Used Smalcalda Drilling Machine for sale (66,162)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines Dkodpjwh Rp Eofx Aptjt - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: used, machine/vehicle number: 008727, Max. panel width: 3200 mm Dksdpfxezylv Ue Aptst Max. panel length: 1000 mm No of Bottom Units: 8 No of Top Units: 4 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: good (used), functionality: fully functional, fuel type: electric, Core drilling unit / core drilling machine Dkjdpfx Apozw Uz Ustjt Manufacturer: HILTI with core drilling stand with the core drilling bits shown in the picture with extension, etc. Pickup or shipping available! Both options are possible!

Condition: like new (used), operating hours: 20 h, functionality: fully functional, TECHNICAL DATA Number of spindles: 21 Distance between first and last drill bit: 640 mm Distance between centers of individual spindles: 32 mm Maximum workpiece size: 50 x 915 x 3000 mm Maximum drilling depth: 65 mm Number of pneumatic hold-downs: 2 Working table height of the drilling machine: 860 mm Maximum hold-down height above table: 70 mm Operating pressure: 6–7 bar Air consumption: 10 l/cycle Motor power: 1.5 kW Noise level: 76.1 dB Speed: 2800 rpm Dimensions L/W/H: 1030/1030/1285 mm Weight: 275 kg PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling operations from 0 to 90° - Pneumatically adjustable drilling head angle - Cast-iron stops - Spindles suitable for quick couplings - Patented pneumatic workpiece clamps - Cast-iron worktable - Fast and precise adjustment - Accurate drilling Dkodpsy At Ndefx Aptst - Made in Italy Standard equipment of the machine: - 2 aluminium measuring scales, each 1.5 m (right and left) with two stops - 5 quick couplings - Wooden transport box for machine protection during transport ADVANTAGES - Drilling vertically/horizontally/at an angle - Multi-spindle drilling machine - New machine - CE certificate - Robust - Professional Net price €2,950.- Machine shipping not included Packaging included Net prices apply to international transactions and EU customers with a valid EU VAT ID No.

Condition: used, Year of construction: 1987, functionality: unexamined, number of spindles: 19, Schleicher Unidrill 19 Multi-spindle drilling machine Djdpfxozxk Uys Aptokt 19 spindles with 5 mm / 10 mm drills The machine is still in use and fully functional. Collection price – delivery possible upon request. The sale is made with the exclusion of any warranty for defects in materials and workmanship. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims due to fraudulently concealed defects also remain unaffected. An inspection of the machine is possible by arrangement.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 690189, overall weight: 386 kg, total width: 1,150 mm, pressure: 6 bar, operating pressure: 6 bar, number of spindles: 35, type of input current: three-phase, Condition as shown in the pictures. Dsdpjzyr Epefx Aptokt

Condition: good (used), Csepel RF50/1250 Radial Drilling Machine A robust and proven radial drilling machine from the quality manufacturer Csepel (Model RF50/1250). The machine is characterized by its solid construction and is ideally suited for metalworking shops, general workshops, or demanding DIY enthusiasts. Dsdpfx Apszninwstjkt Technical specifications (according to nameplate): Manufacturer: Csepel (Budapest) Type: RF50 / 1250 Power supply: 3~ (three-phase / 380 V) Frequency: 50 Hz Control voltage: 220 V Operating current: 10 A Required fuse protection: 16 A (slow-blow) You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2012, functionality: fully functional, Equipment: lighting, rotational speed infinitely variable, type plate available, From insolvency: Gillardon GB 40 VE Dkodpfx Apjtw Rk Totjt Year of manufacture: 2012 No. 4519-130-3913 electromagnetic feed 0.1/0.16/0.25 on the cross lever via push button Infinitely variable spindle speeds from 60-1600 rpm 2-speed motor work light emergency stop button 200mm quill travel 350mm throat depth table size 630x535mm – clamping surface 400x500mm MK 4 taper – with Röhm keyless chuck 3-16mm machine height 2060mm – weight approx. 480kg The machine runs very smoothly and precisely Table and columns with visible signs of use Digital speed display non-functional + vice Cekaba-Bon 230mm

