Used Rivet for sale (106)

Condition: used, tank capacity: 50,000 l, GENERAL Design: upright Remarks: exact dimensions may vary slightly; the riveted insulation is damaged in some areas (see images); the base of the tank is filled with concrete External diameter: 3,100 mm Cgedpfeyckptox Abcen Total height: 9,000 mm Insulation: present Location: outdoor storage Volume: 50,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: vapor condensate tank (dairy) INSULATION Insulation jacket: riveted EQUIPMENT Manhole / dome: in the cylinder Note: slight residues

Condition: used, tank capacity: 1,250 l, GENERAL INFORMATION Equipment: Spray head Design: upright Remarks: Minor differences in the design of the two tanks; dents in the insulation shell of the lower bottom; one tank also has a dent in the insulation shell in the cylindrical area (the spray head is also missing from this tank) External diameter: 1,350 mm Internal diameter: 1,240 mm Total height: 1,750 mm Insulation: present Location: Bremen Volume: 1,250 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,000 mm Last use: CIP tanks in the pharmaceutical industry TANK Support type: Height-adjustable feet Number of feet: 3 units Cgjdpsyci Ibofx Abcen INSULATION Insulation shell: riveted Insulation shell material: stainless steel EQUIPMENT Manway/Dome: in top head (DN 400) Outlet: DN50 DIN 11851 Remark: minor residues MATERIAL SPECIFICATION Feet material: stainless steel

Condition: good (used), Hang 101-50 Eyeletting machine The machine is in perfect condition and ready to use. Technical specifications: 1 eyeletting head (Hang 271 rivet, hole diameter approx. 6mm) Maximum capacity: 20 sheets 230V power supply Front and side margins Operation: foot pedal or hand switch. Cgodpfx Abox N I Rpscjn The machine punches and crimps the eyelet in a single pass. Automatic eyelet feeding.

Condition: used, Year of construction: 1966, shaft length 15 - 130 mm wire diameter 6 - 12 mm Csdpfx Absv Sva Escogn length of wire blank max. 170 mm capacity/output with closed mould, adjustable 100 /min capacity/output with open mould, adjustable 67 /min Weight 12,5 t dimensions of the machine (WxDxH) 2,3 x 4,0 x 1,6 m combined double-pressure cold header press for jaws and closed moulds maximum wire diameter for high tensile bolts und carriage bolts 10 mm maximum wire diameter for mild steel bolts and rivets 12 mm wire diameter range 6 - 12 mm minimum and maximum shaft length 15 - 130 mm maximum length of wire blank 170 mm capacity/output with closed mould, adjustable - 100 St/min capacity/output with open mould - 67 St/min power requirement 15,0 kW mould dimensions - jaw dimensions 54 x 54 mm

Condition: good (used), Hang 87F 3-Head Eyeletter with Extraction Cgsdpfxox Ncu Aj Abcen Manufacturer: Hang Germany Very good condition, recently serviced. The machine is used for setting eyelets. Three eyeletting heads with adjustable spacing and the ability to deactivate a specific head. Installed waste extraction system immediately after eyeletting. Cardboard thickness: 0.2-4 mm Throat depth: 300 mm Head spacing: adjustable from 70-320 mm Cycle time: 0.5 s The machine uses Hang No. 272 ​​rivets. Weight: 570 kg Power supply: 380 V The cycle is initiated by a foot pedal. Eyelets included.

Condition: good (used), Year of construction: 1970, Brand HILGELAND Type CH 5 ALL Codpfx Aju Szucebcsgn Year of build 1970 Serial number 5282 Electric connection 380V Dimension l 5500mm Dimension w 2200mm Dimension h 1900mm (screw and rivet), capacity : M6 - M14, cutting length max. 200mm, variable speed: ... up to pieces 90 p/min, diameter 16mm

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm Cgedpfxju Icxqs Abcjn stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets *

