Used Spindle for sale (12,391)

Condition: used, Year of construction: 1966, Swivelling spindle: No Bdsdexu Dhlopfx Addjk Height adjustment: Handwheel Swivel adjustment: - Cutter jaw adjustment: manual Height display: Scale Swivel angle display: - Fence indicator: Scale Spindle diameter: 30 mm Speeds: 2800, 4500, 6000, 5600, 8000, 12000 rpm Motor power: 4 / 5.5 kW Motor brake: Manual Extraction connection: 2 x 120 mm Machine length: 2000 mm Machine depth: 900 mm Weight: 700 kg

Condition: excellent (used), Year of construction: 2004, We are offering an exceptionally high-quality precision lathe. Within its class, this is likely the best German lathe ever built. BOEHRINGER Precision Lathe Model DUE 500 Year of manufacture: 2004, including CE certification and central lubrication Machine No.: T1022.2027-00 Center height: 240 mm Swing diameter over bed: 500 mm Swing diameter over cross slide: 285 mm Center distance: approx. 1,200 mm Effective turning length: approx. 1,000 mm Bar capacity: 62 mm Spindle nose: DIN 55027 Size 6 Spindle bore: 100 mm Drive power: 11 kW Maximum torque: 2,000 Nm 24 spindle speeds: 11.2 – 2,240 rpm 60 cross feeds: 0.03 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Tailstock quill stroke: 190 mm Bdedpfx Ajw Rdthjddjk Tailstock taper: MK 5 Machine footprint (LxW): approx. 4,000 x 1,525 mm Weight: approx. 4,300 kg Accessories: - HEIDENHAIN 3-axis digital readout - Central lubrication system - Electrically interlocked chuck guard - Coolant system - Chip protection rear panel - Röhm chuck, T 250 mm, with various jaws - Telescopic cover for lead and feed screw, support to bed - Machine lamp - Multifix C + 4 quick-change tool holders - Live center - Operating manual - Circuit diagram - Rapid traverse in longitudinal and cross slides Condition: The machine is in very good technical and visual condition. Backlash on cross slide approx. 0.3 mm, on compound slide approx. 0.15 mm Spindle nose runout approx. 0.006 mm Bed geometry: deviation approx. 0.01 mm over approx. 750 mm bed length (measured on flat guideway towards chuck using dial indicator) The following parts have been renewed: - Oil change - New hoses for central lubrication - New wipers - Key for operating lever replaced - Locking pin for interlock replaced Price is net, ex stock, loaded free of charge. Delivery by company truck can be arranged at extra cost.

Condition: used, Robland NLX1700 panel saw and spindle moulder, very good condition, 2x3 kW, approx. 2000 mm cutting length, approx. 100 mm cutting height, 1700 mm sliding table length, approx. 450 kg Subject to price changes, errors, misprints and typographical mistakes excepted. Bdedpfxewzzh Es Addsk

Condition: excellent (used), Year of construction: 2022, Tilting spindle moulder with sliding table FELDER Model F 700 Z Sliding table length: 1000 mm Motor power: 5.5 kW Motor voltage: 3 x 400 V, 50 Hz Spindle tilting range: 90 - 45 degrees Spindle diameter: 30 mm Spindle speed: 3500/6500/8000/10000 rpm Table opening: 230 mm Extraction port diameter: 120/80 mm Bodpfxewu D A Es Addedk CE Note for used machines: • Errors in technical specifications and prior sale excepted. • Listed prices are ex-location – free loading! • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty. Buyers are welcome to inspect the machines at the location. • Special agreements only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: like new (used), Year of construction: 2024, – Distance between centers: 1000 mm Bdsdpfxexz Rg Ue Addek – Swing over bed: 358 mm – Swing over cross slide: 502 mm – Swing over support: 179 mm – Spindle bore: 52 mm – 30/2300 rpm – Infinitely variable speed – Digital speed display – Longitudinal and cross feed – Digital readout on two axes (2-axis DRO) – Brake – Cooling – Multifix with 4 tool holders – Lighting – Safety guard – Fixed steady rest – Travelling steady rest – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation – 400V

