Used Smoke Extractor for sale (1,984)

Condition: good (used), functionality: fully functional, type of input current: three-phase, total height: 2,000 mm, total width: 900 mm, total length: 1,600 mm, Höcker Polytechnik VACUMOBIL EA 160 Self-cleaning Dust & Chip Extractor Specification: • Condition – used, after inspection • Manufacturer – Höcker Polytechnik • Model – VACUMOBIL EA 160 • Turbine motor power – 3.45 kW • Filter self-cleaning mechanism • Turbine inlet – dia. 160 mm Blsdpfx Abexph Daozep • One collection bin for dust/chips • Automatic mode for extractor start synchronised with machine • Overall dimensions – 160 x 90 x 200 cm (L x W x H) Additional information: • Good, factory technical condition • Photos show the actual condition of the item for sale • Possibility to switch on and test the device on site

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Very good condition used smoke generator. Very little used. Blodoxpgpujpfx Abzep

Condition: used, Year of construction: 2015, operating hours: 424 h, type of input current: three-phase, overall weight: 1,000 kg, total width: 1,700 mm, total length: 1,650 mm, total height: 2,900 mm, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS Air FTower Filtration Tower, 5000 m³/h Industrial welding hall air filtration – suitable for various technological operations in manufacturing plants, primarily metalworking. Top air intake and draft-free bottom air discharge – delivers purified air directly to the workstations. Layered filtration and ventilation principle; the unit does not require duct installation. Cartridge filter inserts – self-cleaning via compressed air pulses during operation. Filter cleaning is controlled by pressure differential – ensures no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from above, filtered, and released at floor level as breathing-quality air, free of drafts, at a velocity below 1.2 m/s – precisely where employees inhale it, covering a wide 270° range. The tower operates according to the layered ventilation method, recommended by trade associations and considered the optimal air circulation method. Blodpfxsxg Nx Tj Abzjp Year of manufacture: 2015 Operating hours: 424 h Specifications: — Fan power: 5.5 kW — Capacity: 5000 m³/h — Filtration surface area: 80 m² — Filter cartridges: 4 units — Additional final stage F9-class fine filter increases purification efficiency and further protects the fan in case of main filter damage. — 100-liter dust drawer — Very quiet operation: 75 dB(A) — Filtration efficiency: > 99.6 % The unit is in very good technical condition. Warehouse number: 1049

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 120 M with automatic machine recognition Clean air extraction system with H3 approval Suction connection: 120 mm Nominal motor power: 1.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow: 1,140 m³ / h Nominal volume flow: 814 m³ / h Negative pressure: 2.180 Pa Filter area: 5,1 m² Chip collection volume: approx. 135 litres Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Weight: approx. 121 kg Location: Ex stock 54634 Bitburg Bljdpfjhkztwjx Abzjp - immediately available -

Condition: like new (used), functionality: fully functional, Bofa AD Oracle iQ fume extractor, air filter, dust collector for laser or other. In new condition, with new filters. Manufacturer: Donaldson Bofa Type: AD Oracle iQ Voltage: 115-230V Unlimited airflow (+/- 10%): 410 m3/h Adjustable airflow range: 100-380 m3/h Bedpfx Aboxf Didezelp Pressure (+/- 10%): 95 mbar Dimensions (H x W x D): 975 x 455 x 505 mm Weight (+/- 5%): 65 kg Noise level:

Condition: ready for operation (used), Dust collector, cartridge dust filter, dust filter – used machine Manufacturer: Dongguan Jieba Blsdpfexfkuyjx Abzop Type: Y3-132S1-2 Overall Dimensions: 1000 × 1030 × 2040 mm Electrical Data: 5.5 kW, 400 V; 11.1 A

Condition: good (used), functionality: fully functional, type of input current: three-phase, CORAL Sawdust Extraction Unit, 1 Bag, 2.2 kW Specification: Blodpexnbl Ijfx Abzep • Condition – used • Manufacturer – CORAL • Turbine motor power – 2.2 kW (3-phase) • Turbine inlet – 200 mm • Collection bag diameter – 1 x Ø 450 mm • 1 filter bag, size – 450 x 1100 mm (new) • Overall dimensions: 110 x 56 x 225 cm (L x W x H) Additional information: • Good, original technical and visual condition • The photos shown reflect the actual condition of the item for sale • Possibility to connect and test the unit on site • The price listed in the auction does not include VAT

Condition: excellent (used), Field of application: • Single and multi-station extraction in industry and trade • Free-flowing and dry dusts, health-hazardous dusts, dry chips Special features: • Filter cleaning method: • Brush cleaning (manual) • Cleanable permanent filter cartridge (dust class M) • Special versions with various filter cartridges, exhaust ports, special voltages, custom paint finishes, pre-separators, and external control via volt-free contact are possible Your advantages at a glance • High suction power due to side channel blower technology • Low operating costs • Quiet operation suitable for multi-shift use • Patented tiltable filter housing for easy disposal of collected material | Price including packaging (wooden crate) | plus shipping costs Bedpjw Avl Usfx Abzslp