Condition: used, Technical details: shaft length: max. 30 mm capacity: 600 ST/min wire diameter max.: 5 mm working dimensions: 30 mm dimensions electric cabinet LxWxH: 1,45x0,55x2,1 m dimensions of machine: 2,95x1,5x2,15 m dimensions of coil: 1,15x1,15x1,15 m Orbital Cold Forming Machine! - Not not suitable for screw production!!!!! - mechanic cold flow press / machine is unused!!!! - Steel core bullets - Rivets (almost all types: flat rivets, punch rivets, precision rivets, flat head rivets, etc. -----à not for manufacturing semi-hollow rivets, because you will need 2 forming stages, model KEPK - 1 however only has 1 forming stage. - bolts - Pins, chain pins (short) - Lead sheath-weighting for bullets (with straight frames front and rear) - plant like new / never used! accessories: - coil, manual Machine can be demonstrated under power. Please send us your enquiry what you are going to manufacture with that machine. You can also send us a drawing in order to check it if it is possible. * Cjdpfx Aou Nfrcsbcogn

Year of construction: 1999, condition: used, hydraulic lockbolt rivet gun, rivet gun, blind rivet gun -hydraulic lockbolt rivet gun -without: storage container -incl.: hydraulic unit and control -Dimensions: 1230/800/H1300 mm Cgjdpfx Aodlw Dtjbcen -Weight: 450 kg

Year of construction: 2006, condition: used, Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench, rivet gun, rivet gun, blind rivet gun, -Drive: torque module for Hilok assembly -Torque: adjustable via touch screen -Number of press-in cylinders: 1 piece Cedpfx Abjfw Rwmocsgn -Number of helical gears: 1 piece -Working platform: 800 x 500 mm -Travel: Y 400 mm, X 955 mm -Dimensions: 1555/1470/H2110 mm -Weight: 794 kg

Condition: good (used), Pneumatic rivet gun, rivet nut pliers, blind rivet nut clamp, pneumatic riveting tool, blind rivet gun, blind rivet -Compressed air rivet gun -Application range: 2.0 to 4.0 mm -Dimensions: 275/80/H220 mm Codpfxegzhxtj Abcsgn -Weight: 1.3 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Pneumohydraulic, Pneumatic and hydraulic Presses 0,2T–50T – Efficient, Cost-Effective, and EU-Compliant! We offer high-quality pneumohydraulic presses with a pressure range from 0,2T to 50T, combining high efficiency, energy savings, and maximum workplace safety. Our machines fully comply with all EU regulations, including the Machinery Directive 2006/42/EC, and come with complete technical documentation and a CE Declaration of Conformity. Key Features of Our Presses: ✅ Powerful and precise – smooth operation with advanced pneumohydraulic technology ✅ Energy-efficient – lower energy consumption compared to traditional hydraulic presses ✅ Enhanced safety – customizable safety features (light curtains, protective covers, two-hand control) ✅ Flexible control systems – available in manual, semi-automatic, or fully automatic configurations ✅ Tailor-made solutions – we design and manufacture presses according to your specific requirements ✅ Versatile applications – ideal for stamping, punching, assembling, riveting, and bending ✅ Robust construction – built for durability and reliable operation in demanding conditions ✅ Complete documentation – each press is delivered with an operating manual, technical diagrams, and a CE declaration Our pneumohydraulic presses are the perfect solution for European industries, offering high productivity, safety, and full compliance with EU standards. 📞 Contact us today for a customized offer tailored to your needs! Cgsdpfxov Snixj Abcsn 📩 Feel free to contact us via email

