Used Short Taper Flange for sale (8,823)

Condition: new, Year of construction: 2025, operating hours: 1 h, power: 200 kW (271.92 HP), pressure (max.): 13 bar, New variable screwcompressor ALMIG Variable XP 200 air cooled Controller: Aircontrol Premium Year 2025 Fodpfxjzm Nu Uo Aptjgg Hours: 1 h new condition, available short.(4 weeks) Technical specifications: type: Variable XP 200 Possible operating pressures of the system: 5 to 13 bar Quantity delivered at 5 bar : 9.63 to 43.58 m³/min at 6 bar : 9.80 to 38.85  m³/min at 7 bar : 9.92 to 35.00 m³/min at 8 bar : 9.65 to 33.00 m³/min at 9 bar : 9.61 to 31.25 m³/min at 10 bar : 9.56 to 30.20 m³/min at 11 bar : 9.50 to 28.75 m³/min at 12 bar : 9.43 to 26.26 m³/min at 13 bar : 9.37 to 25.01 m³/min Installed power: 200 kW Protection class / Insulation class Drive motor: IP55 / ISO F Operating voltage / frequency: 400 V / 50 Hz Sound pressure level (DIN 45635 T13) : 78 dB (A) Compressed air connection: flange DN 100 Dimensions and weight Length : 3300 mm Width : 1860 mm Height : 1945 mm Weight : 4320 kg Visit our store. We´ve got a lot of compressors and dryers on stock.

Condition: used, Flange mounting, driving flange -Chuck flange with: driving pin -Outer diameter: 260 mm -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 8 Fgodjd Hcq Iopfx Apteg -Hole circle: Ø 171.4 mm -Weight: 14 kg

Condition: used, Flange mounting, driving flange -Chuck flange with: driving pin -Outer diameter: 315 mm -Short taper mount for: bayonet disc mounting DIN 55027 Fgedpfx Aed Hcq Nopteg -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 16 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate Fgodpfsd Hcq Usx Aptog -Outer diameter: 250 mm -Short taper flange for: bayonet disk mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 11 kg

Condition: used, Flange mounting, driving flange -Chuck flange with: driving pin -Outer diameter: 250 mm -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 8 Fjdpfjd Hcq Rsx Aptegg -Hole circle: Ø 171.4 mm -Weight: 17 kg

Condition: used, Flange mount -Chuck flange for: jaw chuck -Outer diameter: 215 mm Fgjdsd Hcqzspfx Apteg -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 9 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for drive heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 305 mm -Short taper: 8 -Number: 1x discs available Fsdpfxochyygs Aptsgg -Price: per piece -Weight: 15.3 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for drive heart, three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 230 mm -Short taper: 102 mm -Number: 3x discs available -Price: per piece -Weight: 9.7 kg Fedpfxjchyyie Aptegg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for drive heart, three-jaw chuck, four-jaw chuck, face plate Fsdpechyykefx Aptsgg -Outer: Ø 207 mm -Short taper: 6 -Number: 1x discs available -Price: per piece -Weight: 6.8 kg

Year of construction: 2021, condition: excellent (used), Insert nut (insert sleeve) machine, Stafast HFM-CF. The machine is configured for M8 nuts with a large flange. Fgodpfx Aoy Ui Tijptjg The machine is in very good condition. Ready for use.

Year of construction: 2021, condition: used, functionality: fully functional, T-nut inserting machine for Large Flange T-nuts Fgodpfjzbu R Eex Aptog

