Used Sliding Head Lathe for sale (20,828)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter: 1,800 mm, turning length: 600 mm, spindle bore: 130 mm, spindle speed (max.): 400 rpm, controller model: Siemens 840D Powerline, TECHNICAL DETAILS Turning diameter: 1,800 mm Turning length: 600 mm Spindle bore: 130 mm Spindle nose: DIN 55027, size 11 Speed range: 1–400 rpm MACHINE DETAILS Control system: Siemens 840D Powerline Total power requirement: 38 / 52 kW Dimensions & Weight Machine weight: approx. 25 t Transport width: 3,700 mm Tjdpfezv Rlgox Abtob EQUIPMENT 6-jaw chuck

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, controller model: Siemens 840 D, table diameter: 1,220 mm, TECHNICAL DETAILS Table diameter: 1,220 mm Max. turning diameter: 1,500 mm Max. height under the cross beam: 900/1,200 mm Saddle travel, X-axis: 1,000 mm Table speed range: 4.5 to 100 RPM Feed rate range: 0.127 to 6.35 mm/rev Tool changer: 30 positions Tedpfxszuy Eas Abtjb MACHINE DETAILS Control system: Siemens 840 D Main drive motor: 41 kW EQUIPMENT 8 clamping jaws 30 tool holders Full enclosure Mist extraction system

Condition: used, Max. turning diameter: 650 mm Min. turning diameter: 200 mm Max. turning length: 4000 mm Max. workpiece weight: 10 tons Center height: 400 mm Tsdpfovk T S Asx Abtob Faceplate diameter: 650 mm Speed: 1 - 58.4 rpm Drive power: 45 HP Tailstock

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czech Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Todpfx Abezww R Sjtob

Condition: used, Year of construction: 2014, functionality: fully functional, For sale: a professional vertical CNC machining center, HYUNDAI WIA F400, manufactured in 2014. The machine is in exceptionally good technical and visual condition, having been used for only approximately 460 operating hours. Machines in this condition are rarely found on the used equipment market. Throughout its operational life, the machine has been regularly maintained. Even when not in use, it was started up every week, the spindle was rotated, and all axes were moved, ensuring that all mechanisms remained in excellent condition. The machine is connected and ready for inspection and testing. Key Information: Manufacturer: HYUNDAI WIA Tjdpfxszxgvmo Abteb Model: F400 Year of Manufacture: 2014.05 Made in: South Korea Technical Specifications: Controller: FANUC Series 32i-Model A Maximum Spindle Speed: 12,000 rpm Automatic Tool Changer: 24 positions Power Supply: 380 V / 50 Hz Installed Power: 20 kVA Weight: 5,100 kg Operating Hours: approximately 460 h Equipment: FANUC Series 32i-Model A CNC control 24-position automatic tool changer 12,000 rpm spindle Chip conveyor Cooling system Fully enclosed work area CE certificate Application: Ideally suited for: Precision milling Machining of steel, stainless steel, and aluminum Single-piece and series production Tool manufacturing Mechanical engineering companies If you have any further questions, we will be happy to answer them.

Condition: new, Year of construction: 2026, NEW 2026 – REM SCR 50 CNC 2S | Dual-Head CNC Vertical Turning Center High-performance heavy-duty CNC Vertical Turning Center with two independent milling heads and two disc-type automatic tool changers. Designed for the most demanding precision turning and milling of large workpieces. TURNING ENVELOPE: • Faceplate Diameter: 4,500 mm • Machining Diameter: 4,700 mm (with CE enclosure) | 5,300 mm (open) Tedpfx Abjhh Dnxeteb • Machining Height: 2,100 mm / 3,500 mm • Max. Workpiece Weight: 30,000 kg / 50 tonnes AXIS TRAVELS: • X & U-Axis (Ram Carriage): -100 to 2,600 mm • Z & W-Axis (Ram): 1,250 mm / 1,700 mm WORK TABLE: • Faceplate: 4,500 mm with T-slots | Jaw chuck height: 200 mm • Speed: 0–50 rpm • Power (S1): 96 kW / 2×75 kW • Torque (S1): 130,000 Nm / 320,000 Nm • Drive: ZF gearbox reducer + belt transmission MILLING RAMS (Left & Right | 250×250 mm | KM 63): • 2× Independent heads — simultaneous or individual operation TOOLING: • 2× Disc-type ATC (12 stations each — turning + milling) • Maximum tool weight per station specified on request Manufactured by REM Bacau – Romania. New machine, available on order. Delivery worldwide. Contact us for full specs, videos, and pricing.

