Used Shell And Tube Heat Exchanger for sale (23,078)

Year of construction: 2018, operating hours: 4,700 h, condition: ready for operation (used), functionality: fully functional, For sale are four used cogeneration units, type ENGUL 310 XACB, in an open-skid design. The units consist of a gas engine, a generator, and the corresponding technical components. The systems have previously been operated with syngas/synthesis gas and are suitable for professional operators, plant builders, as well as projects for reuse, overhaul, or technically verified fuel conversion. Rcedpfozyc Eaox Airoh Of particular interest is the low operating hours of approximately 4,700 engine hours. In addition, photo documentation and operating displays are available, which document the synchronous parallel operation of the four units.

Condition: used, functionality: fully functional, machine/vehicle number: YS2P4X20002014847, mileage: 10,39,604 km, first registration: 04/2006, color: blue, axle configuration: 4x2, gearing type: mechanical, fuel type: diesel, Year of construction: 2006, Scania truck with Rimo trailer in overall good working condition. The truck and trailer have been regularly used for work, and all necessary maintenance has been carried out on time. During the most recent trailer service alone, more than 10 k€ was invested in maintenance and repairs. The service was carried out by a professional workshop. All tires have been renewed and have seen very little use since replacement. As there has been no work for the vehicle recently, the annual technical inspection has not been completed. However, the inspection can be arranged upon the buyer’s request and on buyers account. The truck has been standing over the winter, so the brakes may need to be released before collection. There might be also some minor issues with the trailer hydraulics that may require attention. Apart from these points, the truck and trailer are in working condition. For a serious buyer, we are ready to prepare the truck and trailer for collection. Export sale with 0% VAT is possible upon agreement and subject to applicable requirements. Rsdpfx Ajzwmumoirjch Please feel free to contact us for any additional information or questions. Reasonable offers are welcome.

Condition: used, This listing is for 1 of 2 Ortho Biovue System Heat block-32 Rcjdpfx Aisxzh Rksroh

Condition: used, Year of construction: 1997, functionality: fully functional, power: 1,000 kW (1,359.62 HP), Boiler with feed system Rcsdpev D Uz Eofx Aireh - Year of release: 1997 - manufacturer: Komforts - Power 1 mW. - moving floor supply system with hydraulic station, - chimney, - pumps, - control, - hot water accumulator.

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 65 cycles/minute; filling range: 1-400ml; accuracy: ±0.5%; tube diameter: 10-50 mm (one mould is required for each tube diameter); tube length: 80-230 mm; number of filling heads: 1; storage hopper capacity: 45L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 9kW; compressed air: 0.4-0.6MPa; machine dimensions: L2000xW1160xH2100 mm. Rodpfxov Nlduj Airsch Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for pre-made tubes (with closed cap) made of plastic, aluminum or laminated composite material. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 80 cycles/minute; filling range: 1-400ml; accuracy: ±0.5%; tube diameter: 10-60 mm (one mould is required for each tube diameter); tube length: 50-240 mm; number of filling heads: 1; storage hopper capacity: 40L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 9kW; compressed air: 0.4-0.6MPa. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Rcedpfx Aov Nldzsirjh

Condition: good (used), functionality: fully functional, Year of construction: 2009, Used tube bending machine from Jutec Type: 5000 Capacity: up to approx. 40 mm Mandrel length: 4500 mm CNC controlled Automatic head Manually rotatable head with hydraulic clamping Incl. 3 sets of tools Year of manufacture: 2009 Rjdpfx Asyfmwxoiroch Very little used

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6415 1 x Comcount Packaging Systems bowl feeder and 1 x GIC Gainsborough VFFS bagger with 1 x outfeed conveyor. Model of Comcount bowl feeder - BFWT. Manufacturer - Comcount Ltd. Date of manufacture – 2019. Weighing range - 150g-500g. GIC Gainsborough Engineering model - VFB2000. Manufacturer - Gainsborough Engineering Ltd Date of manufacture – 2008. Sealing bars - 290mm horizontal & 320mm vertical. Reel width - 620mm. Current film - 280mm. Forming tube - 80mm diameter. Rcsdey Hlw Iepfx Airoh Outfeed conveyor - IC350. Belt width - 295mm. Outfeed height - 910mm high. Overall footprint - 4.3m long x 3.45m wide x 3.1m high. Condition – Very good. Only been used 5-6 times in 2.5 years.

