Used Sls for sale (583)

Condition: good (used), Year of construction: 2017, 1 used machining center Brand DMG Type Milltap 700 Year of manufacture 2017 Serial number A00007 with interchangeable pallet and robot automation Control system: Siemens 840D SL Travel paths: X 700 mm Y 420 mm Z 380 mm Table size 840 x 420 mm Spindle Speed: 10,000 rpm Tool holder: DIN30 25-position tool changer Dimensions and weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg Condition Iasdpfx Aov T Rtisdwel Condition: Used Functional: Tested and fully functional Other equipment and included accessories: Tool changer Chip conveyor Internal tool cooling with high-pressure system 40 bar Preparation 4-axis Oil and emulsion separator Air blown through spindle center Nano package Renishaw measuring kit WH 3 workpiece loading and unloading system with 6-axis Fanuc robot PGN 50 special gripper unit

Condition: like new (used), Year of construction: 2019, operating hours: 1,550 h, functionality: fully functional, With the EMCO short bar loader SL 1200, EMCO offers the perfect solution for the automatic feeding and reloading of pre-cut bars up to a maximum bar length of 1200 mm. The advantage: small footprint and short loading times due to reduced stroke lengths. The control system is perfectly adapted to the machine interface. - Automatic feeding and reloading of pre-cut bars - Maximum bar length: 1200 mm Iaedpfx Asyabuzsdwol - Compact design for minimal footprint - Short loading times thanks to shorter strokes - Control system perfectly matched to the machine interface Technical features / specifications: - Product type: short bar loader - Model: SL 1200 - Manufacturer: EMCO - Maximum bar length: 1200 mm

Condition: refurbished (used), functionality: fully functional, EXTRUDER UNIT FOR BRICKS AND CERAMIC BLOCKS BRAND: BEDESCHI MODEL: SL 750 EXTRUDER DIAMETER: 750 mm (cylindrical) PRODUCTION CAPACITY: 120 tons/hour (at 12 bar pressure) SCREW ROTATION SPEED: 10 / 17 rpm (controlled by ABB ACS 800 VECTOR INVERTER – 693A Output) TRANSMISSION: DIRECT DRIVE WITH BREVINI PDL 702 GEARBOX (remanufactured) AXIAL RETENTION: SKF 29452 Series E (new) DISC CLUTCH (2 units) GENERAL REFURBISHMENT: Blades, linings, pins, seals, clutch discs, paddle shaft bearings, blade sets, axial bearings, vacuum chamber lining (stainless steel), bearings for electric motors Operational test performed, painted and aesthetically finished. COMPLETE WITH: • HYDRAULIC OIL SYSTEM FOR GEAR SHIFT, FILTER, DEGASSER OPERATION • 2 WEAR-RESISTANT METAL-PLATED FILTERS FOR HOLES • CENTRALIZED LUBRICATION UNIT WITH FILTER • DISC CLUTCH (FOR EXTRUDER + DEGASSER) • ORIGINAL BEDESCHI DRIVE BELTS (FOR BOTH UNITS) • EXTRUSION MOTOR 315 KW, 6-POLE (original Bedeschi) Ijdpfx Asx U Ukajdweal • DEGASSING MOTOR 75 KW, 6-POLE • MOTOR LUBRICATION UNIT • VACUUM GROUP MOTOR 30 KW, 4-POLE • MAIN DRIVER ASSEMBLY WITH BELT TENSION ADJUSTMENT GUIDES • EXTRUDER BASE FRAME • DEGASSER UNIT • INLET PULLEY SUPPORT • DEGASSER WITH 2 COUNTER-ROTATING SHAFTS WITH PADDLES (VACUUM CHAMBER) • SLEWING JIB CRANE (original Bedeschi) with electric hoist ACCESSORIES INCLUDED IN THE SALE 1- 3 DIE HOLDERS BY TECNOFILIERE (ITALY) 2- 1 FLANGE WITH BOLTS FOR 2 SIMULTANEOUS DIES 3- 1 ABB ACS 800 INVERTER CABINET (extruder motor) 4- 1 OIL VACUUM PUMP UNIT 30 KW 5- 1 400L VACUUM STORAGE TANK MORANDO LV 8/12 HIGH-SPEED ROLLER MILL (refurbished) TECHNICAL SPECIFICATIONS Original manufacturer: MORANDO IMPIANTI Type: HIGH-SPEED ECCENTRIC PRESS, ELECTRONIC ACTUATION Cylinder width: 1200 mm Cylinder diameter: 800 mm Complete with: • Original Morando base platform • 01 complete spare roll for quick replacement (bearings, shaft, pulley) • Original Morando material inlet cover • Hydraulic control unit for structural load management • Servo-driven rolling gap calibration system • Original Morando documentation Mantle Condition Fast roll: 80% Slow roll: 60%

