Used Restaurant Menus for sale (262)

Condition: ready for operation (used), Year of construction: 2001, pressure 100 t chamfer lenght 4100 mm distance between columns 3700 mm column arm 415 mm stroke max. 215 mm Godpfsxzuwksx Af Aobl dayligth 410 mm ajustment speed 200 mm/sec working feed 10.0 mm/sec return speed 150 mm/sec work height max. 1080 mm table width 100 mm Control CYBELEC oil volume 160 ltr. voltage 400 V power capacity 8.5 kW weight 10200 kg range L-W-H 4800 x 1800 x 2600 mm - in checked conditions - machinevideo - ?v=Phcik_oo4CE Equipment: - BEYELER electro-hydraulic CNC press brake - CNC CYBELEC control unit “DNC 1200 PS/B” * High-resolution screen * Clear, concise menus in the operator's language * Tool and product library * Swiveling control panel, front right - CNC-controlled axes (Y1+Y2-X) - CNC-controlled backgauge adjustment (X-axis) * 2x manually adjustable stop fingers - Manual upper tool clamping - Manual lower tool clamping - Rear safety device (safety door) - Side safety device (safety doors) - Bending tools * 1x set of split upper tools (ROLLERI TOP 175.26.R08) * 1x set of split 1V dies (V 12 mm) - 2x freely movable 2-hand controls - 2x freely movable foot switches - Operating instructions for control system

Condition: used, Year of construction: 1995, pressure 80.0 t chamfer lenght 2050 mm distance between columns 1550 mm column arm 250 mm table width 85.0 / 135 mm stroke ca. 390 mm dayligth ca. 585 mm ajustment speed 180 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec work height max. 1050 mm Number of working hours 32.495 h oil volume 200 l operating pressure 320 bar total power requirement 11.6 KW weight of the machine ca. 7300 kg range L-W-H 3700 x 2000 x 3000 mm Good/well-maintained condition (!!) - in checked conditions - machinevideo - ?v=IKyUmzB0WTI ----- CNC electro-hydraulic press brake with: * Increased installation height .. approx. 550 mm * Increased cylinder stroke .. approx. 390 mm ----- Gedpfx Afoxachus Asbl Features: - Robust electro-hydraulic press brake * MADE IN GERMANY (!!) - CYBELEC CNC control "DNC 904 PS-A" (SN 0332) * Pivoting, front right * High-resolution graphic display * Clear, easy-to-read menus in the operator's language * Large tool and product library * Graphic 2D programming * Automatic bending sequence calculation - CNC-controlled axis adjustment: Y1+Y2 / X / R axes - CNC electro-motorized backgauge (X axis) * With 4 manually adjustable stop fingers - CNC Electric height adjustment (R axis) - WEINBRENNER electro-hydraulic upper tool clamp - WEINBRENNER electro-hydraulic lower tool clamp - 1x freely movable 2-hand/foot control - 2x front, movable support arms - Side safety device (swinging doors) - Rear safety device (swinging doors) - Machine/control manual + circuit diagram

Condition: used, Year of construction: 1997, pressure 225 t chamfer lenght 3050 mm distance between columns 2550 mm column arm 300 mm ajustment speed 110 mm/sec work speed 9.0 mm/sec return speed 130 mm/sec work stroke 240 mm dayligth 320 - 560 mm table height 1000 mm table width 200 mm oil volume 350 ltr. operating pressure max. 296 bar air pressure 4.5 - 6.0 bar voltage 400 Volt total power requirement 18.5 kW weight 14900 kg range L-W-H 5180 x 2400 x 3100 mm - in checked condition - machine video - ?v=ebbbzSYMxKw Furnishing: - electro-hydraulic CNC die bending/press brake - CYBELEC CNC control "ModEva 12S", swiveling at the front right * High-resolution graphic color screen 14 inches Gjdpfsxaa Dtex Af Asbl * Representation as a line, area or volume drawing of the product * Clear, concise menus in the operator's language * Large tools and products library - CNC-controlled back gauge adjustment (X-axis) * Stop range X axis of bending line .. 5.0 - 1.000 mm * Adjustment speed .. max. 250 mm/sec. - CNC-controlled vertical adjustment of the stop fingers (R axis) * Adjustment range of table surface .. 115 - 265 mm * Adjustment speed .. max. 100 mm/sec. * Adjustment via SERVO motors - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2 axis) * Adjustment range Z1 .. 405 - 2565 mm * Adjustment range Z2 .. 485 - 2645 mm * Adjustment speed .. max. 1000 mm/sec. - WILA CNC-controlled electric table crowning - pneumatic EHT upper tool clamping - manual lower tool clamping - 1x freely movable 2 hand/foot control - 2x front, movable support arms - rear protective device (sliding protective grille) - side protection device (pivoting protective grille) - 1x set of EHT deer foot upper tool - split (3.000 mm) - 1x set of EHT lower tools - split (3.000 mm) - original operating instructions (machine + control)