Condition: new, maximum load weight: 50,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt from the equipment list. A complete equipment list is available upon request. SWAN NECK Swan neck in SNT design to optimize the loading area length, length approx. 3,700 mm, with a bevel at the rear of approx. 1,000 mm x 10°. For semi-trailer: 4 x 2, 6 x 2, and 6 x 4. - Steel front wall, plug-in, approx. 400 mm high - 3 kW electro-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches. - 1 pair of plug-in aluminum side walls on the swan neck, approx. 400 mm high, in anodized finish. - 1 plug-in aluminum rear wall on the swan neck, approx. 400 mm high, in anodized finish. - 2-inch kingpin - Mounting area in the rear section of the swan neck for aluminum approach ramps. - Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) LOADING AREA Extendable loading area, length approx. 8,800 mm, with a bevel at the rear, approx. 500 mm x 10°. A recess in the loading area extends into the bevel to accommodate the excavator arm, approx. 3,850 x 750 x 210/290 mm (L x W x H). Pneumatic locking system with tapered locking pin and reinforced locking positions. The supply lines are protected in the extendable beams and automatically adjust to the respective loading area length. - TPMS tire pressure monitoring system according to ECE R 141. - BPW axles and suspension, 1st axle with steered trailing arm, all other axles with hydro-mechanical forced steering. - 1st axle with electro-magnetic reverse lock via reverse gear and can be manually activated. - Technical axle load: 12,000 kg each - Air suspension with lifting and lowering valve. - Tires 245/70 R 17.5 3PMSF, twin tires. Manufacturer of our choice. - Locking of the loading area with tapered welded-on locking profiles every approx. 250 mm. - 1 intermediate table, approx. 300 mm wide, for the extension tube with a large cross-section. - Extendable widening elements (galvanized) by approx. 230 mm per side (without wooden planks). - Wheel arches with square climbing strips, approx. 15 x 15 mm in front of the axles, continuously open up to the transverse support of the swan neck, approx. 700 x 410 mm (W x D). - Wheel arches with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D). - Control valves for the hydraulic ramps on the right side of the vehicle. - Steering from the front and rear can be operated via a cable remote control, with single-axle control, without installation in the semi-trailer. Fgsdpfxjtx Nwne Aptog HYDRAULIC LOADING RAMPS DR-15/60-900-4350-KG-HV-M A pair of two-part steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm. The surface of the large ramp section is divided into two: sheet metal surface with square climbing strips approx. 15 x 30 mm every approx. 200 mm on the outside and rubber surface on the inside. Hydraulically folding ramp tips, ramps can be individually moved outwards by approx. 235 mm and inwards by approx. 215 mm hydraulically. Maximum load and approach angle according to the technical data sheet: C465501 - Rubber floor Super Grip approx. 25 mm and sheet metal floor approx. 5 mm as additional reinforcement on the bevel of the loading area. BRAKING SYSTEM Braking system from WABCO EBS-E according to EU regulations. Without connection cable to the semi-trailer tractor. LIGHTING

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Fgsdpfxszy Ndce Aptjg Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Year of construction: 2026, condition: new, Suitable for automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools, and optionally profile tools using the disc electroerosion process. Accessories: Total enclosure, SK 40 or 50 workpiece carrier according to preference, Cooling unit for dielectric, Automatic fire extinguishing system, Measuring probe, SK 40 or 50 measuring mandrel depending on workpiece carrier, Alphanumeric keyboard for data management, Software package for peripheral machining of end mills and jointing cutters, linear machining in all common axis directions, Software package for compact and radius machining, profile cutters in path-travel and plunge-cutting processes, Software package for profile tools, 4-path program for peripheral electrodes, Software package for circular saws for complete machining of tooth backs and flanks of all common geometries, Automatic central lubrication, 1 short dressing holder, 1 mounting flange for erosion wheel. Machine is brand new!! Originally packed and full warranty from Vollmer! Cutter outer diameter: max. 250 mm Shank tool diameter: from 10 - 100 mm Outside diameter of disc-shaped tools: 380mm cutting length: Max. 20 mm Cutting length: Max. 20 mm Tangential clearance angle: max. 6 ° Radial clearance angle: -15° to + 6° Chamfering: automatic max. 70° X axis travel: 280 mm Z-axis travel: 330 mm Fgodey T It Ejpfx Apteg workpiece carrier cone: SK 50 Y axis travel: 280 mm Workpiece carrier cone: SK 50 A-axis rotation range: 360° B-axis swivel range: +/- 30 ° Tool weight max: 20 kg clearance angle: 30° Dimensions L x W x H: = 1905 x 2520 x 2430 mm Connected load: 3.4 kW (400 V / 50 Hz) colour: grey RAL7045 / RAL 7047 Diameter of rotating electrode: Max. 150 mm Rotational electrode speed: 80 - 1500 rpm weight: approx. 3000 kg

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 1,100 mm, overall weight: 3,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2007. This Weiler E55X1000 features maximum turning diameter of 315 mm and a a center distance of 1100 / 2100 mm. It is equipped with a Sauter 8-fold tool system and a spindle speed range of 1 – 2500 rpm. If you are looking to get high-quality turning capabilities, consider the Weiler E55X1000 machine we have for sale. Contact us for further details regarding this machine. • Internal taper: Metric 90 • Spindle diameter in front bearing: 120 mm • Spindle bore: 83 mm • Flange diameter: 500 mm • Maximum turning diameter: 315 mm • Maximum torque: 1600 Nm • Tool system: Sauter 8-fold • Number of tool positions: 8 • Tool shank size: 32 x 25 mm • Turret interface: Capto C4 • Number of face slides: 1 • Center distance: 1100 / 2100 mm • Turning length: 340 mm • Tailstock taper: MK 5 • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Maximum tailstock travel: 1000 / 2000 mm • Continuous duty speeds (S1):Gear stage I: 89 rpmGear stage II: 355 rpm • Emission level: 80 dB(A) • Operating voltage: 400 V • Control voltage: DC 24 V • Connected load: 30 kVA • Nominal current: 43 A • Frequency: 50 Hz • Main fuses: 50 A • Condition note: Ball screw in Z axis makes noise, but dimensional accuracy is not affected Additional equipment • Extraction system Technical Specification Fgodpfx Apsy Em A Aetjg Counter Spindle No Driven Tools No

