Used Rounders for sale (155)

Condition: new, ZHS 600 - 18.5/22 kW Rotor diameter: 400 mm Working cross-section: 520 x 470 mm ZHS 850 - 30 kW Rotor diameter: 400 mm Working cross-section: 800 x 820 mm ZHS 1100 - 37 kW Laodpfxoghgdko Aanjk Rotor diameter: 400 mm Working cross-section: 1,080 x 1,040 mm ZHS 1400 - 55 kW Rotor diameter: 400 mm Working cross-section: 1,400 x 1,380 mm ZHS 1500 - 90/110 kW Rotor diameter: 600 mm Working cross-section: 1,360 x 1,430 mm ZHS 1700 - 75 kW Rotor diameter: 400 mm Working cross-section: 1,640 x 1,550 mm ZHS 2000 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross-section: 1,920 x 1,550 mm ZHS 2600 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross-section: 2,480 x 1,550 mm   ZHS - economical all-rounders The ZHS series has a load-dependent hydraulic slide that feeds the material to the rotor in a slightly inclined position in a horizontal movement. The material is cut between the rotor and stator blades until it falls through the sieve installed and screwed under the rotor. The replaceable sieve defines the final grain size. The shredded material can be discharged via a conveyor belt, a discharge screw or pneumatically using a suction system. The single-shaft shredders of the ZHS series are designed for light to medium-heavy loads in the plastics industry.   Technical details: Roller-bearing hydraulic slide with horizontal movement Screwed knives and knife holders Optionally with segment base for particularly thin parts and materials Aggressiveness of the rotor can be reduced or increased by screwing on filler pieces Can be combined in a 2-stage system with a cutting mill as a pre-shredder

Year of construction: 2023, condition: new, OMAX waterjet cutting system MAXIEM 2040 3D with angle cutting head A-Jet The cross-industry all-rounder for 2D and 3D applications! Waterjet cutting system from the modular OMAX MAXIEM series in bridge design, which perfectly combines decades of experience in abrasive waterjet cutting with a modular design. In terms of reliability, durability and maximum load capacity, the MAXIEM series leaves nothing to be desired. Low-noise and low-emission operation in conjunction with extremely simple PC-supported operation for precision at the push of a button predestine this series for use under the harshest operating conditions in industry and trade, from single-shift operation to 24/7. Laedpfxjm Dtf Us Aanek - closed measuring system - digital drives - brushless servo motors - precision linear guides surface-hardened - portal (bridge) driven on both sides - maintenance-free IntelliTRAX drive - energy-efficient M3050 high-pressure pump - practical water level control - practical control panel trolley on castors - IntelliMAX control software for MAXIEM - high-precision 5-axis kinematics A-Jet - ... The precise solution for all abrasive waterjet cutting applications for any industry. Price on demand

Condition: good (used), 080 USED WP Rotomat Divider-Rounder. TECHNICAL DATA: - Dividing and rounding range 30-80 g. - Number of dividing pieces: 30 EXTERNAL DIMENSIONS (in cm.): - H: 142, - W: 63, - L: 63. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. Laodpfx Aaowga Dienjk The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: like new (used), Year of construction: 2024, operating hours: 240 h, functionality: fully functional, - Purchased Jan 2024, lightly used ~6 months - Condition: Excellent; stored since - Suitable for dough with 65–90% hydration Lajdpfxsxlpdgj Aanek - Variable speed & adjustable band angle - Handles portions up to 2,200 g