Condition: new, Year of construction: 2026, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SCR 44 2SF, NEW 2026 – REM SC 44 CNC 2SF | Heavy-Duty CNC Vertical Turning Center Top-of-the-range CNC Vertical Turning Center from REM Bacau, featuring dual milling heads, dual automatic tool changers and Siemens Sinumerik 840D SL control. Built for the most demanding heavy machining applications. TURNING ENVELOPE: • Faceplate Diameter: 4,000 mm • Machining Diameter: 4,400 mm Tsdpfxjg Uwmqj Abtob • Machining Height: 2,000 mm • Max. Workpiece Weight: 16,000 kg AXIS TRAVELS: • X-Axis (Ram Carriage): 2,500 mm • W-Axis (Elevating Cross Rail): 1,200 mm • Z-Axis (Ram Vertical Travel): 1,250 mm • Indexing Step: 300 mm WORK TABLE: • Diameter: 4,000 mm | Speed: 1–60 (90) rpm • Power (S1): 100 kW | Torque: 110,000 Nm • C-Axis: 0.02–1.5 rpm | C-Axis Torque: 55,000 Nm MILLING RAM (250×250 mm | KM 63 / ISO 50): • Ram Speed: 0–2,500 rpm | Power: 40 kW | Torque: 1,400 Nm TOOLING: • 2× ATC Magazine (12 turning + 12 milling tools each) • Control: Siemens Sinumerik 840D SL Manufactured by REM Bacau – Romania | 60+ years of expertise. Fully inspected and tested. Export worldwide. Contact us for pricing, videos, and full specs.

Condition: excellent (used), Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, turning height: 3,000 mm, workpiece weight (max.): 30,000 kg, turning diameter: 3,500 mm, power: 100 kW (135.96 HP), REM SC 35 CNC 1S | CNC Vertical Turret Lathe | Ø3,500mm | 30 Tonnes Robust single-head CNC Vertical Turning Center from REM Bacau — engineered for high-torque, large-diameter turning with outstanding precision and reliability. TECHNICAL SPECIFICATIONS: • Max. Machining Diameter: 3,500 mm Tjdpfxetpnlwe Abtjb • Min. Machining Diameter: 0 mm • Max. Part Height: 3,000 mm • Max. Table Load: 30 tonnes • Table Diameter: 3,000 mm • Table Speed Range: 2–130 rpm • Main AC Motor (Turning): 100 kW • Max. Faceplate Torque (Turning): 105,000 Nm • Ram Vertical Stroke (Z-axis): specified in full datasheet KEY ADVANTAGES: ✔ Single precision head — ideal for high-accuracy turning jobs ✔ Massive 30-tonne workpiece capacity ✔ 100 kW AC main drive for continuous heavy-duty performance ✔ Full CNC control — available with Siemens or Heidenhain ✔ Rigid, thermally compensated construction Applications: Wind energy components, large flanges, rings, turbine housings, pressure vessels. Manufactured by REM Bacau – Romania | 60+ years of VTL manufacturing. Available for inspection. Worldwide export. Contact us for full datasheet, video, and quotation.