Condition: used, Year of construction: 1982, Technical details: grinding diameter: 600 mm grinding length: 3000 mm centre height: 315 mm workpiece weight max.: 3000 kg work piece spindle speed: 8 - 120 U/min grinding wheel motor: 25 kW grinding wheel speed: 45 m/sec grinding wheel width x diameter: 750 x 80 mm table speeds: 30 - 4500 mm/min feeds of grinding head: 0 - 5 mm/min table swivelabel +/-: 7,5 ° total power requirement: 55 kVA weight of the machine ca.: 18 t dimensions of the machine ca.: 11,5 x 4 x 2,2 m - Internal grinding device Fgjdpfx Asvb Dl Usptsg - taper grinding up to 10,1° based on diameter - automatic grinding cycle - grinding wheels and flanges - dressing device - coolant attachment - dust exhauster, various steady rests *

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm Fgjdpfezgu Igsx Aptog max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Condition: used, Year of construction: 2023, machine/vehicle number: 1811058641, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a wire erosion machine manufactured by WEISSER, model: Univertor 8C. TECHNICAL DETAILS Three-phase operating voltage: 400 V AC Frequency: 50 Hz Total connected load: 34 kVA Control voltage: 24 V DC Magnet voltage: 24 V DC Fodpjzy Ukhjfx Aptogg Rated machine current: 49 A Main connection fuse: 100 A Short-circuit withstand current: 50 kA

Condition: excellent (used), Year of construction: 2019, Hainbuch centroteX quick-change system (2019 model) • 2x centroteX M machine adapters (A037017.0382B): o Short taper size: KK8 o Drawbar connection: M85x2 o Length: 53mm o Opening: 78mm • 1x TOPlus mini Axfix size 65 (A038531.0015C) o ID no.: 10000678 o Length: 136mm • 1x TOPlus mini Axle pull size 65 (A038530.008C) o ID no.: 10000676 o Length: 134.5mm • 1x Hainbuch (HWR) InoFlex VT026 – 4-jaw chuck o Length: 179mm o Diameter: 210mm • 1x Forkardt 3-jaw chuck (3QLC 250-72 Z8-S12) o Length: approx. 155mm o Diameter: 257mm • 1x monteq change system (A012708.0009B) • 1x D400 mobile container o Storage of the 4 listed clamping devices o monteq change system + Tiger crane hook mounted on the side • Descriptions/Instructions Fgedpfjv Ivakex Apteg • 1x Tool box with accessories Accessories • TOP65 clamping head (coarse for raw material) o 1 each: d12, 20, 30, 36, 40, 50, 55, 60, 65 • TOP65 clamping head (hexagon) o 1 each: SW36, 45, 46, 50 • TOP65G clamping head (smooth) o each 1 pc.  d8, 10, 12, 14, 15, 16, 17, 18, 20, 22, 23, 24, 25, 26, 27, 28, 30, 32, 33, 34, 35, 36, 39, 40, 42, 44, 45, 46, 50, 54, 56, 60, 62, 64, 65 o 2 pcs.  d38 • 1x boring ring for clamping head 65 • 50 clamping heads in total • Jaw accessories o for HWR 4-jaw chuck  1 set of reversible jaws  3 sets of claw jaws o for Forkardt 3-jaw chuck  1 set of hard Reversible jaws o Various T-nuts + screws o Various spacer bolts for jaws (adjust the clamping length to the material) • Various soft jaws (2 pallets)

