Used Slot Mortiser for sale (3,109)

Condition: ready for operation (used), Technical characteristics Max. mortise depth : 150 mm Max. mortise length : 340 mm Longitudinal stroke : 300 mm Cross-travel : 80 mm Max. height of upright on worktable : 300 mm Working table dimensions : 400 x 135 mm Dcsdst Dga Nspfx Adder Table inclination : -45° to +45°. Mechanical front press Pneumatic door locking Aluminium extension with mechanical stops Guiding rod for horizontal door positioning Compressed-air gun for machine cleaning Door support Automatic chain lubrication pump Manual vertical travel Power and Motors Voltage: 400 V Pluging: Three-phased Power: 2,2 Kw Motor: 3 CV Overall dimensions Lenght: 1916 mm Width: 1400 mm Height: 1026 mm Weight: 420 Kg

Condition: used, Year of construction: 2006, Machine including brand new 2-jaw chuck Machine cleaned, lubricated, partially overhauled, test run performed Drill chuck replaced. Chuck runout: 0.03 mm Used, top condition, low operating hours Make: Hofmann Model: LB 760 Year of manufacture: 2006 Machine no.: 76-01420 CE type-examined Dcsdpfx Aew Ed Uioddjr Motor: 1.8 kW, 2 speeds Table size: 760 mm Drill capacity: 0–20 mm Drill chuck: 20 mm Dowel boring device with 4 position stops Workpiece stop Mitre stop 45° Centre stop Motor speed: 2 settings (1500/3000 rpm) Digital height display Manual workpiece clamp, 1 x with 2 columns Extraction connection: Ø 120 mm Space requirement: approx. 1300 x 1200 x 1400 mm Weight: approx. 260 kg Location: 97447 Gerolzhofen, free loaded, unpackaged Delivery in as-inspected condition, without guarantee or warranty.

Condition: new, Year of construction: 2024, machine/vehicle number: 2209, height adjustment type: mechanical, --- the 'new' own brand of: HoKuTech GmbH & Co. KG --- Slot Mortising Machine VD 20 R Motor 1.5/1.9 kW, Lateral travel in Y-axis 250 mm, Dcedpfxjrxcylj Addsr Longitudinal travel in X 340 mm, Vertical travel in Z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel boring device with divisions 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, manual digital display for drill height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, Table rotatable +/- 45°, Weight approx. 345 kg available immediately from stock Seevetal, subject to prior sale,

Condition: used, functionality: fully functional, 1420mm (56") Goulding sheet die. Choker bar. Adjustable lip. Remove bottom lip. 20mm infeed port * Adjustable top lip. 7-15mm approximately * Removable bottom lip Dcsdpjwnthwefx Addor * Vertical choker bar * 20mm infeed port * Decals

Condition: ready for operation (used), Year of construction: 1960, machine/vehicle number: 719, Manufacturer: Hurth Model : LF 00 Machine No. : 719 Year of manufacture : ca.1960 Weight: ca. 400 KG General / technical data: used horizontal grooving milling machine with crank gear controlled groove length adjustment and automatic depth adjustment groove width for cutter Ø: from 2 to 10mm length of grooves in one cut: from 0 to 60mm + cutter diameter 10 depth feeds feeds: 0,03 to 0,3 mm milling feed: 8 speeds of the milling carriage by crank stroke: 5,1 / 7,3 / 10,2 / 13,9 / 18,4 / 25,4 / 34,7 / 49,5 strokes/min spindle speeds: 4 pieces 970, 1370, 1950, and 2750 rpm Dsdpfxjg Uq Dfs Addscr table dimensions (rigid table): 160mm x 355mm table height adjustment: 40mm transversal movement of the table ( against the cutter ): 110mm power supply / spindle motor power: 380Volt 50 HZ / 0,8 KW / 920 1/min approx. space requirement of the machine: 670mm x 1100mm x 1200mm (bxtxh) Accessories / special equipment: Chip tray coolant device Machine documentation Remarks: The machine is in a condition corresponding to its age. The machine is preferably designed for production use in small and medium series. The machine has a simple crank gear adjustment to determine the length of the groove.

Condition: excellent (used), Aventics CKP-DA-032-0200-CL-MM00S00BLP000P0P0 Carriage Cylinder, slotted cylinder Item condition: Used, in perfect condition Dcsdpelkbmfjfx Addjr More slide cylinders - new and used - you will find in our store! International shipping costs on request!

