Used Spindle Milling Machine for sale (65,502)

Year of construction: 2003, condition: good (used), functionality: fully functional, number of axes: 5, DS Technologie Scharmann ECOSPEED 2600/7800 5-axis high-performance machining center The machine was specifically designed for the highly dynamic machining of large-format aluminum structural components and operates with the parallel kinematic Sprint-Z3 machining head. The machine concept combines two conventional linear axes with the three-axis parallel kinematic head to enable simultaneous 5-axis machining. Manufacturer: DS Technologie Werkzeugmaschinenbau GmbH Product line: Scharmann Machine type: ECOSPEED 2600/7800 Year of manufacture: 2003 Axes: 5 Machining head: Sprint Z3 Machining head kinematics: Parallel kinematics Motor spindle: 75 kW Spindle torque: 72 Nm Maximum spindle speed: 24,000 rpm Tool holder: HSK-A63 Maximum tool weight: 10 kg Maximum bending moment of tool: 350 Nm Tool balancing quality: G 6.3 Tool clamping: Hydraulic Hydraulic pressure for tool clamping: 120 bar Volume flow for tool clamping: 6.6 l/min Power of hydraulic unit for tool clamping: 1.5 kW Typical application: Structural components for the aerospace industry Mains connection: 3 AC 400 V Rjdpjzwhunefx Anyocf Mains frequency: 50 Hz Nominal current main machine: 500 A Control system: Siemens SINUMERIK 840 D Tool magazine: Automatic tool magazine Tool change: Automatic Workpiece handling: Integrated large-format workpiece and transport system Machine design: Fully enclosed large machine Chip removal: Integrated Hydraulic unit: Knoll Hydraulik Systeme Operation: Stationary Siemens control panel with additional handheld device The Sprint-Z3 head has three parallel linear drives and enables translational and two rotational movements via the coupled movement of the parallel mechanism. Together with the two linear axes of the machine, the 5-axis kinematics of the ECOSPEED are created. We will be happy to provide further information, videos or drawings upon request.

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). Rjdpfjywtxbox Anyecf The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: refurbished (used), Year of construction: 2005, operating hours: 80,000 h, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,600 mm, position of the milling head: Orthogonal, spindle speed (max.): 2,200 rpm, spindle speed (min.): 22 rpm, rotational speed (max.): 2,200 rpm, rotational speed (min.): 22 rpm, year of last overhaul: 2026, spindle motor power: 40 W, Equipment: documentation/manual, rotational speed infinitely variable, Used SHW UF 6L – Universal Milling and Drilling Center Year of manufacture: 2005 Machine no.: XXXX Partially overhauled in 2026 High-performance SHW universal milling center with a large working area, automatic universal milling head, Heidenhain iTNC 530, and extensive equipment. Technical main data Travel ranges X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,600 mm Automatic universal milling head CNC-controlled, swivels in two planes Milling head mount: 360 × 1° Milling head: 180 × 1° A total of 64,800 programmable head positions Tool mount: SK 50 / DIN 69871 Hydromechanical tool clamping Oriented spindle holder 360 × 1° Main spindle Drive power: 40 kW at 100% ED Max. power: 56 kW at 40% ED 2-stage gearbox Speed range: 22–3,200 min⁻¹ Feeds X-axis: up to 20,000 mm/min Y/Z-axis: up to 24,000 mm/min Digital AC feed drives Direct linear measuring systems CNC control HEIDENHAIN iTNC 530 External electronic handwheel HR 420 Second control panel in front of the machine Equipment Electro-mechanical leveling system for the spindle stock Traveling work platform with CNC control panel Pick-up tool station for 10 tools Max. tool weight: 25 kg Max. tool length: 400 mm Wireless measuring probe, 3-dimensional 1-channel collision monitoring Internal and external coolant supply Coolant pressure up to 16 bar / approx. 32 l/min Coolant/air switching Paper band filter system Coolant tank approx. 800 l Oil cooler for the spindle stock Hinged belt chip conveyor Impulse central lubrication system Traveling control cabinet Fixtures incl. foundation anchor bolts Connection data Rcsdpfx Aneztqyleyef 400 V / 3 phases / 50 Hz Connection power approx. 80 kVA Fuses 160 A Compressed air 4–6 bar Robust SHW universal milling center with an 8,000 mm X-axis travel, a powerful 40 kW main drive, and an automatic universal milling head – suitable for the flexible machining of large and complex workpieces. Accessories such as a dividing head table and rotary table available upon request. Automatic tool changer (ATC) available upon request. Images are sample images.