Condition: used, Year of construction: 2015, sheet width 3080 mm plate thickness 16.0 mm thickness at "Niro-steel" 12.0 mm no. of strokes 7 - 12 Hub/min cutting angle 0.5 - 2.5 ° back stop - adjustable max. 1000 mm traversing speed 200 mm/sek down holder 14 Stück work height max. 840 mm Column width 3420 mm throat 350 mm Control D-Touch 7 oil volume 450 l voltage 400 V engine output 45.0 kW weight 18150 kg range L-W-H 4130 x 2210 x 2570 mm Good / well-maintained condition (!!) New price ~ €120.000 Special price upon request Features: Gbjdpfx Aexab Ruof Ajl - Robust electro-hydraulic sheet metal shear ("guided") - CNC control unit D-Touch 7 ("touchscreen") * Anti-reflective robust 7" color touchscreen control panel * Easy positioning to the desired size * Positioning accuracy 0.1 mm * Unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target values * Backgauge retraction function * Cutting length control via adjustable stroke length * Cut counter * Automatic machine stop when the programmed cuts are reached - CNC electro-motorized adjustable backgauge * Travel range max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - CNC electro-motorized cutting gap adjustment - CNC Electro-hydraulic cutting angle adjustment - Heavy-duty welded steel construction - Ergonomically positioned and clearly laid-out control panel - Hold-down clamp positioned close to the cutting edge - Front light barrier (instead of finger guard) - Self-regulating hold-down clamp pressure - Rear safety device (light barrier) - 1x side stop (L = 1,500 mm) - 2x support arms (L = 1,000 mm each) - Wide sheet supports with ball transfer rollers - Mobile foot switch with emergency stop function - High-quality, regrindable blades (split) - Rear sheet chute - Original operating instructions

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Technical data Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Suction nozzle 2 x Ø 120mm Infinitely variable speed control 150010000 rpm Motor power 7.5 kW (10 HP) Net weight approx. 880kg Technical description 7" touch control, can be used optionally, top and bottom 7" capacitive touchscreen, can also be operated with gloves can also be operated with gloves (e.g. with Maxi Flex) Language switching German, English, French (other languages on request) Milling cutter zero point selectable in the program, 3 reference points Simple menu structure thanks to innovative touch control (max. 2 levels) Display (work screen) for tool and program number program number, height, angle, speed and milling fence Operating hours counter Warning messages in the event of incorrect operation Remote maintenance via Internet (VPN tunnel) USB interface for data backup and importing Tool, program and user Tool database for 5 tools (20 programs possible per tool) 20 programs are possible per tool) Heavy-duty bench router with double-sided swivel-mounted, fixed built-in milling spindle for swivel range of +/- 45.5° 2-axis positioning control for height and tilt adjustment swivel adjustment Electronic position and speed displays Infinitely variable speed control 1500 10000 rpm 7.5 kW motor with 11 KW frequency converter Push button with electronic soft start Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Milling fence 301 Overall adjustment via 1 handwheel on the right-hand side, Adjustment range approx. 140 mm, dimension display, Total stop via touchscreen +/-0.1 mm, Partial stop adjustment, (chip removal) +5mm to -25mm is carried out via a star knob screw on the left side side, dimension display via one mm vernier, clamping on the machine table the machine table manually via clamping clamping screws, milling fence made of die-cast aluminum with 2 milled cast iron stop slats 500mm long with aluminum splitter tongues, maximum possible tool diameter is tool diameter is 250 mm Machine socket Lockable main switch Electronic, wear-free motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30mm with quick-release nut CE-compliant Gbedpsx N Dhdjfx Af Asl incl. - Milling fence type 301 - Cast stop plates and aluminum splitter tongues - Milling protection and pressure device GAMMA V 1629 Table pusher for table top 1100 x 760 mm Coated surfaces, for quick, convenient and tool-free tool-free adjustment to different tool diameters tool diameters up to max. 240 mm, the table insert Table insert with quick lock up to tool diameter 155 mm instead of standard table insert rings (not in conjunction connection with rotary table) - Zeromaster reference measurement setting device for exact 0-point height adjustment from the milling tool to the table top for 24 V DC - HSK-80 quick-change arbor system with spindle lock and spindle lock and milling arbor 30mm instead of milling spindle 30mm (higher concentricity and no sticking in the spindle as with the spindle as with the MK 5 system or steep taper) - Console to the

