Used Set Bar for sale (21,967)

Condition: used, mileage: 1,001 km, first registration: 01/1991, color: grey, driver cabin: other, gearing type: other, Year of construction: 1991, Vehicle location: Bovenden, container locking, rear support Superstructure: Hookable Atlas set-down device on Roland roll-off frame (built 1994) ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Redpfxjp N Apao Adbebt - .

Condition: as good as new (ex-display), Year of construction: 2023, Manual cleaning is carried out using special gloves in the front section. The effectiveness of the cleaning is ensured by a 0-8 BAR wash pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure is adjustable from 0-8 bar. Technical data: Work surface: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg Spray pressure: 0-8 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior - Frame, feet, cover and housing made of stainless steel - Removable stainless steel panels above the tank - Flap can be opened upwards with 2 handles and gloves - Tempered glass window - Door opening/closing system supported by gas struts Rbodpfor Hm R Tox Adbst - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm - Stainless steel cartridge filter with pump (10/25/50 micron) - External mini-pneumatic oil separator

Condition: new, functionality: fully functional, Year of construction: 2024, This powerful, hydraulic pile rammer from Maruzen is a good choice if you are looking for a strong machine for striking steel and wooden piles. The Maruzen KH193 comes standard without impact piece. Easy and fast to use As many as 1920 blows per minute Operates on hydraulic power source such as a power pack or earth mover Can be used in wet conditions, even underwater Minimal service required; lubricate head every 50 hours and service every 500 hours. Rbodpfxertqydo Adbet Hydraulic powerhouse The KH193 pile rammer is a perfect choice when ramming steel pipes, for example 60 x 40 mm or ø 60 mm, but it is also suitable for wooden piles up to a diameter of 110 mm. It weighs 20 kg and is more powerful than our gasoline rammers. This type of pole rammer offers many possibilities: Maruzen's hydraulic powerpack is intended for mobile purposes and is known for its easy way to use. This powerpack UH070 is matched with the AY01H horizontal auger, the OH01 hydraulic one-man auger and the KH193 pile rammer from Maruzen. This type of powerpack offers many possibilities in: Assembly Fencing Foundation work Guardrail/boarding work Installing solar parks This hydraulic power pack is powered by a Honda GX200 gasoline engine and is delivered fully assembled, on a metal frame with large wheels. Benefits: Low fuel consumption; 1.6 Liters per hour at full power 20-25 Liters per minute Low noise level Light weight (40 Kg) Honda GX200 4 stroke engine (low emission) Very easy to use. EuroGate International offers affordable quality and service Maruzen is a reliable machine builder from Japan, for all kinds of hydraulic tools. The top brand offers excellent quality and service. Maruzen has been producing hydraulic machines since 1954.

Condition: not inspected (used), Year of construction: 2017, functionality: unexamined, input voltage: 72 V, type of cooling: water, No minimum price – guaranteed sale to the highest bidder! Set includes the following components: 2x inverter welding machines HighPULSE 552 RS 2x water cooling units WK-350 Special wire feeder DV-31 Twin + additional accessories (hose packages, torches) MACHINE DETAILS Electrical data (welding unit) Rjdpfxoyaqbks Adbebt Current range: 20 A – 550 A Voltage range: 15 V – 41.5 V Mains voltage: 72 V Mains current: 35 A

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, overall weight: 130 kg, total length: 1,200 mm, total width: 780 mm, total height: 1,280 mm, Equipment: foot remote control, TECHNICAL DETAILS Grommet size: 4 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,200 x 780 x 1,280 mm Net weight: 130 kg EQUIPMENT Rodpoyf A S Eofx Adbebt on castors with foot switch Note: The machine is sold without a riveting head.