Year of construction: 2011, condition: excellent (used), functionality: fully functional, machine/vehicle number: C111707, Reconditioned Production Ready！ Ref No: 1026 Emmegi Comet T5 Work centre CNC with 3 controlled axes, used for the working of bars or aluminium, PVC, light alloys in general and steel pieces. It has two functioning methods: only one work area for bars up to 7.7 m long or two independent work areas with piece load/unload while machine is working. It has an 8 place tools storage on board the X axis slide, able to host 2 angular units and one milling disc, to perform work on the 5 sides of the piece. It also has a mobile work surface that facilitates the piece Rjdpfx Aozlat Senyocf loading/unloading operation and significantly increases the workable section.

Condition: used, Technical details: spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1600 mm z-travel: 2000 mm Rcsdpfxou Idp Ds Anyjf control for program: TNC Heidenhain 360 B-axis (table): ja W-axis (spindle longitudinal): Planschieber mm tool taper: ISO 50 table-size: 1400 x 1250 mm machine dimensions LxWxH: 8,0 x 6,0 x 4,5 m weight of the machine ca.: 28 t with face slide 700mm , electronic hand control *

Condition: used, Deckel FP1 milling machine Rsdpfxozv Sm Sj Anyecf Location: Bad Tölz Inspection is welcome. We have other used machines available. Please contact us.

Condition: not inspected (used), functionality: unexamined, Universal tool milling machine Rodozvyihepfx Anyscf

Condition: used, functionality: fully functional, For sale is a Deckel Maho MH 600 CNC milling machine with a Philips/Grundig CNC 532 control system. The machine comes from our own machinery stock and can be inspected on-site by appointment. This is a robust CNC milling machine from Deckel Maho with an enclosed work area and a large T-slot clamping table. Technical data / features: * Manufacturer: Deckel Maho * Model: MH 600 * CNC milling machine / machining center * Control system: Philips/Grundig CNC 532 * 3 CNC axes * Travel range X: approx. 600 mm * Travel range Y: approx. 450 mm * Travel range Z: approx. 450 mm * Tool holder: SK40 * Coolant system * Enclosed work area * T-slot clamping table Important regarding the features: * No automatic tool changer * No chip conveyor Redpfx Ajzwv Aaonyecf * Tool changes are performed manually The Hilma machine vises shown in the photos are not included in the price. The machine is particularly suitable for single-part production, toolmaking, repair work, as well as small and medium-sized series. An inspection and demonstration can be arranged by appointment. Additional photos and information are available upon request. The stated selling price is NET, plus 20% VAT. VAT can be shown separately. Subject to prior sale and errors.

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Redpfxjwid Spo Anyocf Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: used, Year of construction: 1984, CNC Milling Machine Heckler & Koch BA 20 CNC Manufacturer: Heckler & Koch (Germany) Type: Vertical CNC Machining Center (Milling Machine) Control system: Depending on the version – Siemens, Heidenhain, or proprietary HK system (the photos show a panel with a monitor and traditional keyboard, most likely Heidenhain or Siemens Sinumerik control). Worktable: typically 2000 × 500 mm (designation BA 20 = 2000 mm table length) Working travels (X/Y/Z axes): X: approx. 2000 mm Y: approx. 500 mm Z: approx. 500–600 mm Spindle power: usually 10–15 kW Spindle speed: up to approx. 6000 rpm (depending on the version) Tool holder: SK40 or SK50 (SK40 holders visible in the photos) Tool magazine: usually 16–20 tools Cooling: via external coolant nozzle (flexible blue pipe visible in the photos) Total weight: approx. 6–8 tons Power supply: 400 V, 50 Hz, connected load approx. 20–25 kVA Applications: Rodpfjw Uac Hox Anyecf - Production of medium-sized metal parts - Defense, machinery, and automotive industries - Suitable for batch and single-piece production Equipment: control panel, keyboard, mouse, vices, guards 📌 Applications: - Metalworking - Batch and single-piece production - Metalworking shops, manufacturing plants