Year of construction: 2015, condition: ready for operation (used), A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/400mm, swivel range: +/-35°, control: Siemens 840D sl. 5) Vertical chamfering/deburring machine EMAG VLC100C, max. workpiece diameter: 100mm, max. workpiece height: 150mm, travel X/Z: 900mm/375mm, control: Siemens 840D sl. 6) Internal automation EMAG TrackMotion with 2x TransLift carriages. Type: transfer automation, purpose: part feeding/intermediate station transport/part removal, control: HT8. 7) O-belt automation for each EMAG machining machine with pallet and belt buffer, max. pallets: 24pieces/machine. 8) Marking press Markator for part marking. 9) Part handling unit EKF Automation in gantry design. 10) Basket stacking cell EKF Automation for the finished parts storage, number of stacks: 3. Documentation available. An on-site inspection is possible under power connection. Ijdpex Dm D Ijfx Adweal

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, soot filter, Internal reference number for customer inquiries: 4093---- MAN TGS 33.520 6x6 BL Chassis with Short Wheelbase 3,900 mm !!! ALL-WHEEL DRIVE !!! !! IMMEDIATELY AVAILABLE FROM STOCK !! * EURO 6E!! * TM Cab: the comfortable version (narrow, long, medium-high) * 6x6 all-wheel drive * Suspension type leaf/air (BL) * 3,900 mm main wheelbase, 1,400 mm wheelbase between rear axles * MAN D2676 LF78 diesel engine, 520 HP, 2,600 Nm torque, Euro 6e * MAN TipMatic 12.28 OD automated gearbox with Retarder 35 * Retarder Eco, speed-dependent, multi-stage, energy efficient * High-performance engine brake MAN EVBec, multi-stage * Differential locks front, rear, and on the driven rear axles * ROCKINGER trailer coupling type 500 G 6A (or 40 mm upon request) * MAN EasyControl control panel, 4 functions, operable from outside when the door is open * Driver comfort seat, air-sprung, with lumbar support, adjustable shoulders, and seat heating * Multifunction leather steering wheel, height and tilt adjustable * Lower bunk with slatted frame and adjustable headrest * Electric interior sunblind on windscreen * Pull-out fridge and drawer * MAN SmartSelect infotainment controller with touchpad and quick access * MAN Mediasystem Navigation Professional 12.3-inch * MAN Advanced Sound System with subwoofer * Smartphone integration Iedoxnn A Tepfx Adwoal Possible Short Timber Body: PAVIC OPTIPA steel short log body 6,100 mm load length with aluminum front wall and 4 OPTIPA SL bolster sets with 8 OPTIPA AL10 aluminum stakes, and numerous equipment features. (Optionally also with fewer stakes/bolsters) Crane: Choice of: - Palfinger Epsilon M12Z Classic 10.5 - Palfinger Epsilon Q150Z 9.6 - TajfunLIV 150Z 9.6 - TajfunLIB 150Z 9.6 cab-mounted crane Financing / hire purchase as well as leasing / partial amortization leasing possible with our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes.

