Used Spindle for sale (12,372)

Condition: new, Year of construction: 2025, Martin T 27 Flex tilting spindle moulder - can be tilted on both sides - Flexibility for today and tomorrow. Setting up a tilting spindle moulder is normally a major challenge. Not on the T27 Flex with its modern touchscreen control: thanks to the integrated tool offset, you can set up even complex milling patterns with a tilted spindle in no time at all. Only in this way can the large swivel range of 2 x 46° be used efficiently - and you can fully follow your inclinations. In addition, the machine can be tailored precisely to the individual requirements of your business. Equipment: T 27 Flex T 2711-a Digital display of infeed jaw position in the control unit T 2731-a Table extension on both sides + extendable workpiece support T 2740-a Centrex protection T 2742-a Integral fence incl. filling rod T 2790-La Console for feed stand attachment left Bodpfx Ador Hr D Nedolr The photo only shows an example machine / feed is not included Location: Comes to stock 54634 Bitburg - available in two weeks -

Condition: good (used), Year of construction: 1972, LZ Lathe Manufacturer: HEIDENREICH & HERBECK Type: 21RO Year: 1972 with Parat quick-change toolholder, 10 pieces, machine documentation, thread dial indicator, live center, 250 mm Forkardt chuck. Swing over bed: 430 mm Swing over cross slide: 255 mm Center distance: 1000 mm Turning length: 750 mm Spindle speeds: 19-2000 rpm, 5.5 kW motor Bledet Ipi Ijpfx Addjr Spindle bore: 56 mm Further technical data available in the data sheet Required space: Length 2900 mm, Width 1100 mm, Height 1300 mm, Weight approx. 1750 kg Machine documentation available. Coolant system installed, chip guard/rear panel. The machine is in good condition and can be demonstrated under power.

Condition: used, Year of construction: 1994, turning diameter over cross slide: 200 mm, turning diameter over bed slide: 410 mm, turning length: 950 mm, metric thread diameter (max.): 140 mm, bed width: 330 mm, overall weight: 2,100 kg, Voest Lathe Model: E 35 / S3 For chuck and shaft machining, equipped with variable drives and cycle automation Spindle nose: DIN 55027/6 Spindle diameter at front bearing: 90 mm Blsdsx Aqrajpfx Adder Operating voltage: 380 V / 50 Hz Chip guard wall with comprehensive, movable splash guard hood Chuck guard with safety interlock end switch Machine light Multifix quick-change toolpost, size B Coolant system Operating key(s) Tailstock taper: MT 4 Spindle bore: 54 mm Main spindle internal taper: MT 6 Metric threads: 0.5 – 140 mm Inch threads: 1/4 – 56 TPI / 1" Module threads: 0.125 – 28 DP threads: 1 – 224 Number of thread leads: max. 50 AC drive with 2-speed gearbox Motor power S1/S6: 9.0 / 7.5 kW Total speed range (2 steps): 1 – 3000 rpm Max. spindle torque: 700 Nm Three-phase servo drive Longitudinal feed force: 6.0 kN Cross feed force: 3.0 kN Feed range longitudinal/cross: 0 – 10 mm/rev Rapid traverse longitudinal/cross: 7 / 3.5 m/min

Year of construction: 1999, condition: ready for operation (used), A CNC multi-spindle lathe Schütte is available. Number of spindles: 6, cross slides: 2, bar length: 3000mm, max. bar diameter: 20mm, max. square material side size: 14mm, max. hexagonal material side size: 17mm, max. turning length: 40mm, speed: 5000rpm. Machine dimensions X/Y/Z: approx. 3150mm/1050mm/2000mm, weight: approx. 4000kg. Including loading magazine, all collets and accessories. Documentation available. An on-site inspection is possible. Blodpox Aup Njfx Addor

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, turning diameter over cross slide: 190 mm, spindle bore: 56 mm, turning length: 1,000 mm, For sale: used Weiler Commodor lathe, year of manufacture approx. 1990. Turning length: 1000mm. Swing over bed: 380mm. Swing over cross slide: 190mm. Spindle bore: 56mm. Spindle speed: 25–2000 rpm. Tailstock: MK4. Equipment: 2-axis digital readout by Heidenhain, 200mm three-jaw chuck, Multifix including 1 toolholder, coolant system, longitudinal and cross feeds, machine feet, various chuck keys, bed stop, live centres, complete documentation. Bodpfxexzu Ips Addelr

