Used Rivet Press For Brake Pads for sale (32,448)

Year of construction: 1985, condition: used, Max. pressing force: 150t, bending length: 4050mm, backgauge: 750mm, control: Cybelec CNC 7200 P, weight: approx. 15t. Equipped with hydraulic tool clamping, crowning system, height-programmable backgauge, two control panels and two pneumatic bending aids. Including stand with various upper tools and dies as well as various special accessories manufactured in-house. Documentation available. An on-site inspection is possible. Lredpezx Ehbefx Ab Ust

Condition: excellent (used), Year of construction: 2010, Model Amada HFE M2 103t x 3110 3m, 8 axis Press Brake Year 2010 Very low hours Tonnage 100 tonnes Max. Bend Length 3110 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power Weight 6600 Kg Feissler machine mounted Laser guards ,side and rear interlocked fencing Dimensions Machine Length 4535 mm Ljdezb Eg Rjpfx Ab Usrt Machine Depth 2580 mm Machine Height 2680 mm Distance Between Side Frames 2705mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: used, Year of construction: 1998, Used 2500 mm bending machine by Safan Lrodpszvyg Hjfx Ab Uot Type: SMK 50 2550 TS1 Capacity: 2550 x 50 tons TS1 CNC control Y1, Y2, X, R, Z1 and Z2 Year of manufacture: 1998

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Durma CNC pressbrake Model CNC HAP 30160 Year : 2005 Capacity : 3050 mm. x 160 ton Control : Cybelec 3 axis (Y1 - Y2 - X) Last service and security control : July 2026 Equipment.... -Lots of bending tools -Crowning -Front arms sideway adjustable -Foot pedal Lodpszuvxpefx Ab Uert

Condition: new, Year of construction: 2026, machine/vehicle number: TO5_6, functionality: fully functional, operating hours: 1 h, power: 3 kW (4.08 HP), stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, overall weight: 375 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 350 mm, bending force (max.): 5 t, warranty duration: 36 months, control type: CNC control, degree of automation: manual, back gauge adjustment: CNC-controlled, number of axes: 2, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Pressing force: 5T Bending length: 350mm Spindles: 1 x 5T Control: TC15-2D graphic Backgauge: 1-axis controlled X-axis - R-axis manual Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included Lodpfx Aez A U H Eeb Ujrt 36-month warranty after installation Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: used, Year of construction: 1994, CNC press brake Manufacturer: Blemas Type: 100-33 Year of manufacture: 1994 Lredpsyvfklsfx Ab Uet CNC control: Cybelec DNC 74 PSG Pressing force: 100 tons Working width: 3 m Weight approx.: 8 tons Dimensions approx.: 3,600 x 1,600 x 2,600 mm 21926

Condition: used, Year of construction: 1994, total length: 3,400 mm, total width: 1,800 mm, total height: 2,600 mm, Colour: Grey Weight: 10.400 kg Price: On request Lodpfx Ajybdtcob Uert - Year: 1994 - Documentation available: No - CE certificate present: No - Serial number: 1776 - Drive system: Conventional - Power [kW]: 22.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 220 - Max. working width [mm]: 3050 - Column gap [mm]: 2620 - Backgauge depth [mm]: 800 - Max. stroke [mm]: 240 - Crowning system: None - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Digital readout - Transport dimensions: 3400mm x 1800mm x 2600mm (l x w x h) - Transport weight [kg]: 10400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2004, Used Safan E Brake press brake Type: E Brake 50 2050 HS TS1 Capacity: 2050 x 50 ton WIla clamping with 1 set of tools TS1 CNC control Lrjdpsyykk Hefx Ab Ujt Y1, Y2, X, R, Z1 and Z2 CNC controlled HS High Speed version

Condition: excellent (used), Year of construction: 1996, Technical specifications: Working length: 8050 mm Frame spacing: 7550 mm Press force: 340 tons Lrjdpoz Abpvefx Ab Uet CNC control: DELEM 21e with Cybtouch 15 Controlled axes: Y1/Y2; X1/X2 Stroke: 300 mm Distance table – ram: 500 mm Overhang: 300 mm Table height: 800 mm Motor power: 30 kW CE marking In-floor machine Dimensions (length x width x height): approx. 8400 x 2200 x 3860 mm Weight: approx. 56 tons Accessories: various tools Condition: overall very good condition The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Year of construction: 1984, condition: ready for operation (used), Press force: 200t, working length: 3550mm, distance between columns: 3050mm, length: 4000mm, width: 2000mm, height: 3000mm, weight: 16t. The machine is fully functional and in good technical condition. Upper tools are included. The lower tool, consisting of the die block or prism, is missing. An on-site inspection is possible. Lrjdpfxjzrn H Hj Ab Ujt