Condition: new, Year of construction: 2023, functionality: fully functional, NEW PLANT / READY FOR OPERATION / IMMEDIATELY AVAILABLE HT 45 SM2 / SIEMENS - with driven tools CNC lathe for the complete machining of turned and milled parts with 2 spindles, 2 tool systems, 5 linear axes and 2 rotary axes, integrated spindle motors on main and counter and counter spindle (water-cooled), preloaded roller guides. Drive power: Main spindle - 15 kW Counter spindle - 15 kW Speed range: Main spindle 0 - 7000min-1 Counter spindle 0 - 7000min-1 Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar capacity ø 45mm) Counter spindle: KK5 Includes: - Hollow clamping cylinder on the main spindle - Draw tube for main and counter spindle - Mechanical spindle brake (main/counter spindle) - Part ejector and flushing through the counter spindle - Control Sinumerik 840D-sl / OPERATE o emcoNNECT/APP-based user interface Bjdpfxelxqf No Addedk o 22" multi-touch display o IPC with 240 GB o SHOPTURN dialogue programming o USB interface o Network drive / Ethernet o 3D simulation o and much more - 2x 12-fold tool turret VDI 25 radial with directional logic for up to 2x 12 driven tool stations Swivel speed adjustable with feed switch! Performance data: -Max. 4kW at 2080 rpm -Torque constant 16 Nm -speed range 0-6000 rpm -C-axis for main and counter spindle -TRANSMIT software for simple C-axis programming - Chip conveyor with an ejection height of 1100mm programmable Type "hinged belt" ) - Coolant device integrated in the chip conveyor 2 pcs. High pressure pumps with 14 bar 2 pcs. flushing pumps with 3,7 bar Air gun with spiral hose - LED machine room light - Hydraulic power unit - Documentation

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Tilting Spindle Moulder MARTIN T25 Very good condition, the machine comes from a very small joinery workshop that was closed due to retirement. Everything works perfectly. All bearings and guides are in good condition. Year of manufacture: 1997. The fence on the moulder allows adjustment of the fence jaw depth, with fine adjustment and a mechanical counter; this makes it possible to perform trimming work, e.g. on a gluing profile. The entire fence can also be moved in depth using a handwheel and leadscrew, and a second mechanical counter allows for highly precise and quick settings. Equipped with spindle lock via lever. Chip extraction is excellent, with 2 extraction ports: 125 mm at the fence and 100 mm at the machine table. Comes with a 30 mm spindle, infinitely tiltable from -5° to 45°. The spindle tilt is electrically controlled with a highly accurate display. Features right/left rotation. Nationwide delivery and on-site demonstration within Germany by us for €220, so you have no risk when purchasing. Shipping to Austria and the rest of the EU possible on request. Large table opening up to 480 mm, reducible with various rings (enabling the use of cutters with very large diameters; also ensures safe operation with small cutters). Bsdexy S Eiopfx Addedk Spindle speeds: 3000, 4500, 6000, and 9000 rpm. Spindle height adjustment is also electric, with a very precise display. The table is made of heavily ribbed grey cast iron. Exchangeable spindle (a 40 mm spindle can also be used). Very robust, durable construction – built for the heaviest milling operations; suitable for all milling tasks. Optimal power transmission via V-belt drive. Comes with manual/operating instructions. Includes 3-roller power feed HOLZ HER, type 1117. The power feed has right/left operation and 8 speeds. The feed rollers are individually mounted. The machine table is 1180 mm wide and 800 mm deep, plus 2 table extensions on the left and right (each 600 mm wide); there is also a pull-out support. Ready to use immediately. 380V, 5000W and 6000W thanks to 2 speed settings. Equipped with all necessary safety devices, motor brake and emergency stop. The machine is certified by the woodworkers’ employers’ liability insurance association and has a CE mark. The machine weighs approx. 1200 kg. With motor protection switch against overload. Professional machine, not DIY store quality. Optimal, simple, fast and safe handling.