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, Control: Siemens 828 D General Speed: 3,000 rpm Power: 9 kW Torque: 140 Nm Chuck diameter: 210 mm (max. 260 mm) Spindle bore: 65 mm Spindle nose: A2-6'' Bsdpfjx Ahdtex Addelr Working area Distance between centers: 1,000 mm Center height: 215 mm Swing over bed: 430 mm Swing over slide: 200 mm Travel Z-axis: 1,065 mm Travel X-axis: 220 mm Tooling system Turret: PARAT 4-position turret head RD 2 Tailstock Technology: dragged Centre point: MT-4 (live) Equipment Chip management: chip tray Coolant supply: coolant pump 5 bar Jaw set: 1 set of hardened jaws

Condition: ready for operation (used), Year of construction: 2025, Main Drive Blodpfxexwzzuj Adder Number of axis 3 This 3-axis QUICK CNC KQ-63E was manufactured in 2025. It's a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information. Application Types Boring & Drilling (Wood)

Condition: good (used), Year of construction: 2010, LZ-Lathe Fabr.JET Type :GHB-1330 Bj.2010 with 3 ash digital indicator, 3 jaws lathe chuck DM 160 mm tool holder Multifix size A, 2 steady rests coolant device. Turning diameter overbed: 330 mm Turning diameter over face: 197 mm Center width: 750 mm Spindle speeds: 70-2000 rpm spindle bore : 38 mm Machine in good condition from the training workshop Machine documentation available . Bjdpfoqwgzqex Addjlr

Condition: used, Year of construction: 2015, Worktable: 1945 x 575 mm Max. spindle projection above table: 130 mm Usable spindle length: 100 mm Max. tool diameter (lowerable): 180 mm Spindle arbor diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Motor power: 5 kW Weight: approx. 240 kg Extraction diameter: 2x 120 mm Storage location: Supplier Bodjxn Al Nopfx Addjlr

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor Automatic lubrication system. Electric digital display memory system. Blsdpfsxyik Ajx Addjr Possible to supply with Weinig moulder infeed and outfeed

Condition: ready for operation (used), empty load weight: 3,300 kg, additional equipment features: Diamant tools, + afzuiging + koelmelk groep Grindingwidth: 375 mm Longitudinal travel X-axis (autom.): 600 mm Bsdpjxp Skdofx Addolr Cross-travel Y-axis (autom.): 375 mm Travel Z-axis (autom.): 350 mm Dimensions magnetic table: 600 x 350 mm Max dia grindingstone: 300 x 50 x 76.2 mm Spindlespeeds: 2900 rpm Motorpower: 9 kW Tension needed: 400V Cooling system: yes

Condition: good (used), Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Bedow I A Uxopfx Addelr Speed: 40 – 3000 rpm Infinitely variable drive with 3 gearbox stages and digital speed display Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint: Reseda green RAL 6011 Digital display: Optional at extra cost Accessories: Further accessories available on request

Condition: good (used), Leadscrew & feed rod lathe WEILER CONDOR - Original paint - Centre height: 165 mm - Swing over bed: 330 mm - Swing over cross slide: 170 mm - Distance between centres: 800 mm - Spindle speeds: 24 - 2800 rpm - Automatic longitudinal/cross feeds - Spindle bore: 38 mm - Tailstock MT 3 - Collet chuck system + 17x collets - Three-jaw chuck - Multifix toolpost with inserts - Electric chuck guard - Chip guard rear panel - Work lamp - Various accessories Bodox A D Ubepfx Addslr - Documentation Dimensions: LxWxH 1.8x0.9x1.6 m / Weight 800 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1988, Lathe KMK 40 Speed 1800 rpm Turning length 1000 mm with 3 jaws 4 jaws Multix with 4 inserts Rotating center point Face plate Collet chuck with collet set Bodpfeu Uh U Ijx Addslr