Condition: good (used), Year of construction: 1989, Universal milling machine Type: LMV Machine No.: 5012 Year of manufacture: 1989 Technical data: Travel distances: longitudinal X-axis 762 mm transverse Y-axis 305 mm vertical Z-axis 406 mm Quill travel 127 mm Spindle mount collet Table size 1067 x 229 mm Speed range 50-3750 rpm in two stages Weight: 1000 kg Equipment:  SONY digital measuring system, 2 axes, X and Y axes  Machine light  Drill chuck 0-13 mm  Collet chuck  Machine vise, jaw width 150 mm  Protective device, electrically protected, type: ZE-FS 30-300, fully assembled  Documentation Condition: good, workshop inspected Rcodpfx Ajw Ebhmonysf

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Rsdpfor Hr Arex Anyocf Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 180 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,400 rpm, spindle speed (min.): 20 rpm, For sale: Aciera F4 milling machine – ISO 30 – very complete with many accessories For sale: an Aciera F4 universal milling machine, equipped with an ISO 30 tool holder and featuring a very extensive range of accessories. The Aciera F4 is a high-quality Swiss precision milling machine, known for its robust construction, accuracy and versatility. This type of machine is very popular with toolmakers, precision workshops and enthusiasts of classic quality machines. Thanks to its universal design, the F4 is suitable for a large number of milling, drilling and precision machining operations. Technical specifications: • Brand: Aciera • Type: F4 • Design: Universal milling machine • Spindle taper: ISO 30 • X-axis travel: 400 mm • Y-axis travel: 180 mm • Z-axis travel: 400 mm • Solid and precise Swiss construction Redpfx Anszxgyfeyecf • Suitable for both horizontal and vertical milling, depending on the head and accessories used • Highly versatile Very extensive accessories The machine comes with a very large number of accessories, including various ISO 30 tool holders and other original and matching accessories. Including: • Dividing head • Various dividing plates • Rotary table • Machine vise • Various ISO 30 milling chucks • Various collet chucks and collets • Milling arbors and holders • Various milling cutters and cutting tools • Clamping tools • Drawbars • Clamping devices • Parallel blocks and clamping materials • Various original and matching machine attachments • And much more The large number of accessories makes this a particularly complete machine that can be used immediately in a wide range of applications. The extensive collection of holders, collets, dividing equipment and clamping tools alone represents a significant value. The Aciera F4 is not a light hobby milling machine, but a real precision and toolmaking machine. With a working area of 400 mm in X, 180 mm in Y and 400 mm in Z, the ISO 30 taper and the extensive accessories, this is a particularly versatile machine. A great opportunity to purchase a very complete Aciera F4 with ISO 30 taper and an exceptionally large number of accessories. Condition: used Location: Emmeloord Asking price: € 6,850 VAT: excluding VAT Inspection and demonstration are possible by appointment. If you are seriously interested or would like more information about the machine and the available accessories, please contact us.

Condition: excellent (used), functionality: fully functional, Catalogue number 7364 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - working table (L/W): 410x1000 mm - motor: 11 kW - 2 pneumatic material clamps - extraction port diameter: 160 mm - dimensions (L/W/H): 1070x1260x1400 mm - weight: 650 kg ADVANTAGES – Made in Germany – Additional set of cutters + copy template – Not repainted – Used milling machine, in very good condition Net price: 33,900 PLN Rsdpfjztaq Tsx Anyecf Net price: 8,070 EUR according to 4.2 exchange rate (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, spindle speed (max.): 3,150 rpm, table width: 630 mm, table load: 3,000 kg, table length: 1,700 mm, mount diameter: 50 mm, total height: 2,300 mm, total width: 2,300 mm, total length: 4,700 mm, rotational speed (max.): 3,150 rpm, overall weight: 6,000 kg, 2013 Overhauled by REIDEN SWISS New regrinded New iTNC530 New Hr410 Handwheel New CE-Safety  New Milling head gears and bearing New LS186C Glas scales New Blum TC60 3D taster Geomtrical DIN 8615 ! Overhauling cost CHF 250k Rjdjzvfiaepfx Anyjcf X-Axis: 1300mm Y-Axis: 630mm Z-Axis: 630mm Table Length: 1700mm Table Width: 630mm Table load: 3000 Power on spindle:16kW Spindle speeds: 3150Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Length: 4700mm Width: 2300mm Height: 2300mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2014, Siemens 840 D Swivelling control panel including SIEMENS 840 D Solution Line control system. Travel X axis: 8000 mm Travel Y axis: 1300 mm Travel Z axis: 2200 mm Tool system: SK 50; Capto C8 Main spindle: 20–4000 RPM 3D volume model of the machine HEIDENHAIN measurement system on all axes. Automatic central lubrication with pressure and time monitoring for all axes and moving components. Measuring probe system RENISHAW RMP60 M Tool breakage detection via probe BRANKAMP CMS collision monitoring with two measuring channels: Center height, Fibro rotary clamp: 1100 mm Center width, Fibro rotary clamp: 900–3000 mm Max. swing diameter, Fibro rotary clamp: 2200 mm Fibro rotary table D=1600; 250 RPM Carousel rotary table FIBRODYN 1600 mm: Table surface 6000x2000 mm d’Andrea facing slide Universal milling head Rcodpow Syv Uofx Anyof Automatic tool changer ATC, 80 tool magazine slots in M version: 3 milling head slots High-pressure pump 30 bar Operating hours: 4261 h

