Used Screw Cap for sale (6,446)

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 270 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Ppsdpfsycg I Sjx Afhol Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1495 × 520 × 1340 mm Weight: 250 kg

Condition: good (used), Year of construction: 2013, functionality: fully functional, 610 l/min., 10 bar, 5.5 kW, 400 volts, weight approx. 250 kg, dimensions 1490 x 720 x 1220 mm Good condition Pjdpfxsybbczs Afhepl Price ex location Transport available at extra cost!

Condition: new, Year of construction: 2026, CORMAK LUFT 1000 VSD+PM Screw Compressor – Compact Power for Your Business – ENERGY SAVER Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or a small production line? The CORMAK LUFT 1000 VSD+PM screw compressor is the perfect solution. With a power output of 7.5 kW and an impressive actual air delivery of up to 990 l/min, it provides a constant supply of compressed air, essential for the efficient operation of impact wrenches, blow guns, and spray painting equipment. This 400V-powered model is designed for continuous operation, making it ideal for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw compressor is a step toward significantly improved working comfort—say goodbye to noisy piston compressors and enjoy quieter, more stable performance. The LUFT 1000 VSD+PM features a reliable and robust direct drive system that eliminates vibrations and the need for belt transmission adjustments. This proven solution ensures stable operation and long service life by providing direct power transfer from the motor to the screw module. The maximum pressure generated by this screw compressor is 10 bar. Full control over operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key compressor data and enhancing flexibility and process control. Technical Specifications Motor power: 7.5 kW / 11 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 990 l/min Air delivery at 6 bar: 990 l/min Podeycc Egepfx Afhspl Air delivery at 8 bar: 950 l/min Air delivery at 10 bar: 950 l/min Outlet connection (G): 1/2" Dimensions: 900 × 600 × 840 mm Weight: 120 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Screw Compressor – Compact Power for Your Business – ENERGY SAVER Are you looking for a professional solution to power pneumatic tools in a workshop, paint shop, or a small production line? The CORMAK LUFT 700 VSD+PM screw compressor is the perfect choice. With a power output of 5.5 kW and an impressive actual air delivery of up to 690 l/min, it ensures a constant supply of compressed air, essential for the efficient operation of impact wrenches, blow guns, and spray painting tools. This model, powered by 400V, is designed for continuous operation, making it ideal for demanding applications such as small workshops, tire service centers, and craft businesses. Investing in a CORMAK screw compressor is a step toward significantly improved working comfort—say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 700 VSD+PM features a reliable and robust direct drive system that eliminates vibrations and the need for belt transmission adjustments. This proven solution guarantees stable performance and long service life by ensuring direct power transfer from the motor to the screw module. The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, giving you access to key compressor information and increasing flexibility and control over your processes. Ppsdpfoycctqjx Afhjl Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 l/min Air delivery at 6 bar: 690 l/min Air delivery at 8 bar: 650 l/min Air delivery at 10 bar: 650 l/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 100 kg

Condition: new, Year of construction: 2026, The LUFT 1500 VSD+PM COMPACT screw compressor with a refrigerated compressed air dryer. The LUFT series screw compressors from the Polish brand CORMAK combine state-of-the-art pneumatic solutions with the use of high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Technical parameters Motor power: 11 kW / 15 HP Ppsdpfeyb Dmiox Afhjl Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: average 1650 L/min Air delivery at 6 bar: 1580 L/min Air delivery at 8 bar: 1320 L/min Air delivery at 10 bar: 1230 L/min Outlet connection diameter (G): 1" Dimensions: 1600 × 740 × 1050 mm Weight: 380 kg

Condition: new, Year of construction: 2026, The LUFT 1000 VSD+PM COMPACT screw compressor with a refrigerated compressed air dryer. The LUFT series screw compressors from the Polish brand CORMAK represent the most advanced solutions used in pneumatics, combined with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high efficiency guarantee effective and trouble-free operation. Technical parameters Motor power: 7.5 kW / 11 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: average 990 L/min Air delivery at 6 bar: 990 L/min Ppodpfxjybz Sps Afhjl Air delivery at 8 bar: 950 L/min Air delivery at 10 bar: 950 L/min Outlet connection diameter (G): 1/2" Dimensions: 1470 × 620 × 900 mm Weight: 130 kg

Condition: new, Year of construction: 2026, English translation: The LUFT 700 VSD+PM COMPACT oil-lubricated compressor with dryer features a traditional belt-driven transmission, which results in significantly easier maintenance and lower service costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and when worn, the belt can be easily replaced with a new one. This design also ensures longer service life of components. The absence of a rigid connection between the motor and the compressor’s working elements reduces wear and mechanical stress. The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, which gives access to key device information, increasing flexibility and control over processes. Technical parameters Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: average 690 L/min Air delivery at 6 bar: 690 L/min Ppsdoybvkajpfx Afhel Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection diameter (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 95 kg

Condition: used, power: 99 kW (134.60 HP), gearing type: hydrostat, fuel type: diesel, lifting height: 25,000 mm, Year of construction: 2022, operating hours: 1,635 h, Technical information Make of engine: Deutz Top speed: 40 km/h Empty weight: 18.000 kg Functional Lifting capacity: 6.000 kg Identification Serial number: 00005296 Ppodpfx Afetr Np Eohol Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: - Transport dimensions (LxWxH): 7.63x2.53x3.15 Additional information Please contact PFEIFER GROUP for more information