Condition: good (used), Year of construction: 1998, Mori Seiki SL-65MC CNC Lathe with Mori Seiki MSD-516 II CNC Control, 600mm 3 Jaw Chuck (Powered), 12 Position Tool Turret, Tailstock, Swarf Conveyor. S/No. 44 (1998) - CE Mark Iajdpfx Aex Hi Udedwel

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 09/2026, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space volume: 91 m³, total width: 2,550 mm, Equipment: ABS, bioSTAR 91.3 cbm Basalt Grey Chassis Type: Moving Floor Kingpin Load (National, t): 12 Axle Load (National, t): 8 Axle Spacing (mm): 1310-1310 Fifth Wheel Height (mm): 1150 Chassis Width (mm): 1200 Loading Width (mm): 2475 Chassis Series: 135 Gross Vehicle Weight (technically permitted): 39 = 12 + 9 + 9 + 9 Wheelbase (WB) Moving Floor Trailer (mm): 7850 Internal Height Front (mm) (IHF): 2641 Internal Height Rear (mm) (IHB): 2821 Iodexdqbkepfx Adwsal Loading Length (mm): 13513 Volume (m³): 91.3 Overall Width (mm): 2550 Overall Length (mm): 14000 Chassis Tyre Size: 385/65R22.5 Chassis Neck Height (mm): 217 Axles: JOST Brake Version: Disc Brakes Brake Type: JOST - DCA-T7 Offset (ET): 120 Option 1st Axle with Traction Aid Traction aid optimised with activation via push button in the truck (installation of button not included in scope of delivery) and by pressing the brake pedal three times Option 3rd Axle: Without Brake Pad Wear Indicator: Connected Tire Pressure Monitoring: Wabco TrailerPulse Air Suspension: ECAS with raise/lower valve Lowering of air suspension via Smartboard, as well as raise/lower valve Coupling Head Pneumatic: European palm coupling Wheels: Speedline Diamond Wheel Nut Caps: Chrome with STAS logo Landing Gear: Weweler steel gearbox landing legs, type Weweler, with compensating feet, single-sided operation, and 2 speed stages Underrun Protection Operation: Fixed underrun bar Lighting Manufacturer: Aspöck Lighting Type: EUROPOINT III – LED 2 pcs. LED reversing lights, rear, installed left and right on lamp bracket Work Lights (operated via switch): 2 pcs. LED reversing lights, front, left and right in direction of travel, mounted in the area of the landing gear Hydraulic Coupling: Rotary coupling Hydraulic Coupling – Position: Connection point at front wall (additionally with connection possibility at landing legs) Hydraulics positioning: pressure back, pressure left, return right (CON) Air connection in the toolbox Aluminum access ladder 3.80 m – right-hand side in direction of travel Broom and shovel holder, three holders each, mounted on chassis, left-hand side in direction of travel Moving Floor System: Brand Cargo Floor Air/electric console centrally mounted in direction of travel, with support bracket Lighting unit protection: one-piece splash guard Body Front wall angle (°): 90 Rear wall angle (°): 90 Rear wall type: Swing doors A-panel: Folding on the rear wall, mounted right in driving direction Cover plate between floor and front wall: Fixed aluminum plate and PVC strips Fifth Wheel Plate Type: Standard Front wall profile: 3 mm - 2 mm Side wall profile: 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Wear plates: Rectangular 1500 x 1000 x 4 mm Floor system operation: Radio remote control Cargofloor Control Type: CF 500 SL-C - E-CONTROL Floor profile type: 8 mm ribbed Moving floor closure plate: Stainless steel With additional plastic guides below the floor profiles End cap reinforcement: Stainless steel shoes over the end caps of the floor profiles, with aluminum wear plate above the end caps Oil temperature sensor for moving floor system Residue-free discharge wall Rear wall: Aluminum Swing door version: split 1/2 to 1/2, with transverse door header Door wing opening: right door wing opens first (STAS manufacturer’s choice) Transverse door header: swivel version Door header material: Aluminum Rear door locking: 1x swivel bar per door half

Condition: used, mileage: 3,08,000 km, power: 169 kW (229.78 HP), first registration: 05/2017, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro6, Equipment: ABS, Manufacturer Mercedes Model Atego 1323 4x2 Euro 6 Hvidtved Larsen Cityflex Iedpfxjw Ikpds Adwjal Year 2017 Condition Good Serial Number WDB96720620037282 Ref. nr. 447927 Reg. date: Hk: 230 Km: 308000 Gearbox: Manual Eurotype: 6 Cabin type: Atego Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 285/70R19,5 - 285/70R19,5 Cover% left 40% - 80% Front suspension: Parable Suspension rear: Parable Total weight: 12000 Kg Manufacturer: J. Hvidtved Larsen A/S Tank capacity: 4000 L High pressure pump: Uraca P3-10 127 lpm 100bar Vacuum pump: Wittig SLS 54 5400 lpm Flush hose: 50m 3/4? Suction hose: 30m 3?