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Rcjdpfx Asyi A Tdsnyof

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1205-H740-00, overall weight: 6,000 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 50 mm, controller model: ANDRONIC 2060, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period, between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Travel range, X-axis: 500 mm Travel range, Y-axis: 100 mm Travel range, Z-axis: 50 mm Travel range, Z-axis: ±50 mm, relative to the central axis of the rotary indexing table / 200 mm Travel speed, X-axis: max. 30 m/min Travel speed, Y-axis: max. 20 m/min Travel speed, Z-axis: max. 30 m/min Acceleration, X/Y/Z-axis: 10 m/s² MACHINE DETAILS Control model: ANDRONIC 2060 Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,650 x 2,700 mm Total weight: 6,000 kg Operating voltage: 230/400 V Frequency: 50 Hz Rated apparent power: 12 kVA Swivel radius, control panel: approx. 1,050 mm Rjdpfozu Iwwsx Anyocf

Condition: like new (used), Year of construction: 2021, functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 240 mm, spindle speed (max.): 22,000 rpm, spindle mount: MK 0, rotational speed (max.): 22,000 rpm, Equipment: documentation/manual, Nudimo ovu kao novu CNC glodalicu Isel ICV 4030EC, godina proizvodnje 2021. korištenu za izradu klišeja. proizvođač: isel Ioc Tjy I Dp Sst Hqi Rjif model: ICV 4030EC godina izgradnje: 2021 stanje: kao novo Radna površina: 300x240 mm Servo motori, spindla 1200 W do 22.000 okretaja, tool changer za 4 alata SK16, integrirano računalo, RemoteNC software. Kompaktan, brz, precizan i tih stroj. Rcsdpfxjy I Dp So Anysf Ako imate dodatnih pitanja ili trebate više informacija, slobodno nam pošaljite poruku ili nas nazovite.

Condition: used, Year of construction: 2023, functionality: fully functional, overall weight: 340 kg, Forklift spreader / pallet truck spreader – adjustable Redpfx Anezwb Eyeyecf Robust forklift spreader for the safe transport and lifting of loads using a forklift. The spreader is attached directly to the forklift forks and features two load hooks that are adjustable in width. Technical features: Load capacity: 3 tons Adjustable load hooks for flexible load handling Two load hooks according to DIN 15401 Optimized dead weight Available in aluminum or stainless steel upon request Standard paint color: signal yellow RAL 1003 The forklift spreader complies with the requirements of the German Ordinance on Occupational Safety and Health (BetrSichV) and the EC Machinery Directive. Normal signs of wear and tear - negotiable price.

Condition: good (used), Year of construction: 2008, MAZAK HCN 5000 – Year 2008 * Horizontal CNC Machining Center * Year: 2008 * CNC Control: MAZATROL * Pallet size: 500 × 500 mm * 4-axis machining * Automatic Pallet Changer (APC) * Automatic Tool Changer (ATC) * High-performance spindle * Powerful and robust machine design * Suitable for heavy-duty machining * High precision and productivity * Ideal for single parts and series production * Suitable for steel, stainless steel and non-ferrous materials Rodpfozxbd Esx Anyocf