Condition: used, power: 99 kW (134.60 HP), fuel type: diesel, lifting height: 25,000 mm, Year of construction: 2022, operating hours: 974 h, Technical information Make of engine: - Top speed: 40 km/h Empty weight: 18.000 kg Functional Lifting capacity: 6.000 kg Identification Serial number: 00005517 Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Pedjtr Ihispfx Afhspl Tyre brand: - Transport dimensions (LxWxH): 7.63x2.53x3.15 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2016, machine/vehicle number: 2010703, Empty weight: 3.070 kg Lifting capacity: 350 kg Working height: 1.400 cm Ppsdot Uyd Aepfx Afhsl Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Transport dimensions (LxWxH): 2.5x1.2x2.7 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2016, machine/vehicle number: CE161018, Empty weight: 3.070 kg Lifting capacity: 350 kg Ppedjxwivgepfx Afhel Working height: 1.400 cm Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 2.5x1.2x2.7 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2016, machine/vehicle number: CE160566, Empty weight: 3.070 kg Lifting capacity: 350 kg Working height: 1.400 cm Ppedpfxexwitxo Afhjl Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 2.5x1.2x2.7 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2011, operating hours: 876 h, machine/vehicle number: CE146106, Empty weight: 2.470 kg Lifting capacity: 300 kg Working height: 1.200 cm Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: - Transport dimensions (LxWxH): 2.45x1.2x1.53 Please contact PFEIFER GROUP for more information Ppjdpfoxkr Urox Afhsl

Condition: used, Year of construction: 2011, operating hours: 174 h, machine/vehicle number: CE145544, Empty weight: 1.655 kg Lifting capacity: 350 kg Working height: 820 cm Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 2.48x0.81x2.01 Please contact PFEIFER GROUP for more information Pjdjx A R Nlepfx Afhepl

Condition: used, Year of construction: 2011, operating hours: 954 h, machine/vehicle number: CE146102, Empty weight: 2.470 kg Lifting capacity: 300 kg Working height: 1.200 cm Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: - Transport dimensions (LxWxH): 2.45x1.2x1.53 Pjdpfxsxfgaxj Afhepl Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2011, operating hours: 1,153 h, machine/vehicle number: CE145079, Empty weight: 2.235 kg Lifting capacity: 450 kg Working height: 1.020 cm Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Psdpfx Afoxxpqyshopl Tyre brand: - Transport dimensions (LxWxH): 2.45x1.2x2.26 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2011, operating hours: 871 h, machine/vehicle number: CE145881, Empty weight: 2.235 kg Ppodpevd Ah Tofx Afhsl Lifting capacity: 450 kg Working height: 1.020 cm Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Transport dimensions (LxWxH): 2.45x1.2x2.26 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2011, operating hours: 814 h, machine/vehicle number: CE145021, Empty weight: 2.235 kg Lifting capacity: 450 kg Working height: 1.020 cm Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 2.45x1.2x2.26 Please contact PFEIFER GROUP for more information Ppjdpfx Afjwvplzjhjl

Condition: used, Year of construction: 2011, machine/vehicle number: CE145102, Drive: Wheel Empty weight: 2.235 kg Lifting capacity: 450 kg Working height: 1.020 cm Transport dimensions (LxWxH): 2.45x1.2x2.26 Ppedpfx Afjtr I Eqshsl Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2011, machine/vehicle number: CE145101, Drive: Wheel Empty weight: 2.330 kg Lifting capacity: 450 kg Working height: 1.020 cm Transport dimensions (LxWxH): 2.45x1.2x2.26 Ppjdpfstr I Nxex Afhel Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2011, machine/vehicle number: CE145087, Drive: Wheel Psdpfx Afstr Nckohspl Empty weight: 2.335 kg Lifting capacity: 450 kg Working height: 1.020 cm Transport dimensions (LxWxH): 2.45x1.2x2.26 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2011, machine/vehicle number: CE145100, Drive: Wheel Podetr N I Iepfx Afhepl Empty weight: 2.335 kg Lifting capacity: 450 kg Working height: 1.020 cm Transport dimensions (LxWxH): 2.45x1.2x2.26 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2011, machine/vehicle number: CE145044, Empty weight: 2.235 kg Lifting capacity: 450 kg Working height: 1.020 cm Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 2.45x1.2x2.26 Pedsv U I D Ispfx Afhopl Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2014, operating hours: 141 h, machine/vehicle number: GS6914-3395, Empty weight: 4.082 kg Lifting capacity: 454 kg Working height: 1.190 cm Front tyres / undercarriage remaining: 80 Ppedpfsxzyfaox Afhjl Rear tyres remaining : 80 Tyre brand: - Transport dimensions (LxWxH): 3.76x1.75x2.59 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2013, machine/vehicle number: 161712206, Empty weight: 5.129 kg Lifting capacity: 400 kg Working height: 1.730 cm Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Ppsdpfx Afeyaxfqohjl Tyre brand: Solideal Transport dimensions (LxWxH): 3.18x1.6x3.14 Please contact PFEIFER GROUP for more information