Used Saw Mill Machine for sale (65,546)

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Nwedelhwr Repfx Ag Njc Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: used, Year of construction: 2005, control Heidenhain x-travel 900 mm y-travel 900 mm z-travel 500 mm a-axis -30/+110 ° c-axis 360 ° table diameter 800 mm table load 1.000 kg spindle tunring speed 18.000 U/min spindle drive 40 kW torque 137/100 Nm tool taper HSK-63 A Nwedpfx Agoykvato Nec number of tool places 30 Pos. max. tool diameter 90 mm max. tool length 300 mm max. tool weight 10 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2005, x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 124 turning speed range - spindle 50 - 4.000 U/min transmission ratio 2 drive capacity - spindle motor 6 kW tension force 10 kN swivellable manuell +/-45 ° max. tool diameter 125 mm max. tool weight 6 kg table surface area 400 x 800 mm T-slots 5x14x80 max. table load 400 kg feed speeds X/Y: 0 - 6.000 mm/min feed speeds Z: 0 - 4.000 mm/min rapid traverse X/Y: 6 m/min rapid traverse Z: 4 m/min total power requirement 11 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,9 x 3,5 x 2,0 m Njdpfoylcpqex Ag Newc Includes: Heidenhain TNC124 point-to-point control Electrical documentation available Coolant system 2 work lights Machine vise Various tool holders Various SK40 tools Enclosure with 2 sliding doors available, pictures to follow

Condition: ready for operation (used), total height: 3,870 mm, total width: 3,417 mm, total length: 10,994 mm, controller manufacturer: Heidenhain, empty load weight: 23,500 kg, 4 assen gelijktijdig + B- en C-as hoge druk koeling door spindel (20 bar) 4e as op tafel (zowel horizontaal als verticaal) centraal smeersysteem Gereedschapswisselaar met 40 posities Spaantransportband Longitudinal travel X-axe: 6000 mm Nsdpfx Aoymg Sfjg Nowc Crosstravel Y -axe: 1200 mm Travel Z-axe (Height): 1500 mm Power on spindle: 36 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 40 > 3000 rpm

Condition: ready for operation (used), total height: 3,870 mm, total width: 3,417 mm, total length: 10,994 mm, controller manufacturer: Heidenhain TNC 530, empty load weight: 23,500 kg, FBF-S 6000 4-assige gelijktijdige X/Y/Z + draaitafel hoge druk koeling door spindel (20 bar) Nwjdpfxsymg Slj Ag Nec 4e as op tafel (zowel horizontaal als verticaal) dia 1000 mm CNC universele freeskop, indexering elke 2 x 2,5° Renishaw meetsysteem centraal smeersysteem Gereedschapswisselaar met 40 posities T-sleuftafels Stolle inbegrepen 7000 x 1500 mm Spaantransportband Alle documentatie, CE-certificaat, parameters etc. slechts +- 500 werkuren vanwege een faillissement vanwege een verloren contract van de Franse nationale spoorwegen Longitudinal travel X-axe: 6000 mm Crosstravel Y -axe: 1200 mm Travel Z-axe (Height): 1500 mm Power on spindle: 30 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 40 > 4000 rpm

Condition: ready for operation (used), total height: 3,300 mm, total width: 3,450 mm, total length: 6,000 mm, controller manufacturer: Siemens, empty load weight: 17,000 kg, Model: FTV 850 Koeling door spindel Het werkgebied kan in twee secties worden verdeeld 2 magnetische tafels Bewegende kolom, vergelijkbaar met Mazak VTC / Unisign / Hedelius Zware chassisstructuur Longitudinal travel X-axe: 1800 mm Crosstravel Y -axe: 850 mm Travel Z-axe (Height): 800 mm Dimensions clamping space - table: 2300 x 900 mm Njdpowxz D Usfx Ag Nswc Universal (2x 360°): ISO 50 Boring head (1 x90°): 19 kW

Condition: ready for operation (used), controller manufacturer: Heidenhain, empty load weight: 18,500 kg, total length: 6,450 mm, total width: 3,700 mm, total height: 3,200 mm, CNC indexerende freeskop inclusief spaantransportband Longitudinal travel X-axe: 3000 mm Cross travel Y-axe: 1000 mm Nsdpoymg Sxsfx Ag Nswc Travel Z-axe: 1600 mm Dimensions clamping space- table: 3360 x 1000 mm Power on spindle: 18 kW Type of millinghead: ISO 50 Max speedrange: 15 > 2000 rpm