Condition: like new (used), Year of construction: 2026, operating hours: 24 h, functionality: fully functional, machine/vehicle number: WLD-MODEL-SIZE, type of input current: AC, total height: 3,000 mm, total width: 3,000 mm, total length: 2,000 mm, input voltage: 240 V, overall weight: 8,000 kg, feed length X-axis: 2,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, warranty duration: 12 months, type of cooling: water, continuous power: 22 kW (29.91 HP), Weld overlay cladding is an advanced welding process which provides an anti-corrosion or wear resistant surface on a less corrosion or wear-resistant base metals. A prime example involves the deposition of a stainless steel or nickel-based alloy layer onto a carbon steel base material, thus not only giving it corrosion resistance but also lower cost compared to the use of a monolithic stainless steel or nickel alloy components (stainless steel or nickel-based alloy). With our advanced equipment and software, EQ Automation is able to deliver our customers a total weld overlay cladding solution that will give our customers better productivity and lifespan of their equipment. Welding Machine Sets: Robotic Welding, Quality Welding Consumables, Wires, Rods available!! Tig welding/cladding machine, CNC control, automatic control, 5-axis simultaneous movement. Fronius units, table from 1.5meters up to 3.0meters, vertical & horizontal Pre-Set Programmable, easy operation control panel. Friendly interface. Overlay welding for Balls, Valves, Flange faces, RTJ groove, Bevel etc. Rbsdeyaw Ecspfx Adbjt One touch, More Welding Solutions, Stocks for sale!!

Condition: excellent (used), For sale: Gaussmeter MAGSYS HGM09s from the renowned manufacturer MAGNET SYSTEME (MAGSYS) – a professional magnetic field meter designed for industrial, service, and laboratory applications. This device is used for precise measurement of magnetic induction (mT / mG) and is widely used in quality control, maintenance, diagnostics of magnetic separators, magnetic grippers, permanent magnets, as well as laboratory applications. — Technical condition • Fully functional equipment, powers on correctly • Clear display, responds to magnetic field • Normal signs of use • No information on current calibration (user calibration may be required if necessary) — Included in the set • MAGSYS HGM09s gaussmeter • 2 MAGSYS magnetic probes • Complete cabling • USB memory stick • Original transport case • Exactly what you see in the photos — Main features • DC magnetic field measurement • Units: mT / mG • Functions: AUTO, HOLD, ZERO (NULL), manual/automatic ranges • Data logging and retrieval capabilities • Robust, industrial-grade construction • Suitable for B2B / laboratory applications — Applications • Maintenance Rjdpfx Ajydfvkodbebt • Industry and manufacturing • Quality control • Magnetic separators and systems • Laboratories and technical services

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 334103309, Wema Probst Round Rod Milling Machine RHM200 I H/V-T2 - Year of manufacture: 2003 - Net weight: 1500 kg - Finished diameter: 50–200 mm - Max. single-sided cutting depth: 50 mm - Drive: PTO shaft Rbsdoyfup Aepfx Adbst

Condition: excellent (used), Professional industrial screwdriver by Atlas Copco, designed for continuous operation in assembly lines and production applications. True industrial-grade equipment – not a consumer retail product. Specifications and info: • Model: ETP STB34-06-106 • Power supply: 18V DC • Country of manufacture: Sweden • Year of manufacture: 2021 • Ergonomic, well-balanced design • Suitable for precision assembly and serial production Set includes: • Atlas Copco cordless screwdriver • 2x 18V Atlas Copco batteries • Atlas Copco charger • Everything visible in the photos is included Condition: Used, fully functional, with typical signs of use. No cracks, no play in the mechanism. The tool comes from industrial disassembly. Applications: • Manufacturing • Industrial assembly Rsdpfx Adeyc Rvaobobt • Production lines • Professional workshops An ideal alternative to buying new equipment – significantly lower cost while maintaining Atlas Copco quality.

Condition: excellent (used), For sale: professional installation tool (SETTING TOOL) for KOENIG EXPANDER® components, manufactured by SFC KOENIG. Model: ExTool 040-2 Rodpfx Ajyc Ig Ajdbjbt Type: Setting Tool / Installation Tool Application: Installation and activation of KOENIG EXPANDER® components Manufactured in: Germany The device is designed for controlled setting (activation) of plugs, restrictors, and valves of KOENIG EXPANDER® into precision bores – without threading and without heat treatment. — Condition • Very good technical and visual condition • No cracks or damage • Working element is straight, clean, and unworn • Normal, minor signs of use • Complete set exactly as shown in the pictures — Application • Installation of KOENIG EXPANDER® plugs • Automotive industry • Precision hydraulics • Hydraulic blocks, housings, machine components • Series production and maintenance — Set includes • KOENIG EXPANDER® ExTool 040-2 installation tool • Original carrying case • Working hose • Working container / reservoir • Manufacturer's manual • Accessories as shown in the photos