Condition: excellent (used), MECOF AGILE CS 500 TNC 640 Boring Mill in technically flawless condition Technical Data: - Spindle taper: ISO 50 - Longitudinal travel: 6000 mm - Cross travel: 1250 mm - Vertical travel: 1700 mm Dkodpoy Rzklofx Aptst - Table size: 7300×1090 + (2 CUBI 1520×1000) mm - Spindle speed: 4000 rpm - CNC model: fidia CXR - Tool changer capacity: PICK UP UTENSILI 10 POSITIONS (5 ISO 50 – 5 HSK 50 E) - Power: 30 kW spindle The MECOF AGILE CS 500 TNC 640 offers a wide range of features and technical specifications to meet the most diverse requirements. With a longitudinal travel of 6000 mm and a cross travel of 1250 mm, it enables precise drilling and milling operations on large workpieces. The 1700 mm vertical travel ensures maximum flexibility and allows for machining at various angles. The table has a size of 7300×1090 mm and is supplemented by two additional cubes measuring 1520×1000 mm each. In this case, the machine has been installed at floor level. The boring mill is equipped with a powerful 30 kW spindle motor with a maximum spindle speed of 4000 rpm. The fidia CXR CNC control provides precise programming and easy operation. The tool changer with 10 positions (5 ISO 50 – 5 HSK 50 E) allows for fast tool changes to optimize your production process. The machine has been regularly serviced and is in technically excellent condition. It can be inspected under power or during ongoing production. Extensive accessories included. Additional pictures available. Dismantling, removal, shipping, and reinstallation can be organized upon request.

Condition: ready for operation (used), Gear-driven pillar drilling machine IBARMIA B 70 -Drilling capacity / steel approx. 70mm -Morse taper MK 5 Dkodpfx Ajzi E Tfjptot -Spindle stroke / drilling depth approx. 270mm -Speed range 62-1120 rpm (12 gear stages) -Automatic feeds - 6 stages (0.1-0.6 mm / revolution) -Spindle overhang - column 425mm -Table size approx. 770x660mm -Round column -Right / left rotation -Threading device -Coolant system -Work light -Motor power 5.6 KW -Emergency stop -Various tools / drill chucks / quick-change holders incl. inserts -Documentation Dimensions: L x W x H 1.1 x 0.7 x 2.7 meters / Weight 1900 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1995, 1 used radial drilling machine Djdezlgvtopfx Aptekt Manufacturer: Breda Type: R 55 / 1250 Technical data: Drilling capacity: 55 mm Overhang: 1200 mm Drill spindle taper: MK 5 Drill spindle stroke: 310 mm Spindle speeds, 12 steps: 30 - 1200 rpm Right-hand and left-hand rotation Feed rate, 8 steps: 0.06 - 1 mm/rev Drive power: 4.4 kW Vertical movement of the arm: 705 mm Clamping of the arm and drilling unit: hydraulic Usable machine bed with 4 T-slots: 1325 x 910 mm Coolant system Space requirement: approx. L 2100 x H 2500 x W 1000 mm Weight: approx. 3000 kg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 06060408, Description Grass Flexi Press (2006) including accessories Due to the purchase of a CNC machine, this professional Grass Flexi Press hinge and fitting drilling machine is no longer needed. The machine has always been well-maintained, has undergone annual inspections, and is in excellent/good condition. Ready for immediate use in the workshop! Specifications & Details: Make/Model: Grass Flexi Press Year of manufacture: 2006 Condition: Well-maintained and annually inspected Includes: Various accessories / drill bits Reason for sale: No longer needed due to switching to CNC Dsdjzrvaujpfx Aptjkt Interested or have questions? Please feel free to contact us for more information or to arrange a viewing of the machine.