Condition: new, functionality: fully functional, power: 55.16 kW (75.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 4,920 kg, lifting height: 3,358 mm, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 2,000 mm, Year of construction: 2025, load capacity: 2,500 kg, Equipment: UVV, additional headlights, all wheel drive, cabin, head guard, hydraulics, pallet forks, parking heater, soot filter, standard shovel, trailer coupling, H&R Loader 5025 – Our heavyweight lifts loads up to 2.5 tons. The H&R Wheel Loader 5025 is your reliable all-rounder for demanding tasks in agriculture, construction, and industry. Advantages of the H&R 5025 Farm Loader Powerful engine: The Yunnei DEF20CAF4 engine with 75 hp ensures maximum performance with lower fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size and weight, the H&R Wheel Loader 5025 is relatively maneuverable. Hydraulic quick coupler: The hydraulic quick coupler allows you to quickly and easily switch between different attachments. Expandable functions: Use the additional 3rd and 4th hydraulic control circuits to operate front-end tools such as mowers, bale grippers, snow plows, and much more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel auxiliary heater, rearview camera, ventilation, and radio. This allows you to complete even longer jobs comfortably and safely. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives a comprehensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 5025 Wheel Loader • Fully equipped • Extensively optimized in Germany • Lifts heavy loads up to 2.5 tons at 3.35 meters • Includes standard bucket (200 cm) and pallet fork • Powerful and versatile – versatile • Well-thought-out design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation, plus radio (MP3 and USB) • Joystick with electric gearshift for precise control • 3rd and 4th hydraulic control circuits for attachments • LED work lights and windshield wipers for clear visibility in all weather conditions • Rearview camera with display • Diesel auxiliary heater • Ball-head trailer hitch with socket for additional trailer use • 220V coolant preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and maintenance intervals • CE compliant according to the EU Machinery Directive • Includes 1 year warranty Spare parts warranty Price Net: €28,583.00 VAT: €5,430.77 Gross: €34,013.77 Financing available! Optional Road registration / operating permit: €480 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Lajdpfeu Dyl Tsx Aanek Engine power: 75 hp (55.8 kW) Emissions class: Euro 5 Lifting height: 3358 mm (bottom edge of standard pallet fork) Unloading height: 2692 mm (standard bucket tipped out) Lifting capacity: 2500 kg Wheelbase: 2550 mm Tires: 16-70 R20 Dimensions: 5370 x 2080 x 2650 mm Weight: 4920 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, table length 1200 mm table width 800 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,19 t dimensions 1,2 x 0,8 x 0,85 m Siegmund workstation including 2 drawers Lsdpfx Aega Nh Hsaneak Premium Light, through hardened tool steel X8.7, plasma nitrided and BAR coated. Drilling Ø 28 mm, drilling surface 100x100 mm grid. Material thickness approx. 15 mm With the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop! Consisting of: 1x 004002 (Siegmund Workstation) 1x 804004.X7 (perforated plate) 1x 284030 (clamp holder) 1x 004020 (shelf) 1x 284035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) Spacer ring 800653.N is required for clamping with bolts 280510/280511.

Condition: refurbished (used), Technical data: Weight range: 200-2000 gr Lodpotzbxhsfx Aanoak Productivity of the machine: up to 2500 pcs/hour at 1000 gr Rounding length: 560 mm Dimensions (L x W x H): 5520x1100x1500 mm Weight, net: 880 kg Connection value: 1.5 KW

Condition: new, Year of construction: 2024, Max. edge thickness 3 mm (optionally up to 8 mm) Min/Max. work piece thickness 8–60 mm* Min. workpiece length approx. 200 mm* Min. workpiece width approx. 80 mm* Feed speed approx. 10 m/min. Laedpeg Tu Rkjfx Aanjk Ready to operate approx. 6 min. Power consumption max. approx. 14 kW Electrical connection 400 V – 3 Ph – 50 Hz Machine dimensions 5,250 x 1,230 x 1,430 mm (LxWxH) Weight approx. 1,700 kg pre-milling head Whispercut radius for corner rounder R = 2mm heatable infeed fence quick change device f.motor corner rounder change motor for corner rounding unit including HM profile cutter radius for change motor R = 1mm Radius Multi-Radiusscraper R2/R1 wheels release agent spraying unit cleaning agent spraying unit protection spraying edge nesting pneumatic 3-point adjustment

Condition: good (used), 915 USED bun divider and rounder. TECHNICAL DATA: - division weight 33-80-160 g, Lodpfx Ajvrdz Djansak - round bun weight: 50-65 g and 100-130 g, - 6 or 3 rows, - capacity 14 000 pcs/h. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: good (used), functionality: fully functional, Super Soco TC Electric Motorbike With increased battery charge time, increased speed and increased range, the TC is a fantastic all-rounder electric motorbike with the looks and practicalities to deliver. Capable of 28mph with a 45 mile range, the Super Soco TC is well suited to become your daily inter city commute. The battery easily removes to be charged at work or at home over a 6 hour period. With no gearing thanks to the electric motor, this automatic "twist and go" bike is extremely easy to ride. Lasdpfx Aasv U El Nsnek A large display gives excellent visibility of speed, range, battery levels and driving mode at a glance without compromising on retro looks. The 3000W Bosch motor gives smooth acceleration up to 28mph in luxurious silence. Keyless, the TC has been designed to protect against theft. Starting the bike is the push of a button. A lightweight frame makes handling not only easy, but extremely good fun. Powerful front LED lights offer illumination for both you and other road uses. Hydraulic double piston brakes give safety and control in all conditions. Good working condition. Please check out our other listings as well