Condition: new, Year of construction: 2026, functionality: fully functional, Features: • Constructed from 304 stainless steel, ensuring robust stability. • Equipped with a food-grade conveyor belt, offering a high safety factor. • Frequency control allows for adjustable cutting sizes. • High capacity, capable of processing up to 1000 kg per hour. Leafy vegetable cutters provide numerous benefits in food processing. They are capable of swiftly and precisely cutting large quantities of leafy greens, such as lettuce, spinach, and cabbage, which greatly enhances efficiency and reduces labor. Additionally, they minimize direct human contact during operation, lowering contamination risks and meeting hygiene standards, making them particularly suitable for the food processing industry. Advantages: • High Efficiency: Can process 1000-1500 kg of leafy vegetables per Gedpfx Ajt Ivamef Aebl hour, greatly boosting production efficiency. • Adjustable Cutting Length: The cutting length can be adjusted between 1 and 50 mm to meet various requirements. • Compact Design: With dimensions of 1620 x 680 x 1240 mm, the machine is space-efficient and fits well in different production settings. • Energy Efficient: Consumes only 1.5 kW of power, leading to low energy costs and operational expenses. • Wide Voltage Compatibility: Supports 220V and 1380V, making it adaptable to different regional electrical standards. Application Fields: • Food Processing Plants: Perfect for large-scale leafy vegetable cutting, improving production efficiency. • Catering Industry: Ideal for restaurants and hotels requiring bulk vegetable cutting. • Agricultural Cooperatives: Helps farmers with primary vegetable processing, adding value to their produce. • Supermarkets and Fresh Markets: Suitable for on-site vegetable processing to enhance sales efficiency.

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 2,400 mm, total length: 3,500 mm, grinding width: 180 mm, grinding wheel diameter: 250 mm, Equipment: documentation/manual, GRAFS GR-2400e is heavy-duty straight knife grinder / vertical surface grinder with swiveling electromagnetic chuck, suitable for a broad range of industrial knives, such as guilotine knives for metal, granulator blades, veneer knives, chipper knives, planer and paper and knives HM / HSS for paper cutters. We are a sharpening shop for over 12 years. All our machines are in 100% build in GRAFS factory in Poland. TECHNICAL FEATURES / MAIN ADVANTAGES: • Mitsubishi Touch Screen operation panel HMI 7"; • Mitsubishi PLC, • Mitsubishi Inverter for carriage run adjustment / feed, • Internet communication system with GRAFS technical support in case of any problems, • Grinding wheel motor 11 kW (15 HP), 400-3-50 Hz; • Grinding wheel Ø250mm corundum in aluminum base, (segment grinding wheel upon request); • Reversal of grinding wheel rotation; • Electromagnetic chuck 180x2400 mm; Surface grinding 180x2400mm, Gedpfx Afed Tc Has Asbl • T channel on the other side of the chuck (from operator side), • Angular divisor for magnetic table rotation ±120°; • Fast grinding wheel descent and ascent (by switches) and slow approach by hand wheel; • Motorized automatic grinding wheel downfeed, controlled by Mitsubishi PLC (0.001-0.05 mm); • Automatic work cycle (roughing, sparkout); • Variable carriage speed from 1 to 16 m/min; • Coolant through 2 nozzles either side of the grinding motor; • Longitudinal grinding head angle adjustment from 0° to 5°; (flat surface grinding possibility), • External tank with pump; • Magnetic cleaner / filter MODEL MS, • Fast grinding wheel exchange system, grinding wheel adapter with 3 securing screws, • Exchangable hardened steel strips on machine body guides, 2 at the top, and 2 at the bottom of main guide. • Carriage rollers from INA, on on the regulated cam, • Heavy body of the machine (steel plates 10 mm thick), build in cell design, • Electric cabinet on Shneider components, • Secure cover of the grinding wheel with magnetic interlocks, • User manual and control panel menu in Polish / English / German / Czech / Spanish / French, • Machinery LED lamp in working area, UPON REQUEST: • Different types of knives mounting, • Coolant cleaner with automatic paper filter, • Main grinding motor can be 5.5 kW, 7.5 kW and 11 kW, • The knife sharpening machine model GRAFS GR can be supplied in 4 different grinding lengths: 1.200 mm, 1.800 mm, 2.100 mm and 2.400 mm. • Accordion covers on whole body of the machine, • Mist collector, We provide an European Declaration of Conformity and all documents. The machine is new, we are a producer from Poland, we provide after sale support and service with 12 month's warranty.