Condition: used, Year of construction: 2016, Vertical CNC drilling and machining center Manufacturer: Weeke Type: Optimat BHX Year of manufacture: 2016 Technical data - Working area X: max. 3,050 mm - Working area Y: 70,850 mm - Workpiece thickness Z: 12,60 mm - Workpiece weight: max. approx. 35 kg - Number of axes: 3 - Milling spindle: 5 kW - Milling spindle speed: max. 18,000 rpm - Tool holder: HSK-F63 or ETP 25, depending on the version - Tool change: automatic tool magazine - Tool positions: 4 - Vertical drilling spindles: 13 - Horizontal drilling spindles X: 4 - Horizontal drilling spindles Y: 2 - Drilling unit: V13 High Speed - Drilling unit power: 2.3 kW - Drilling speed: 1,500 - 7,500 rpm - Max. drilling depth: approx. 38 mm - Drilling diameter: max. approx. 35 mm - Spindle spacing: 32 mm - Dado saw: in X-direction - Dado saw blade: approx. 100 mm - Workpiece transport: throughfeed system / transport chain - Workpiece clamping: collet gripper, vacuum-free clamping system - Control system: HOMAG powerControl / powerTouch - Software: HOMAG woodWOP - Total connected load: approx. 11.5 kW - Dust extraction connection: approx. 160 mm - Dust extraction air requirement: approx. 2170 m³/h Dkodpfx Apezy N E Hetet - Weight: approx. 1500 kg - CE Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1997, total width: 500 mm, total length: 700 mm, total height: 1,800 mm, Empty weight: 200 kg - Year: 1997 - Documentation available: No - CE certificate present: No - Power [kW]: 1.1 - Table length [mm]: 290 - Table width [mm]: 290 - Drilling depth [mm]: 80 - Drilling capacity [mm]: 20 - Reach [mm]: 225 - Min. spindle speed [rpm]: 210 - Max. spindle speed [rpm]: 2580 - Transport dimensions: 700mm x 500mm x 1800mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dksdpfx Apjzry Ntotjt Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,150 mm, overall weight: 12,000 kg, drill diameter: 32 mm, Heidenhain iTNC530 cnc control 12-fold tool changer Dkedpowcldajfx Aptot Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. For more technical details please look at the photos

Condition: excellent (used), Year of construction: 2014, feed length X-axis: 300 mm, feed length Y-axis: 300 mm, feed length Z-axis: 500 mm, General Aspects MAIN MOVEMENTS Maximum drilling depth - Z-axis: 500 mm Table, longitudinal movement - X-axis: 300 mm Table, vertical movement - Y-axis: 300 mm Drilling slide, piece support - W-axis: 50 mm Dedsu Au Duopfx Aptskt DRILLING SPINDLE Drilling diameter without pre-drill, optimal: 3 – 12 mm Distance between the bits: 250 mm Drilling spindle, rotation speed min - max: 0 - 6.000 rpm Drilling spindle motor power: 7.5 kW (S1) Cannon drill holder, for diameters less than 6 mm: Ø 10 x 40 mm Cannon drill holder, for diameters greater than 6 mm: Ø 25 x 70 mm CLAMPING TABLE Fixed clamping table, surface dimensions: 500 x 600 mm Maximum load capacity of the fixed table: 1.000 kg Standard type clamping slots: 18 mm OIL Cutting oil flow rate: 50 lt./min Cutting oil pressure: 90 bar Hydraulic pump motor power: 7.5 kW Hydraulic pump motor capacity: 600 lt Adjustable temperature: 27°-30°C DIMENSIONS AND WEIGHTS Width x length: 4.450 x 3.000 mm Approximate weight: 2.210 Kg POWER SUPPLY Electrical power supply: 400 V/3-phase/50-60 Hz Compressed air: 6 bar Total installed power: 25 kW

Condition: good (used), Year of construction: 1983, machine/vehicle number: 7486, functionality: fully functional, spindle mount: MK 2, total width: 480 mm, total length: 620 mm, total height: 1,295 mm, overall weight: 165 kg, spindle speed (max.): 2,800 rpm, spindle speed (min.): 450 rpm, stroke length: 100 mm, Solid bench drilling machine for individual or series production in good condition (used). Dkedpfowgfkujx Aptot