Condition: ready for operation (used), total height: 3,580 mm, total width: 3,452 mm, total length: 10,345 mm, controller manufacturer: Heidenhain, empty load weight: 23,500 kg, 4 assen gelijktijdig hoge druk koeling door spindel (20 bar) 4e as op tafel (zowel horizontaal als verticaal) Renishaw meetsysteem centraal smeersysteem Gereedschapswisselaar met 24 posities T-sleuftafels Stolle inbegrepen 7000 x 1500 mm Spaantransportband Nwedpjymg Srofx Ag Nec Longitudinal travel X-axe: 6000 mm Crosstravel Y -axe: 1200 mm Travel Z-axe (Height): 1500 mm Dimensions clamping space - table: 7000 x 1500 mm Power on spindle: 30 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 40 > 3000 rpm

Condition: used, Year of construction: 1986, Universal Milling Machine Manufacturer: IMATEC, Type: FU-145 Year of manufacture: approx. 1986 Nwedpfx Ajwhm R Ssg Noc Technical Specifications Manufacturer: IMATEC Type: FU-145 Year of manufacture: approx. 1986 Conventional Control System Travels X/Y/Z: 1000 / 300 / 500 mm Vertical Spindle Speeds: 38 - 1440 rpm Horizontal Spindle Speeds: 35 - 1500 rpm Spindle Mount: ISO 50 Milling Motor: 5.5 kW Connected Power: 7.0 kW Installation Dimensions: approx. L 2.0 x W 2.10 x H 2.2 m Weight: approx. 3.1 t Features • 3-axis digital display ELESTA • Table size: 1620 x 320 mm All information is subject to change without notice. A live demonstration is possible at any time in our exhibition hall.

Year of construction: 2025, condition: new, Multifunctional CNC drilling and milling center for all types of profiles. Suitable for processing aluminum and PVC profiles for doors and windows. The multifunctional CNC (Computer Numerical Control) drilling and milling center is a high-tech machine designed to perform a wide range of metalworking operations. This type of equipment combines functions such as drilling, milling, reaming, tapping, and sometimes even turning, providing high precision and efficiency in machining various materials including metals, alloys, wood, and PVC. Nodpfx Aew T Sldsg Newc Key Features and Advantages - High precision and repeatability: Thanks to digital control, CNC centers can perform complex, multi-stage operations with micron-level accuracy. - Versatility: Multifunctional centers allow rapid reconfiguration for different operations and can machine parts of different sizes and shapes. - Automation: These machines are automated, which significantly reduces the need for manual intervention and the risk of errors. - Reduced production costs: By consolidating multiple operations into a single machine, equipment, time, and labor costs are optimized. - Capability to process complex shapes: CNC centers can machine intricate geometrical parts that would be difficult or impossible to achieve with manual machines. Main Components - Control system (CNC): Manages all movements and operations of the machine according to the pre-set program. - Worktable and spindle: The area where the workpiece is mounted, and the spindle that drives the tool. - Tool magazine: Stores and manages the tools for automatic changes during operation. - Cooling and lubrication system: Maintains optimal working temperature and protects both tools and material. Applications Multifunctional CNC centers are used in various industries, including automotive engineering, aviation, electronics, and mechanical engineering, wherever high-precision machining of parts and complex geometrical shapes is required. These machines deliver high productivity, reduced setup time, and significantly improved quality control, making them indispensable for modern manufacturing processes. Brand new!!!

Condition: excellent (used), Year of construction: 2020, Sub-spindle, Y-axis, C-axis FANUC 31i B5-NT-SmartX control Turning diameter max 305mm Turning length -870 mm Main-spindle speeds 6'000 rpm Sub-spindle speeds 6'000 rpm Milling head B-axis +/- 95 ° Tool changer with 72 positions Turret head: 24 positions with 12 driven positions Tool presetting device Nwodpfxjyla Spe Ag Nsc Workpiece pick-up attachement Tool breakage control device Bar loader Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 mm table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Equipment/accessories - 7 vices - change wheels Nwedoylpzyjpfx Ag Noc - Clamping devices - Documentation

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 1,10,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Nwjdpfx Agsyahv So Nec Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: used, functionality: fully functional, DUFOUR 624D MILLING MACHINE Table surface: 1,600 x 345 mm 5 T-slots of 18 mm Spindle taper: 5 A 40 Longitudinal travel: 1,100 mm Cross travel: 400 mm Vertical travel: 546 mm Maximum clearance between horizontal spindle axis and table: 552 mm Nsdsynhh Depfx Ag Newc Clearance between head spindle axis and frame: 410 mm Clear height under heads: 530 mm 16 spindle speeds: from 24 to 1,180 rpm Longitudinal and cross feeds: 10 to 825 mm/min Rapid traverse: 2.8 mm/min Spindle motor: 7.4 kW Feed motor: 2 kW Coolant by electric pump: 0.16 HP Overall dimensions (L x W x H): 2,120 x 2,105 x 2,050 mm Approximate weight: 3,750 kg

Condition: good (used), Year of construction: 2001, Power: 4.5 kW Drilling capacity: 30 mm End milling: 25 mm Nwjdpfx Ajyipnueg Nsc Motor power: 0.85/1.5; 2.2 kW

