Used Scm S 630 for sale (648)

Condition: good (used), Year of construction: 2009, functionality: fully functional, For sale is a robust and reliable Holzkraft / SCM Minimax FS 30 Genius jointer and thicknesser. This machine is ideally suited for carpentry shops, joineries, training workshops, and ambitious woodworking enthusiasts. Thanks to its solid cast iron tables and proven SCM technology, the machine operates precisely and reliably. Hedpfx Aozlqh Henyjt The machine is in good used condition and can be inspected and tested by appointment. Technical data: Manufacturer: Holzkraft / SCM minimax Type: FS 30 Genius Year of manufacture: 2009 Voltage: 400 V / 3 phases Motor power: approx. 3.0 kW Jointer width: 300 mm Thicknesser width: 300 mm Combined jointer and thicknesser Cast iron tables Aluminum fence Dust extraction port available Without trailer Weight: approx. 150 kg Equipment: Jointer Thicknesser Aluminum fence Folding jointer tables Dust hood Operation via main switch with emergency stop Scope of delivery: Holzkraft / SCM Minimax FS 30 Genius Accessories as shown in the photos The machine is subject to differential tax according to § 25a UStG. Transportation is possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information is without guarantee.

Condition: excellent (used), Year of construction: 2010, SCM SP1 Thicknessing planer Working width 520 mm Working height 250 mm Electric height adjustment of the worktable Hsdpozqhfmsfx Anyot Planer cutter block with 4 knives 4 feed speeds: 5/8/12/18 m/min Main motor with a power of 5.5 kW Year of manufacture 2010

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, workpiece height (max.): 300 mm, type of input current: three-phase, workpiece width (max.): 220 mm, This machine is in very good condition, was not used as much as anticipated. Hodpfx Aszifmlenyjt

Condition: excellent (used), Year of construction: 2014, TECHNICAL DATA: Working width 230 mm, working height 120 mm, five heads, spiral-knife cutterheads, head arrangement: bottom/right/left/top/bottom, infeed table length 2500 mm, electric height adjustment, stepless feed speed control, pneumatic material pressure, motor with integrated brake, cutterhead speed 6000 rpm, total weight 2000 kg, motor power ratings: 5.5 kW/7.5 kW/7.5 kW/4 kW, year of manufacture unknown. Hsdpfsy D Sfyox Anyet

Condition: good (used), functionality: fully functional, power: 5.5 kW (7.48 HP), number of blades: 4, Surface planer SCM SF520, table length 2700mm, with 4 cutterblocks. Hodszxbcbopfx Anyjt

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, working width: 230 mm, planing height: 130 mm, total width: 1,800 mm, total height: 1,650 mm, total length: 3,500 mm, overall weight: 2,400 kg, table length: 2,000 mm, number of spindles: 4, extraction connection diameter: 120 mm, Capabilities: 230x130 mm Feed device for timber of all widths Hjdey E It Nepfx Anyst Option: pressure device in front of right spindle moulder for short timber Lower horizontal motor: 11 kW Right and left spindle moulder motors: 2 x 7.5 kW Upper planer motor: 11 kW Option: specific feed for workpieces up to 20 mm with electrically adjustable guide, controlled by foot pedal. Year: 2019

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Hedpfszc Ilxox Anyot

Condition: good (used), Year of construction: 1993, functionality: fully functional, Thickness planer Manufacturer: SCM Model: S 50 Motor: 5.5 kW 4 cutter blocks Feed rate: 7.5 - 25 m/min Planing width: 500 mm Planing height: 240 mm Hsdpozncr Aofx Anyjt 2 rollers in the table