Condition: excellent (used), For sale: Professional, portable vibration calibrator from the renowned manufacturer PCB Piezotronics. Model: 394C06 Serial number: LW19236 Made in: USA The calibrator is designed for rapid verification and calibration of accelerometers in industrial, laboratory, and automotive (NVH) applications. — Technical and visual condition The device is in very good condition and well-maintained. Manufacturer's seal is intact (VOID IF SEAL DAMAGED). Normal, minimal signs of use. The equipment comes from a professional measurement environment. — Features and characteristics • Portable vibration calibrator • RMS / PEAK mode • CAL adjustment (+ / -) • Stable reference signal for sensor verification • Battery powered – ideal for field work • High repeatability and measurement accuracy — Rbjdpfx Adjyc Igvobet Applications • Accelerometer calibration • NVH systems (Noise, Vibration, Harshness) • Industry, automotive, laboratories • Maintenance, quality control — Included in the set • PCB Piezotronics 394C06 calibrator • Original transport case • Protective cover • Adapters / mounting accessories (as shown in the photos)

Condition: excellent (used), For sale: Hioki CT6711 – precision current probe, designed for accurate current measurements in laboratory, R&D, service, and industrial applications. The CT6711 model allows safe, non-invasive current measurement with high resolution and an extremely wide bandwidth, ideal for use with oscilloscopes and power analyzers. Key features: • Current range up to 30 A Rbjdpfoyc Idbjx Adbjt • Bandwidth up to 120 MHz • High measurement accuracy and stability • Fast range switching • Demag / Auto Zero functions • Robust, professional construction • Manufactured in Japan Condition: • Fully functional • Very good cosmetic condition • Equipment removed from laboratory / industrial use Included: • Hioki CT6711 current probe • Control unit • Full set of cables • Original carrying case • Manufacturer’s documentation (manuals) Ready-to-use device – no hidden defects. Applications: • AC/DC current measurements • Power electronics • Research and development (R&D) • Inverter, power supply, and drive servicing • Laboratories and maintenance departments

Condition: excellent (used), For sale: Professional digital microscope KEYENCE VHX-7000 – fully complete, in excellent working order, ready-to-use system for quality control, laboratory research, and production applications. ⸻ Configuration / Included • Main unit VHX-7000 • Original KEYENCE VHX monitor • Motorized XY stage + motorized Z axis • KEYENCE VHX-S770E objective lens • Control panel (manual controller) • 2× original KEYENCE carrying cases – Lens Case • Cables, accessories, mounting components • Manufacturer's documentation ⸻ Condition and Calibration • Technical condition: very good • KEYENCE calibration certificate – 12/2023 (Acceptable) • Industrial equipment, Made in Japan • No modifications, complete nameplates ⸻ Applications • Quality control (QC) • R&D laboratories • Surface analysis, defectoscopy • Measurement and image documentation in production ⸻ Why choose this unit • Full configuration (monitor + XY + Z + lens) • Recent calibration Rsdjyc H Rgspfx Adbebt • Original cases and accessories

Condition: good (used), Schmedt PraForm 21-50 joint-setting press Book press with a joint forming. Production Schmedt, Germany. The machine is in very good condition, ready for production. Technical data: Rodjya It Rjpfx Adbsbt max format: 450 x 520 x 100 mm Weight 264kg Power supply 230V + compressed air.

Condition: used, Technical details: dimension machine xH: 1,8 x 1,1 x 1,0 m Rjdpfxjxu Dx Dj Adbobt