Condition: ready for operation (used), Technical characteristics Mortise depth : 150 mm max Bar lubrication pump Frontal stroke 80 mm Longitudinal stroke 200 mm Swivel table Door support Manual lowering Dedpfst Dgbaex Addocr Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions

Condition: used, Year of construction: 1995, with pneumatic lift for drilling on 2 levels used, excellent condition, low hours Manufacturer: Hoffmann Model: HR 150 Year of manufacture: 1995 Machine no.: 15201 CE type tested Drill chuck: 16 mm Dodpfxow Ed Ucj Addscr Dowel drilling device with 1 piece indexing guide Workpiece stop Mitre gauge 45° Center stop Mobile Pneumatic lift Digital displays Pneumatic workpiece clamps, 2 pcs Space requirements approx. 1200 mm x 900 mm x 1300 mm Weight approx. 350 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery as is, as inspected, without guarantee or warranty

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DC-2075, Work table 700 x 300 mm, drilling width 240 mm, drilling depth 150 mm, max. travel 230 mm, drill head height adjustment 160 mm, drill head swivel 45°-0°-45°, Wescott drill chuck 0 - 20 mm, Dodpfx Ajvl Eynjddecr speed 3,000 rpm, motor 2.2 kW, 400 volts, 50 Hz., weight approx. 345 kg, from the Seevetal location, without transport, as seen, subject to prior sale.

Condition: good (used), Year of construction: 1994, Slot boring machine JAGO B4 PN TR Year of manufacture 1994 Locking device for dowel and row drilling Pitch 16,22,25,32 mm Compressed air eccentric clamp Line laser Dcjdpfx Asubymieddsr Table top height 860 mm Table top size 580 x 300 mm Table top rotatable Drill chuck clamping range 1 - 20 mm Drill length 200 mm Max. drilling depth 150 mm Height adjustment range 200 mm Pneumatic lifting of the drill motor for 2 levels via manual valve Longitudinal and lateral stops Adjustable miter fence Motor power 2.2 kW Voltage 400/50 V/Hz Speed 1500/3000 rpm Space requirement 1295x1180 mm Net weight approx. 230 kg

Condition: used, Machinehandel De Leeuw BV Oordeelsestraat 7 b , NL-5111 PA Baarle-Nassau / Nederland Tel: Internet : E-mail : info@ T-slot plate / surface plate Dimensions : 3600 x 1800 mm T-slot : 2 x 22 mm Thickness plate : 370 mm Number of feet : 4 Total height incl. feet : 840 mm Send price request to e-mail address : info@ Dodjgbd Awspfx Addecr

Condition: ready for operation (used), Technical characteristics Oscillating bit mortiser Horizontal bit movement during machining Height-adjustable, tilting table Manual table height adjustment (fine adjustment) Pneumatic presser and pneumatic table feed Limit switch Ideal for cabinet makers Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions Dedjt Dgc Repfx Addscr

Condition: new, with quick stroke system- NEW -drilling width 240 mmdrilling depth 180 mmdrilling stroke 160 mm2-step motor 1400/2800 rpm instead of 2,2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricweight 246 kgitem no. 300015including accessories:1 piece 2-step motor 1400/2800 rpminstead of 2,2 kW no. A2500701 piece plug-in fence 90° no. A3501281 piece lling grid system with4 rows of holes 16,20,22,25 mmBowden cable operation No. A3002551 piece 4-wheeled trolley with 2 swivel castorsand 2 brakes on own frameNo. A3504151 piece eccentric pusher with column andclamping cross No. A250055 Dcjdpovwf H Ejfx Adder

Condition: ready for operation (used), Technical characteristics Square mortises, without lubrication Horizontal front stroke 90 mm Pneumatic feed Tilting head Pneumatic presser Dedpfx Adet Dgb Hjdocr Aluminium table 1200 mm Ideal machine for furniture and carpentry Power and Motors Overall dimensions

Condition: new, Transportable and flexible table machine, mills a keyway for theSwallow sizes W-0/-1/-2/-3/ction:Adjust the stops to measure and insert the workpiece. When the handle is depressed, the workpiececurious, excited. At the same time, the milling group moves to the set milling depth. The milled part will be at start-upof the handle is released again, the motor switches off automatically. Finished!Technical specifications:Electrical connection values 1ph/N/PE 230 V 50/60Hz 1.0 kWMotor 1 x 1000WIdle speed 34000 ual controlWorkpiece clamping manuallyPassage height 130 mmMilling depth 0-85 mmSuction connection Ø 50 mmSwallow size W-0/1/2/3/4Dimensions W/D/H 740/650/835Weight 32kgOrder No. W1031000 Dedpfx Aevwf Dkjddecr

Condition: ready for operation (used), Technical characteristics Mortise depth : 150 mm max Bar lubrication pump Frontal stroke 80 mm Longitudinal stroke 200 mm Dodouaiidspfx Addjcr Swivel table Door support Manual lowering Power and Motors Overall dimensions

Condition: new, with quick stroke system- NEW -drilling width 240 mmdrilling depth 180 mmdrilling stroke 160 mm2-step motor 1400/2800 rpm instead of 2,2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricweight 246 kgitem no. 300015including accessories:1 piece 2-step motor 1400/2800 rpminstead of 2,2 kW no. A2500701 piece plug-in fence 90° no. A3501281 piece lling grid system with4 rows of holes 16,20,22,25 mmBowden cable operation no. A3002551 piece eccentric pusher with column andclamping cross no. A250055 Dcodsvwfr Ispfx Adder