Year of construction: 1995, condition: good (used), Offer 22054 Technical data: - Drilling capacity - in steel: 15 mm - Drilling capacity - in aluminum: 18 mm - Drill spindle mount: MK 2 - Drilling depth: 70 mm - Spindle overhang / column: 180 mm - Drill spindle speeds: 80 - 4000 rpm - Drive: 400 V, 0.45 / 0.75 kW - Height-adjustable drilling table: 280 x 240 mm - Distance drill spindle / table: approx. 360 mm Dksdpfskt N Nljx Aptet - Distance drill spindle / base plate: approx. 410 mm - Space required: approx. W 280 x H 1700 x D 600 mm - Weight: approx. 85 kg - Includes: - Quick-change drill chuck 1 - 13 mm - Machine vise - Assorted used HSS drill bits 5 - 15 mm

Condition: excellent (used), Year of construction: 2015, bore capacity in steel (diameter) 40.0 / 50.0 mm throat 300 mm bore stroke 160 mm turning speeds 200 - 3200 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm engine output 1.8 / 2.9 kW weight 450 kg Current list price: approx. 20.000 euros Special price available upon request Features: - Robust column drill press * Drive: V-belt - VARIO - Automatic spindle feed * with electromagnetic feed clutch * 4 feed speeds: 0.1-0.2-0.3-0.4 mm/U * with electric cross-handle control - swivel work table * 1 station clamping table with 2 T-slots Dkodpfxozw N Eho Aptet * 1 station with ALZMETALL vise - stepless speed adjustment - Digital speed display - Adjustable drilling depth stop - Pole-reversible drive motor - Clockwise rotation of the drill spindle - Main switch Emergency Stop button - User manual (PDF)

Condition: good (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 55453, ACIERA 23 CNC DRILLING MACHINE With Aciera ISO30 quick-change system Machine tested and 100% functional Excellent price-performance ratio WITH CNC HEIDENHAIN TNC 125 Technical data Drilling capacity in steel 23 mm Thread cutting in steel M18 Spindle speeds: infinitely variable from 45 rpm to 4000 rpm Spindle stroke 120 mm Table length 590 mm Table width 320 mm Distance between table and spindle min. 110 mm Distance between table and spindle max. 570 mm Working path lengthwise 500 mm Transverse travel 300 mm Feed rates 0.02-0.6 mm/min Connection 50 Hz 3x 380 Volt Power 4.0 kWA Machine weight approx. 2110 kg Machine dimensions: length 1700 mm, width 1400 mm, height 2100 mm Technical data not binding. ACIERA 23 CNC DRILLING MACHINE With Aciera ISO30 quick change system Machine tested and 100% functional Excellent price-performance ratio WITH CNC HEIDENHAIN TNC 125 Technical data Drilling capacity in steel 23 mm Thread cutting in steel M18 Spindle speeds: continuously variable from 45 rpm to 4000 rpm Spindle stroke 120 mm Table length 590 mm Table width 320 mm Distance between table and spindle min. 110 mm Distance between table and spindle max. 570 mm Longitudinal travel 500 mm Dodpfxsu Tn Ras Aptjkt Working distance across 300 mm Feeds 0.02-0.6 mm/min Connection 50 Hz 3x 380 volts Power 4.0 kWA Machine weight approx. 2110 kg Dimensions machine: length 1700 mm, width 1400 mm, height 2100 mm Technical data non-binding.

Condition: used, Year of construction: 1988, Radial drilling machine Manufacturer: Tai Pin Type: TPR 1230 Year of manufacture: 1988 Drilling capacity in steel: Ø 42 mm Drilling capacity in cast iron: Ø 55 mm Dkodpfx Apoznvibjtjt Thread cutting (steel/cast iron): M25 / M38 Overhang (column to spindle center): 330 – 1,230 mm Spindle stock travel: 880 mm Column diameter: 300 mm Tool holder: MK 4 (Morse taper 4) Quill stroke (spindle stroke): 270 mm Spindle speeds: 12 steps, 37 – 1,253 rpm (at 50 Hz) Automatic feeds: 3 steps (0.05 / 0.09 / 0.15 mm/rev) Distance spindle – base plate: 467 – 1,360 mm Outrigger height adjustment: 620 mm 9926ä