Condition: new, Year of construction: 2025, REM Vertical Turning Lathe DIFFERENT TURNING DIAMETERS SCR 17 / SCR 22/SCR 27/SCR 33 /SCR 43 MANUAL Special manufactured by REM for : CENTER AND EAST EUROPE MIDDLE EAST LATIN AMERICA DEVELOPING SHOPS , HIGHLIGHTS - UNBEATABLE PRICE - VERY EFFECTIVE MACHINE - GOOD FOR WORSHOPS IN SMALL AND MIDDLE RANGE OF PRODUCTION - NO GEARBOXES - NO CNC CONTROLL - NO EXPANSIVE TEHNOLOGIST AND WORKER - EASY MAINTENANCE AND - EASY OPERATE - EASY LEARN Technical Details: Faceplate Diameter (mm) 1500- 2000-2500-3000-4.000 - 4700 Tedpfxsgdyyue Abteb Max. Turning Diameter (mm) + 300 Machining Height: 1500 - 2000 - 3000 mm Max. Work Piece Weight: 6-8-12-15-18-25-30 tons Control Conventional DIGITAL READ OUT for each axis

Condition: new, Year of construction: 2025, turning height: 2,800 mm, workpiece weight (max.): 30,000 kg, turning diameter: 3,300 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,500 mm, faceplate diameter: 3,000 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, rotary table diameter: 3,000 mm, rapid traverse X-axis: 6 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, rotational speed (max.): 92 rpm, rotational speed (min.): 1 rpm, table load: 30,000 kg, table diameter: 3,000 mm, REM Vertical Turning Lathe TURNING DIAMETER SCR 33 MANUAL with DRO Special manufactured by REM for : CENTER AND EAST EUROPE MIDDLE EAST LATIN AMERICA DEVELOPING SHOPS , HIGHLIGHTS - UNBEATABLE PRICE - VERY EFFECTIVE MACHINE - GOOD FOR WORSHOPS IN SMALL AND MIDDLE RANGE OF PRODUCTION - NO GEARBOXES Todpfxov Ilg Hs Abteb - NO CNC CONTROLL - NO EXPANSIVE TEHNOLOGIST AND WORKER - EASY MAINTENANCE AND - EASY OPERATE - EASY LEARN Technical Details: Faceplate Diameter (mm) 3000 Max. Turning Diameter (mm) + 300 Machining Height: 2800 mm Max. Work Piece Weight: 30 tons Conventional Control DIGITAL READ OUT for each axis

Condition: new, power: 338 kW (459.55 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: intarder, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: central locking, cruise control, fog lights, spoiler, = Additional options and accessories = - CD - Immobiliser - Spoilers - Sun visor - Tachograph = Remarks = Country of origin: SPAIN Displacement: 11,120cc Brakes: Electronic Braking System Emergency Brake Assist Construction: Tractor Head ADblue tank 135L LED daytime running lights Tjdsy Tymdopfx Abtob Mobile Phone preparation Bluetooth Fifth wheel Electr. And headed rear view mirrors Rear differential lock Electr. Stability Programm ESP Air Suspended front seats Electronic Stability Programm ESP Lane Departure Warning System Model: AS440S46T/P Exterior Color: White Cylinders: 6 Kilometer: 740,000 km less than Interior Color: Med. Grey Max Axle Load: 8,000 / 13,000 kg