Condition: excellent (used), working width: 700 mm, pass-through height: 80 mm, Double-sided roller gluing machine / glue application machine Manufacturer: Bohrer Iaodpfxjx U T Tye Adwsl Model: SL 70 Double-sided glue application machine, with disc roller conveyor at the outfeed Working width: 700 mm Passage height: approx. 80 mm Application roller grooved Height adjustment manually via handwheel Dimensions approx. 1300 x 600 x 1500 mm (LxWxH, without disc roller conveyor)

Condition: used, Year of construction: 2005, functionality: fully functional, For sale is a complete shrink sleeve system consisting of an Etisleeve sleeve applicator and a multi-zone steam shrink tunnel Powersteam, both from the renowned manufacturer Sleever International. The system was in productive use until recently and efficiently processes shrink sleeves with high precision onto cylindrical containers. Machine Configuration: Sleeve Applicator Manufacturer: Sleever International Model: Etisleeve Type: 75 SL 2V 80 Year of manufacture: 2005 CE-compliant Steam Shrink Tunnel Manufacturer: Sleever International Model: Powersteam Type: MSA 250 Year of manufacture: 2005 Control & Operation – Integrated HMI control panel – Digital input of sleeve length – Performance display (products/min) – Cycle and process control – Safety monitoring (housing supervision, reset function) – Production and daily counters Iedex Tg Ubjpfx Adweal Technical Features: – Precise vertical sleeve application – Automatic sleeve film unwind – Centering station for precise positioning – Multi-zone steam shrink tunnel with stainless steel interior – Continuous stainless steel conveyor belt – Auger feed with interchangeable augers – Height- and format-adjustable guide rails – Full safety glazing with interlock system – Industrial-grade drives and robust mechanical components Formats & Performance: – Proven operation with 100 ml containers – Documented sleeve lengths (e.g., 155 mm) – Additional formats possible depending on configuration – Output depending on product approx. 40–80 containers/minute Condition: – Used – Complete and fully functional system Scope of Delivery: – Etisleeve sleeve applicator – Powersteam steam shrink tunnel – Integrated conveyor technology – Feed screws and visible format parts – Existing adjustment and format documentation The system is currently still fully assembled and available for inspection under production conditions. A live demonstration with product and sleeve film under power is possible by prior appointment. Location: – Berlin – Inspection possible Price: – On request

Condition: excellent (used), Year of construction: 2008, MACHINE DATA Type Machining center - Vertical Make SPINNER Type MVC 1100 Year of construction 2008 CNC control Siemens Country of origin Germany Delivery time immediately Freight basis ex location TECHNICAL DETAILS x-path 1100 mm y-path 510 mm z-path 510 mm rapid traverse 18/18/15 m/min Siemens control Type 840 D SL Shop Mill Table surface 1200x600 mm Iasdpfx Aottu A Hedwel Workpiece weight 1000 kg Spindle speed - infinitely variable 8000 rpm Spindle holder: ISO 40 Tool changer 24 Cooling through the spindle 20 bar Machine weight approx. 8 tons Space requirement approx. 3000x2350 m Store mill Preparation for 4 axis