Condition: new, Year of construction: 2026, Cormak press brakes are advanced devices that enable precise bending of sheet metal thanks to appropriately selected punches and dies. Our offer includes models equipped with DELEM DA-53TX controllers as standard and optionally DELEM DA53T, DA-58T, DA-66T, DA69T and CYBELEC 12 controllers, which provide a wide range of functions, enabling the implementation of the most demanding bending tasks. Main Features: Front supports: 2 pieces on linear guides, ensuring stability during bending operations Y1, Y2 axis adjustment: automatic Rear stop adjustment (X axis): servo drive on encoders R axis adjustment: servo drive on encoders Automatic adjustment of the deflection arrow Double-sided punch mounting: quick assembly type AMADA, enabling quick tool changes Technical parameters Max. thickness of bent sheet metal (S235) up to 6.0 mm Nominal pressure 1300 kN Maximum length of bent sheet metal 3200 mm Depth of cut in beams (throat) 320 mm Maximum stroke of moving beam 120 mm Maximum opening height 390 mm Distance between beams 2700 mm Rear bumper departure 600 mm Engine power 9.5 kW Length 3870 mm Width 1550 mm Height 2460 mm Weight 7400 kg *An offline workstation license (for creating bending sequences on a PC) is available as optional equipment! The price includes: Electric deflection arrow – €2,380 Supports on linear guides – €480 Hydraulic oil – €440 Lsdpfeuw Ri Aex Ab Uort

Condition: new, Year of construction: 2026, Cormak press brakes are advanced devices that enable precise bending of sheet metal thanks to appropriately selected punches and dies. Our offer includes models equipped with DELEM DA-53TX controllers as standard and optionally DELEM DA53T, DA-58T, DA-66T, DA69T and CYBELEC 12 controllers, which provide a wide range of functions that allow for the implementation of the most demanding bending tasks. Dkeb A D Nwouw Ri Asw Aon Main Features: Front supports: 2 pieces on linear guides, ensuring stability during bending operations Y1, Y2 axis adjustment: automatic Back stop adjustment (X axis): servo drive on encoders R axis adjustment: servo drive on encoders Automatic adjustment of the deflection arrow Double-sided punch mounting: quick assembly type AMADA, enabling quick tool changes Technical parameters Max. thickness of bent sheet metal (S235) up to 6.0 mm Nominal pressure 1700 kN Lrjdjuw Scdopfx Ab Ust Maximum length of bent sheet metal 3200 mm Depth of cut in beams (throat) 320 mm Maximum stroke of moving beam 120 mm Maximum opening height 390 mm Distance between beams 2700 mm Rear bumper departure 600 mm Engine power 9.5 kW Length 3870 mm Width 1550 mm Height 2460 mm Weight 7400 kg *An offline workstation license (for creating bending sequences on a PC) is available as optional equipment! The price includes: Electric deflection arrow – €2,380 Supports on linear guides – €480 Hydraulic oil – €440

Condition: used, Year of construction: 1993, Used 3 meter CNC press brake by Safan Model: CNCL 80 3100 Capacity: 3100 x 80 tons Y1, Y2, and X axes CNC controlled Lredpoy Nydzefx Ab Ust CNC crowning Flat pressure table Year of manufacture: 1993

Condition: new, Year of construction: 2026, pressing force: 220 t, Equipment: documentation/manual, safety light barrier, New, immediately available, top-spec CNC press brake YAWEI PBH220/3100-7C - Pressing force: 2200 kN - Max. bending length: 3100 mm - Year of manufacture: 2026 Lrodpfx Abszyafks Ujt - CNC-controlled hydraulic crowning - Cybelec DELEM DA66 control system - WILA upper tool clamping - Controlled axes: X, R, Y1/Y2, Z1/Z2, Delta X - Servo bending aid (up to 200 kg) - 60 mm table with 13.5 mm x 22 mm slot for insert dies - 2 front support arms, adjustable on linear guides - CE compliant with Fiessler AKAS IIF (automatic height adjustment) - 24-month warranty - Commissioning and training included