Condition: new, ELMAG electric hand pallet truck EHW 1500 Our electric hand pallet truck EHW 1500 is a true all-rounder with a load capacity of 1500 kg. Its low weight and the fast charging time of our Li-ion batteries enable you to use it quickly and effortlessly. The EHW 1500 is perfect for use in your logistics and warehousing operations. It handles the transport of pallets, materials and goods with ease and helps to optimize your material flow. Discover the future of lightness in your company with the EHW 1500 and increase your efficiency to new heights! ADVANTAGES Precise digital LCD display for the battery charge level Outstanding maneuverability thanks to lateral support rollers for optimum cornering Outstanding lightness and maneuverability Handles inclines of up to 4% with a load or up to 16% without a load Enjoy up to 8 hours of battery life Charger included for convenient recharging The 24V/20Ah Li-ion battery weighs just 4.4 kg Laedpfx Ast Hvzueanjk Effortless battery change with just one movement TECHNICAL DATA Load capacity 1500 kg Fork width 540 mm Fork length 1150 mm Minimum height 80 mm Max. Lifting height 195 mm Speed with or without load 4.6 or 4.8 km/h Dimensions LxWxH 1530x540x1160 mm Weight 123 kg

Condition: new, Year of construction: 2024, functionality: fully functional, New machine Stainless steel model Laedpsivduxsfx Aanok 24 months warranty Features: + TOP price-performance ratio + Solid conical rounder in stainless steel design + with control panel and automatic flour duster + Suitable for medium-sized dough pieces (approx. 300 - 1,100 g) + ideal for wheat dough up to a TA of approx. 170 (depending on dough) + extra long rounding/moulding path of 6 meters for best rounding properties + chutes and cones are Teflon-coated + Base frame is mobile and also made of stainless steel + Mounted on robust castors with brakes SPECIAL equipment (cannot be retrofitted!): - Blower / aeration of the channels and cone (recommended for doughs with TA > 155): + 1.980,-- EUR Technical data: Weight range: 300 - 1100 grams (depending on dough/product) Hourly output: approx. 1,800 pieces (depending on dough/product) Knitting/rounding path: 6 meters Dimensions: 105 x 105 x 160 cm (WxDxH) Dough infeed: at a height of 86 cm Dough output: at a height of 100 cm Motor power: 0.75 kW Connected loads: 400V, 3Ph, 50Hz Fuse protection: 16A-CEE plug Net weight: approx. 450 kg

Condition: good (used), Daub Model: DV10 bun divider / rounder Daub semi automatic bun divider rounder For dividing and rounding rolls, 36 divisions at a time, 3 phase, 3 moulding plates" Ledpfxed Dcwvj Aaneak

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1000004052, Equipment: type plate available, For sale edgebanding machine Biesse Stream B1 8.5 with return table Edgebanding machine in continuous use - edgebanding in PUR and AIR FORCE technology feed rate 1-25 mb/min wrapping methods - AIR FORCE - PUR - EVA maximum height of the elements being glued - 40 mm maximum width of the elements on the return table - 1300 mm line composition - 2 milling heads height 44mm Lasdpfx Aju Suh Ssansk - EVA / PUR overlay unit - AIR FORCE - drills - pre-profile cutters - rounders - groove saw - profile cyclers - flat cyclines - polishers magazine for 12 rolls of edge banding in case of questions please contact us.