Condition: used, Year of construction: 2000, x-travel 900 mm y-travel 800 mm z-travel 970 mm Control Fanuc type PRO-3 tool taper HSK 100 power capacity 30 kW turning speeds 12000 U/min rapid traverse 50 m/min Tool changer 90 Pos. Cooling through the spindle 70 bar size of pallet 630x630 mm Table load 1200 kg rotary table tiltable 1 Grad type of pallet-changer 2 weight of the machine ca. 20 t Special features: Tool magazine for 90 HSK-A100 short-taper tools 70 bar high-pressure coolant system Indexable rotary table swivels in 1° increments Pallet size 630 x 630 mm Maximum table load 1,200 kg Hydraulic power unit for fixture clamping system Fanuc Pro-3 control system Automation: Fedpfx Apjyqu H Eotsgg Dual pallet changer Tool breakage detection Automatic workpiece measurement with Marposs touch probe The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Fsdpfxoh U Rzne Aptsgg Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: good (used), Code: 0382 Brand: ALBERTI Model: BASIC PLUS CN - CE Standard CNC working centre for furniture and fittings – CE Standard Top vertical “point-to-point” drilling machine with continuous feed, with panel loading and longitudinal movement, with a monolithic structure made of electro-welded steel. Independent control of 3 axis with optimised drilling and insertion cycles Panel dimensions: Max 3000 x 1200 x 60 mm Min 300 x 110 x 15 mm (automatic loading/unloading) Min 300 x 110 x 8 mm (manual loading/unloading) Monoblock configuration with independent spindles: N° 16 independent vertical spindles with centre-to-centre distance 32 mm , along the Y-axis (Assembly) N° 3 horizontal drilling heads, with dual output in X direction pitch 32 mm and vertical presser, mounted on the side of the monoblock N° 10 independent vertical spindles with centre-to-centre 32 mm arranged along the X axis (Fitting) N° 1 horizontal drilling head with dual output in Y direction and vertical presser Workbench configuration: Loading roller section with straight PVC-coated rollers Useful length for panel support 2000 mm Useful width for panel support 840 mm Reference surface inside the machine body, consisting of ground PVC-coated idler rollers, with a usable width for panel support 1000 mm Work surface height 920 mm, adjustable +/- 30 mm Discharge roller section with straight PVC-coated rollers Useful length for panel support 2000 mm Useful width for panel support 840 mm Panel guide bar with automatic positioning movement Vertical clamps mounted on the panel guide bar, automatically adjusted to the workpiece thickness via pneumatic cylinders Vacuum pump 40 m³ Milling unit“Electric spindle” 9 Hp Tool holder HSK-63F for AUTOMATIC/MANUAL tool change system. Speed selectable via program (12.000/18.000 rpm) - Device capable of performing milling operations in X and Y directions, both linear and interpolated, within the machine’s technical limits. Rotation in both Right and Left directions. Tool Ø max 40 mm – N°1 HSK-63F right included Automatic tool changer Equipped with 4 positions for the automatic retrieval of tools with max diameter 40 mm. Includes a set of 4 shanks for taper ISO 30 . Compatible with milling unit – N° taper HSK-63 included Circular blade unit: Fgedpey R U Abjfx Aptjg Composed by independent motor 1,8 Hp, speed 12.000 rpm, capable of cutting grooves in X and Y directions within the machine’s technical limits. Tool mounting with flange, max bore Ø 120 mm, max thickness 8 mm Control panel and numerical control unit Mod. ALBNT (TPA): operating system Windows XP - ALBATROS TPA software Installed power 12 Kw Compressed air 6/7 bar Extraction: speed 30 m/s - Flow rate 8686 m³/h Overall dimensions: see attached sheet Weight kg 3500

Condition: used, 3-jaw wedge-bar lathe chuck FORKARDT TYPE F+160 No. 1659 181 Identical to Forkardt, SMW, or Röhm Diameter: 160 mm Internal diameter: 45 mm Chuck flange: short taper DIN 55022, size 6 1 set of chuck jaws consisting of base jaws and hardened step jaws for turning Fedpfxef Axprs Aptegg 1 set of chuck jaws consisting of base jaws and soft step jaws for turning - central adjustment Weight: 11 kg Good condition

Condition: used, Year of construction: 2022, plate thickness 4.0 mm throat 260 mm distance between roll centers 132 mm stroke 55.0 OW mm tool adaptor Ø 35 mm, 12 mm Nut mm total power requirement 3.0 kW weight of the machine ca. 450 kg. range L-W-H 1600 x 900 x 1200 mm Exhibition machine from 2022 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers Fodpfoxaazlex Aptsgg - hydraulic adjustment of the upper roller, with pressure gauge - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Condition: used, Year of construction: 2015, functionality: fully functional, sheet thickness (max.): 2 mm, overall weight: 2,600 kg, total length: 1,000 mm, input voltage: 480 V, We offer this used Prinzing BEA2-S riveting and flanging machine, year of manufacture 2015. Type: BEA2-S Material thickness: 1.5 mm Length: 1000 mm Serial number: 1007 Year of manufacture: 2015 Weight: 2600 kg Voltage: 480 V Frequency: 60 Hz Power: 19.5 kW Current: 40 A The machine is already disassembled. Fjdpfx Apjy Ev Smstegg If you have any questions or need further information, please don't hesitate to send us a message or call us.