Condition: ready for operation (used), The FluidX HT121TS is a semi-automatic sheet heat sealer designed for laboratory plate sealing. Rcsdpfx Aoy D D Umsiroh Key Technical Specifications Device Type: Semi-automatic sheet heat sealer. Weight: Approximately 5 kg (net). Application: Used for applying thermal seals to microplates, typically in conjunction with FluidX sample storage tubes. Format Compatibility: Designed to handle various plate formats common in automated workflows. Operational Features Variable Temperature: Supports a range of temperatures for different sealing materials. Manual/Semi-Automated Integration: Compatible with both low-throughput manual tasks and high-density automated storage systems. Good working condition. Please check out our other listings as well.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH stationary stone crushing plants are designed with a focus on high efficiency and durability, offering long-lasting industrial solutions. Each plant is specifically configured based on the hardness and abrasiveness of the material to be crushed and the desired product size. With production capacities ranging from 50 t/h to 1,000 t/h, they perfectly adapt to projects of different scales. The crusher types used in the plants are selected according to material properties to achieve maximum performance. Our design team creates optimized 3D layout plans using feeder, crusher, screen, bunker, washer, and conveyor components. This ensures high capacity, low energy consumption, and minimal maintenance costs throughout the production process. Each plant is custom-designed to suit the investment budget and operating conditions. Our engineering team offers the most suitable projects and proposals to prevent unnecessary expenses. CONSTMACH stationary crushing and screening plants are equipped with high-quality electronic components from SIEMENS and SCHNEIDER, and minimize operator intervention thanks to a PLC-based fully automated system. This provides safe, fast, and stable production. Fixed Stone Crushing Plant Technical Specifications Production Capacity: 50 – 1,000 t/h Type of Material to be Crushed: Varies according to the desired product type Final Product Dimensions: Adjustable upon request Crusher Types: Jaw, impact, cone, or vertical shaft crusher options Why Choose a Fixed Stone Crushing Plant from CONSTMACH? CONSTMACH makes a difference with its engineering approach that offers customized solutions to each customer. Our plants operate continuously for many years thanks to high-quality components, energy-efficient designs, and reliable automation systems. With our after-sales support service that prioritizes customer satisfaction, we are by your side at every stage of your investment. CONSTMACH is the right choice for fixed rock crushing plants offering powerful performance, low operating costs, and maximum efficiency. What Do We Do at Constmach? Rcjdpfx Aoxqhzhsiroh Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Year of construction: 2001, condition: used, functionality: fully functional, Perfect condition including price: -Onion (any kind of type) & Garlic peeler -unpeeled product hopper -transportation conveyer (for peeled product, waste, inspection table with platform) All equipment is fully stainless steel I have also for additional cost a lot of spare parts. New Tecnoceam peeler 255 (without other equipment) cost almost 200k euro ! Automatic air peeling machine for garlic and onions – PAC 255 (995) The machine is suitable to peel a wide range of onions with spherical/elongated/flat shape, shallot and ginned garlic cloves intended for the fresh product market, for freezing or for preserves (in oil preservation/pickles, sauces, etc.). ADVANTAGES: • Homogeneous and product caring peeling; • High flexibility in particular for the treatment of a wide range of onion shapes and sizes; • Long-lasting abrasive components and quick replacement of peeling components; • A wide range of peeling nets is available to match different product calibres; • Complete automation and customisation of the continuous process cycle control panel adjustments: loading product time (so the inserted quantity), process time (peeling cycle duration); • Easy access to inner components for cleaning and maintenance; • Possibility to convert from onion peeling machine into garlic peeling machine and vice versa; • It is suitable for a multiple line (i.e. 2/3 machines 255(995) model in a row). Approximate production range: Onions 400 – 1500 kg/hour (for different sizes, see the brochure); Garlic 300 – 500 kg/hour Overall dimensions: 3.200 x 1.700 x H 2.300 mm (including automatic feed elevator) Processable product caliber: Min. diameter 25 – max. 100 mm; Max. stem length 30 mm Rodpfxey I Dlms Airjch Cycle duration: 1 – 2 minutes

Condition: used, We offer Viessmann natural gas boilers: 1. Viessmann gas boiler TYPE SX 1 Heating output 225 kW Including pump and valves Redpjy Dpk Hjfx Airech 2. Viessmann gas boiler TYPE SX 1 Heating output 170 kW Including pump, valves, and piping You will receive a discount when purchasing both boilers.

Condition: used, Year of construction: 2007, functionality: fully functional, power: 100 kW (135.96 HP), heating capacity: 100 kW (135.96 HP), nominal heat output: 100 kW (135.96 HP), nominal power: 100 kW (135.96 HP), tank capacity: 5,000 l, We are offering this used HDG Bavaria 100kW heating system with articulated arm discharge, manufactured in 2007. Manufacturer: HDG Bavaria Model: 100kW with articulated arm discharge Year of manufacture: 2007 Rsdpjyrhd Tofx Airoch If you have any questions or require further information, please feel free to send us a message or give us a call. The system is currently still in operation and can be inspected. The offer includes a 5,000L buffer tank, control unit, and various spare parts (which we have kept in stock as a precaution).