Condition: excellent (used), CATALOG NUMBER: 6969 TECHNICAL DATA Circular saw: - Max saw blade diameter: 300mm - Spindle: 30mm - Max cutting height: 60mm - Saw blade adjustable front/back - Motor: 2.4kW Milling machine: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 190mm - Lockable spindle - Max cutter diameter: 360mm - Motor: 7.5kW - 2 spindle speed options - Material hold-down - Adjustable side carriage (up/down, front/back) - Angle stop - Pull-out table support - Manual carriage feed - Extraction port diameters: 80mm, 160mm - Dimensions (L/W/H): 1910x1960x1800mm, Weight: 830kg – Polish production – DTR (Technical Documentation) included – Upper control panel Nsdpfx Agex R Du Hs Nowc – Used tenoning machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated according to 4.2 PLN/EUR conversion rate (In the event of substantial exchange rate fluctuations, the price may be subject to change)

Condition: good (used), Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, metal band saw machine Njdpfxohwxb Ts Ag Newc -Manufacturer: Pehaka, horizontal band saw automatic band saw -Drive: 0.8 kW -Cutting data flat: 320 x 150 mm -Cutting data square: 150 mm -Saw blade speed: continuously adjustable, 20 - 195 m/min -Saw band: approx. 3700 mm -Coolant system -Dimensions: 1800/940/H1310 mm -Weight: 528 kg

Condition: new, Year of construction: 2026, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply Nwedpfevuf S Nex Ag Nsc 3-phase 400V Motor power 1.1 kW Weight NETTO/ BRUTTO 220 kg / 284 KG Warranty 12 months Manual yes CE declaration yes Angle 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding.

Condition: excellent (used), Available: Immediately Nsdpfx Aoyh E A Aog Njwc

Condition: used, functionality: fully functional, power: 1.69 kW (2.30 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 500 mm, total width: 440 mm, total height: 230 mm, overall weight: 26 kg, Edge Milling Machine for Metal Brand: Marpol Rasant Suitable for deburring and beveling metals (e.g., steel, aluminum, brass), plastics, etc. Used, fully functional Bevel angle: 45° Continuously adjustable bevel Maximum bevel: 8 mm x 45° Nwedpfx Agex U D Afo Nec Cutter equipped with carbide indexable inserts Guide rail length: 400 mm 2-speed motor, Speeds: Level 1: 1420 rpm Level 2: 2840 rpm Motor power: 1.7/2.3 HP Connection: 400 V, 3-phase Weight: 26 kg Required space (L x W x H): 500 x 440 x 230 mm The machine can be inspected and tested under power. The machine is being sold due to the upcoming closure of the business (retirement). We also have further offers online.

Condition: used, Year of construction: 2004, Technical details: Nodpfxek Hdu Dj Ag Nswc x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm number of spindle speeds: 63 - 3.150 1/min feed stepless: 12-3000 / 6-1500 (Z) mm/min quill stroke: 100 mm milling-head swivable +/-: 90° spindle taper ISO: SK 40 surface area: 630 x 400 mm total power requirement: 8 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2 x 1,9 x 1,95 m universal milling machine with point to point control, mechanical handwheels, swivel - rotary table (mech.) +-45°, hydr. tool clamping, half cabin, coolant device, manuals (German language) *

Condition: used, Lot consists of: (1) universal milling machine Nodpfx Ageylacbo Nswc

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), throat depth: 400 mm, Rond materiaal: Ø 400 mm Nwodpfx Agoxpymao Noc Rechthoekig: 400 x 400 mm Maximaal materiaalgewicht: 1000 kg/m Snijsnelheid: 20 tot 110 m/min Afmetingen zaagblad: 5090 x 41 x 1,3 mm Hydraulische klemming spaantransportband Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm

Condition: used, functionality: fully functional, Milling machine Brand: ALCERA GAMBIN Model: 80M Table size: 1200 x 280 mm Travels: 800 x 300 x 520 mm Weight: 2,150 kg Nodpfx Agoym Stno Nswc

Condition: used, Year of construction: 1999, functionality: unexamined, travel distance X-axis: 1,400 mm, travel distance Y-axis: 630 mm, spindle speed (max.): 2,800 rpm, very robust machine – table load capacity up to 1200 kg table size 1800 x 630 mm speed range 56 – 2800 rpm, tool holder ISO 50 Nwjdpfxew Nvyqj Ag Njc travel X / Y / Z 1400 / 630 / 500 mm feed range X, Y 10 – 2000 (Z 2.5 – 500) mm/min, stepless main motor 15 kW, connected load approx. 20 kW includes: universal milling head IUG 32A, swiveling 360° horizontal milling spindle rapid traverse, cycle automation digital display Heidenhain ND 750 coolant system work area enclosure hydraulic tool clamping CE Declaration of Conformity