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed Ljdpomck Ryofx Ab Uert - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: good (used), Year of construction: 2000, RAS 73.30 Flexibend CNC bending machine / swiveling bending machine. The machine is equipped with segmented tooling and a quick-clamping system. Manufacturer: RAS Model: 73.30 Flexibend Year of manufacture: 2000 Working bending length: 3200 mm Max. sheet thickness: 3.0 mm Opening height of the top beam: 300 mm Motor power: 4.5 kW Dimensions (L × W × H): 4300 × 2300 × 1750 mm Weight: approx. 4.4 tons Control: FlexiBend 5000 CNC-controlled rear stop: 10–1550 mm Automatic adjustment of the lower blade on the bending beam Two control pedals Segmented upper blades, height 155 mm Lrsdpfszz A Nusx Ab Uot Do you have any questions? Please feel free to contact us.

Condition: used, Year of construction: 2007, Bystronic AFM EP 31-160 - CNC press brake Bending length: 3100 mm Capacity: 160 t - Cybelec DNC 880S CNC control system - Controlled axes: Y1, Y2, X, R Lrodpfjziduzox Ab Ust - Laser safety device - Hydraulic crowning - Air bending - Including many tools - Including operating manual - Operating hours: 7266 - Number of bends performed: 315673 - Year of manufacture: 2007 Technical data - Capacity: 160 t - Table length: 3150 mm - Work table width: 60 mm - Working height: 920 mm - Distance between side frames: 2450 mm - Overhang: 300 mm - Opening height: 465 mm - Number of cylinders: 2 - Stroke length: 200 mm - Approach speed: 100 mm/s - Bending speed: 9.8 mm/s - Retraction speed: 95 mm/s - Tilting of the upper bending beam: +/- 13 mm - Crowning: Hydraulic - Air bending: Yes - Adjustment of the upper tool: Manual - Adjustment of the die: Manual - Number of fingers on the slide: 2 - X-axis range of the slide: 600 mm - X-axis travel: 600 mm - Min. X-axis travel speed: 400 mm/s - R-axis travel: 150 mm - R-axis rapid traverse: 150 mm/s - Z1-Z2 travel: 2400 mm - Z1-Z2 rapid traverse: Manual - Accuracy of the X-axis: 0.1 mm - Accuracy of the Y-axis: 0.01 mm - Accuracy of R-Z1-Z2: 0.1 mm - Accuracy of Z1-Z2: Manual - Floor-standing installation: Yes - Machine dimensions WxHxD: 4100 x 2680 x 2200 mm - Motor power: 15 kW - Machine weight: 9400 kg

Year of construction: 1991, condition: ready for operation (used), Hydraulic CNC press brake EHT for sale. Press force: 1100kN, bending length: 3050mm, min./max. table-ram distance: 280mm/600mm, rapid approach speed: 100mm/s, working speed: 2mm/s-8mm/s, return speed: 100mm/s, backgauge adjustment range: 5-1000mm, backgauge adjustment speed: 200mm/s, backgauge vertical adjustment: +/-10mm, safety distance between tooling and operating elements: 120mm, stopping time: 75ms, stopping distance: 11mm, Control system: DAK 90. Machine weight: 8500kg. Documentation available. Inspection by appointment possible. Lodpfxezkvk Ds Ab Uert

Condition: used, Bystronic Xpert 250x4100 - CNC Press Brake Bending length: 4100 mm Capacity: 250 t - Bystronic 2D and 3D graphics control, ergonomic operating terminal with 15-inch color monitor - 8 axes (Y1, Y2, X, R, Z1, Z2, A1, A2) - AKAS laser safety device, manually adjustable in height - Hydraulic crowning - Air bending - Radius bending - Without tooling - Includes operating manual - Year of manufacture: 2007 Technical data - Press force: 2500 kN - Bending length: 4100 mm Lrodpfx Aezizybob Ust - Standard stroke: 265 mm - Installed height (clearance between lower and upper beam): 550 mm - Distance between side supports: 3750 mm - Overhang: 400 mm - Back gauge area: 1050 mm - X-axis travel: 590 mm - X-axis speed: 500 mm/s - R-axis travel: 250 mm - R-axis speed: 150 mm/s - Z-axis speed: 1000 mm/s - Z-axis speed (6 axes): 500 mm/s - Y-rapid traverse: 190 mm/s - Y-working speed: 1 - 10 mm/s - Y-working speed for robot operation: 1 - 12 mm/s - Y-return speed: 150 mm/s - Crowning: hydraulic - Adjustable support arms: 750 mm - Maximum surface pressure without wear strip: 100 N/mm2 - Maximum surface pressure with wear strip: 120 N/mm2 - Oil capacity (tank volume): 610 l - Noise emissions: 74 dB(A) - Main motor power: 22 kW - Voltage: 3x 400 V / 50/60 Hz - Transport dimensions WxHxD: 5200 x 3200 x 2100 mm - Weight: 19200 kg