Year of construction: 1998, condition: repair required (used), Manufacturer: LOH Model: SPS 120 SL Iedpex Hygksfx Adwoal Year of manufacture: 1998 The device is not working, the program cannot be loaded.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2025, next inspection (TÜV): 06/2026, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space volume: 91 m³, total width: 2,250 mm, Equipment: ABS, bioSTAR 90.6 cbm Iajdpfxjxhanze Adwsl Deep Black EU conformity Chassis type: moving floor National kingpin load (t): 12 National axle load (t): 8 Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1200 Loading width (mm): 2475 Chassis series: 135 Design-based technical max. gross weight (t): 39 Wheelbase (moving floor semi-trailer, mm): 7850 Internal height front (mm) (IHF): 2641 Internal height rear (mm) (IHB): 2778 Loading length (mm): 13513 Volume (m³): 90.6 Total width (mm): 2550 Total length (mm): 14000 Chassis Chassis material: steel Tyre size: 385/65R22.5 Chassis neck height (mm): 217 Axles: JOST Brake version: disc brake Brake type: JOST - DCA-T7 Offset (ET): 120 1st axle with lift axle and starting aid (option) 3rd axle with lift axle (option) Tyre pressure monitoring: Wabco Trailerpulse Air suspension: ECAS with lift and lowering valve Lowering of air suspension via Smartboard, as well as lift/lowering valve Wheels: Alcoa Dura Bright Landing legs: steel gear-type landing legs mounted at the front of the chassis, JOST MODUL type, single-side operation, 2 speed levels Control console: EBS operation on the left in driving direction, behind the axles Lighting manufacturer: Aspöck Lighting type: LED version (2 x 2 round) Hydraulic coupling: rotary coupling Smartboard Air connection mounted in the toolbox Aluminium access ladder 3.80 m - right-hand side in driving direction Loading pressure gauge Ø 63 mm - mounted on the side of the control panel Moving floor system brand: Cargo Floor Air and electrical console mounted centrally in driving direction with gantry Lighting protection: one-piece protective fender Superstructure Front wall inclination (°): 90 Rear wall inclination (°): 90 Rear door type: wing doors Cover plate between floor and front wall: fixed aluminium plate and PVC strips Standard fifth wheel plate (15T) Front wall profile: 3 mm - 2 mm Side wall profile: 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Operation of floor system: radio remote control Cargofloor control type: CF 500 SL-C - E-CONTROL Number of floor profiles: 21 Type of floor profile: 10 mm flat Moving floor closure plate: stainless steel Oil temperature sensor for moving floor system Residue emptying wall Type of residue emptying wall: aluminium Residue emptying wall: brush Residue emptying wall storage: 6 wheels with bidirectional cleaning (cargo floor) Rear wall: aluminium Design of wing door division: 1/2 to 1/2, with door end crossbar Opening of door wings: right-hand door wing opens first (manufacturer choice: STAS) End crossbar of doors: swing type Material end crossbar: aluminium Rear door locking: 1x rotary bar per door leaf Number of door handles - left door leaf: 2 per rotary bar Number of door handles - right door leaf: 1 per rotary bar Securing open door wings: spring holder with plastic protection Rear wall sealing: standard rubber seal Additional lock rear wall: single-acting pneumatic Operation of additional lock: manual via operator control on the side of the control panel Impact protection rear doors: aluminium ram buffer across the entire width of the rear wall Spriegel type: flat round aluminium tube Number and position of spriegels: 3 central spriegels (evenly distributed, centre) and 1 rear spriegel (rear) Curtain holders: multifunctional (rotatable and foldable) 4 pcs Curtain holder positions: right side wall Distance from lower corner profile to upper side wall: au (incomplete)

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, year of last overhaul: 2025, input voltage: 400 V, DGUV certified until: 12/2026, overall weight: 258 kg, total width: 880 mm, total length: 700 mm, input frequency: 50 Hz, input current: 16 A, electrical fuse: 16 A, Spiral Mixer Kemper F 30 SL Stainless steel bowl and kneading arm New flour dust cover Iajdsx N S Daepfx Adwel 2 speeds, 1 timer Robust technology Mobile machine Only with us: DGUV V3 tested Connection: 400V, 16A-CEE plug Refurbished used machine With warranty and service Option: Maintenance contract Service package Training & commissioning Many more spiral mixers in stock!

Year of construction: 2008, condition: used, Model: SL-5A-K Refrigeration capacity: 15 kW Cooling capacity: 12 900 kcal/h Compressor input power: 3.7 kW Compressor power: 5 HP Refrigerant filling quantity: 2.5 kg Water tank capacity: 90 L Evaporator type: Serpentine pipe type Freezing water pipe size: 1″ Freezing water flow rate: – 90 L/min – 5.4 m³/h Fan type: Axial flow type blower fan Fan motor power: 0.45 kW Iedpfx Adex H Rqaowsal Safeguard: – High & low pressure protection – Compressor overload protection – Pump overload protection Power supply: AC 3 + N + PE, 50 / 60 Hz Dimensions (L × W × H): – 1100 × 680 × 1100 mm Weight: 160 kg

