Used Slitting Cut To Length for sale (45,984)

Year of construction: 2000, condition: reconditioned (used), Stock - No.: 2107 1 used, partly overhauled and functionally tested strand-pelletizer COMAC Type SG-100 SV infeed width 100 mm Cutting Rotor width 110 mm, parallel cut with 32 teeth Rotor- Ø 200 mm >> strand-pellet cutting length adjustment 2 drives: 1x for cutting-Rotor - 4 kW 1x for infeed-roller 1,5 kW with STÖBER reduction-speed gear Ijdpfx Ajiyyc Een Dsia Noise protected housing of pelletizing Chamber Inspection visit / trial-run shortly by appointment possible. We can also offer suitable strand-cooling bath, strandb-blower or pellet classifier ex stock. More strand-eplletizer and other pelletizing systems/units ex our stock availabe ( waterring - , hot-face- and underwater pelletizing )

Condition: ready for operation (used), functionality: fully functional, FM 10-3100 A, horizontal veneer and panel saw, ideal for precise longitudinal cuts on veneer packs, chipboard, MDF, and thin solid wood. Features automatic feed and return of the saw carriage, continuously adjustable feed advance, saw blade height, and cutting length. Equipped with a pneumatic special pressure beam, front and rear support tables HP 520, longitudinal and cross cuts in a single operation, 3-phase brake motor 6.8 HP / 5 kW and scoring unit, efficient dust extraction, maximum cutting height 60 mm, cutting length 3100 mm. The machine is in good condition and ready for immediate use, located at Neustadt/Weinstr. Iedpoyzxkwofx An Doia Transport available at extra cost!

Condition: excellent (used), Year of construction: 2022, operating hours: 3,000 h, functionality: fully functional, total length: 45,000 mm, AMIX Line for Thin Log Processing – Pallet Cut Stock Production (IN OPERATION) For sale: Fully functional and well-maintained AMIX saw line (Poland), designed for efficient thin log processing and the production of pallet cut stock / pallet components. --- 📏 Input material: - Diameter: 8 – 45 cm - Length: 2 – 4.5 m --- ⚙️ The line includes: - Automatic loading deck (6 m × 3 m) - Log turner (for log straightening) - Twin edger saw 2 × 30 kW with chipper system - Automatic side board, slab, and waste separation - Conveyor system for side boards and waney lumber - Automatic prism separator - Centering conveyor for prisms - Multirip saw 75 kW - Automatic take-off conveyor after multirip saw - Belt conveyor (width 2.5 m, length 4 m) - Cross-cut saw (4-blade) - Edger saw (2-shaft) - Material separation after edger saw - Complete conveyor system for chip and waste extraction 👉 Wood chipper is not included in the offer --- Ijdsyvlrkspfx An Djia ✅ Key advantages: - Very compact and efficient solution - Optimized for thin log processing - Ideal for pallet cut stock production - Automated material flow - Low manning requirements (3–4 operators) --- 🚀 Output: - approx. 40 – 60 m³ per 8-hour shift (depends on log diameter and material quality) --- 🔧 Condition: - Line currently in operation - Possibility to see the actual production and performance - Regularly maintained --- 💰 Price: €130,000 (price negotiable for serious enquires) 📍 Location: Slovakia For further information, photos, videos or to arrange an inspection, please do not hesitate to contact us.

Condition: used, Fully automatic RATTUNDE line ACS100/2 integrating: · cutting, · brush deburring, · facing / chamfering, · 100% length control, · automatic robotic packing with double output system · and very large set of tooling. Designed for high-precision single or double cuts. One of the fastest tube cutting machine on the market. TECHNICAL DATA Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25* - 2.000 mm (*25 - 150 mm with special tooling) Iijdpfx Aeyz Rvxon Dsa Performance: Up to 1.500 pieces/hour SCOPE OF SUPPLY 1. BM 8 bundle loading magazine in light construction 2. ACS 100/2 Cutting production system with piece counter 3. Brush deburring machine BDM 4. Chamfering machine CFM 5. Length measuring device Pi 6. Automatic stacking robot SRT 7. Safety fence with light barrier to secure the BM bundle loading magazine 8. Step conveyor SCB for the transport of pieces 9. Conveyor for test tubes 10. Complete set of tooling 11. Switch cabinet & control system for the complete line Performance: Up to 1.500 pieces/hour Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25 - 2.000 mm (25 - 150 mm with special tooling) Thickness: From 0,5 mm to solid

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, F45 Pro Drive - Year of manufacture: 2017 - Top control panel - 3200 mm - Saw blade diameter: 500 mm - 5.5 kW - Scorer preparation - Digital display on parallel fence - Cutting width 1100 mm to the right of the blade - Paper template holder - Angle display on cross slide Iisdpfx Ansypmqao Dja - Duplex mitre fence Price ex-location Transport available at extra cost!