Condition: excellent (used), Year of construction: 2021, operating hours: 144 h, I will sell a water-abrasive jet cutting machine from Flow. Model Mach 100 The machine has worked 144 working hours The machine has been checked and valued by an expert from FLOW Cutting area 3x2 meters. The machine is in very good technical condition - used occasionally for own production, has only worked hours. Less than 2 tons of garnet processed. The machine is currently running and fully ready to work, it is possible to fully test it before purchase. In I have many spare parts for the device: - mixing tubes. - diamond orifices - mixing bodies - large service kit for the pump (major kit) - head covers The device has an attachment for piercing brittle materials such as glass, ceramics. Working area: Z-axis feed: 178mm Net cutting area X-axis min. 3,000 mm Godourv Nvopfx Af Ajbl Y axis min. 2,000 mm Machine accuracy: On linear axis at 20 °C +/- 3 °C - linear positioning accuracy of X and Y axes: +/- 0.10 mm/m - repeatability of X and Y axes: +/- 0.06 mm (complete working area) Circularity test: : +/- 0.013mm Machine speed - Technological speed up to 10 m/min - Maximum shape speed: up to 5 m/min - Acceleration 0.05 g Light gate The light gate prevents entry into the front, rear and side of the machine in cutting mode. - FlowMaster PC control - Simple and logical user interface - user-friendly menu structure based on pictograms - unique creation of a cutting path with the possibility of modification with automatic generation of inputs and outputs and travel routes. - exclusive SmartStream technology - Every beginner becomes a professional - Ensures high-quality parts - Dynamic language switching: operators can work with the software interface in the language of their choice without having to restart the program - Context-sensitive tool tips and integrated Help function - Simple and fast definition of edge surface quality - Feed potentiometer from 0 to 125% - Automatic calculation of working times - PASER 4 cutting head - Paser 4 abrasive metering system - Paser CF900 abrasive storage and transport system - Flow HyPlex prime 30 ultra-high pressure pump - Flow UltraPierce piercing system - Technical specifications: - Designed for 4150 bar - 3800 bar continuous working pressure - 22 kW (30 HP) motor power - Maximum water flow 3.1 l/min - Maximum temperature at inlet 21°C - Air pressure 6.2 -8.3 bar - Mains voltage 400V, 50 Hz, 3 phases - Dimensions (W x D x H): approx. 1,524 x 914 x 1,033mm - Weight: approx. 850 kg - HyPlex Prime pump cover - HyPlex Prime hydraulic pump tool kit - HyPlex Prime tool kit - High-altitude piping package In addition, you can buy the device - Polish manufacturer Airpol modek k5 compressor, power 5.5kW - DSsystem pneumatic lift with 10 suction nozzles and sheet metal peeling system, lifting capacity 1 ton - Wiessmann water treatment plant

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Gedovr Eh Espfx Af Aebl Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2024, condition: new, High productivity cabbage cutting machine S65: Cabbage cutting machine can be equipped with the transporter, cabbage destalkers, salting vat. High productivity 5000-7500 kg/h, high-quality materials as food grade stainless steel AISI 304. Can be cut whole, large cabbage heads. General Features: Godpfodv Ec Ajx Af Asbl • Productivity 5000-7500 kg/h; • High quality, longlasting stainless steel cutting knives (up to 600 tons between sharpening); • Disc diameter of 65 cm, grants, that you can put whole large cabbage heads; • The universal cutting machine, very good for slicing, short cabbage cutting; • Easy to clean, can be washed with low-pressure water; • All food contact elements made of stainless steel; • Powder painted frame, three-layer lacquer in the standard version, or full stainless steel version(picture); • Electric connection 400/220/120 Volts, 50-60 Hz. For different connections, please, ask; Mainly used by: Natural Sauerkraut, Kimchi, Salad producers Vegetable, salad producing and whole selling companies Restaurant and fast food chains Special request for machine