Condition: new, machine/vehicle number: c13a96854ea37997845c1bf36, empty load weight: 6,860 kg, maximum load weight: 28,140 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 235/75 17,5, Further information Chassis saddle forwarding Fine-grained steel welded construction, fifth wheel plate with replaceable 2 king pins Suspension strip for feeder ramps on the rear extension across the entire width, outer edge chamfered to prevent damage. Frame in reinforced design for vehicle loading (up to outer frame) Outer frame with Load-Lock profile approx. every 400 mm, for lashing strap attachment 10 pairs of lashing mushrooms embedded in the top/outside of the outer frame, 10 tons each, starting from the neck area 24 t. 2-speed support winch, single-side operation, with straight connecting plate 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Sheet metal as splash guard riveted to the floor at the bottom, in the neck area above the axle of the SZM and above the axle unit Half-shell mudguards with anti-spray flaps according to EG Container locking, 4 pairs of locking cut-outs embedded in the floor for 2 x 20 foot or 1 x 40 foot containers, 4 pairs of container locking adapters, (additional cross support required at the front and rear of the container, the container must rest evenly across the width in conjunction with the locks, cross supports are not included in the scope of delivery) Caution! Damage to the Lohrblech floor by the cross supports possible! Mechanical rear extension with hand crank, can be extended by approx. 1,500 mm, can be locked every 500 mm, incl. extendable underride guard with lighting, (then no access ladder at the rear) Covered with Lohr plate in the tramline area, steel checker plate in the middle. Attention! Ramp loading via rear only possible with rear extension in retracted position! Storage space for access ramps integrated in rear extension, can only be used if rear extension is extended 1000 mm - then excess length For transporting the ramps with the rear extension retracted - Storage space for ramps in FR on the right in front of the axles 1 pair of ramps 3,000 mm long, 300 mm wide, load capacity per pair 6,000 kg, (suspension bar for ramps on rear extension) Rear sloping to approx. 500 mm Electric cable winch, 24 volt, pulling force approx. 8165 kg, mounted centrally at the front, operation with radio remote control, cable length 35 m x approx. 10 mm, with roller rope window and removable guide rollers Axles + suspension Codjlf Dtmopfx Abcegn Drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) with central lift arm Axle lift below the recomm. Driving height, therefore no warranty for tire damage Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 235/75 17.5 tires of the manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white LED position lights at the front 2 white/red rear lane departure lights 2 additional LED work lights at the rear, switched via reversing

Condition: good (used), Hang 162-55 riveter for the production of kitchen knives Manufacturer: Hang Germany The machine is used to crimp rivets in knife holders. For medium and large series Solid welded construction Cjdpfx Abeu Ul Tnocsgn Two motorized rivet feeders, rotating sorting bins Pin rivet tool and transport slider for hollow rivets Pressure compensation Flat reinforced arm with height adjustment Weight 570kg 380V power supply The cycle is triggered by the foot pedal.

Condition: excellent (used), Year of construction: 2007, operating hours: 10 h, machine/vehicle number: 103414, High-performance automatic production line for ring binders. Sheet feeder (vacuum feeder), creasing station, gripping hole punching unit (finger hole eyeletting machine), double riveting station, operator control panel (Fanuc QuickPanel View), mechanical feeding unit, single riveting station, folding station. Cover height: 120 – 400 mm; cover width: 300 – 820 mm; material thickness: min. 1 mm – max. 3.5 mm; rivet spacing: 90 – 300 mm. Cjdpjx Apb Hsfx Abcsgn

Condition: new, Year of construction: 2026, Maximum equipment for the professional. Multiple combination with TERSA cutterhead, miter cutting device and swiveling milling spindle. Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved with the scoring saw blade installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside High-precision sliding carriage made of anodized aluminum on hardened and drilled steel guide rails Large boom (1200 x 650 mm) with roller and extendable aluminum telescopic fence up to max. 3300 mm Sawing unit swivels from 90° to -45 Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds Right-left rotation of the milling spindle Quick change to thickness planer thanks to parallel opening jointer tables 2-stage feed in the thicknessing table Sharp toothed steel infeed roller for uniform wood infeed Three independent industrial motors With separate saw-parallel fence and separate feeder fence With lockable main switch Equipment details: Format fence Immediate control Boom Boom with angle-adjustable telescopic lay-off stop with graduation Sliding carriage with ball contact system made of anodized aluminum guides in hardened and ground steel F550S, 15% harder than conventional steel Cjdpfx Abscnxa Sscogn guides riveted and not glued light running, low noise and reliable 10 years HOLZKRAFT warranty on wear of hardened guideways cast iron double cradle saw unit height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts close to the saw blade, mounted on both sides height and inclination adjustable up to 45 standard scoring unit with separate scoring motor 0,55 kW double cradle scoring unit large-dimensioned swiveling double cradle milling unit made of cast iron milling stop heavy professional design the high quality cast iron fence is supplied with fine adjustment as standard 3-fold positionable for fast readjustment of the setting with fine adjustment via toothed rack, numerical display and aluminum fraise stop jaws Planer steel infeed rollers with helical teeth for a constant and uniform wood infeed solid backstops prevent the backstroke of workpieces 4-knife torsion shaft ensures an optimal planing pattern table lips for a quieter running Tersa planing cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, which ensure high stability under all working conditions. Due to the special lifting device, the table position is perfectly maintained even without locking. Rip fence with fine adjustment and quick clamping stable round bar guide made of ground steel reversible aluminum ruler no measuring gap, guide rods are overlapping Separate dressing fence large professional design (1800 x 150 mm) 0-45° swiveling with quick adjustment stable round bar guide made of ground steel simultaneous opening Art: No. 5500557