Condition: new, Year of construction: 2026, Cormak press brakes are advanced devices that enable precise bending of sheet metal thanks to appropriately selected punches and dies. Our offer includes models equipped with DELEM DA-53TX controllers as standard and optionally DELEM DA53T, DA-58T, DA-66T, DA69T and CYBELEC 12 controllers, which provide a wide range of functions that allow for the implementation of the most demanding bending tasks. Main Features: Front supports: 2 pieces, ensuring stability during bending operations X-axis AUTOMATIC SERVO Axes Y1, Y2, – AUTOMATIC (optional SERVO motor) R-axis – Automatic SERVO Automatic adjustment / compensation of the deflection arrow Front support on linear guides As standard, the machine is equipped with hardened, divided punches and 4V (42CrMo) dies Machine Description Ultimate press brakes are an advanced tool used in the industry for edge processing and bending materials. It is a versatile device that allows precise and effective finishing of edges of various types of materials, such as steel, aluminum and plastics. Ultimate press brakes have been designed with efficiency and reliability in mind. It is equipped with a solid structure that ensures stability during operation. The machines also have advanced control systems that allow programming of various operating parameters, such as edge speed, bending angle and pressure force. One of the main advantages of the Ultimate press brakes is their ease of use. The intuitive user interface allows the operator to easily program and control the machining process. Additionally, the presses are equipped with advanced safety systems that ensure safe use. Thanks to their high performance, the EASY press brakes are the ideal solution for manufacturers who require fast and precise edge processing. It can be used in various industries, such as the metal industry, carpentry, furniture production and the plastics industry. Technical parameters Max. thickness of bent sheet metal (S235) up to 6.0 mm Nominal pressure 1300 kN Maximum length of bent sheet metal 3200 mm Depth of cut in beams (throat) 550 mm (option 620mm) Lredpfx Abouwqbxo Ujt Maximum stroke of moving beam 200 mm (option 300mm or 400mm) Maximum opening height 390 mm Distance between beams 2700 mm Rear bumper departure 650 mm (option 1000mm) SERVO motor power 7.5 kW Length 3870 mm Width 1600 mm Height 2600 mm Weight 7500 kg *An offline workstation license (for creating bending sequences on a PC) is available as optional equipment! The price includes: Electric deflection arrow – €2,380 Supports on linear guides – €480 Hydraulic oil – €440

Condition: good (used), Year of construction: 2012, Used 3-meter CNC press brake from Amada Type: HD 1003 NT Capacity: 3100 x 100 tons Year of manufacture: 2012 Lredpfx Aezd S A Njb Ujt Servo-hydraulically controlled AMNC control system X1, X2, R, Z1, and Z2 CNC controlled Akas Fiesller laser safety system

Condition: used, gebraucht 080242 prompt, Zwischenverkauf v Italien 1890 € 1 Upper tool 1033/28°/R 0,6/8 mm 4 x 835mm Lower tool 3000/U 8 mm 3 x 835 mm + 1 x 400 mm Lsdjz Afcmspfx Ab Usrt

Year of construction: 1994, condition: used, Pressing force: 2250kN, max. working length: 4100mm, approach speed: approx. 150mm/s, max. working speed: 10mm/s, max. ram stroke: approx. 215mm, max. throat depth: approx. 380mm, distance between uprights: approx. 3600mm, table width: 100mm, working height: approx. 1080mm. Machine dimensions: approx. 5100mm/2000mm/3000mm, machine weight: approx. 15.5t. An on-site inspection is possible. Lredpfx Abjzun T Ee Ust

Condition: good (used), Year of construction: 2018, CNC press brake Manufacturer: SMD Yawei Lrsdpfx Ajrivu Sob Uet Type: PBB-630/6200 Year of manufacture: 2018 CNC control: CYBELEC ModEva 15 Press force: 6,300 kN Working width approx. 6,200 mm DSP Laser TX Connection power: 400 V / 95 kVA 21926

Condition: ready for operation (used), Year of construction: 1992, Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm. Lodpfswcz Axsx Ab Ujrt