Condition: new, Year of construction: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traversing speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth 0–35 mm (with drill length TL 70 mm), automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER to flush glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Indicator lamp for residual glue level in glue container - 1 pc. left side stop, 1 pc. right side stop (all removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm Gedpfx Afow Sgm Hj Asbl - 1 pc. TCT controller with: Integrated industrial PC, incl. Beckhoff TwinCAT soft PLC, operating temperature range 0–50°C, 15" capacitive touchscreen TFT industrial display, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 2 working fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, plain text error diagnosis - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, art. no. 0470-0810 - 1 EASY CLEAN system, for automatic test glue shots before starting the drilling/gluing/dowel insertion program. E.C.S. for 1 pc. glue nozzle, art. no. 0471-Z010 - 1 single-spindle vertical drilling unit from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjusted via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) Art. No. 0471-0830 - 4 vertical angled clamping cylinders 10° with mount, additional, Art. no. 0470-0850 Available: short notice

Year of construction: 2011, condition: excellent (used), Wölco Lupo VPAB-53 labelling machine  Fully automatic labelling machine for professional labelling Wide-belt multi-labeler Manufacturer: Wölco Machine. Type: Lupo VPAB-53 Year 2011 Connection: 400V Current 3 x 16 A Power: 2,5 kW Air: 6 bar Wide-belt multi-labeler Wölco Lupo VPAB-36 Manufacturer: Wölco Machine. Type: Lupo VPAB-36 year 2011 Connection: 400V The Lupo VPAB-36 is the ideal machine for permanent industrial operation, if precise and variable label printing with position-accurate application is required. Sato printer S84 ex label printing system The SATO S84-ex/S86-ex printer is a very powerful, automated label printing system with a user-friendly design and a wide range of functions. This printer with its solid design is designed for continuous operation. The main functional features of the printer are: - Two-colour LCD backlight and two-colour status LED for optimised print status monitoring. Gbjdpfx Afsh N Sa Rj Ajl - Solid design for harsh environments - Very fast print throughput with a maximum print speed of 16 ips and adjustable retract speed control - Printhead can be easily replaced without tools - Newly developed sensor cover with a non-stick surface that can be easily removed and cleaned without tools - Easy upload/download to/from SD card or USB memory and without using the SATO "All In One Tool" application - Supports external printer settings via the SATO "All In One Tool" application or a web browser - Supports multi-language display menu and Asian font printing - Supports emulation in standard firmware - Supports various communication interfaces - Supports SNTP protocol Financing through our bank is also possible. komplett-konzept.leasingo.de More items - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2010, condition: good (used), Siemens Advia Centaur XP Analysis System With Siemens Healthineers services and maintenance until 02/2022 Advanced AE immunoassay technology Meet clinical needs with acridinium ester (AE) technology that provides the flexibility and sensitivity needed for new and innovative assays. Comprehensive diagnostic clarification of various disease patterns thanks to a test menu with over 70 different assays. Simplified inventory management and reduced costs by using the same ready-to-use reagents on all ADVIA Centaur analysers. Simplified operation, continuous operation All samples, reagents and consumables can be loaded and unloaded on the fly. Easier training and operation thanks to an intuitive, icon-based user interface. Less operator intervention as daily maintenance is low and the system does not need to be cleaned monthly or booted up daily. New and updated test definitions can be read in by the customer by simply scanning the 2D barcodes included in the usage information. Consistent, predictable turnaround time (TAT) and accuracy Up to 240 tests/hour for short turnaround time even during peak periods. Rapid prioritisation of emergency samples possible at any time thanks to a dedicated access (STAT port). Disposable pipetting tips prevent carry-over and contamination of samples. Automatically perform repeat