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, axle configuration: 6x6, wheelbase: 3,800 mm, fuel: diesel, gearing type: mechanical, emission class: euro3, Year of construction: 2026, Equipment: air conditioning, cruise control, differential lock, fog lights, = Additional options and accessories = - Immobiliser - Spare wheel = Remarks = Cabin type: Active Time Country of origin: Spain Displacement: 12,900 Steering: LH Drive Construction: Tractor Head EBS + BAS Type: AT720T47WTH Fifth Wheel: Jost fifth wheel Rear Axle : HR-TP Colour: 50105- White IC 194 Headlamps Protection Roof Rotating LED lights Reverse Buzzer Pneum. Horn-Chassis Without PTO preparation Bunk Curtains External Sunvisor 2 lowered bunks w/o prot net Headed Electric rear mirrors Drive T. 14.00R20 Front Multileaf Susp Speed Limiter 80KM/H Rear Axle ratio 5.01 Senza ADM Safety Hor. Filter Cartridge Horizontal air filter 630cc air compressor Standard airtank plating Steel air tanks Tedpfxoy Tylgj Abteb 90A alternator Standard gear mode 08329 APU free discharge Horiz Batt side fram STD cab insulation Standard grey plastic part Without roof 02640 Mechanical Cab Suspension Manual Cab Tilt AT low roof cab Roof in standard color Standard reverse Temperate countries preparation S Disp oper ped post Fabric air susp driver seat Limitation on CC Lower exhaust pipe Eng RPM = 1900 REV/ 5th W EC POSI06139 front anti roll bar Rear anti roll bar Filter HP TR/NO heat Serb. Comb. 390L ZF 16S 2520 to GBOX Standard Headlights Plates in ECC languages Jack R. overhang 780mm Loads 8000-130000-13000 kgs Bulb rear lights Mechanical battery switch Fabric Sta. 2 way adj. pass Engine plate radiator guard Provision radio and CB Rear suspension no spacer Rear cross member Rear multileaf susp Steel wheels Twinned wheels Grey IC44 chassis Standard cab trim mph/kph speedometer soft touch foam steering wheel with stickers79240 Aux. chassis for 5th wheel Pre heater Generic towhook Trattam. Prot. STD 15 Pin trailer plug Towing version Ft/Rr Torque 1:1 Tyre inflation hose VIN code check digit warning Triangle Radice VIN WJM STD setting C11/C13 Steel front bumper = More information = Number of cylinders: 6 GVW: 33.000 kg

Condition: excellent (used), Year of construction: 2019, operating hours: 1,286 h, functionality: fully functional, Doosan PUMA GT3100L – Specifications Chuck Size: 12" Max. Turning Diameter: Ø481 mm Max. Turning Length: 1,275 mm Bar Capacity: Approx. Ø102 mm X-Axis Travel: 260 mm Z-Axis Travel: 1,350 mm Max. Spindle Speed: 2,800 rpm Spindle Motor Power: 35 kW Max. Spindle Torque: 1,613 Nm Turret: 10 stations Guideway: Box Guideway Rapid Traverse (X/Z): 24 / 30 m/min Dimensions (L × W × H): Approx. 4,633 × 2,394 × 2,110 mm Tsdpfx Abezw T Dbjtsb Machine Weight: Approx. 6,900 kg CNC Control: FANUC

Condition: used, Year of construction: 2020, Doosan Puma GT2600M Fanuc control Year 2020 Tsdpszw Dyaefx Abteb Powered tools, C-axis Z-axis 680mm X-axis 265mm Max. diameter 410mm Max. turning length 610mm Chuck 250mm Spindle bore 81mm 12-position BMT 55 turret Tailstock Tool probe Chip conveyor Documentation 11 tools, including 1 powered tool

Condition: good (used), Sicom B163-5 Double-Head Binder Riveter Manufacturer: Sicom, Italy Very good condition, ready for production. Double head riveting machine to fit two rivets simultaneously on ring-binders, sample books and similar products. Cardboard thickness: 0.5-4 mm Maximum board size: 1000 x 900 mm Weight: 170 kg Todozw N U Njpfx Abteb Pneumatic supply: 6-8 bar Automatic rivet feeding, material piercing, and mechanism crimping.