Condition: good (used), Lead and feed spindle lathe Matra SM-3000 Country of origin: Spain Turning diameter over bed 600 mm Turning diameter over support 370 mm Turning length 3000 mm Turning diameter in the crank 900 mm Length of the crank 280 mm Spindle bore 72 mm Speed range 17-1,652 rpm Spindle speed levels 36 Main motor, power 9/11 kW Rapid traverse longitudinal-transverse Tailstock MK5 Machine weight approx. 4 t Dimensions (LxW) approx. 4800x1300mm Bdodpovq I Npsfx Addok Equipment/accessories: - Fixed steady rest with rollers/max. Workpiece diameter 220 mm - Coolant system - Bed stop - Röhm lathe chuck D500mm - Digital display 2-axis SINO - Multifix C base holder The machine is in very good, fully operational condition. Price net, free loading from warehouse

Condition: ready for operation (used), Year of construction: 1977, Available immediately from insolvency: Stanko Lathes (longitudinal and transverse) Type 16 K 20 Year of manufacture: 1977 Retrofit and digital readout in 2012 Bdodpfxexzdlke Addsk Centre height: 200 mm Swing over bed: 400 mm Swing over cross slide: 220 mm Spindle bore: 55 mm Spindle speeds: 12.5 – 1600 rpm Drive: 7.5 kW Chuck Tailstock Coolant system Multifix tool holder with inserts Digital readout Steady rest (Lynette) Weight: 2700 kg Priced at EUR 2,500 plus VAT ex works

Condition: ready for operation (used), Kellenberger cylindrical grinding machine spindle, used, in good condition! Bodjxwbd Aspfx Addjdk

Condition: good (used), L & Z Lathe, Turning Machine Manufacturer: COLCHESTER Model: Mascot 1600 Turning length: 1600 mm Centre height: 210 mm Swing over bed: 420 mm Swing in gap: 710 mm Swing over cross slide: 270 mm Bed width: 345 mm Spindle bore: 76 mm Tailstock taper: MK 5 Tailstock quill stroke: 140 mm Quill diameter: 75 mm Spindle speeds: 20 - 16000 rpm Spindle motor power: 7.5 kW Dimensions (LxWxH): 2900 x 1200 x 1650 mm Weight: approx. 2100 kg Three-jaw chuck Röhm, 250 mm diameter incl. jaws Quick-change tool post, Multifix system size B incl. holders Chip guard Bdodsxzrvqjpfx Addsk Chip tray Chuck guard Coolant pump Bed stop The machine is in operational condition Forklift available, free loading onto truck Affordable shipping possible Location: 59510 Lippetal You will receive a proper invoice according to §25a UStG (margin scheme, differential taxation)

Condition: excellent (used), Year of construction: 2012, CNC - 2 Spindle Horizontal Machining Centre, second-hand Immediately available / ready for operation Manufacturer: Schwäbische Werkzeugmaschinen - Schramberg, Germany Typ: SW BA 322 / Siemen 840 D sl: auf Windows basis und Power Line Servoantriebstechnik Year of construction: 12 / 2012 Axes: X 300 mm; Y 450 mm; Z 375 mm Work spindle: HSK 63 1-10.000 rpm. 25kW at 4,200 rpm. internal coolant supply 40 bar Tool magazine: Pick-up system; capacity 40 (2x20) tool places Workpiece holder; swivel carrier system Q - axis; Two independent swivel axes A - and U - axes Workpiece clamping hydraulics, workpiece support control Coolant system: 1,200 l; paper belt filter, cartridge filter, heat exchanger, high-pressure pump Chip conveyor: Scraper belt conveyor with lifting pump, ejection height 1,100 mm Bdedpfx Adjlxp Ufodek Automatic loading door Automatic rinsing cycle, manual spray gun Machine condition: cleaned, filled with necessary medium in clean condition and is in working order The machine has been checked by SW Maschinen-Service and can be inspected at any time by appointment. Delivery: by arrangement, free loaded ex works, subject to prior sale