Condition: reconditioned (used), functionality: fully functional, Roll Divider and Rounder Machine Fortuna Automat Grüße 4 E 30-part roll press With moulding deactivation Dough input: 1200–3300 grams Dough piece weight: 40–110 grams Knife head electrically tiltable to the rear for cleaning Dividing head/knives newly reworked Lodpsxcqgdjfx Aanoak Knives made of stainless steel Machine was completely overhauled and repainted 2 years ago Moulding plate and operating manual included

Condition: used, Year of construction: 2009, Numerical control POWER CONTROL PC 22 Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3000 Maximum panel height mm 60 PVC-ABS edge thickness mm 3 Feed speed mt/min 40 Feed speed with rounders mt/min 20 Motorized pressure rubber belt Bearing track with retractable pin (distance between pins mm 500) Squaring part composed of: Anti-adhesive group Timed automatic anti-splinter group Double shredder group Free space for any group addition Lodpfspp Tkfsx Aanoak Gluing unit with pre-melter and glue pot Automatic adjustment of the edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapped trimming unit FK rounding unit Edge scraper unit Glue scraper group Brush group Anti-adhesive group

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on the dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (340 - 2800 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto a table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Lajdpfx Aasvxg Rnsnjk Unit weight: 170 - 1400 grams (depending on dough) Piston: 1 dough part piston (diameter 140 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Condition: used, Year of construction: 2019, Smart Touch Numerical Control with Sintra HD Software Panel height 10 - 60 mm 22 mm solid wood Pvc / Abs mm 3 Feed speed up to 25 meters / min Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Motorized and electronically adjustable panel support guide by C.N. Side roller conveyor with idle wheels for panel support ADZ-700 anti-adhesive group Rectifier unit with 2 electronically adjustable motors by C.N FI-502 Lamps to heat the edge of the AdIRL-700 panel Reel holder plate at 1 position Gluing unit for EVA hot melt glue with QM-705 glue pot Additional glue tank Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. Anti-adhesive group End trimming unit with 2 IN-801 motors Offset trimming / gleaning unit with 2 motors electronically adjustable by C.N RF400 PRO-NESTING KIT for gleaning unit Non-stick group Rounding unit with 2 multifunction motors (gleaner + rounder) AR30 NC LPT-700 non-stick liquid application system Laodpfx Aajr Ip Sdjnsk Electronic edge scraper unit electronically adjustable by C.N RB400 PRO-NESTING KIT for edge scraper group RCC-701 glue scraper unit Brush group "SP-501" "PH-700" hairdryer group

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on the dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (40 - 440 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort Lajdpfx Ajvxhcfoanjk + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt available + ejection onto table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Unit weight: 20 - 220 grams (depending on dough) Piston: 1 dough part piston (diameter 60 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Condition: used, Power Control Pc 22 Panel height 60 mm Solid wood mm 20 Pvc / Abs mm 3 Feed speed up to mt / min 24 Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Panel support guide Side roller conveyor with idle wheels for panel support Rectifier group with two motors Lamps to heat the edge of the panel 2-position reel holder magazine with automatic edge change from C.N. Gluing unit for EVA hot melt glue with pre-melter and glue pot Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. End trimming unit with 2 motors with automatic inclination adjustment Overlapping trimming unit with 2 motors Rounding unit FK 11 with 2 multifunction motors (gleaner + rounder) with control adjustment numeric automatically Edge scraper group Glue scraper group Brush group Laodpfsvph Hlox Aansk

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on the dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (260 - 2400 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt can be selected + ejection onto a table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Unit weight: 130 - 1200 grams (depending on dough) Piston: 1 dough part piston (diameter 120 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Lodpfxevxg S Es Aaneak Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Input height with 40 kg hopper: 1501 mm Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Condition: used, Power Control Pc 22 Panel height 60 mm Solid wood mm 20 Pvc / Abs mm 3 Feed speed up to mt / min 24 Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Panel support guide Lasdpfxjgiyn Ie Aanek Side roller conveyor with idle wheels for panel support Grinding group Lamps to heat the edge of the panel 6-position reel holder magazine with automatic edge change from C.N. Gluing unit for EVA hot melt glue with pre-melter and glue pot Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. End trimming unit with 2 motors with automatic inclination adjustment Overlapping trimming unit with 2 motors Gluing unit with 2 tilting motors electronically adjustable by C.N. Multifunction 4-motor rounding unit (gleaner + rounder) with numerical control adjustment in automatic Free space for the possible insertion of another work group Edge scraper group Oscillating brush group