Condition: used, Year of construction: 2017, functionality: fully functional, CNC lathe Smec SL2500BM, year 2017, made in Korea. Fanuc OiTF control with Manual Guide. Tjdpfx Abjzwu Rcetsb C-axis driven tooling. Max turning length: 500mm. Max turning diameter: 405mm. Spindle bore: 76mm. SMW autoblock chuck, 315mm, with 91mm bore, installed. Max spindle speed: 3500 rpm. Z-axis travel: 540mm. X-axis travel: 245mm. 24-position BMT 65 turret. -Tailstock -Tool probe -Part catcher -Chip conveyor -Coolant tank with pump -Documentation -Tool holders: 12 pieces, including 3 driven tools (2/1)

Condition: excellent (used), CATALOGUE NUMBER 8062 Technical specifications: - max. main blade diameter 500mm - main blade adjustable up/down and at an angle, electrically - spindle diameter 30mm - spindle locking - with a crosscut fence - with a side fence + protractor - crosscut fence length 3000mm - cutting width adjustable with an electric guide from the upper control panel, 1550mm - with a side fence and an angle-adjustable guide - with a scoring saw - max. scoring saw diameter 120mm - scoring saw motor 0.75kW - main motor 6kW - blade adjustment up/down adjustable from the upper control panel - angle adjustment adjustable from the upper control panel - 2 types of rotation speeds - pressure beam - START/STOP switch in the crosscut table - protractor - table extension 2000x1530mm - large blade guard Tsdszxq Ugopfx Abtob - dust extraction nozzle diameter 100mm, 120mm - dimensions L/W/H 3600x3800x1600mm - weight approximately 1200kg Advantages: – Polish production – with a scoring saw – START/STOP switch in the crosscut table – pressure beam – original DTR documentation – unpainted – used saw, very good condition Net price: 29900 PLN Net price: 7120 EUR depending on the exchange rate of 4.20 EUR (Prices may change due to larger fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6679 TECHNICAL DATA - max. width of workpiece: 250mm - max. height of workpiece: 170mm 6 spindles: 1) horizontal lower: 250mm, 5.5kW 2) vertical right: 170mm, 5.5kW 3) vertical left: 170mm, 5.5kW 4) horizontal upper: 250mm, 7.5kW 5) horizontal lower: 250mm, 7.5kW 6) universal: 250mm, adjustable at 360°, 5.5kW - 6 spindles, electrically adjustable up/down - all spindles adjustable up/down, left/right - spindle diameter: 40mm - 6 top feeding rollers, toothed, pulling, including 2 double rollers - 6 top delivery rollers, pulling, smooth rubber, including 2 double rollers - 2 top pressure rollers - 1 bottom feeding roller, toothed, pulling, swiveling on the table in front of the first spindle - 2 bottom delivery rollers, pulling, smooth metal - 4 bottom side pressure rollers - feed via Cardan shafts - rollers pneumatically pressed - stepless feed speed adjustment on a frequency converter, 6-30m/min - feed motor: 4kW - working pressure: 8-10bar - electric adjustment of planing thickness - body lifting motor: 1.1kW - central lubrication of the table Tjdpfszxqvwsx Abteb - length of the infeed table: 2180mm - diameter of extraction nozzles: 6x150mm - dimensions (L/W/H): 5000x1800x1900mm - weight: approx. 4600kg ADVANTAGES - Made in Italy - 6 heads - DTR + CE documentation - Ideal for both wet and dry wood - Universal spindle - Excellent condition / like new Net price: 114900 PLN Net price: 27350 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (prices may change in case of significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1998, functionality: fully functional, Control: Okuma OSP700L (similar to FANUC) Todpfezw Ug Djx Abteb Swing over bed: 450 mm Swing over cross slide: 350 mm Max. turning diameter: 270 mm Max. turning length: 500 mm Chuck size: 8 inches / D206 mm X-axis travel: 155 mm Z-axis travel: 320 mm Main spindle speed: 75 – 3500 rpm (stepless / continuously variable) Main drive power: 7.5 kW Tool turret: 12-station (12-position) Transport dimensions (Length x Depth x Height): - Machine: 2500 x 1800 x 2100 mm, Weight: 3800 kg - Bar feeder: 3000 x 1500 x 1300 mm, Weight: 500 kg - Chip conveyor: 2400 x 1500 x 800 mm, Weight: 400 kg - Hydraulic unit for bar feeder: 1000 x 600 x 700 mm, Weight: 200 kg Accessories: - 3-jaw hydraulic chuck - Various tool holders - Bar feeder - Chip conveyor - Tailstock - Transformer