Condition: new, Catalog number: H0531 – new machine, in stock – tiltable spindle – with side trolley – CE certificate – DTR documentation in Polish TECHNICAL DATA spindle diameter 30mm spindle stroke 100mm max spindle diameter 180mm Bdjdpfx Adjvw Rtwjdsk spindle adjustable at an angle of -5+45 degrees table dimensions 1000x360mm sliding table 1000x250mm 4 types of speeds 1800, 3000, 6000, 9000 U/min engine power 2.8kW/3.9kW exhaust nozzle diameter 100mm dimensions length/width/height 1150/1155/730mm weight 270kg PRODUCT FEATURES Milling machine lower spindle - table FS 200SF is a massive construction with a table top made of grey cast iron with a high-quality gauge mounted to hold the processing element and high precision of adjustment. The price includes a milling machine with a sliding side carriage. FS 200SF with a tilting spindle is a device with a wide 4-step speed range: 1800/3000/6000/9000 It is successfully used for processing the edges of straight-line elements and for creating decorative strips, grooves, projections, tenons and dovetails The welded steel body and large cast iron table make it a very solid and stable machine, not susceptible to vibration A precise formatting table included Net price: PLN 14,100 Net price: EUR 3,350 Net price calculated according to the exchange rate of PLN 4.2 / EUR (in the event of greater exchange rate fluctuations, the price may change)

Condition: reconditioned (used), We are offering an exceptionally good precision lathe. The machine is probably the best German lathe that has been built in this class. BOEHRINGER precision lathe model DUE 800 Bjdpsrt T S Rsfx Addjdk Year of manufacture: 1984 Order no.: 04041.01-807 Center height: 400 mm Circulation diameter over bed: 820 mm Circulation diameter over facing slide: 515 mm Center width: approx. 2200 mm Effective turning length: approx. 2000 mm Bar passage: 128 mm Spindle head DIN55022 size 11 Drive power: 30 kW Max. Torque: 6300 Nm 24 Speeds: 7.1 - 1400 rpm 60 face feeds: 0.05 - 28 mm/rev 60 longitudinal feeds: 0.06 - 56 mm/rev Rapid traverse in longitudinal cross feed Motorized top support Tailstock quill stroke: 280 mm Tailstock taper: MK 6 Space requirement: LxWxH approx. 6700x2500x2250mm Weight: approx. 7500 kg Accessories: 3-axis digital readout HEIDENHAIN Coolant device; chip protection rear panel, power chuck autoblock 500 mm with clamping jaws, roller conveyor cover for lead screw support to bed, machine light, chip conveyor, Parat basic holder incl. 11 holders, suction unit, 3-jaw steady rest with roller inserts (moving), emergency stop, chuck key, moving center point, operating instructions Condition: The machine is in very good technical and optical condition. Backlash in the top slide 0.1 mm and face slide 0.15 mm The geometry of the machine is also very good (was checked with a dial gauge) Measured on the flat track guide with dial gauge in the direction of the lathe chuck Bed wiper replaced, gearbox input shaft axial play compensated and bearings replaced, drive pins on motor/gearbox side replaced, shaft seals on lock case replaced, various bearings replaced The machine can be demonstrated under power. Functional videos can also be sent on request.

Condition: good (used), Year of construction: 2020, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 2080594, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, operating hours of spindle: 9,500 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Control SIEMENS 840D SL Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C system Total connected load: 133 kVA Power factor: 0.6 Protection: 200 A gG (5 s) Weight Machine operating weight: 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change system: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Bsdpfx Asxt D Ezjddjdk Feed Drives Drive type: Three-phase synchronous motors Travel measuring system X/Y/Z: Direct, absolute X Axes (X1 and X2) Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 2 × 10,000 N Continuous force: 2 × 5,000 N Positioning accuracy: Tp = 0.008 mm Y Axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z Axes (Z1 and Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin-spindle configuration Motor spindles, liquid-cooled, synchronous drive Spindle diameter: 40 mm Tool interface: HSK-A63 Lubrication: Minimal quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Machining Area Spindle distance: 600 mm Travel Paths: - X axis: 600 mm - Y axis: 600 mm (optionally 875 mm) - Z axis: 500 mm Workpiece Clamping / Table System Swiveling mount with two separate rotary tables for installation of clamping bridges Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Maximum workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table rotation speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Positioning accuracy: ±5″ Tangential torque: 4,500 Nm Max. loading moment: 500 Nm Tool Change Times Chip-to-chip for n < 10,000 rpm: > 2.75 s Chip-to-chip for n < 17,500 rpm: > 3.15 s Note The system is delivered without product-specific tools, fixtures, or robot grippers.