Condition: used, Year of construction: 2022, - FANUC 0i-TF CNC Control - 60° slant bed - Cross slide with linear guides - Part separator Rbsdpswrp Dpefx Adbjt - Coolant unit - Chip conveyor - Power on time: 2775 h - Machining time: 743 h - Year of manufacture: 2022 LNS Sprint 552 - Bar feeder - Bar diameter: 5 - 52 mm - Bar length: 3200 mm - Loading capacity: 11, 9, 8 bars Specifications Main spindle: - Bar capacity diameter: 32 mm - Max. spindle speed: 5000 rpm - Collets DIN6343: 171-E A36 - Collets DIN6343: 161-E A25 Working area: - Workpiece diameter/length: 32 / 75 mm - Travel in X: 300 mm - Travel in Y: 175 mm Cross slide "Gang Type": - Rapid traverse X: 12 m/min - Rapid traverse Z: 20 m/min - Number of tools: 7 - Tool shank diameter: 20 mm - Tool holder (square): 12 x 12 mm Coolant system: - Coolant pressure: 6 bar - Tank capacity: 100 l Performance data: - Power 100%/40% DC: 3.7 / 4.4 kW - Torque: 20.2 Nm - Energy consumption: 5.4 kWh - Total power: 8.8 kW - Operating voltage: 400 V - Rated current: 16 A Dimensions & weight: - Footprint: 1900 x 1030 mm - Weight: 1230 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 273.526.15, continuous power: 9 kW (12.24 HP), For sale: industrial CNC machine for plasma sheet cutting, Messer Cutting Systems EasyTherm 3600, fully equipped for production cutting. Large working area, table dimensions 12,000 × 2,000 mm. The machine is fitted with 4 cutting heads (1 plasma, 3 oxy-fuel) mounted on the gantry. Equipped with exhaust system. The machine is fully functional and can be inspected and tested in operation. Specifications: • Model: EasyTherm 3600 • Year of manufacture: 2015 • Working area: 12,000 × 2,000 mm • Control/CNC: GlobalControl-S (GC-S) Rbedpfxjyfuxqo Adbst • Machine No.: 273.526.15 • Power supply: 3×400V / 50Hz • Power: 9 kVA • Installed power: 9 kVA • Plasma cutting source: Kjellberg HiFocus 280i neo

Condition: used, Year of construction: 2024, operating hours: 1 h, 2024 | Atlas Copco Qas 20 UNUSED | Used Generator Set | 1 hours 📍Location: Estonia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 14900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Rsdpfeyaccgsx Adbsbt 👷‍♂️ Inspected by an independent expert 21 inspection points 20 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Almost brand new, but the case is damaged. Radiator cover missing. The unit was involved in a car accident leading to damages on the outside but the Genset is fully working condition. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40196 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2011, condition: used, Technical details: workpiece dia.: 80 mm workpiece length: 1.000 - 4.300 mm Rbjdeyddd Tepfx Adbet control: - feed speed: 500 m/s power consumption: 4,0 kW weight of the machine approx.: 1440 kg

Condition: excellent (used), Year of construction: 2016, bar length: 3,000 mm, bar diameter (max.): 80 mm, Bar feeder IEMCA MASTER 80 HF WP Year of manufacture: 2016 Max. bar diameter: 80mm Max. bar length: 3,000mm Redpfx Adjyf Dp Sobjbt Slightly used We have two identical units available.

Condition: used, This orbital welding system, model: ST-95 Tesch, will be auctioned online in our industrial auction / machinery auction (follow-up auction) due to the building relocation of Siemens Erlangen – including laboratory equipment, electrically height-adjustable desks, office chairs, and technology. Rbsdpfx Asydbk Dsdbot

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester, barometer -Manufacturer: TGL, Manometer 0 - 0.1 bar, unused -Type: Ø 160 mm 0-1000 mmWs -Quantity: 1x pressure gauge available -Dimensions: 200/160/H100 mm Rbodpfx Adeyfn Hnebst -Weight: 2.7 kg/pc.

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer -0.4-0-0.6 bar unused -Type: Ø 160 -0.4-0-0.6 kg/cm² -Number: 8x pressure gauges available -Price: per piece -Dimensions: 200/160/H50 mm Rbjdpfx Ajyfnt Ijdbot -Weight: 0.5 kg

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer 0 - 25 bar / 0-2.5 MPa, unused, original packaging -Type: Ø 150 mm Rsdpfoyfngzox Adbebt -Number: 2x pressure gauges available -Price: per piece -Cardboard dimensions: 195/185/H70 mm -Weight: 1.0 kg/pc.

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester, barometer Rbsdpfeyfm H Tox Adbst -Manufacturer: HG, Manometer 0 - 0.016 bar, unused, original packaging -Type: Ø 160 mm 0-160 mmWs -Quantity: 1x pressure gauge available -Cardboard dimensions: 200/180/H50 mm -Weight: 1.6 kg.