diaphragm pump and pre-filter on all tanks. Workpiece counter on both lanes. System features: - Stainless steel infeed module - Stainless steel washing module 1 - Stainless steel washing module 2 - Stainless steel cold air blower - Stainless steel warm air drying module - Stainless steel warm air drying module - Stainless steel outfeed module - Transport system - Continuously adjustable transport speed drive - Heating: Tube heat exchanger in the washing tanks - Control cabinet with electric control system - Assembly and cleaning doors on both sides of the plant - Thermal insulation of washing tanks and sound insulation of fans Technical Data: Overall dimensions: Length: 12,350 mm Width: 1,950 mm (2 lanes) Height: 2,800 mm (total height incl. fans) Electrical power for washing: Wash pumps 1: 7.50 kW 7.50 kW Wash pumps 2: 7.50 kW 7.50 kW Cold air blower: 5.50 kW 5.50 kW Warm air blower 1: 2x Warm air blower 2: 2x Warm air heating register: 4x Drive: x 0.55 kW 0.55 kW Exhaust air fan: 3.00 kW 3.00 kW Voltage: 400 V Frequency: 50 Hz Protection class: IP 55 The system control cabinet is located next to the machine. The control cabinet contains the required components for system operation and monitoring.

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Giedpovmivcofx Ah Hsl Machine is being sold as defective Without guarantee - without warranty -

Condition: ready for operation (used), A hydraulic large-format sheet metal shear Schneider is available. Width: 6020mm, bending length: 6000mm, max. sheet thickness at 6000mm: 10mm. With position display. An on-site inspection is possible. Gijdpex Elz Rjfx Ah Hjl

Condition: good (used), PLC controller, electronic modules, PLC module, plug-in card circuit board, circuit board, PCB, isolated gateway Giedpfx Aexxp Hneh Hel Manufacturer: LCL, PCB isolated gateway made of Pro-face monitor Schneider Electric GP-4301TW -Type: -Quantity: 4x circuit boards available (1x with accessories, see photos) Price: per piece -Dimensions: 130/125/H20 mm / 130/125/H25 mm -Weight: 0.1 kg / 0.3 kg

Condition: like new (used), Year of construction: 2013, functionality: limited functionality, overall weight: 100 kg, Dismantled from an unused production line, in perfect condition. Without servo motors. 3 units available. Unit price: net 9,500 EUR Gisdoxzc Iwopfx Ah Hsl

Condition: excellent (used), Table milling machine SCHNEIDER Type SK 2/4 II Giedpegk Ui Esfx Ah Hel with feed Holz-Her With sliding table

Condition: excellent (used), Year of construction: 2002, Maximum jumbo roll width 1300 mm Jumbo roll diameter max 1000 mm (1200 mm without splice table) Winding diameter max 600 mm Operating speed 300 m/min Cutting width possible from 20 mm Year of manufacture 2002 Accessories: Giodpfjxyihnox Ah Hsl - 1 unwind tension shaft D 76 mm - 2 friction winding shafts D 76 mm - 10 upper and lower knives - 1 edge guiding system - 1 cutting table - 1 extraction system for edge trims - silicone-coated guide rollers, suitable for adhesive tapes - with documentation

Condition: like new (used), Year of construction: 2011, functionality: fully functional, Universal Milling Machine Deckel FP1 repowered by FPS in year of manufacture 2010 with 3-axis digital display Heidenhain ND 780. Like new!! Gisdpfx Ahewpi Dqe Hol Technical Data: >> Machine no. 2101-51084 Year of manufacture 2011 >> Fixed angle table >> Speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 KW >> Travel range X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Hydraulic vise >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant device About the machine: A universal milling machine Deckel FP1 repowered by FPS is being offered in like-new condition. The accessories include a hydraulic vise with rotary table, collet tool holder, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to inspect and try out the Deckel on-site under power. The machine is immediately available.

Condition: used, Industrial straightening machine, stabilizer straightener, bending machine, used equipment Manufacturer: Schneider Type: Richtmaschine Stabilisator Year: 2016 Electrical Data: 400V, 16A Gisdpfexnq Dtjx Ah Hsl Overall Dimensions: Width: 1900 mm Depth: 1250 mm Height: 1660 mm

Condition: good (used), Touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, touch screen panel, Simatic Multi Panel, touch multi panel, touch screen -Manufacturer: Schneider Electric, Touchscreen Easy Panel PC, Performance 18.5" -Type: HMIPSPS952D1X01 Gjdpfsxw R I Rsx Ah Heil -Voltage: DC 12-24V -Dimensions: 470/55/H295 mm -Weight: 4.5 kg

Year of construction: 2012, condition: new, TIMKEN TAPERED ROLLER BEARINGS NP342204-90WA2 NEW NEVER USED 14 UNITS AVAILABLE WEIGHT 320 KG/ EACH PACKED INTO ORIGINAL WOODEN BOX WAREHOUSE LIQUIDATION ADDITIONAL BEARINGS AVAILABLE: 22324 EDK FAG x2 un. 71976MP.P5.UO FAG x1 23276 BMB FAG x2 23222-E1-A-K-M FAG x1 23224 HL BM S x1 F36204 FAG x3 STF374KV5051GAS3 NSK x3 2456 CPM ITALY x47 NP838887 TIMKEN x2255 R425-1G4S7 NSK x2 2TR19H C3 FP KOYO x1 31318F FERSA x165 NP942053-902-A1 TIMKEN x12 2TR19H C3 FP KOYO x1 24168-B-C3 FAG x 2 01/02/0274/C5309 x2 NNU6810 NTN x3 612833-B SKF x6 CP354256-90001 TIMKEN x2 NU2324 EC ML SKF x1 23238C E4 S11 NSK x4 2IE.083.00 x2 SL182244-BR-A INA x1 23088-K.MB.R1000.1130.J15B FAG x2 612833-B SKF x6 PRICE FOR NEGOTIATIONS Giedpfx Ahjqpd Sno Hsl