Condition: ready for operation (used), Year of construction: 1966, Immediately available from location: L & Z Lathe Weiler Year of manufacture approx. 1966 Centre height 140 mm Bedpfx Ajxy N S Hsddedk Swing diameter 280 mm Over carriage 180 mm Turning length 800 mm Spindle bore 24 mm Spindle speeds up to 1600 rpm Drive power 2 kW Chuck diameter 140 mm Multifix tool holder with inserts Weight 1 ton Priced at EUR 1,500.— plus VAT ex location

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Bedow Rrvwopfx Addjdk Manufacturer: EMCO Model: Emcoturn 45E Year of manufacture: 2018 Few operating hours Control: Siemens 828D Number of tools: 12 driven units Max. speed: 0-6000 rpm

Condition: reconditioned (used), Year of construction: 1956, Lead and Feed Screw Lathe WEIPERT Year of manufacture: 1956 Spindle bore: 90 mm Centre distance: 3000 mm Swing over bed: 800 mm Swing over cross slide: 610 mm Swing in gap: 1120 mm Speed range: 7.5 – 475 rpm Comes with the following accessories: Multifix toolholder with 11 inserts Coolant system 3-jaw chuck 315 mm 3-jaw chuck 400 mm 3-jaw chuck 500 mm Faceplate 400 mm Faceplate 800 mm Bdodpfew Ew D Djx Addek Faceplate 1000 mm Travelling steady Various turning tools (30 insert tools) 2 revolving centres 1 drill chuck Operating manual

Condition: excellent (used), Year of construction: 2021, Vertical Single-Spindle Turning Center Vertical Lathe Manufacturer: EMAG Model: VL 400 (Siemens) Bdsdpfevq Iwyox Addjk Year of manufacture: 2021 Operating hours: approx. 1,848 Turret base unit and Y-axis slide unit HP turret drive unit for driven tools (C442) with internal coolant supply to the tool Max. speed: 6,000 rpm Corner speed: 3,200 rpm Tool holder unit for driven tools: 12 x BMT75 Rotary workpiece transport system, O-design Trailing frame system for 10 workpieces Workpiece height (incl. workpiece pallet): max. 300 mm Workpiece weight: max. 60 kg Set (10 pieces) trailing frames for O-conveyor for workpiece diameter: 150 - 400 mm Blow-off for workpiece and clamping device (pick-up) Coolant supply: 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar Cooling unit (6.5 kW, water-air) One cooling unit (with dual-circuit technology) manages the machine’s thermal balance. Spindle drive, control cabinet and turret are kept at ambient temperature (10°C - 40°C). Double coolant filter, manually switchable Filtration fineness 100 µm, with electric and mechanical contamination indicator Chip conveyor Hinged belt design: rear discharge Chip discharge height 1,100 mm (with integrated coolant tank, capacity approx. 500 l) Emulsion mist extraction: extraction capacity approx. 800 m3/h Rinsing gun Workpiece measurement with touch probe Touch probe air blast Tool life monitoring (sister tool management) Tool breakage monitoring TOOLINSPECT MCU-EUROPA (SIEMENS 840Dsl, FANUC 31i/32i) 3-color signal tower Axial drilling-milling head – BMT75 CC 5x Angular drilling-milling head 90° - BMT75 CC (i=1:1) Set of tools for OP10 + OP20 Hydraulic power chuck cylinder Gr.150 - with 1 media passage Max. clamping force 10,850 daN at 70 bar Coolant through the spindle Programmable clamping pressure adjustment 3-jaw power chuck KNCS-N 500-155 quick-change max. = 2,200 rpm (reference speed as per DIN 6386) Set of hard master jaws Set of soft top jaws Accessories for KNCS-N 500-155 Cleaning nozzle in chuck bore Additional tool holders with tools: 1x 8.BMT25VL8IKX50 Finishing turning tool outer 1x 8.BMT25VL8IKX50 Roughing turning tool outer 1x 60.7516VL8IKDI15 engraving tool 1x 60.7516VL8IKDI15 tap holder 1x 40.75V5KRVL8IKD face mill 50mm 3x 80.75V5VL8IKD boring bar holders 2x 27.V520HYDL26 drill diameter 20mm 1x 42.V522L08Ik drill diameter 22mm 1x 27.V514WNL31 drill diameter 14mm Software package Operating instructions / maintenance manual 21225ä