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Control unit: FANUC i Series-TD Swing diameter over bed: 780 mm Max. turning diameter: 406 mm Max. turning length: 830 mm Max. bar capacity: 65 mm Chuck size: 8 inches (approx. 210 mm) Max. spindle speed: 4500 RPM Spindle motor power: 25 kW / 18.5 kW Max. torque: 247 Nm C-axis resolution: 0.001 degrees Tool stations: 12-fach Tool holder type: BMT 55P Speed of driven tools: 5000 rpm Power of driven tools: 5,5 kW X-axis travel: 260 mm Z-axis travel: 830 mm Rapid traverse rate (X / Z): 30 / 30 m/min Machine weight: approx. 5500 kg Dimensions (L x W x H): approx. 3530 x 1863 x 1900 mm Accessories, Equipment: - Chip conveyor Tjdozw N T Sjpfx Abtjb - Coolant system - C-axis - Driven tool turret - Tailstock - Tool setter (Tool measuring arm) - Transformer - Signal lamp - Machine feet - Documentation Description:The machine was purchased as new in Hungary. It was used in a sheet metal processing company and has been barely used. It is currently under power and can be inspected in our showroom.

Condition: used, functionality: fully functional, Raiamnn GFBS043A/1199 belt conveyor Tjdpfx Aozwv Enjbtsb Length: 5500 mm Width: 2520 mm Height: 500 mm

Condition: excellent (used), For sale: ZMM C8C lathe as shown in the photos, marketed under the Huvema brand for the Dutch market. The machine comes from a school workshop where it has been in operation since its production. The condition of the machine is very good. On-site loading of the machine is provided. Turning trials were performed using a VCGT insert with a radius of 0.2. 160 mm Bison chuck with split jaws Turning length: 750 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Tailstock taper: MK3 Tjdpoy Rq Utsfx Abtob Spindle speeds: 85–2000 RPM 12 spindle speed steps

Condition: good (used), For sale is the lathe shown in the pictures, manufactured by the Japanese brand Mazak, model Quick Turn 8n, with Mazatrol T32-2 control. The machine is equipped with a bar feeder and a collet chuck. We can arrange for machine loading at the location. Net price: 23,000 (plus 23% VAT) Tedpfx Ajzc Ri Tjbteb Turning diameter: 160 mm Maximum turning length: 285 mm Spindle bore: 40 mm Maximum spindle speed: 6000 rpm 8-position turret Tailstock included Tool measuring probe Weight: 2700 kg

Condition: good (used), For sale is the lathe shown in the pictures, manufactured by the Chinese company Sumore, model SP2114. I rate the condition of the machine as very good. It has high rigidity and accuracy. The machine is connected and ready for operation. We provide on-site machine loading. Tedpfxozqt Dzo Abtob Spindle bore: 58 mm Lathe chuck: 250 mm Turning length: 1500 mm Turning diameter over the bed: 460 mm Turning diameter over the carriage: 260 mm Tailstock spindle: MK 4 Minimum speed: 25 rpm Maximum speed: 2000 rpm 12 spindle speeds Steady rest: fixed and traveling

Condition: used, Year of construction: 1999, functionality: fully functional, Eima Type 120 double-blade cutting saw Minimum/maximum cutting width: 210-2500 mm Tsdpfszwktaox Abteb Cutting depth: 2500 mm Maximum blade diameter: 400 mm Cutting height: ~100 mm Total power: 7 kW Electronic width-of-cut adjustment