Condition: used, Year of construction: 2012, - Work area: X: 9000 mm / Y: 2700 mm - Gantry 1: 5-axis milling spindle 20/26 kW - 32-position tool changer - Gantry 2: 2x13 spindle drilling unit Technical data - Heavy-duty gantry system with 2 gantries - Gantries with drives on both sides (gantry drive) - CNC control SIEMENS 840D sl / PCU 50 with NCU 730 - Operator panel OP 15 with 15" display, mounted on a guide rail along the longitudinal axis Work area / machinable cube size with tool length/diameter of 160 mm - X-axis: 9000 mm with both gantries - Y-axis: 2700 mm - Z-axis: (Standard cube size 420 mm) - Customer-specific design for workpiece thicknesses up to 60 mm - 5-axis head Equipment, Gantry 1 - 1 universal head for 5-axis milling Rjdpezuw Ixsfx Anyocf - Milling spindle power: 20/26 kW (S1/S6) - Speed adjustable up to 24,000 rpm - Water-cooled - Tool interface HSK F63 for automatic tool changes - Thread cutting is possible! - 1 chain-type tool magazine with 32 positions - With rotary gripper for fast tool changes - Magazine fixed on the operator side Equipment, Gantry 2 - 2 head mounting brackets - Equipped with 2 heavy-duty multi-spindle drilling units each - With common dust extraction hood - Each drilling unit with 13 drilling spindles (total of 26 drilling spindles) - Individually selectable vertically - Arrangement in an L-shape - 2 angled drilling spindles adjustable from 0 - 25° - 1 right, 1 left, each approx. 2.2 kW, n= 2800 rpm - Drill chuck collet Rego Fix ER 25 M Machine table - Base frame with linear guide - 12 table traverses on a linear guide for positioning in the X-direction, individually driven and positionable via NC drives - Vacuum supply integrated into the table traverse - Each traverse is individually vacuum-monitored and linked to the machine control system Workpiece infeed function - 1 belt conveyor consisting of 4 belt strands - Width 40 mm, each traverse with lifting devices - Lifting device NC-controlled - Stroke 110 mm (+10 mm, -100 mm) - The machine should be installed in a foundation pit of approx. 300 mm - Vacuum pump Bush type: Mink MM 1322 - Suction capacity 250 m³/h - With intermediate tank 500 l for rapid vacuum generation - 2 chip transport belts under the machining area for the removal of chips and/or small swarf up to a size of max. 100 x 100 x 100 mm - Automatic central lubrication Work safety - Moving protective cabin on both gantries - Protective cabin with safety bumpers and safety light curtain system on the operator and rear sides (due to automatic table adjustment)

Condition: used, Year of construction: 1990, Fixed Bed Milling Machine CORREA A25/25 Travel X: 2500 mm Travel Y: 1200 mm Travel Z: 1000 mm CNC HEIDENHAIN TNC 355 Spindle: SA 50 Spindle motor: 30 CV Spindle speed: from 2 to 3000 RPM Table size: 3000 x 1000 mm Year of construction: 1990 Redpezw A Enofx Anyecf Maxi eligible load on table: 7 T Manual Swivel Head Voltage: 380 V Dimensions (L x W x H): 5000 x 3000 x 3000 mm Weight: 16,5 T

Condition: used, Universal Milling Machine DUFOUR type F250 Rcodpszw A Dqefx Anyof Travel X: 1000 mm Travel Y: 450 mm Travel Z: 600 mm Spindle SA 40 Table size: Length 1400 mm x Width 400 mm Horizontally + vertically swivel head Spindle speed: from 24 to 1500 RPM Scale 3 axes MITUTOYO Horizontally + Vertically spindle Rapid X - Y - Z Lubricant pump Centralized lubrication pump Voltage: 380 V Width: 2000 mm Depth: 2400 mm Total height: 2200 mm Weight: approx 3,5 T

Condition: good (used), Year of construction: 1986, 3 units in stock Rjdpfsich Dvsx Anyocf Universal milling machine Manufacturer: KUNZMANN, Type: UF 6 / 3, Year of manufacture: 1986, with Heidenhain digital display Spindle mount: ISO 40, horizontal and vertical Spindle speeds: 50 - 2150 rpm Feed rates, stepless: 0-1000 mm/min, stepped X / Y and Z 0-250 mm/min Rapid traverse: 2000 mm/min X / Y and Z 500 mm/min Table surface: 860 mm x 265 mm, swivel range: +45 to -45 degrees Machine documentation available. Good condition, ready for demonstration. Price per unit: €4,850 net, ex works, free on board (FOB) at warehouse.