Condition: used, Demonstration machine Standard equipment: Solid machine frame Long feed table Optimal price/performance ratio Noise protection hood Digital display of width and height settings Technical data: Planing width (finished size) min./max. 18 - 180 mm Bdsdpfx Adovrvvtsdok Planing height (finished size) min./max. 7 -120 mm Min. workpiece length (individual workpiece) 430 mm With group feed 250 mm Number of work spindles 4 Tool diameter of the 1st spindle 120 mm Tool diameter of spindle 2,3,4 min/max 100 mm/180 mm Feed table length 1700 mm Max. chip removal 10 mm Knife shaft speed 6000 rpm Spindle diameter 40 mm Planer head diameter 120 mm Jointing cutter diameter min./max. 120/137 mm Clamping length of vertical spindles 130 mm Clamping length of horizontal spindles 190 mm Feed speeds 6/12 m/min Feed roller diameter 120 mm Feed motor power 0.8/1.1 Kw Horizontal spindle motor power 5.5 Kw + 5.5 Kw Vertical spindle motor power 7.5 Kw Total motor output at 100% duty cycle 20 Kw Suction nozzle diameter 120 mm Minimum speed of the suction air 20 m/s Minimum volume of the suction 3200 m³/h Weight approx. 1300 kg Dimensions LxWxH 2950 x 1180 x 1510 mm Prices subject to change, errors, printing and typesetting errors reserved

Condition: good (used), Year of construction: 2014, operating hours: 48,000 h, functionality: fully functional, machine/vehicle number: 2080233, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Control SIEMENS 840D Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C system Total connected load: 133 kVA Power factor: 0.6 Fuse rating: 190 A gG (5 s) Weight Operating weight of machine: 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change system: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Linear measuring system X/Y/Z: Direct, absolute X-Axis Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Y-Axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z Axes (Z1, Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin spindles side by side Motor spindles, liquid-cooled, synchronous technology Spindle diameter: 40 mm Tool interface: HSK-A63 Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Machining Area Spindle distance: 600 mm Travel paths: X-Axis: 600 mm Y-Axis: 600 mm (optional 875 mm) Z-Axis: 500 mm Workpiece Clamping / Table System OP1: Tilting support with two separate tilting tables for fixture bridges OP2: Double tilting carrier (Q-axis) with two direct-drive NC rotary tables (A-/U-axes) Double-sided gearing on the tilting carrier Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Repeatability Ø 800 mm: < 0.008 mm Max. clamping device and workpiece diameter: Ø 675 mm × 1,430 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Indexing accuracy: ±5" Tangential moment: 4,500 Nm Max. load moment: 500 Nm Bodext D Ebopfx Addedk Tool Change Times Chip-to-chip at n < 10,000 rpm: > 2.75 s Chip-to-chip at n < 17,500 rpm: > 3.15 s

Condition: ready for operation (used), Year of construction: 1975, Immediately available ex-site: L & Z VDF Lathe Type: 21 RO Year of manufacture: 1975 Centre height: 210 mm Swing over bed: 430 mm Swing over support: 250 mm Spindle bore: 56 mm Spindle speeds: 15 – 1400 rpm Drive power: 5.5 kW Weight: 2.5 t Chuck Tool holder Coolant system Bedpfx Adjxy N Sysdedk Price: Euro 2,500.— plus VAT, ex-site.