Condition: used, Year of construction: 2014, filter area: 150 m², suction capacity: 15,000 m³/h, The WELDEX FT series of filtration towers has been specially designed for the efficient removal of welding fumes in production facilities. These units are primarily intended for extracting contaminated air during the welding of large or complex metal parts, where conventional fume extraction directly at the source is impractical. Fine particles are captured by M-class filter cartridges, and the filters are automatically cleaned during operation using a pulse jet of compressed air (pulse cleaning). The WELDEX FT filtration tower is positioned at the center of the workspace. Fume-laden ambient air is drawn in at the top of the unit from the surrounding area, filtered, and then returned to the hall draught-free through two side outlets. The three-section dust collection drawer gathers separated contaminants from both the pre-separator chamber and the filter compartment. Welding fume extraction for production halls (workplace ventilation systems) Ideal for all work areas where selective extraction is impractical: - Metal industry - Mechanical engineering - Automotive industry - Vehicle manufacturing - Aircraft construction - Shipbuilding - and many more High-performance welding fume extraction for manufacturing plants No need for ductwork installation Easy to install – ready for immediate use Durable, cleanable filter cartridges = low operating costs Efficient fume extraction using thermal lift from the welding process Compact design = minimal space required Flexible application = can be relocated at any time Brand: ESTA Model: WELDEX FT-150 Specifications: Motor power: 11 kW Capacity: up to 15,000 m3/h Vacuum: 2,000 Pa Bodpfx Aboxg Ickszslp Filter surface area: 150 m2 Weight: 1,400 kg Year of manufacture: 2014 Dimensions: Width: 2.10 m x 1.40 m Height: 3.65 m Stock no.: 1031

Condition: as good as new (ex-display), Year of construction: 2025, Exhibition piece - new Sold at a special price Technical data 300-P intake manifold: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2280 Pa filter surface: 30 m² Spa collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Blodpfx Aocdrzdobzop Weight: 880 kg Location: ex stock Bitburg Subject to prior sale

Condition: used, Used machine Bledpfxsxllw Ns Abzjp Data to follow

Condition: used, Year of construction: 1997, Suction nozzle diameter: 160 mm Maximum volumetric flow rate: 1770 m³/h Rated volumetric flow rate: 1448 m³/h Airflow monitoring: differential pressure indicator Bodoxgn Rhjpfx Abzelp Vacuum: 1570 Pa Filter area: 10.5 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: Chip sack volume: Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Machine width: 700 mm Machine height: 2200 mm Weight:

Condition: ready for operation (used), functionality: fully functional, filter area: 2.2 m², volume flow: 3,000 m³/h, Sawdust extractor 1 bag Alfa Rimini Bljdpfx Abjvuhqnozep Specification: • condition - used • manufacturer - Alfa Rimini • model - Alfa 1 • turbine engine power - 1.5 kW (single-phase, 220V) • turbine inlet - fi 160 mm • collection bag diameter - 1 x fi 500 mm • 1 filter bag with dimensions - 500 x 1250 mm (2.2 m2) • efficiency - 3,000 m3/h • year of manufacture - 2000 • dimensions 110 x 720 x 260 cm (length x width x height) Additional information: • very good, factory technical and visual condition • the photos show the actual condition of the item for sale • possibility of switching on and checking the device on site

Condition: good (used), Motor : 1.5 kW Bsdpfx Aohc Sypjbzjlp Quantity : 2 pieces Price/ piece

Condition: used, volume flow: 7,500 m³/h, Oil mist extractor for CNC machines, Donaldson Torit brand filter separator. The unit is designed for filtration of oil mist (emulsions as well as pure oil), vapors and fumes generated by various metal cutting processes. Filtration efficiency reaches 99.97% Model: DMC-D2 Fan power: 7.5 kW Capacity: 7,500 m3/h Filtration area: 40.8 m2 Filter cartridges in very good condition. Bedexd Ry Hjpfx Abzslp Stock no.: 1043

Condition: as good as new (ex-display), Year of construction: 2025, Al-Ko clean air deduster Exhibit Sold at a special price Technical data Power Unit 250 P Intake manifold: 250 mm Nominal motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22,4 m² Spa collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Warehouse 54634 Bitburg Bljdpfx Abecdr Enszsp Subject to prior sale

Condition: good (used), type of input current: AC, overall weight: 85 kg, input voltage: 220 V, suction capacity: 1,050 m³/h, input frequency: 50 Hz, Nedermann 641 Mobile welding fume extractor Bledpfovmr D Ajx Abzsp filtration capacity: 1050m3/h articulated extraction arm arm length 220cm voltage. 220v 50hz 900watt Airflow in the arm: 750 - 1050 m3 Weight: 73 kg Arm diameter: 160 mm Noise level: 73 dB(A) Filtration efficiency: Main filter>99 % -HEPA filter >99.97 % DOP 0.3 mm Filter area: main filter 35 m2 - HEPA filter 7.5 m2