Condition: used, Year of construction: 2007, pipe diameter (max.): 35 mm, overall weight: 2,700 kg, total length: 2,400 mm, total width: 1,400 mm, total height: 2,000 mm, input voltage: 380 V, Tube forming machine Brand: BLM Model: TUBE-FORM Year: 2007 Serial number: 415050200004 Weight: 2700kg Power: 12KVA Three-phase 380V Dimensions: 2400x1400x2000(h)mm Maximum tube diameter: 35mm Pushing force: 3.5t Clamping force: 5t Max. working stroke: 130mm Rsdpfxjx Tt H Re Airsch

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. Redpfx Asykvdloiroch - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: used, ? Polygonmach PVB150 Mobile Concrete Plant | Cold asphalt plant, RCC mixing plant, soil compound mixing plant. Emulsion mixing plant ? Polygonmach PVB150 is a next-generation mobile concrete plant designed to meet the demands of modern construction projects for speed, flexibility, and cost-efficiency. It offers dual-mode production – both Volumetric and Batch type operation – on a single platform, delivering perfect compatibility for all project types. ✅ Dual-Mode Flexibility: • Volumetric Mode: On-demand, instant production up to 200 m³/hour directly at the site • Batch Type Mode: Precision recipe-based production up to 100 m³/hour ✅ Key Features: • Fully Automatic or Manual Operation: User-friendly control panel allows seamless control • Precision Weighing System: Ensures accurate dosing, minimizes material waste • Multiple Mix Recipes: Easily switch between different mix designs • Separate Storage Bins: 3x8 m³ aggregate hoppers, 5-ton cement silo, water & additive tanks • Filling Conveyor: Fast and efficient loading • Quick Setup: Ready to operate in just 10 minutes • Fully Mobile: Maximum ease in site-to-site transportation • Low Logistics & Transport Costs: On-site production eliminates ready-mix losses • Sustainable Production: Mix only what you need, when you need it • Recycling-Friendly: Supports the use of recycled materials when needed ⸻ ? Multi-Purpose Capability – One Platform, Many Solutions: In addition to concrete production, the PVB150 is engineered to serve as: • Mechanical Stabilization Plant • Cold Asphalt Mixing Plant • Emulsion Mixing Plant • Soil Compound Mixing Plant This multi-functional system makes Polygonmach PVB150 the most versatile solution on the market for road construction, infrastructure development, and short-term or small-to-medium scale projects. ⸻ Rsdpfjyf Dbnjx Airoch ?? 100% Made in Turkey | Smart Technology | High Performance | Eco-Friendly Operation ✅ Replace fixed plants with a smarter solution. ✅ Reduce setup costs, increase mobility, boost site efficiency. ⸻ ? Contact us today and transform your jobsite! ? ? ?

Condition: used, HB-Therm HB-100 U1 temperature control unit, Temperature control, Liquid temperature control, Industrial temperature control, Thermolator, used machine Manufacturer: HB-Therm Type: HB-100 U1 Overall dimensions: 200 × 650 × 500 mm Year of manufacture: 2008 Technical data: Rjdpfx Asyzmagoiroch Maximum operating temperature: 100 °C Heating capacity: 8 kW Cooling capacity: 30 kW Heat transfer medium: water

Condition: used, Year of construction: 2005, functionality: fully functional, power: 6,000 kW (8,157.72 HP), tank capacity: 22,070 l, Sale together with the building. Year of construction 2005 Supplier - JÄRNFORSEN Capacity - 6 MW Fuel - Bark, dust, chips (wet) Rcjdpfxoyyznvo Airjh Design pressure - 6 bar Design temperature - 165°C Flue gas temperature - 200°C Supply temperature - 120°C Return temperature - 100°C Boiler efficiency - 85% Dust emission - 100mg/Nm3 CO-content - 200 ppm Nox -content 85 mg/MJ Yearly production - 22 000 MWh Estimated fuel consumption ~50 000 m3 per year

Condition: new, Year of construction: 2026, BIEGEMASTER double bender - Model XBend 6.1,25 Effective length: 6400 mm Bending capacity Steel 400 N/mm²: 1.25 mm V2A 600 N/mm²: 1.00 mm Aluminum 190 N/mm²: 2.00 mm Clamping capacity (closed seam): 0.5 mm steel Number of uprights: 4 pieces Driven upper bending joints: 4 pieces Driven bending joints bottom: 4 pieces Incl. touchscreen CNC control with automatic depth stop Rcjdpjvhc Dpjfx Airsh Incl. electric shears BIEGEMASTER Up- and Down- Bending machine - model XBend 6.1,25 Working length: 6400 mm Bending capacity steel 400 N/mm²: 1.25 mm stainless steel 600 N/mm²: 1.00 mm aluminum 190 N/mm²: 2.00 mm Hemming capacity (closed hem): 0.5 mm steel Stands + Tension Arms: 4 pcs. Driven linkage joints upper beam: 4 pcs. Driven linkage joints down beam: 4 pcs. Incl. touchscreen control and automatic back-gauge Incl. electric cutter