Condition: ready for operation (used), Year of construction: 2023, This 5-axis DMG MORI DMP-70 was manufactured in 2023, featuring a Siemens 840D sl control and a BBT30 direct-drive spindle with a maximum speed of 24,000 rpm. It includes a 25-tool ATC and coolant through spindle at 40 bar. Ideal for high-speed, 5-axis machining with its integrated swivel rotary table. If you are looking to get high quality machining capabilities consider the DMG MORI DMP-70 machine we have for sale. Contact us for more information about this machine. Application Types Milling Ijdpfjx D H Hijx Adwoal

Condition: used, Year of construction: 2015, Working hours laser on: 32824 h Working hours beam on: 28572 Laser power: 3000 kW Max. steel: 8 mm Max. stainless steel: 5 mm Max. aluminium: 6 mm Max. copper: 4 mm Max. brass: 4 mm Length: 18000 mm Width: 9000 mm Height: 2800 mm Machine weight: 21000 kg max. tube length: 6500 mm max. length finished parts: 4500 mm max. tube diameter: 152 / 170 mm min. tube diameter: 12 mm max. tube weight: 25 kg/m Standard configuration Machine: Stable machine frame Pipe support raw material with automatically retractable pipe supports Push-through chuck with self-centering parallel clamping rollers High-precision drives LoadMaster Tube 6.5m with bundle trough exclusion station parts tray Pipe support finished part with extendable guide rollers Scrap conveyor belt with bin Closed beam guidance via fiber optic cable (LLK) PierceLine NitroLine FocusLine Programmable cutting gas pressure automatic switch-off Ergonomic control panel with color touch screen Trump TruLaser: External solid-state laser TruDisk 3001 with 1 LLK outlet, diode-pumped disk laser with a wavelength of 1.03 nm Ijdpfx Adouqdg Tswoal Excitation via pump diodes laser power control Logbook function LAser cutting unit: universal cutting unit One cutting head strategy ControlLine control: Sinumerik 840 D SL easy handling Online help Integrated technology data Teleservice via the Internet Data transfer: RJ45 network connector USB Security: CE marking multi-beam light barriers Monitoring system for gas pressure, temperature and cooling water Compact dedusting system Protective cabin with certified safety panes Extended machine accessories - Rapid Cut- Bevel cut technology package- Finished part length +1.5 m (to 4.5 m)- SeamLine Tube- Wireless Operation Point- Low-scratch version LoadMaster Tube 6.5 m- Tube diameter 15 mm Automation - LoadMaster Tube 6,5 m with bundle support

Condition: new, functionality: fully functional, machine/vehicle number: 005119, Year of construction: 2016, Equipment: documentation/manual, Swivel Arm – Spare Part – König Loader KA SL260 Complete new threaded spindle 25x25 KA-SL V4 with mounting components Koenig Automation AG – Switzerland, item 005119 new and unused Iodpfox Tqhlox Adwsal for lifting movement of the swivel arm in the Z-axis Price / details on request. All technical data subject to typographical errors/mistakes. Sale exclusively to countries within the European Community.