Condition: ready for operation (used), Technical characteristics Square mortises, chipped, without lubrication Horizontal front stroke 90 mm Pneumatic feed Tilting head Pneumatic press Aluminium table 1200 mm Dcsdpfsuaiikjx Addsr Ideal machine for furniture and carpentry MortaisageChisel Power and Motors Overall dimensions

Condition: new, withquick stroke system, rotatable drill head,operating instructionsdrilling width 240 mmdrilling depth 180 mmdrilling stroke 140 mmmotor power 2.2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricmotor rotation angle 65° right/leftweight 268 kgarticle no.: 320010A 2500702-speed motor, 1400/2800 rpminstead of 2.2 kw, (LLB/BS/BSK)A 250055Eccentric presser with column and clamping crossfor LLB 200/300/320A 3504154-wheel chassis for LLB 300/320/400with 2 swivel castors and 2 brakes onown wheels 2 brakes onown frameA 25012890° plug-in stop for LLB 200A lling grid system SH LLB 300 D/320 Dwith 4 rows of holes 16, 20, 22, 25 mm,Bowden cable operation Dcjdpfx Adsvwfrzodjr

Condition: ready for operation (used), Technical characteristics Dcedot Dgacjpfx Addsr Mortise length : 20 to 110 mm Mortise thickness : 2 to 29 mm Max. mortise depth : 110 mm Cast-iron frame, aluminum table Manual workpiece clamping (2 vertical pressers and 1 front presser) Motor 1.1 kW (1.5 hp), 3000 RPM Wood dimensions : Width : 30 to 150 mm Thickness : 15 to 80 mm Automatic part feed from magazine Automatic mortising head feed Power and Motors Voltage: 380 V Pluging: Three-phased Power: 1,5 Kw Motor: 1,5 CV Overall dimensions Lenght: 4100 mm Width: 1350 mm Height: 1500 mm Weight: 600 Kg

Condition: new, - NEW -Standard equipment:Motor 1.5 kWSpindle speed 2880 rpmMax. Spindle height above the table 160 mmMax. Drilling stroke 345 mmMax. Cross stroke 245 mmSpindle stroke 160 mmDrilling capacity 0-20 mmMax. Tool length 175 mmEccentric clamp 1 pcRotatable machine table 800 x 400 mm /- 45°Pivotable / rotatable drilling unit as optionTiltable machine table as optionMachine dimensions 1500x1100x950 mmMachine weight 345 kgincluded:- Suction nozzle no. P41 55- 2nd clamping eccentric no. P41 25- Dowel drilling device with 4 grid dimensions no. P41 20- Single lever operation- 2 speeds 1.5/1.9 kW 1440/2880 rpm no. P41 07- Digital display of spindle / drilling height no. P41 34 Dcjdevwflzepfx Addjr

Condition: ready for operation (used), Technical characteristics 3-axis controlled mortising machine Max. machinable solid part size : 275 x 160 mm Max. mortising depth : 130 mm Hydraulic motor : 0.75 kW Work table : Dimensions : 1000 x 310 mm Longitudinal travel : 400 mm Cross travel : 150 mm 2 extensions, length 1200 mm Extension with electronic stop : 2600 mm Electronic stop travel speed : 40 m/min Workpiece clamping with hydraulic pistons (2 front and 2 vertical) Mortising heads : Manual vertical adjustment Motorized vertical adjustment Vernier for quick calculation of chisel oscillation angle Djdpfxet Dgais Addscr 2.2 kW motor Pneumatic circuit operating pressure : 6-8 bar Upper suction mouth diameter : 80 mm Suction speed : 25-30 m/sec Power and Motors Voltage: 380 V Pluging: Three-phased Power: 3 Kw Motor: 3 CV Overall dimensions Lenght: 1000 mm Width: 1400 mm Weight: 850 Kg

Condition: ready for operation (used), Technical characteristics Motor 1,5 kW Support for door Stroke 200 mm Max depth 150 mm Dcsdpfxet Dgbte Addsr Manual presser Manual up/down Power and Motors Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics 200 mm stroke cast iron table max depth 150 mm trim protection manual presser Caractéristiques mortaisageDoor stand Djdpfxst Dgcks Addscr MortaisageChain Power and Motors Power: 1.5 Kw Overall dimensions

Condition: ready for operation (used), Technical characteristics Pneumatic table feed Per side: 4 adjustable upper mortising heads 3 rear horizontal heads including 1 adjustable Dimensions de la table1000 x 200 mm Nombre de têtes de mortaisage14 Caractéristiques mortaisageTilting table MortaisageSpindle Dodpfet Dgc Dsx Addscr Power and Motors Overall dimensions