Condition: used, mileage: 56,237 km, first registration: 12/2022, fuel type: diesel, tire size: 445/95R25, axle configuration: 6x6, fuel: diesel, total length: 11,930 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, AdBlue, air conditioning, crane, = Additional Options and Accessories = - Digital tachograph = Further Information = Axle Configuration Tire size: 445/95R25 Front axle: Steerable; Tire tread depth left: 50%; Tire tread depth right: 50% Rear axle 1: Steerable; Tire tread depth left: 50%; Tire tread depth right: 50% Rear axle 2: Steerable; Tire tread depth left: 50%; Tire tread depth right: 50% Redpfx Asz I Sttjirsch Weights Unladen weight: 35,850 kg Payload: 150 kg GVW: 36,000 kg Functional Lifting capacity: 50,000 kg Crane: Year of manufacture 2022 Condition Damage: None Identification License plate: 34-BTS-3

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,613 h, functionality: fully functional, machine/vehicle number: B4/19-002/LV, total height: 2,591 mm, total length: 2,990 mm, total width: 2,438 mm, fuel: liquefied natural gas (LNG), overall weight: 5,000 kg, type of cooling: water, empty load weight: 4,900 kg, Equipment: documentation/manual, As part of the demonstration, the compression in all cylinders can be shown to be 15 bar. Electrical power – 50 kWe Thermal power – 80 kW Gas consumption – 14.6 Nm3/h Engine manufacturer – MWM Number of cylinders – 4 Rcedpez Rxgyjfx Airoh Generator manufacturer – Marelli Type – MJB 225 SA4 Power – 62.5 kVA Rated power – 50 kW Frequency – 50 Hz Voltage – 400 V

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand licence for the “SOLIDWORKS Professional” software Redoz A D Aiopfx Airech Items for sale: 2 x SOLIDWORKS Professional with the following features incl. Toolbox incl. SOLIDWORKS Visualize Standard incl. PDM Standard (data management) incl. eDrawings Professional incl. Costing Condition: This offer is for a second-hand licence, which may show signs of use (e.g. activations that have already been used). The licence has been tested to ensure it is fully functional Packaging and dispatch: Proper transfer of the licence and worldwide dispatch of the documentation are available on request! Before handover, proof of successful licence deactivation (screenshot) will be provided for you. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Canon imagePROGRAF GP-4000” large-format printer Item for sale: 1 x Canon imagePROGRAF GP-4000 with the following specifications: Rcjdpoz Et T Nefx Aireh incl. roll unit incl. roll holder set incl. WT36-600 Not the right configuration? We can easily configure the machine to your requirements. Please feel free to contact us! Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: new, Year of construction: 2026, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Rodpfx Aiog Dvdceroch Made in Germany The pictures show you an older bigger machine

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, LIQUIDATION SALE – COMPLETE STEAM BOILER SYSTEM – IMMEDIATE AVAILABILITY Due to the closure of the production facility, we offer for sale a complete industrial steam generation system based on a UNICAL BAHR’12 800 high-pressure steam boiler, manufactured in 2020. The system was used as a complete installation and is offered together with the burner, control system, water treatment equipment and fuel storage tanks. Main technical data • Manufacturer: UNICAL • Model: BAHR’12 800 • Year of manufacture: 2020 • Steam production capacity: 800 kg/h • Approximate useful thermal output: 545 kW • Maximum design pressure: up to 12 bar • Boiler type: horizontal fire-tube steam boiler • Fuel: light fuel oil • Condition: excellent, used • Functionality: fully functional • Complete technical documentation available The complete system includes: 1. UNICAL BAHR’12 800 steam boiler 2. RIELLO RL70 two-stage oil burner 3. Electrical control cabinet with automation 4. Boiler accessories and safety equipment 5. Water treatment station 6. Two double-walled fuel tanks, each with a capacity of 5,000 litres The BAHR’12 series is designed for industrial steam generation and features a robust fire-tube construction with a wet-back combustion chamber. The system is suitable for industrial process applications requiring a reliable steam supply. Key advantages • Complete and ready-to-relocate boiler installation • Relatively recent year of manufacture – 2020 • Boiler, burner, controls and auxiliary equipment offered as one package • Water treatment equipment included • Total fuel storage capacity of 10,000 litres • Full documentation available Rcedpfx Ajy N Sq Hoirsh • Immediate availability The equipment can be inspected at the production facility in Panoszów, Poland. Liquidation price: EUR 59,000 net, EXW, negotiable. Preference will be given to buyers able to complete the transaction and collect the equipment quickly. Additional photographs, technical documentation and information concerning dismantling and loading are available upon request.