Condition: used, maximum load weight: 27,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space volume: 100 m³, Year of construction: 2023, Equipment: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length silver grey BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross vehicle weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg King pin height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS KING PIN HEIGHT: Precise king pin height is 1,150 mm. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 t Suspension: Original SAF air suspension Brakes: Large disc Wheel offset: ET 120 Brake wear indicators (BVA) included The first axle is a self-lifting axle controlled via the EBS-E system. The third axle is a trailing steering axle. CONNECTIONS BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. Including traction aid. TRACTION AID: The traction aid is activated by pressing a button in the truck (button in truck not included). AIR SUSPENSION: Lifting and lowering function. Aluminum air tanks. STEERABLE TRAILING AXLE LOCKING: Locking of the steerable trailing axle is managed as follows: - via reverse lights - by button in truck (button in truck not included) TYRES: 6 x 385/65 R 22.5 tyres for regional haulage (manufacturer's choice) on ALCOA MATT aluminum rims, ET 120. BRAKING SYSTEM - EBS: EBS-E system WABCO 2S/2M - PREMIUM MODULATOR Dual-line compressed air braking system in accordance with CE guidelines. Spring-loaded parking brake operating on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) Iedpfsxplxzex Adwsal LIGHTING - ASPÖCK: 24 Volt electrical equipment. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED lighting mounted on the trailer side. Without junction box at rear - NORDIC. REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is installed in the fixed aluminum underrun protection. With foldable aluminum lighting cover. 2 x 1 five-chamber lamp - EUROPOINT III - LED version. HYDRAULICS POSITION: Connection at the front wall. With additional connection option below the body in front of support legs. ACCESSORIES EXTENDIBLE LADDER AT REAR: Extendible ladder integrated at rear of vehicle, right side. PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER: Single aluminum spare wheel holder. 2. BODY FRONT WALL: The front wall is made of heavy-duty aluminum plank profiles. INTERNAL SEALING BETWEEN FLOOR AND FRONT WALL: Fixed sealing between floor and front wall using aluminum profile and PVC gasket. SIDE WALLS: Inner and outer surfaces smooth. Double-walled side wall profiles, 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain specification). Side wall profiles are fully welded on the inside. WEAR PLATE: Aluminum wear plate, rectangular, inside rear, 2000 (L) x 1500 (H) x 4 mm. MOVING FLOOR SYSTEM: CARGO FLOOR CF 500 SL-C, electric control. 21-board floor system. Drive unit consists of 3 double-acting hydraulic cylinders with 200 mm stroke. Rear end plate in stainless steel. FLOOR SYSTEM OPERATION: Electric control with radio remote (genuine Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation using unique red Cargo rotary knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floor boards. FLOOR BOARDS: 21 aluminum floor boards - 8 mm ribbed, with welded aluminum end caps. REAR DOOR: 2 portal h

Condition: used, maximum load weight: 29,760 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 05/2026, loading space length: 9,607 mm, loading space width: 2,440 mm, loading space height: 2,400 mm, loading space volume: 53 m³, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, Equipment: Air suspension Safety: ABS * EBS Isdpfx Aswwn I Dsdwoal * Disc brakes Extras: Rental possible, various sizes in stock! * Schmitz SKI 24 SL 9.6 – aluminum tipping body with overlapping tailgate & combination doors * +Grain chute from 40 m³ * Aluminum tipper body (AK) 9.6, height 2100 mm, internal wall thickness 2.5 mm, rounded lower frame * Aluminum floor, rear approx. 3600 mm in 8 mm, front 7 mm * Interior weld joints, welded, 9.6 * GMP certified * Automatic lowering during tipping operation * E-bike holder for 2 e-bikes * Load pressure gauge * 4 separate reversing lights * Spare wheel holder * Lease-purchase possible! * Work platform with ladder front left and ladder for climbing into the tipper (mounted on front wall) * 1 pair of additional tension locks * Automatic mechanical 4-hook locking mechanism * 1 central grain chute with cover * 1 additional straight crossbar with tension chain, 90° swiveling, removable, telescopic * PVC roll tarpaulin with roller profile (tube) and side stops (9.6) * Rear tarpaulin fastening with bottom tension cords * Long tarpaulin operating rod, 2650 mm * 1 lateral tarpaulin fastening with tension strap and ratchet

Condition: new, axle configuration: 3 axles, loading space length: 7,480 mm, loading space width: 2,354 mm, loading space height: 1,460 mm, loading space volume: 24 m³, total height: 3,400 mm, Year of construction: 2026, Tipper semi-trailer Schmitz Cargobull SKI 24 SL 7.2 with 24.6m3 volume + Cramaro ne + LED taillights First registration: without registration New vehicle Km: 500 Color: light gray Technical data Tires 385/65R22.5 * Overall length approx. 7480mm * Overall width approx. approx. 2354mm * Side wall height approx. 1460mm * Total weight (perm./techn.) 36,000/39,000kg * Empty weight 6214kg * Condition new vehicle Equipment Ijdsx Uvhgepfx Adweal Electric tarpaulin Cramaro + remote control * Side wall in 4mm steel * Rear wall resting on top, 1 pair of additional tension locks * Automatic, mechanical 2-hook locking * SR trough floor 7.2 in 5mm steel * Aluminum hanging ladder 3500mm with bracket on the side of the longitudinal beam * Support winch t * EBS electronic braking system * Automatic lowering during tipping * Loading pressure gauge * Lift axle automatic/pneumatic traction aid electric * Air suspension * Hydraulic cylinder 170-250bar suitable for low and high pressure operation * Disc brakes * LED reversing lights Technical specs Tires 385/65R22.5 * mm Length 7480 *mm Width 2354 * mm Side walls 1460mm * kg total load / total load tech 36,000kg/39,000kg *kg Empty Weight 6214 * New trailer Equipment Electric canvas Cramaro with remote control * Side walls 4mm steal * Rear wall toggle claps with rubber seals * Bottom 5mm steal * Aluminum ladder 3500mm * EBS electronic braking system * Automatic sinking when tipping is in process * Trailing axle * Disc brakes * Air suspension * Hydraulic cylinder 170-250bar for operating in high and low pressure *LED rear lights * Loading pressure gauge Offer subject to change from Cologne location. Subject to prior sale and errors. Sales only to traders. Non-binding offer EXW Cologne. Intermediate and mistakes excepted. Sale to businesses only. We speak German - We speak English - Hablamos español - Nous parlons français - ????? ????? - ????? ????