Condition: used, Year of construction: 2006, functionality: fully functional, Used Throughfeed CNC Drilling and Panel Processing Center Year of manufacture: 2006 Hedpfx Aoy Iww Nonyst The SCM Morbidelli UNIX NS is an industrial-grade, throughfeed CNC machining center designed for efficient and continuous panel processing. This machine is a reliable solution for high-volume component drilling and automated machining applications. Machine identification Model: Morbidelli UNIX NS Type: Throughfeed CNC drilling and panel processing center Manufacturer: SCM Group S.p.A., Italy Serial number: AL/007960 Year of manufacture: 2006 Condition: Used, industrial-grade CNC machining center Main equipment Upper drilling head: 30 vertical spindles (6+2 configuration) Lower drilling head: 30 vertical spindles (6+2 configuration) Throughfeed design with automatic infeed and outfeed Workpiece clamping and feed system with 4 pressure clamps for stable and secure panel fixation PC-Office numerical control with brushless drive technology Short description The machine’s design enables fast, precise, and continuous production, making it an ideal choice for furniture manufacturing and panel sizing applications. Automatic material handling, dual-sided drilling units, and a robust clamping system ensure high productivity and consistent machining quality.

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: A1/000156, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 16,000 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 300 mm, number of axes: 6, number of slots in tool magazine: 8, controller manufacturer: Routech- Quicklink, actuation type: electric, total height: 3,270 mm, total length: 32,100 mm, total width: 6,250 mm, overall weight: 21,000 kg, table length: 12,000 mm, table width: 1,000 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Routech OIKOS 12/19x1.25 – CNC 6-Axis Machining Center for Timber Construction For sale is a Routech OIKOS 12 CNC-controlled 6-axis machining center, designed for the precise processing of solid and laminated timber components for structural wood construction. This machine is suitable for the production of structural elements for single-family homes, hall construction, conservatories, carports, garden sheds, playground equipment, as well as general engineered timber construction. It enables complete processing of beams in a single pass – without the need for manual repositioning of the workpiece. Hjdpfx Anoyu Upuoyjt Technical Specifications 6 interpolating CNC axes (X-Y-Z-B-C-A) Routech OIKOS 12 Max. workpiece length: 19,000 mm Max. cross-section: 1,250 x 300 mm Min. cross-section: 50 x 20 mm Max. workpiece weight: 1,250 kg (optionally up to 2,500 kg) Voltage: 400 V / 50 Hz Axis travel speeds: X: 107 m/min Y: 75 m/min Z: 28 m/min Rotary axes: A ±140° B ±180° C ±300° Milling Unit 6-axis special milling head TLT 1 (SCM Group) with: 13 kW continuous power (S1) Inverter power 18 kW Spindle speed up to 18,000 rpm HSK 63E tool holder Liquid cooling Processing in one pass: Milling, sawing, slotting, drilling, profiling, cross-cutting – all sides of the workpiece without re-clamping Tool change system Disc magazine “Rapid 8” with 8 tool positions Max. tool diameter: 360 mm Max. tool weight: 8 kg Additionally equipped with: Motorized saw unit Slotting unit with chain Preparation for adapter units Material Handling C-type buffer zone with 6 conveyor belts and 6 clamping chucks, length 13,500 mm Automatic unloading system 13,500 mm with 6 support beams Automatic waste conveyor for offcuts and chips Continuous processing of multiple workpieces possible. Control & Software CNC with PC Office ROUTECH QUICK-LINK user interface BTL data import from common CAD/CAM systems 3D simulation with collision check Restart after program interruption possible Separate simulation station “SIMOIKOS” for office workstation Safety & Equipment Enclosed safety cabin with Lexan viewing panel Photoelectric sensors at infeed and outfeed 2 extraction ports in the work area Air-conditioned control cabinet, CE compliant Summary The Routech OIKOS 12 is a high-performance CNC machining center for modern timber construction. With its 6-axis technology, high traverse speeds, complete 5-sided processing without re-clamping, and integrated material logistics, the machine is ideal for joineries and timber construction companies engaged in industrial production. Suitable for companies seeking precise, repeatable, and economical solutions for timber joinery processing.