Condition: like new (used), SCM bottom spindle moulder Sliding carriage in the table 120 cm Height and tilt electrically adjustable Bdedswt A Iqepfx Addek Spindle fi30 7 kW motor 4 spindle speeds Very good condition

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Specifications and technical details: Spindle adjustment: –5° to +45° Spindle adjustment: electric with digital display Height adjustment: electric with digital display Fence: with digital display Spindle diameter: 30 mm (MK-5 taper) Motor output: 11 kW Speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Bedpfx Adjxiztzodsdk Table size: 1,340 × 800 mm Table extension: on both sides, with pull-out frame support Dimensions: 2,540 × 1,350 × 1,850 mm Weight: approx. 1,000 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2020, operating hours: 23,000 h, functionality: fully functional, machine/vehicle number: 2630079, travel distance X-axis: 800 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 650 mm, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, controller manufacturer: Siemens, controller model: 840D sl, workpiece diameter (max.): 1,830 mm, workpiece weight (max.): 800 kg, rotational speed (max.): 40 rpm, overall weight: 28,000 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 17,500 rpm, operating hours of spindle: 11,000 h, distance between spindles: 800 mm, number of spindles: 2, number of slots in tool magazine: 84, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This high-precision twin-spindle machining center from the SW series is designed for maximum productivity in mass production, especially in the automotive and supplier industries. The machine features two symmetrically arranged motor spindles, a twin NC rotary carrier, and two direct drive rotary tables, enabling simultaneous 5-axis machining and parallel metal cutting operations. Equipped with a Siemens 840D sl CNC control, minimum quantity lubrication, high-dynamic feed drives, and an 84-position tool magazine, the system provides dynamic, precise, and energy-efficient machining processes. The compact design and pick-up capable tool system ensure short chip-to-chip times and high machine availability. This machine is ideal for demanding precision machining tasks such as housings, structural components, gear parts, and components made from aluminum, cast iron, and steel in high-volume production. CNC Control SIEMENS 840D SL Electrical connection Supply voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C network Total connected load: 152 kVA Power factor: 0.6 Protection: 250 A gG (5 s) Weight Machine operating weight: 28,000 kg Transport weight: 24,500 kg Tool Magazine Tool change: Pick-up system Tool management: Fixed coded tool positions Capacity: 84 tools (2 × 42) Max. total tool weight: 400 kg Feed Drives Drive type: Three-phase synchronous motors Travel measurement system X/Y/Z: Direct, absolute X1- and X2-Axis Rapid traverse: 120 m/min Max. acceleration: 10 m/s² Kv factor: 6 Peak force: 2 × 6,000 N Continuous force: 2 × 3,000 N Positioning accuracy: Tp = 0.008 mm Y-Axis Rapid traverse: 120 m/min Max. acceleration: 11 m/s² Kv factor: 6 Peak force: 20,000 N Continuous force: 10,000 N Positioning accuracy: Tp = 0.008 mm Bdjdpfx Aoxt D D Reddek Z1- and Z2-Axis Rapid traverse: 120 m/min Max. acceleration: 20 m/s² Kv factor: 6 Peak force: 2 × 6,000 N Continuous force: 2 × 3,000 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin spindles side by side Spindle diameter: 40 mm Tool interface: HSK-A63 Cooling: Liquid-cooled motor spindles Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (nominal torque) Machining Area Spindle distance: 800 mm Traverse paths: - X-axis: 800 mm - Y-axis: 900 mm (optional 1,200 mm) - Z-axis: 650 mm Difference coupled Z axes: < 1.0 mm Difference coupled X axes: < 1.0 mm Workpiece Clamping / Table System Twin rotary carrier (Q axis) with two direct drive NC rotary tables (A/U axes) Swivel time 0–180°: 5.0 s Max. asymmetric load: 1,600 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Max. workpiece weight: 800 kg Peak torque: 1,900 Nm Nominal torque: 1,300 Nm Max. table rotation speed: 40 rpm Tool Change Times: Chip-to-chip with n < 10,000 rpm: > 3.0 s Chip-to-chip with n < 17,500 rpm: > 3.15 s Note The system is supplied without product-specific tools, clamping devices or robot grippers.