Year of construction: 2020, condition: like new (used), FOR GERMAN MARKET ONLY. NOT FOR SALE OUTSIDE GERMAN SPEAKING TERRITORY DUE TO SALES AREA PROTECTION. Iisdpfx Aoffdgpon Dsa

Condition: excellent (used), Year of construction: 2015, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 1.5x3m, conveyor belt thickness: 3 mm, coil weight: 20,000 kg, conveyor belt width: 1,500 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, blade shaft diameter: 620 mm, load capacity: 20,000 kg, space requirement height: 3,000 mm, The line is in continuous use on the first shift. Manufacturer: China, plus 2 used straighteners for thick sheets additionally purchased. The line can be tested at any time. Operator training is possible. Ijdpfjxf Ucbjx An Doia

Condition: used, Year of construction: 1995, Technical details: sheet width: 1500 mm plate thickness: 1 mm control: Ducter 1500 total power requirement: 2,0 kW CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Shears: Iedpfxeu Tp N Do An Deia - cutting length 1500 mm - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation / automatic - table size 1530 x 400 mm - Rear end stop: adjustment range 1300 mm - Size: LxWxH: 1600 x 2.0 x 1350 mm Straightening system: - stand width 1585mm - Table size 1700 x 700mm with side stop 1x fixed and 1x adjustable (manual) - 2 pcs. infeed rollers, revolving, Ø 50 x 1670mm - Straightening rolls: 2x opposite draw rolls (2x top/2x bottom) both driven, adjustment path 10mm vertical - continuous rollers: 3x top running, manual adjustment 8mm vertical and 4x bottom driven, fixed - Size: LxWxH: 1580 x 2050 x 1260mm Unwinding reel: - manual operation/handling - Spread max. Ø 520mm - Size: LxWxH: 550 x 800 x 1550mm The machine has a manual counter. accessories: - 1 pc. spare blade (must be regrinded) *

Condition: new, Year of construction: 2025, For customers from: Lithuania, Latvia, Estonia. Equipment for straightening, longitudinal cutting, and shearing rolled metal is an integral attribute of companies working with sheet metal. The FORSTNER company, which has long-term experience in the production of rolled metal processing machines, currently offers the market not only conventional metal shearing machines, but also equipment that performs straightening, longitudinal cutting, and shearing functions. The shearing function is performed using disk or guillotine shears. Depending on your production goals and the tasks the equipment must perform, they can be divided into four groups: 1. shearing machines; 2. longitudinal cutting and shearing machines; 3. straightening and shearing machines; 4. straightening, longitudinal cutting, and shearing machines. The straightening and longitudinal cutting functions of certain models of longitudinal cutting machines can be automated, which allows you to quickly and conveniently change the parameters when starting to work with another material. Forstner EASY series equipment is a machine that cuts a sheet of metal of a set length with the help of a guillotine or circular shears. EASY CUT machines are equipped with circular shears that can cut steel up to 1.0 mm thick. If you need a machine that can cut thicker metal, then it is recommended to choose the EASY PRO model with a guillotine. The working width of the machines can be 1250 mm or 1500 mm. Forstner STRAIGHT. These machines, by pulling a set length of a sheet of metal, straighten it and cut it. Depending on the type of cross-cutting knife and the diameter of the straightening rollers, the thickness of the processed metal varies from 1 mm to 2 mm. STRAIGHT and POWERSTRAIGHT also differ in the adjustment of the straightening rollers: mechanical or automatic. Integrated automatic control saves time in the long term, because changing the operating parameters of the machine is enough to press one button. Automatic control is a great choice when working with many different materials. The Forstner SLIT series is a reliable assistant when cutting rolled metal. The SLIT CUT and SLIT PRO models not only cut the metal, but also cut it lengthwise into strips of the selected width. As standard, these models are equipped with 5 longitudinal cutting knives (the maximum number of knives is 7). The main difference between the SLIT CUT and SLIT PRO models is the type of cutting knife - a circular shear or a guillotine. Iodewd E N Ejpfx An Dsia The Forstner COMPACT series is a device that pulls the required length of material, flattens it, cuts it into strips of the desired width and cuts sheets of a set length. The main difference between the models is the type of knife used for cutting: a circular shear or a guillotine. The flattening rollers and longitudinal cutting knives are mechanically adjusted. POWER COMPACT is a powerful equipment for flattening, longitudinal cutting and shearing rolled metal. These two models differ in working width and cross-cutting metal thickness. NuSLIT machine models are fully automated equipment. If you are looking for an automatically controlled machine that performs longitudinal cutting and cutting functions, you should choose the nuSLIT PRO or nuSLIT PROCUT models. The difference between these two models is the type of cutting knife: guillotine or segmented disc shears. NuSLIT STRAIGHT PRO and nuSLIT STRAIGHT PROCUT, in addition to the above functions, also smooth the metal sheet.