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 360 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,000 g, number of axes: 3, This 3-axis CHIRON FZ 12 KW vertical machining center was manufactured in 2012. It features a high-speed spindle with a maximum speed of 12,000 rpm and a rapid traverse speed of up to 60 m/min on the Z-axis. The machine includes a 24-slot automatic tool changer and can handle a table load of up to 500 kg. Ideal for precision machining tasks. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Controlled axes: 6 axes • Reach: 704 mm • Acceleration/deceleration: 0 to 12000 min-1 in 0. 6 seconds • Clamping surface: 820 x 440 mm² Cgsdpfx Abjx Nr I Ejcjn • Drilling capacity in st 60: Ø 16 mm • Tapping: m 16 • Milling capacity in st 60: 80 cm³/min • Acceleration: x & y axis 0. 7 g, z axis 1. 0 g Extra Information Movement Axis Movement Range and Speed: J1: 340°/360° (option) at 350°/s J2: 200° at 350°/s J3: 388° at 400°/s J4: 380° at 450°/s J5: 240° at 450°/s J6: 720° at 720°/s Allowable Load Moment: J4 & J5: 11.9 Nm J6: 6.7 Nm Repeatability: +/- 0.02 mm Maximum Speed J1: 195°/s J2: 175°/s J3: 180°/s J4 & J5: 400°/s J6: 600°/s Allowable Load Moment J4 & J5: 7.7 Nm J6: 9.8 Nm Tools Automatic Tool Changer: Tool Pockets: 24 Tool Change Time: approx. 0.9 s Chip-to-Chip Time: approx. 2.4 s The workpieces are supplied via an automated feeding system and sequentially loaded into the Chiron machining centres by two Fanuc industrial robots. Once the machining processes are complete, they are removed again. The robots then transfer the components to a transfer system, which transports them to the downstream cleaning system. The integrated washing line ensures reliable cleaning of the components in accordance with the defined cleanliness specifications. After the washing process, two synchronously operating Fanuc robots take over the cleaned parts in the rear section of the system. Depending on the process specifications, these are either palletised automatically or further processed in a downstream step, for example by riveting. The entire system operates fully automatically.