Condition: used, bore capacity in steel (diameter) 40 mm threading bis M 30 throat 330 mm bore stroke 180 mm 4 Dkjdpjyzty Tefx Aptjt speeds 60 - 765 U/min table-size 720 x 360 mm total power requirement 2,6 / 3,2 kW weight 350 kg dimensions 720 x 1100 x 2050 mm Equipment: - automatic feed - infinitely variable speed - thread cutting device - adjustable drilling depth stop - coolant device - spindle protection - drill chuck

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 580 mm, feed length Y-axis: 200 mm, feed length Z-axis: 130 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 130 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 100 rpm, spindle mount: MK 4, throat depth: 286 mm, quill diameter: 130 mm, quill travel distance: 130 mm, type of input current: three-phase, total length: 860 mm, total height: 1,200 mm, table width: 240 mm, input voltage: 400 V, total width: 740 mm, table length: 800 mm, drilling capacity: 45 mm, position of the milling head: ±90°, drilling depth: 130 mm, workpiece weight (max.): 375 kg, distance table to spindle center: 450 mm, Equipment: documentation/manual, rotational speed infinitely variable, Drilling and Milling Machine ZX7045B VARIO (with automatic spindle feed) – professional metalworking machine The ZX7045B VARIO drilling and milling machine is a solid and versatile machine designed for professional metalworking in workshops, production plants and tool rooms. The machine allows drilling, milling and tapping operations, making it a universal solution for many machining applications. The machine is equipped with a powerful 2.2 kW motor and infinitely variable spindle speed control in the range of 100–3200 rpm. The spindle is mounted on precision bearings ensuring high machining accuracy, while the gear transmission operating in an oil bath guarantees durability and quiet operation. The head can be adjusted in height and tilted ±45°, allowing machining at various angles. The automatic spindle feed and automatic spindle reverse during tapping significantly improve operator convenience. A large worktable measuring 800 × 240 mm with T-slots allows stable clamping of workpieces. The heavy-duty construction and base ensure high stability during operation. The machine is also equipped with a cooling system and an emergency stop switch. Technical specification Parameter Value Model ZX7045B VARIO Dksdpfx Apoyvh Hqstjt Max drilling capacity 45 mm Max face milling diameter 80 mm Max vertical milling diameter 32 mm Max tapping capacity M12 Spindle taper MT4 Spindle travel 130 mm Spindle speed 100 – 3200 rpm Speed control variable Max distance spindle–table 450 mm Distance spindle axis–column 286 mm Table travel X 580 mm Table travel Y 200 mm Table size 800 × 240 mm Head tilting ±45° Motor power 2.2 kW Power supply 400 V Machine dimensions 860 × 740 × 1200 mm Weight 375 kg Delivery to the customer is possible. Shipping cost is calculated individually by the transport company. If you are interested in other machines, please visit our website.

Condition: used, Year of construction: 1992, bore capacity in steel (diameter) 32 mm throat 320 mm bore stroke 170 mm Dkodpfxevuz T Ns Aptjt 4 speeds 60 - 1600 U/min table-size 570 x 480 mm total power requirement 1,6 kW weight 650 kg dimensions 1200 x 800 x 2200 mm Features: - Automatic feed - Coolant device - Infinitely variable speed control - Adjustable fixed depth stop - Machine light - Drill chuck

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, operating hours: 1 h, overall weight: 280 kg, BOMA SB 32 V - Pillar drilling machine -CE marking -Exhibition machine / Unused -Spindle speeds / Stepless 50 - 2100 rpm -Stepless speed control -Threading device up to M16 Dsdpfxjzyz Uae Aptjkt -Morse taper MK 3 -Spindle stroke 135mm -Overhang 250mm -Work table size 415x375mm -Work table rotatable 360 degrees -Distance spindle - table approx. 850mm -Distance spindle - base plate approx. 1190mm -Column diameter 100mm -Safety device for drilling quill -Drill chuck -Documentation Dimensions: L x W x H 0.7 x 0.9 x 1.9 meters / Weight 290 kg Errors and omissions excepted.