Condition: used, The machine is designed to straightening and cut metal from a roll. Fully functional, straightening machine engine replaced a few years ago, Lenze. New software Lenze has been installed. The machine is programmable. Adjustable width, cutting length, sliding table. There is a remote control. There is an additional blade for the guillotine. Working width: 1500 mm Thickness: up to 2 mm Iijdpfxjm E U Hij An Dea If you have more questions, we will be happy to answer them.

Condition: used, Belt line cutting device, cut-to-length line, cut-to-length shears, lever cutting machine, lever cutter Iedpoqh Efijfx An Dsia -Cut-to-length system: with additional lever cutter, made from slats/blinds production -Cutting width: max. 210 mm -Cutting thickness: max. 0.5 mm -Lever cutter: IDEAL 2035 -Transport dimensions: 1025/500/H1240 mm -Total weight: 122 kg

Year of construction: 2023, condition: new, Cut to length machines FORSTNER COMPACT functions: - straightening (rolls diameters 70 mm) Iodpfeiy N I Iox An Deia - slitting (max 7 slitting knives) - cutting (guillotine or roller shear) Available coil width - 1250 or 1500 mm

Condition: used, RSA center for high-performance cutting, deburring, cleaning, drying and stacking for steel and stainless steel tubes. Scope of Supply: - 1 RSA high-speed precision saw model RASACUT NC 1500 - 1 Transfer system between the RASACUT precision saw and the RSA tube feeding system 1500 - 1 RSA tube feeding system 1500 - 1 RSA cleaning system RASACLEAN ET 1500 Including: - 1 RSA drying system TURBODRY - 1 RSA RASAPORT 1500 PR system High production High precision Very short setup times Iodpfsymapqsx An Djia Easy handling Easy machine connection RSA High performance Saw RASACUT TWIN NC 1500: Fast and Precise Round diameter: from 10 to 40 mm Square size: from 10x10 to 40x40 mm Wall thickness: from 1 to 3 mm Material: steel and stainless steel Original lengths: 6,200 mm Fixed length cutting and deburring: from 200 to 1,500 mm Round diameter: from 10 to 40 mm Square size: from 10x10 to 40x40 mm Wall thickness: from 1 to 3 mm Material: steel and stainless steel Original lengths: 6,200 mm Fixed length cutting and deburring: from 200 to 1,500 mm

Year of construction: 2023, condition: as good as new (ex-display), PY-1200 is an ideal and professional machine in die-cutting，creasing，embossing and full-stripping various PE coated paper, normal paper, corrugating paper and plastic material. It applies to paper cup,paper box,medical package,wine package,food package and other environmental protection products. Cut Precision ~ 0.10mm Production Capacity 150-210 times/min Max cutting size 120x64 cm Iodpfxoxnkdgo An Doia Maximum pressure 350 tons Total power 14.5 kw Total weight 8400 kg overall dimensions 4.2x2.3x1.85 m

Year of construction: 2007, condition: used, functionality: unexamined, Elumatec MGS 105/01 single head mitre saw with cut to length system, E111 digital display, E555 control, infeed and outfeed roller conveyors, s/n 1050126588 (advised 2007) This lot is located in Farnworth, Bolton. Iiedpfx Ansyg Rfce Doa Collection must be made on Tuesday 3rd March 2026.