Year of construction: 2018, operating hours: 5,080 h, condition: ready for operation (used), General Data Machine weight 4700 kg Measurements height 1852 mm Dimensions Iasdpfxox D Huaj Adwol Machine Length 1928 mm Control Unit Brand SIEMENS Model 840D Main Drive Number of axis 3 Spindle Speed 5000 RPM Spindle motor power 16.5 kW Movement X-Axis Movement 242.5 mm Z-Axis Movement 540 mm Y-Axis Movement 80 mm Technical Specification Driven Tools yes This 3-axis DMG CLX 350 V4 was manufactured in 2018 and features a max turning diameter of 320 mm, spindle speed up to 5,000 rpm, and a bar capacity of Ø 65 mm. It includes a VDI 30 turret with 12 stations for driven tools, enhancing versatility. Ideal for precision turning with rapid traverse rates and Siemens 840D sl control for advanced operations. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2024, General Data Measurements width 2710 mm Measurements depth 3900 mm Measurements height 2470 mm Machine weight 10000 kg Main Drive Iajdpfjx D R U Rsx Adwol Spindle speed range 5000 Spindle motor power 14/17 kW Number of axis 5 Additional Equipment Dynamic two-pressure clamping for the main and counter spindle Tailstock function for the counter spindle with foot switch This 5-axis DMG MORI CLX 450 TC + Robo2GO was manufactured in 2024. It features a universal turning/milling center with a main spindle speed of up to 5000 rpm and a milling spindle speed of up to 12000 rpm. The machine includes a B-axis of ±120°, Y-axis travel of ±100 mm, and a 30-fold chain magazine. It's equipped with Siemens 840D sl control for precision. Consider the opportunity to buy this DMG MORI CLX 450 TC + Robo2GO turn-mill centre. Contact us for more information. Application Types Turning

Year of construction: 2014, operating hours: 13,252 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D SL Main Drive Number of axis 2 Spindle Speed 4000 RPM Spindle motor power 17.5 kW This DMG CTX 450 V3 horizontal turning machine was manufactured in 2014. It features a Siemens 840D SL CNC control, a 12-position VDI 40 tool turret with driven tools, and a high-torque main spindle. The compact design includes side chip discharge and a heavy-duty hydraulic tailstock. Ideal for high-precision turning, it also has a bar machining capability with a maximum bar diameter of 65 mm. Contact us for more information about this machine. Application Types Iasdsx E Eaaspfx Adwsl Turning

Year of construction: 2022, operating hours: 2,047 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D SL with ShopTurn Iedpfjx E D Uvox Adwsal Main Drive Number of axis 3 Spindle Speed 4000 RPM Spindle motor power 25.5 kW This 3-axis DMG CLX 450 V6 was manufactured in 2022. It features a Siemens 840D SL control, a main spindle with a maximum speed of 4000 rpm, and a counter-spindle reaching 5000 rpm. The machine includes a 12-position servo turret with driven tool stations and a Y-axis stroke of ±60 mm. If you are looking to get high-quality turning capabilities, consider the DMG CLX 450 V6 machine we have for sale. Contact us for more information. Application Types Turning