and confirmatory testing for reactive hepatitis B surface antigen samples using Siemens Healthineers SMART algorithms. Direct connectivity Adapt to different sample volumes with easy connection to Aptio and VersaCell® X3 automation solutions. Efficient operation thanks to diagnostic IT including CentraLink® data management system Atellica Process Manager and Smart Remote Services for Diagnostics Direct pipetting from the automation solution through point-in-space technology. Shorter turnaround times for emergency samples thanks to a dedicated STAT port that allows front loading of emergency samples even when connected to an automation solution. Technical specifications Product specifications System type: Random access immunoassay system Throughput: Up to 240 tests per hour Time to first test result 18 minutes, further results every 15 seconds (method dependent) Method capacity on board: 30 test methods Indication groups§§ Allergy, anaemia, diabetes, fertility, hepatitis, HIV, immunosuppressants, infectious serology, cardiology, Bone metabolism, Liver fibrosis, Adrenal function, Oncology, Thyroid diseases, Sepsis, Therapeutic drug monitoring (TDM) Continuous operation Loading and unloading of samples and consumables at any time during continuous operation. This includes sample racks, emergency samples, reagents, ancillary reagents, reaction cuvettes, sample tips, calibrators, controls, wash solutions, water and waste. Gedpfx Ashr Rw Ijf Aobl Samples and sample management: Sample tubes 3 ml, 5 ml, 7 ml and 10 ml tubes, 1 ml and 2 ml secondary tubes, micro tubes Financing through our bank is also available. komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), functionality: fully functional, overall weight: 45 kg, input voltage: 230 V, VITO XS Vacuum Filtration System The ideal frying oil management solution for commercial kitchens and bakeries The VITO XS frying oil filter is the perfect solution for businesses with larger fryers. With its 40-liter tank and unique vacuum filtration system, it enables efficient and hygienic handling of frying oil in your kitchen. All benefits at a glance: Save up to 50% on frying oil Ensure optimal oil quality Reduce labor Ensure maximum safety in the workplace A sustainable solution Digital monitoring via VITOconnect Easy and hygienic transport in the kitchen The X-Series operates according to a simple principle with a focus on oil conservation and safety: The device creates a vacuum and draws the used frying oil through a hose into a closed tank. Since the hot oil is not drained, a safe working environment is created around the fryer. During this innovative oil removal process, the frying medium is passed through an environmentally friendly filter pad. This ensures very fine microfiltration without the use of chemicals or additives. By removing the finest food residue and carbon particles, oil savings of up to 50% are achieved. After emptying, the fryer can be thoroughly cleaned while the oil is stored in the VITO X filter system. After the filtration process, the frying medium is pumped back. The result? Clean oil for a delicious fried product and a satisfied, satisfied customer. Technical Specifications Normal Use: Ideal for restaurants and bakeries or high frying volumes Filter capacity: up to 30 l/min (66 lbs/min) Filtration efficiency: up to 5 µm / 200 µin Pump capacity: up to 35 l/min (77 lbs/min) Tank volume: 40 l / 73 lbs Particle capacity: 10.7 kg Weight: 45 kg / 99 lbs Temperature: max. 200°C / 392°F Material: 1.4301 stainless steel Electrical connection: 1N/PE / 220 - 240 volts / 50 Hz - 60 Hz External dimensions W x D x H: 553 mm x 551 mm x 679.50 mm Lance available optionally (not included) Financing through our bank is also possible. Gjdpov Hz Svsfx Af Aebl komplett-konzept.leasingo.de Other items - new and used - can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Cooler KUBA Type: SGBE 63-F62 Cooling capacity: 33.3 kW at DT8, 26.6 kW at DT7 Air flow: 16 800 m3/h Surface: 195 m2 Fin spinning: 7 mm Electric heating Fans: 2 x 630 mm Dimensions: 3020 x 850 x 1000 Refrigerant: Freon Volume: 45 L Gbodpfx Ajh Atf Ijf Ajl Pieces in stock: 5 Stock number: CH 328 Condition: Used We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: good (used), Viessmann cooling/freezing chamber External dimensions: 5700 x 3000 