Condition: new, Year of construction: 2022, New machine Year of manufacture 2022 Motor 400 V / 5.0 kW speed 2800 rpm cutting length 420 mm Cutting width 420 mm at 90 295 mm at 45° Cutting height 200 mm at 90° 140 mm at 45 Saw can be tilted on one side up to approx. 25° to acute angles and tilted flat to the left up to 30°. Saw blade-Ø 520 mm x 50 mm Iijdpfekwhmfjx An Doa suction nozzle-Ø 100 mm Weight 250kg With the following equipment options: - HM circular saw blade 520x4,0/2,8 x 50 60 WZ for wood - Machine can be tilted on both sides from the front via hand crank Availability: short term/2022 Location: Solingen

Condition: new, Year of construction: 2026, functionality: fully functional, coil weight: 10,000 kg, number of straightening rollers: 6, conveyor belt width: 1,500 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, blade shaft diameter: 255 mm, sheet thickness copper (max.): 3 mm, inner diameter: 510 mm, outer diameter: 1,500 mm, mandrel diameter: 510 mm, mandrel length: 1,500 mm, coil width: 1,500 mm, coil outer diameter: 1,500 mm, number of blades: 8, warranty duration: 12 months, straightening roller diameter: 140 mm, total width: 1,500 mm, Slitting line model 1,500 x 3 mm, comprising: - Decoiler Aspo mod. 1500/5Ton (customizable) - Loading table - Feeder and straightener with 6 rollers, diameter 140 mm - Rotary cutter with 4 pairs of circular blades - Automatic punching unit with 20 customized punching stations - Mechanical shear Iedpfxsx Hr S Ss An Doia - Aspo recoiler

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Iiodpfsihf Tpex An Dea Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Iijdpfsixqg Nsx An Dja Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Year of construction: 2019, condition: excellent (used), Web width: 500 mm Speed: max 150 m/min Main unwinding - Unwinding with bearings on both sides - Pneumatic roller lift - Servo drive Vacuum cutting table BST web edge control Vacuum station (2x) - Servo drive - Adjustable web width Die cutting station - Servo drive - Pneumatically operated PowerBridge - Easy tool change thanks to Moving bridge - Register mark control Rewinder/unwinder - Separate servo drive for winder and auxiliary shaft - Direction of rotation on both sides - Pneumatic clamping - Automatic diameter calculation Tube Scan - web monitoring Web buffer unit ( static) Tandem rewinder - Separate servo drive in each case - Friction shafts - Cutting table for web fixing - Separate display Iisdpou Iucusfx An Dea S-CONtrol - Convenient and intuitive to operate - User and recipe management - Display on rail system

Condition: excellent (used), Year of construction: 1976, strip width: 400 - 2.100 mm Iedpfoqw Aacox An Doia strip thickness: 0,5 - 3 mm coil weight: 40 t coil ID: 508/610 mm

Condition: excellent (used), Year of construction: 1980, strip width: 1.500 mm strip thickness: 3 mm Iodpfx Aoqw Akmjn Deia coil weight: 10 t

Condition: new, Year of construction: 2024, machine/vehicle number: 2024/121/47, functionality: fully functional, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Type ZS 170 N (tiltable) Ijdpfx Anetwz Tls Deia 400 Volt three-phase brake motor 2.2 kW Saw blade diameter 420 mm Saw blade holder 40 mm Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm incl. the following accessories: 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood 1 pc. Machine stand

Condition: new, Year of construction: 2024, The machine has an electrical connection of 15 kW and a trunk diameter of up to 85 cm. The saw motor is electrically driven and has an 11 kW motor. Iodpfx Aneu Sklmj Djia

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, coil weight: 10,000 kg, sheet thickness aluminum (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness copper (max.): 2 mm, inner diameter: 508 mm, sheet thickness (max.): 2 mm, outer diameter: 1,600 mm, coil width: 1,524 mm, number of blades: 3, type of input current: three-phase, warranty duration: 12 months, straightening roller diameter: 100 mm, CTL Demaq Format. New, only exposed in fair. Coil up to 10 Tons D1600, 20" Nominal. Coil Cart hydraulic. 4 rolls of feeder and 7 straight rolls. Hardened and chromed. Servo Nidec in straightener and decoiler. 3 longitudinal knifes, axis (HC) 134 mm, knifes 220 mm. Ijdpfxstywpbs An Djia Transversal shear. Full made in Spain in our facilities. Optional other devices and configurations. The most popular Demaq SPL machine. 2 unites available.