Condition: good (used), functionality: fully functional, power: 5.5 kW (7.48 HP), actuation type: electric, Thickness planer SCM, 51cm width, electric height adjustment, 4 cutterhead. Hedpfezxbb Rjx Anyet

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Cutting length: 4300 mm Cutting depth: 4300 mm 7.5 kW main blade unit Hedpfxsznz Uis Anyet Scoring blade unit 1 fixed front table with air cushion 3 mobile front tables with air cushion Pushing carriage with approx. 7 clamps WinCut software Foot pedal for cycle start and stop Safety guards Weight approx. 3277 kg. Available starting September 2026.

Condition: like new (used), Year of construction: 2007, operating hours: 50 h, functionality: fully functional, SCM SUPERSET XL Four-Sided Planer Year of manufacture: 2007 The machine has only operated for 50 hours, it is practically like new. Hsdjyhhx Nopfx Anyot Technical specifications: • Working width up to 240 mm • Working height up to 120 mm • Spindle speed: 6000 rpm • Stepless feed adjustment: 5–25 m/min • Spindle configuration (5 spindles): - bottom 7.5 kW - right 7.5 kW - left 7.5 kW - top 7.5 kW - bottom 7.5 kW • All tool spindles have independent motors The machine is equipped with 2 vertical spindles (2 and 3) with HSK85S quick couplings.

Condition: excellent (used), Year of construction: 1999, machine/vehicle number: AB/118718, functionality: fully functional, SMC SCIE spindle shaper SI12TW Table length: 1,500 mm Spindle adjustment: up/down Blade adjustment: up/down Blade angle adjustment: up to 45° Cutting width on the right side: 1,450 mm Hedpfozc Dxzex Anyjt Maximum blade diameter: 300 mm Milling spindle diameter: 35 mm Spindle speed: 3,000/4,500/6,000/8,000/10,000 rpm Saw speed: 4,000 rpm Motor power: 4 kW Available in the Ardennes region.

Condition: excellent (used), Year of construction: 2012, I sell the widebelt sanding machine SCM Sandya 16 S 110, year 2012. Configuration: Hedpfx Aneihfaweyst 18,5 KW hard rubber cylinder 15 KW hard rubber cylinder 11 KW combi unit soft rubber cylinder + pneumatic jumping pad. Working width 1100mm Pressure rollers for short elements. Air-blow on all units. Total weight 2750kg 3 motors 18,5 + 15 + 11 kW Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: used, Year of construction: 2008, machine/vehicle number: AH005185, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, actuation type: pneumatic, overall weight: 5,500 kg, Equipment: CE marking, We are selling a very well-maintained STEFANI SOLUTION 8000 edge banding machine. Hsdpfx Aezdlabsnyst Year of manufacture: 2008 Machine length: 11,000 mm Edge band thickness: 0.5 - 16 mm Workpiece thickness: 10 - 60 mm Minimum workpiece width: 260 mm Maximum speed: 25 m/min (without using saws) Units: - Separating agent applicator - Pre-milling unit - Gluing unit - Saws - Trimming units - Buffing units - Brushes - Saw for creating grooves on the surface and along the edge. The machine is in operational condition. For additional information, please call.

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Hedpfovvi I Rjx Anyet

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input current: 14 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 118 mm, cutting width (max.): 1,270 mm, saw blade diameter: 350 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, total length: 3,550 mm, total width: 2,200 mm, total height: 1,600 mm, overall weight: 630 kg, Equipment: CE marking, documentation/manual, saw blade guard, – Italian manufacture – Year of production: 2006 – Operating manual and CE certificate Hsdpfx Anoy Ax Nieyjt TECHNICAL SPECIFICATIONS: – Carriage length: 3200 mm – Cutting width on the right side: 1270 mm – Blade diameter: min. 250 mm, max. 350 mm – Scorer blade diameter: 120 mm – Main motor: 5.5 kW – Scorer motor: 0.55 kW – Brake – Main blade spindle diameter: 30 mm – Scorer spindle diameter: 20 mm – Cutting height adjustment – Cutting angle adjustment: 0° - 45° – Max. cutting height at 90° (350 mm blade): ~118 mm – Max. cutting height at 45° (350 mm blade): ~84 mm – Two ratchets – Moving guard – Carriage dimensions (length/width): 3200 x 315 mm – Extraction port diameter: 80 and 120 mm – Overall dimensions (L/W/H): 355 / 220 / 170 cm – Weight: ~630 kg