Condition: new, Year of construction: 2025, warranty duration: 36 months, New machine 3-year warranty including delivery* & instruction in your bakery * Ground-level installation and sufficient door widths required Advantages: + unbeatable price-performance ratio + modern, volumetric dough dividing machine (gentle on the dough, without vacuum!) + particularly suitable for soft wheat-rye mixed dough + extended weight range possible with double piece output (140 - 1700 g piece weight) + revolutionary dough dividing system requires minimal cleaning effort + no dough residue in the drum at the end of the production cycle + dividing the dough without unnecessary stress and compression of the dough + high precision of the dough weights at the same time + pressure lubrication with oil circulation and filtration, very low oil consumption + easier filling of the dough hopper due to low height + height-adjustable conveyor belt available + ejection onto table or other machines (rounder, etc.) possible STANDARD equipment: + weighing chamber made of stainless steel + robust Construction: steel frame, stainless steel housing + Double piece function (only for model with 1 piston) + Touchscreen control with self-cleaning program >> Setting the hourly output / piece counter / piece weight >> Programming and naming of recipes >> Reading the production statistics + Electronic speed setting + Electronic weight setting + Electronic piece counter + Teflon-coated stainless steel funnel (conical or square depending on size), + 40 kg dough capacity with safety grid in accordance with CE >> Other funnel sizes available for a small additional charge (80 / 120 / 160 / 200 / 300 kg dough) + Separately driven and height-adjustable output belt + Adjustable flour sprinkler, prevents dough pieces from sticking to the output belt + Scraper on the dough output belt Technical data: Capacity: 900 - 2500 pieces per hour (depending on dough) Unit weight: 70 - 850 grams (depending on dough) Piston: 1 dough part piston (diameter 110 mm), 1-row dough output Power: 2.45 kW Connection values: 400V - 3Ph- 50Hz Fuse: 16A-CEE plug Dimensions of machine in working position: 1120-1136 x 626 x 1501 mm (WxDxH) Dimensions of machine in resting position: 1052 x 626 x 1501 cm (WxDxH) Throwing height with 40 kg hopper: 1501 mm Net weight: 410 kg SPECIAL accessories, prices on request: - Stainless steel drag for pre-wrapping - Frequency converter for continuously adjustable speed of the dough output belt - Take-off roller on chamber output Laodpfxjvxg Utj Aanjk - Short rounding bar - Higher ground clearance 10/15/20 cm - Additional power connection for connection to work table / rounding beam etc. >> 400 V high current / 3 Ph >> 230 V light current / 1 Ph or 3 Ph

Condition: used, Year of construction: 2009, Numerical Control Sintra Panel height 60 mm Ledpsh Uhxnsfx Aanjak Solid wood mm 20 Pvc / Abs mm 3 Feed speed up to 25 meters / min Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Motorized and electronically adjustable panel support guide by C.N. Panel introduction table to facilitate the alignment of the input panel Side roller conveyor with idle wheels for panel support Grinding group Coil holder magazine with 2 positions with automatic edge change from C.N. Gluing unit for EVA hot melt glue with pre-melter and glue pot Predisposition for gluing unit for PUR glue Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. End trimming unit with 2 motors with automatic inclination adjustment Refilling unit with 2 superimposed motors Gleaning unit with 2 tilting motors Multifunction 4-motor rounding unit (gleaner + rounder) with numerical control adjustment in automatic Non-stick group Adjustable edge scraper group Glue scraping unit Oscillating brush group

Condition: new, Year of construction: 2024, functionality: fully functional, New machine Stainless steel model 24 months warranty Features: + TOP price-performance ratio + Solid conical rounder in stainless steel design + With control panel and automatic flour duster + Model "S", suitable for small dough pieces (approx. 100 - 350 gr) + ideal for wheat dough up to a TA of approx. 170 (depending on dough) + extra long rounding/moulding path of 6 meters for best rounding properties + chutes and cones are Teflon-coated + Base frame is mobile and also made of stainless steel + Mounted on robust castors with brakes SPECIAL equipment (cannot be retrofitted!): - Blower / aeration of the channels and cone (recommended for doughs with TA > 155): + 1.980,-- EUR Technical data: Weight range: 100 - 350 grams (depending on dough/product) Hourly output: approx. 1,800 pieces (depending on dough/product) Knitting/rounding path: 6 meters Dimensions: 105 x 105 x 160 cm (WxDxH) Dough infeed: at a height of 86 cm Dough output: at a height of 100 cm Motor power: 0.75 kW Connected loads: 400V, 3Ph, 50Hz Fuse protection: 16A-CEE plug Net weight: approx. 450 kg Lsdpjivdu Aefx Aansak