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2026, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and short-term available units, on our website. Excerpt from the equipment. Full equipment details available upon request. Frame: * Standard ladder-type steel lightweight frame with through crossmembers * Pre-cambered chassis frame * Cover plate between side frame and main beams as tire protection for the drive axle wheels of the tractor unit * Approx. 8 mm thick coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337 Chassis: * Axle lift mechanism on axle 1 * BPW three-axle ECO Air unit with disc brakes, approx. Ø 370 mm, ET 120 * Air suspension, approx. 260 mm stroke Vehicle Tyres: * 6x 445/45 R 19.5, 160J tires Chassis attachments: * Mechanical landing gear with compensating foot, approx. 24 t lifting capacity, single-sided operation on the right in direction of travel * Tool-free folding side underrun protection, right and left in direction of travel * Spare wheel carrier with winch including 1 wheel fixing kit, installed behind the axle unit * Mounting for 16 square tube stake pockets approx. 80 x 80 x 1,990 mm, installation on both left and right sides of the longitudinal beam in direction of travel * Waterproof plastic toolbox, internal dimensions approx. 545 x 400 x 400 mm, installed at rear left in the direction of travel * Rear right retractable boarding ladder Brake / Air Suspension System: * EBS 2S/2M system with stability program (includes ABS/ALB function), EBS socket ISO 7638 (without connecting lines) * Parking brake as spring-actuated brake, external pneumatic connections, as well as external EBS diagnostic connector via ISO 7638 socket * WABCO EBS system * Air suspension system including one lift and lower valve, installed on the left behind the axle unit in direction of travel. Driving position adjusts automatically * Two foolproof coupling heads in front ISO 1728 * Brake and air reservoir tanks made of steel (EN 286-2) Floor: * Plywood floor panels, approx. 30 mm thick, multi-glued * Rear floor sealed * Pockets for square tube stakes approx. 80 x 80 mm, arrangement according to drawing J9: 8 pocket rail strips (18 stake pockets per strip: 4 outside + 10 in the center per strip) Front wall: * Approx. 2,000 mm high front wall with high-volume corner stanchions made of steel, profiled steel sheet, bolted/riveted to the frame, 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the bulkhead according to EN 12640. Note: When using the front wall for load securing, suitable lashing straps must be used for tensioning, especially if the vehicle is operated without side boards and tailgate/door! * Side wall VarioFix steel perforated outer frame without stake carriers * 24 pairs of lashing rings in the outer frame (to EN 12640), permissible tensile force approx. 5,000 kg per ring Electrics / Electronics: * Steel light support, positioned above the underrun protection * KÖGEL LUXIMA Premium package consisting of: LED license plate lighting, LED marker lights and reflectors front, flashing LED side marker lamps, Superseal and bayonet light connectors * 2 outline lights with arm, fitted to the multi-chamber tail lights * 2 multi-chamber tail lights * Fixed adapter box with 2x 7-pin sockets (1x ISO 1185 / 1x ISO 3731, 24 V-N / 24 V-S) and 15-pin socket ISO 12098 Cjdox Tx Efopfx Abcsgn * Compact LED revolving beacon, orange, with mounting tube, arranged on the light support. Switch in the lamp casing

Condition: used, tank capacity: 2,50,000 l, GENERAL Design: vertical External diameter: 4,550 mm Total height: 22,950 mm Insulation: available Base type: standing ring Location: outdoor storage Technical documentation: various documents Nameplate: Volume: 250,000 litres Cylinder wall thickness: 5 mm Product-contact material: V2A 1.4541 (AISI321) Condition: used Last application: brewery INSULATION Insulation jacket: riveted Cgsdpoxqdgtefx Abcsn Insulation material: PU foam Jacket material: aluminium Insulation thickness: 150 mm EQUIPMENT Outlet: available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 15 mm

Condition: used, tank capacity: 5,100 l, GENERAL Design: upright Remarks: Agitator drive missing; minor dents on the insulation jacket (see photos) Outer diameter: 1,550 mm Inner diameter: 1,400 mm Total height: 4,500 mm Insulation: present Agitator: propeller Support type: feet Location: outdoor storage Volume: 5,100 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,340 mm TANK Number of feet: 3 pieces INSULATION Insulation jacket: riveted Insulation material: mineral wool Insulation thickness: 50 mm EQUIPMENT Manhole / Dome: on top head (DN 500) Outlet: DN50 DIN 11851 Codpfx Aexqdbdsbcegn AGITATOR 1 Agitator arrangement: eccentric in top head

Condition: used, tank capacity: 2,330 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Double jacket made of V2A around the lower cylinder area and the bottom; 3 support brackets made of stainless steel; parts of the insulation collar were cut off during disassembly; one vessel has no insulation (see photos) External diameter: 1,650 mm Internal diameter: 1,400 mm Total height: 2,150 mm Heating/Cooling: available Insulation: available Max. permitted operating temperature: 200 °C Max. permitted operating overpressure: 2.0 bar Max. overpressure: 3.2 bar Support type: Lugs Location: Bremen Technical documentation: Drawing Cylinder tempering: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 2,330 liters Double jacket volume: 165.0 liters Cylinder wall thickness: 6 mm Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,130 mm Last application: Pharmaceutical chemicals VESSEL Max. permitted operating temperature: 200 °C HEATING/COOLING JACKET Max. permitted operating vacuum: 1.0 bar Bottom tempering: Double jacket INSULATION Insulation jacket: riveted Insulation jacket material: Aluminium EQUIPMENT Manhole/Dome: in top head (DN 400) Cgedpfx Aoxqb T Djbcon Outlet: Flange DN50 Note: Dents on the insulation jacket TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.8 mm Top head wall thickness: 7 mm