x 2450 mm Internal dimensions: 5420 x 2700 x 2150 mm Plate thickness: 150 mm Stock status: 1 piece The chamber is easy to assemble Aggregate and cooler included Gbodsiauifspfx Af Ajl We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: ready for operation (used), Bitzer compressor unit Type: 4JE-13Y-40P (x3) Flow: 63.5 m3 / h (x3) Cooling capacity: 60 kW at -10 ° C / 40 ° C, 25.8 kW at -25 ° C / 40 ° C Refrigerant: R134a Year of production: 2010 Stock status: 1 team Gedsh Dir Nopfx Af Aebl Stock number: Z4 Condition: Used The device operated on the R134a refrigerant We have a condenser and a cooler to the set. We have a lot of refrigeration equipment. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: ready for operation (used), Bitzer compressors unit Type: 2 x HSK 6461-60, 2 x HSK 7451-70 Volume: 2 x 165 m3/h, 2 x 192 m3/h Cooling capacity: 620 kW at 0°C/40°C, 520 kW at -5°C/40°C, 420 kW at -10°C/40°C Refrigerant: R404A Dimensions: 4300 x 1200 x 1500 mm Pieces in stock: 1 Gbsdpfx Aoinbn Usf Asl Reference number: Z39 Condition: Used in good condition We have a lot of refrigeration equipment. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: ready for operation (used), Bitzer refrigerant compressors unit Gbjdpolrwa Ujfx Af Ael Type: 7 x 6H-25.2Y, 1 x 6HE-28Y-40P Volume: 7 x 110.5 m3/h, 1 x 111 m3/h Cooling capacity R404A: 500 kW at -10°C/40°C, 260 kW at -25°C/40°C, 104 kW at -40°C/40°C Reference number: Z49 Pieces in stock: 1 Condition: Used We have condenser and coolers for set. We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: ready for operation (used), Bitzer refrigerant compressors unit Type: HSK7471-90-40P (x3) Volume: 250 m3/h (x3) Cooling capacity for R404A: 531 kW at -5°C/40°C, 435 kW at -10°C/40°C, 280 kW at -20°C/40°C Dimensions: 4500 x 1200 x 2300 mm Condenser Thermofin Type: X-TCH 100.1-26-B-N(D5) Gsdpjpgy Ixsfx Af Aebl Cooling capacity: 1103 / 997 KW Air flow: 354 000 / 281 000 m3/h Number of fans: 12 x 1000 mm Dimensions: 11 800 x 2300 x 1600 mm Volume: 276 L Weight: 2 400 kg Control panel Dimensions: 2400 x 600 x 2000 mm We have a lot of refrigeration equipment. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: ready for operation (used), Refrigerant compressors system Bitzer Type: HSK 6461-60 (x3) Volume: 165 m3/h (x3) Gedpfx Aepwhdqof Aebl Cooling capacity for R404A: 351 kW at -5°C/40°C, 287 kW at -10°C/40°C, 185 kW at -20°C/40°C Dimensions: 3500x1000x2150 mm Items in magazine: 2 Reference number: Z64 Condition: Used in good condition We have a lot of refrigeration equipment. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: ready for operation (used), Compressor Bitzer Type: 60-70.2 Volume: 219.1 m3/h Cooling capacity: 143 kW at -5°C/40°C, 118 kW at -10°C/40°C, 77 kW at -20°C/40°C R404A Pieces in stock: 3 Reference number: S 75 Godeh Dht Dopfx Af Aebl Condition: Used in good condition We have a lot of refrigeration equipment. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: ready for operation (used), Cooler Guntner Type: S-GGN 066C/27 Cooling capacity: 40 kW at DT8 Fin spinning: 7 mm Place for electric heaters Fans: 2 x 660 mm Rpm: 870/650 Dimensions: 3050 x 700 x 1100 mm Refrigerant: Glycol Volume: 54.8 L Weight: 275 kg Godpohz T Igofx Af Aobl Pieces in stock: 4 Reference number: CH259 Condition: Used We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: ready for operation (used), Bitzer refrigerant compressors unit Type: HSK7461-80-40P (x3) Volume: 220 m3/h (x3) Cooling capacity for R404A: 560 kW at - 5°C/40°C, 477 kW at -10°C/40°C, 338 kW at -20°C/40°C Gbsdpfxjpgzhuo Af Ajl Dimensions: 4500 x 1200 x 2300 mm Condenser Thermofin Type: X-TCH 100.1-25-B-N(D5/S5) Cooling capacity: 963/852 KW Air flow: 295 000 / 234 000 m3/h Number of fans: 10 x 1000 mm Dimensions: 9800 x 2300 x 1600 mm Volume: 229.3 L Weight: 1 929 kg Control panel Dimensions: 2400 x 600 x 2000 mm We have a lot of refrigeration equipment. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: ready for operation (used), Compressor COPELAND Gjdpsiba Rdefx Af Asbl Type: D8DH1-500X-BWM/D Volume: 151 m3/h Cooling capacity: 103 kW at -5°C/40°C 85 kW at -10°C/40°C, 44 kW at -25°C/40°C Refrigerant: R404A Pieces in stock: 6 Weight: 350 kg Reference number: S 117 Condition: Used in good condition We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.