Condition: used, Year of construction: 2013, Technical details: weight of the machine approx.: 300 kg electrics - voltage/frequency: 400 / 50 bei 3~ V/Hz power consumption: 750 Watt dimensions L x W x H: 1,5 x 0,8 x 2,6 m Mobile compact filter unit with extraction arm. (Welding fume extraction and fume filtration). Range of application: MIG/MAG solid wire; various fume and dust applications. incl. extraction nozzle manufacturer Lincoln, type LFA 4.1 CPL BJ 2013; tube Ø 200mm; suction Ø 280mm; total length=3900mm; the head is equipped with illumination via light switch, manual rotary head for locking flap, on/off switch gas temperature 40°C / 100°F Suction capacity approx. 2000m³ mobile over 4 wheels, front braked Blodpfx Aou Nv Afobzjp *

Condition: excellent (used), Year of construction: 2013, Technical data: ALKO clean air mobile extraction unit, Type: Mobil-Power Unit APU 120, Motor power: 1.5 kW, Bodpfew Aprzex Abzelp Suction nozzle Ø=120 mm, Soundproofed, mobile separator container 135 l, manual filter cleaning, Dimensions: L=1,085 mm, W=650 mm, H=1,985 mm, Dust container volume: 135 liters, Weight: 117 kg, Nominal air volume (after cleaning): 814 m³/h, Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1998, Technical details: total power requirement: 3,3 kw volume capacity: k.A. m³/h rated current: 14 - 15 / 8 - 8,5 A filter: Größe ca. B:660xT:1000xH:1060mm mm motor capacity: 3,3 kW weight of the machine approx.: 600 kg dimensions L x W x H: 1,45 x 0,8 x 2,0 m Bljdevdczaspfx Abzjp Dry separator with fan is sold as is. Built-in sheet steel construction Filter surface VARIO T 1.5 f=50 Hz Filter: 6 filter elements; dust extraction via container Ø 300 x H: 380mm Fan: Intake opening Ø 250 m; connected load 380V Exhaust air opening via ceiling External operation (was integrated in a laser cutting system Trumpf) *

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 200 P - Intake nozzle Ø: 200 mm - nominal motor power: 2,9 kW; 400 V/50 Hz - max. volume flow: 3010 m³/h - nominal volume flow: 2262 m³/h - negative pressure: 2174 Pa - filter surface: 13,7 m² - filter cleaning: Compressed air cleaning - 2 pcs. filling container (roll container): a. 241 litres - Dimensions ( L x W x H ): 2322 x 830 x 2050 - weight: 320 kg - Execution / operating side alternatively right / left Location ex stock Bitburg Top price for the exhibition piece Blodpfsbpg Ncsx Abzep

Condition: used, Year of construction: 1990, Technical details: total power requirement: 1,5 kw weight of the machine approx.: 110 kg electrics - voltage/frequency: 380 / 50Hz V/Hz dimensions L x W x H: 1,0 x 0,55 x 2,4 m Application: for welding and dust air with filtration Air inlet: pipe connection Ø 150 x 60mm; intake flexible pipe 2-sectioned Blsdpfx Abeu Nv Dpezep Exhaust air: flexible hose Ø 150mm to approx. 5 meters Operation via on/off switch *

Condition: as good as new (ex-display), Year of construction: 2025, Basically new machine, has run with us at the in-house exhibition ( 3 days ) 5 operating hours Technical data 300-P Suction port: 300 mm Nominal motor power: 7,5 kW / 3 Ph Bodobqachspfx Abzolp voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2 280 Pa filter surface: 30 m² Spa collection volume: 3 x 165 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: Ex stock 54634 Bitburg Immediately available subject to prior sale

Condition: used, Year of construction: 1988, Technical details: intake capacity: 1200 m³/h aspiration hole diameter: 230 mm total power requirement: 1,1 kW weight of the machine ca.: 110 kg dimensions of the machine ca.: 1,2x0,7x2,0 m mobile compact filtering device with suction arm length = 2800mm ( suction diameter 230mm) (tube dia160mm). 3 chamber fitering system application: smoke-and dust, such as welding smoke and skome filtration Bsdpju Nwitefx Abzelp test run has been proceeded succesfully *

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 160 P : - Intake port Ø: 160 mm - nominal motor power: 2,2 kW; 400 V/50 Hz - max. volume flow: 2000 m³/h - nominal volume flow: 1448 m³/h - negative pressure: 2503 Pa - filter surface: 9 m² - filter cleaning: Compressed air cleaning - Filling container (roll container): 241 litres - Dimensions ( L x W x H ): 1684 x 830 x 2050 - Weight: 288 kg - execution / operating side alternatively right / left Location: ex stock 54634 Bitburg Bedpebpg Itofx Abzjlp Top price for the show piece