Condition: used, Year of construction: 2006, functionality: fully functional, Machine identification Model: SCM Sigma Plus 125 P 45 Type: heavy-duty panel saw with lifting platform Manufacturer: SCM Group S.p.A., Italy Serial number: AE/028708 Year of manufacture: 2006 (used machine) Condition: used industrial panel saw Main equipment / configuration Fixed, phenolic-coated front air cushion table with stop Three movable, phenolic-coated air cushion tables Pneumatic automatic alignment device Hjdpfey Iwy Dox Anyot Quick saw blade change system Independent main saw blade lifting THK precision linear guides Four additional clamps in the right-angle alignment zone Optimized saw blade extension PC operator interface in English

Condition: used, Year of construction: 2022, SCM Morbidelli N100 22-31 PROSPACE Year of manufacture: 2022 Condition: Used, recently serviced Machine type: CNC machining center Model: 22-31 PROSPACE Machine weight: approx. 4,000 kg Work table: Complete nesting table Technical data 3-axis CNC machining center 9.5 kW electric spindle HSK tool clamping system 13-position linear tool changer, automatic Drilling unit Complete work table for nesting applications 2 vacuum pumps Automatic tool length measurement TECPAD control panel SCM Maestro software 3 software licenses: Maestro Base Maestro Nesting Maestro Freeform Application areas Nesting Drilling Milling and contour machining Freeform machining Hsdpfx Anszwfivjyst Complete CNC machining of panels and components Included in the scope of supply Complete nesting table 9.5 kW electric spindle Drilling unit 2 vacuum pumps TECPAD control panel 13-position HSK linear tool magazine Automatic tool length measurement system SCM Maestro software with Base, Nesting, and Freeform licenses

Condition: excellent (used), Year of construction: 2003, Year of manufacture: 2003 Voltage: 400 V Frequency: 50 Hz Weight: 3200 kg Hjdpfotr A Evex Anyet Number of axles: 3

Condition: used, Year of construction: 2000, Used machine Year of manufacture 2000 Hsdjzlbr Aepfx Anyjt special SCM guide system of the saw carriage. The arc-shaped arrangement between balls and running guides as well as the hardened contact surfaces ensure exceptional and constant precision the scorer can be swivelled in and out from outside without any problem; a special plate enables precise positioning the fence is extremely robust and can be used for both rip cuts and angle cuts; fast return to the initial position. The precise flip stops enable a direct reading of the dimensions over the entire length Table dimensions 830 x 1200 mm Saw carriage 1500 x 290 mm Cutting length 1500 mm Tilt of the saw blade 45° max. diameter main saw blade 300 mm max. diameter scoring saw blade 100 mm max. cutting height 90° = 95 mm max. cutting height 45° = 67 mm Saw blade speed 4000 rpm Scoring saw speed 8000 rpm Cutting width with parallel guide 1000 mm Diameter extraction port 100 mm Motor 4 kW Weight: 425 kg Availability: at short notice Storage location: Röllbach

Condition: used, functionality: fully functional, Wide belt sander SCM Sandya Win Working width: 630 mm Sanding height: 3 – 140 mm 1 combination unit Hjdpfezmg Swox Anyjt Electric height adjustment Pneumatic oscillation Two feed speeds

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Hjdpfsvwbp Aex Anyst

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 2.21 kW (3.00 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 140 mm, cutting width (max.): 1,270 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 3,700 rpm, total length: 3,200 mm, total width: 5,155 mm, total height: 1,550 mm, overall weight: 691 kg, table height: 900 mm, Equipment: CE marking, documentation/manual, saw blade guard, Year of manufacture: 2022 9 kW motor Scoring unit Panel processing up to 3.2 m length Squaring fence with 2 digital readouts Parallel fence with 1 digital readout Excellent condition Hsdpfxey Shx Sj Anyot