Condition: used, Year of construction: 1993, Used machine Bedpfx Adexwz Rcsdelr Year of manufacture: 1993 Features and technical specifications: - Spindle clamping length: 180 mm - Spindle tilt: -10° to +45° - Motorized spindle stroke with fine adjustment - Motorized spindle tilt - Motor: 5.5 kW - Table size: 1200 x 730 mm - Largest table opening: 420 mm - Motor brake - Speeds: 3000/4500/6000/7000/10000 rpm - Speed display - Extraction port: 125 mm - With Aigner integral fence - With 3-roller power feed Availability: approx. mid/end of January 2026 Location: Hesse

Condition: used, Year of construction: 1990, functionality: fully functional, turning diameter over cross slide: 570 mm, turning diameter over bed slide: 340 mm, spindle speed (max.): 2,500 rpm, The machine operates fully. The machine bed is in excellent condition. Runs very quietly. Blsdpew E D Rqjfx Addjr

Condition: used, Year of construction: 1979, functionality: fully functional, turning diameter: 640 mm, center height: 320 mm, turning length: 2,000 mm, Leadscrew and feedshaft lathe VDF with digital readout, powered top slide, 3-axis feed with rapid traverse, 3-jaw chuck, faceplate, Multifix toolholder with 5 inserts. Bodpfx Aexz Edzeddolr

Condition: excellent (used), SCM MiniMax Formula1 8/24 milling machine Technical specifications: Spindle diameter: 40 mm Spindle height: 140 mm RPM: 3000/4500/6000/7000/10000 r/min Manual spindle height adjustment Spindle lock Work table dimensions: 730x1860 mm Dimensions of working table with carriage: 760x600 mm Culagi arms adjustable Bsdeuyg Tcjpfx Addjlr Power supply: 400 V Overall dimensions: Length: 3680 mm Width: 1200 mm Height: 1500 mm

Condition: used, Year of construction: 1999, functionality: fully functional, Weiler Primus VC lathe, year 1999, equipped with a 3-axis Siemens digital readout, 3-jaw chuck, Multifix toolpost, rear splash guard, and electric chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by appointment. Bedpfx Ajx Afvgeddolr

Condition: excellent (used), Catalogue number 7784 Blodpfxext I Adj Addsr TECHNICAL DATA - Spindle diameter: 30 mm - Working height of spindle: 150 mm - Interchangeable spindle - Spindle locking - Adjustable up/down + angle - Original cast iron fence with full adjustment - 4 spindle speeds + left/right: 3000/5000/6000/10000 rpm - Table dimensions: 1120x800 mm - Motor: 3.7 kW - Dimensions (L/W/H): 1100x1400x1160 mm - Weight: 775 kg ADVANTAGES – German-made – Used milling machine – Very good condition Net price: 6,900 PLN Net price: 1,640 EUR Net price calculated at a rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 1963, center height: 102 mm, turning length: 450 mm, Very good lathe for demanding hobbyists, motorcycle workshops, blacksmiths, and similar businesses. Runs perfectly. Power feed along the longitudinal axis. Thread cutting possible. 40–3000 rpm. 3 x 400 Volt, 16 A supply. Accessories are shown in the photos. An additional cross slide is included in the scope of delivery, but it does not fit this machine and is more suited for a Schaublin 102 turret lathe or a similar model. Bodsx Anulspfx Addolr Transport in a closed Euro trailer is possible.

Condition: excellent (used), Year of construction: 2013, operating hours: 1,719 h, functionality: fully functional, feed length X-axis: 470 mm, feed length Z-axis: 2,040 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, turning diameter over cross slide: 650 mm, turning diameter: 1,030 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, overall weight: 23,000 kg, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Blsdpfx Asxzgkioddsr Swarf Conveyor Coolant System

Condition: new, functionality: fully functional, Spindle unit MKK05-012-25-60-080-00340 Original packaging, from stock with documentation EMAG order number: 20399062 Bodpoxz Al Asfx Addelr

Condition: new, functionality: fully functional, Spindle unit MKK05-026-23-60-080-01024 Factory-sealed, from stock with documentation EMAG order number: 20596156 Bedpfx Aexz Ahdjddjlr

Condition: new, functionality: fully functional, Factory-sealed, from stock inventory. Original EMAG order number: 20567652 Bljdpexzzhvjfx Addsr