Condition: used, tank capacity: 1,18,000 l, GENERAL Design: vertical Outer diameter: 4,700 mm Inner diameter: 4,410 mm Total height: 10,860 mm Insulation: present Max. overpressure: 0.99 bar Agitator: beam agitator Support type: skirt support Location: Kundl (Austria) Technical documentation: drawing Nameplate: Vacuum: 0.25 bar Capacity: 118,000 litres Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 6,500 mm TANK Ends: torispherical heads INSULATION Insulation jacket: riveted Cgedpfx Ajxqb Twebcsn EQUIPMENT Manhole / dome: in shell, in top head Outlet: flange DN100 AGITATOR 1 Bottom bearing: Agitator arrangement: centrally mounted in top head

Condition: used, tank capacity: 5,500 l, GENERAL Equipment: Butterfly valve Design: upright Remarks: Agitator drive missing; Insulation jacket loose in several places (see photos) Internal diameter: 1,450 mm Total height: 4,400 mm Insulation: present Support type: feet Location: outdoor storage Volume: 5,500 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,350 mm TANK Number of feet: 3 pcs INSULATION Insulation jacket: riveted Insulation material: mineral wool Insulation jacket material: aluminium FEATURES Manhole / dome: in top head (DN 500) Outlet: pipe end, approx. Ø 40 mm MATERIAL SPECIFICATION Feet material: stainless steel Cgsdexqdatepfx Abcsn AGITATOR 1 Agitator arrangement: eccentric in top head

Condition: used, tank capacity: 1,600 l, GENERAL Construction type: horizontal Remarks: 4 stainless steel feet, bolted to 4 stainless steel base plates; manhole DN 400; slight metallic discoloration inside; further technical documentation available External diameter: 1,060 mm Internal diameter: 900 mm Total height: 2,100 mm Total length: 2,700 mm Insulation: available Max. overpressure: 2.0 bar Mounting type: feet Location: Bremen Technical documentation: drawing Nameplate: Vacuum: 1.0 bar Volume: 1,600 liters Cylinder wall thickness: 4 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Last application: pharmaceutical chemicals VESSEL Max. permissible operating temperature: 95°C Number of feet: 4 pcs INSULATION Insulation jacket: riveted Insulation jacket material: aluminum EQUIPMENT Manhole / dome: on the vessel Outlet: flange DN65 Note: dents on the insulation jacket, manhole cover missing MATERIAL QUALITY Codpfoxqc Ezjx Abcjgn Feet material: stainless steel TECHNICAL DATA / MEASUREMENTS Bottom wall thickness: 4 mm

Condition: excellent (used), MDS Type: MDS A220-PD MDS A220-PD Autoriv manual workstation A220-PD assembly system is a stationary manual workstation for processing press-fit elements. Intended use: The machine is used to press in fasteners. The worker inserts the corresponding screws, plastic nuts and the component to be and the component to be processed into the machine by hand. The operator then starts the pressing process using a foot switch. The pressing process runs automatically. Fasteners: Press-in nut, rivet nut, self-piercing nut, press-in stud, punching stud / rivet stud Thread size - M5, M6, M8, M10, M12 Technical data: Control voltage 230V/10A Connector plug HAN 10, not wired Temperature ranges: Transport: - 20°C to + 60°C Operation: + 10°C to + 40°C Storage: - 20°C to + 50°C Compressed air connection: Operating pressure: 6 bar Quality: Conditioned, water-free and and unlubricated air Codpfxjtgik Rs Abcsgn Connection: 1⁄2" connection thread Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (W): approx. 600 mm Values apply to a working height (AH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Variant: Manufacturer FESTO Control system: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type C-frame A220-PD Continuous sound pressure level (LpA) 78 dB Operating modes: The operating modes can be changed in the control panel. Automatic mode: The fasteners are pressed in automatically. Movements are only triggered when the operator presses the foot pedal and triggers the pressing process. Manual mode: In manual mode, adjustments are made to the machine. In this operating mode, movements can be activated individually. Weight: Approx. 600 kg Condition: Used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.