Used Spraying Technique for sale (2,033)

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 220 V, oil tank capacity: 5 l, machine/vehicle number: GDI-6000, Equipment: CE marking, It features a specially designed ergonomic structure. (The cabinet section also serves as a cargo carrying box.) Aluminum body, test rail, and bottle holder; flexible, custom test tubes resistant to hot and cold weather conditions, 6X150 (mg). From 1 injector to 6 injectors, with easy-to-connect fittings, injectors can be connected in a short time. Thanks to the injector drip reservoir, you can perform detailed spray pattern detection. Each test lasts a maximum of 90 seconds. With a 200 bar system (Electronic Measurement) specially designed for the GDI-6000, pressures are measured clearly. The GDI-6000 reaches a maximum of 200 bar. Thanks to this pressure, drip tests can be observed very clearly. With the ability to print receipts, you can provide test results to service centers and organizations that require them. Hodpfx Aijz D H Dfjrjw Thanks to the DATABASE, the (mg) values that more than 6000 different types of injectors should deliver can be seen on the 7.0-inch touch screen. Thanks to the NEW-ENJ+ MODE, you can create and save injectors and injection parameters that are not found in the DATABASE. Thanks to the OHM-TEST MODE, you can measure the injector (OHM test) values. AUTO-1: Low speed (4000 RPM) AUTO-2: Medium speed (5000 RPM) AUTO-3: High speed (7000 RPM) DRIP TEST: Thanks to the Leaking Out mode, you can perform injector drip (leakage) tests clearly under pressure. Thanks to the MANUAL MODE, you can perform the desired RPM, PULSE, and TIMER tests with the RPM+ PULSE+ and TIMER+ settings.

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L – Like New – Only 10 Minutes of Use – Wide-belt sanding machine including version for intermediate sanding of coatings Special price for showroom machine – in-house exhibition machine – - Robust, space-saving W-type wide-belt sanding machine for the highest demands. - Constant working height thanks to adjustable headstock - Working width: 1350 mm - Top-grinding, with 2 sanding units - Grooved rubber contact roller in proven hardness - Contact roller level adjustable in stages according to a grit scale - Electric raising/lowering of the contact roller according to the selected unit - Electronically controlled segment sanding pad - Entire sanding pad unit adjustable by 10 degrees - Parallel spring-mounted, ground steel pressure roller at the infeed - Rubber-coated pressure roller between the sanding units and at the outfeed - 2 motors, 18.5 KW and 11 KW, 400 Volt, 50 Hz - Motor-driven fine adjustment of the height with digital display - Belt tension, control and oscillation pneumatically controlled Compressed air consumption approx. 2 l/min Hodpfx Ajk Dpp Soirew - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 KW with transport belt and drive roller - Vacuum device for the entire work table with additional holes of over 200 mm for smaller workpieces - Automatic thickness adjustment over the entire working width - Workpiece over-thickness protection with feed instant stop and lifting mechanism - Infinitely adjustable chip removal rate - Electronic feed control on the control panel, infinitely adjustable from 3 - 15 m/min - PLC control with Teach-In memory - Pneumatic belt control - Workpiece support with roller at the infeed and outfeed - Enormatic: Fully automated quick setting and feed release - Eco energy-saving mode - Fault diagnosis - Passage height 210 mm up to 18.5 KW - Sanding belt dimensions 1350 x 2000 mm Perfect – Features: High-quality swiveling plexiglass control panel - 10-inch touch screen - Industry control - Automatic pressure regulation and storage of the sanding pad elements - Electronic compensation of the sanding belt grit size - Cycle counter and operating hour counter Coating equipment - Infinitely adjustable sanding belt speed on the 2nd unit - Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process - Electronic sanding pad with a segment width of 22 mm - Additional sanding pad insert Additional options included with the machine: Fold-down outfeed table extension (without top) C10) LED package ASB5+AS3) ECS workpiece blowing system with fan Location: 54634 Bitburg - Available immediately -

Condition: new, Year of construction: 2026, Type designation and technical data The outstanding advantages: Hedeb R D U Sspfx Airew Space-saving compact design – comfortable and high-performance. Excellent surface quality and pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture area thanks to air guide plates – also suitable for larger workpieces. Separation rate for paint mist up to 99%, retention capacity of the pre-filter up to 18 kg/m² – resulting in a long filter life! Simple and quick filter change on the front side. Cost-effective replacement filters. Low initial costs and extremely low energy consumption. Dry spray booth made of galvanized sheet steel with a welded base frame, cardboard labyrinth filter as a pre-filter, and fiberglass filter as a post-filter unit. Ex-fan including throttle valve mounted on the left side. Do not compromise on the quality of the surface finish. Easy Paint extraction walls are the ideal, cost-effective solution for the effective capture and filtration of paint mist and the extraction of solvent vapors. Robust and high-performance, yet economical in consumption. Standard extraction capacity Easy Paint 3500 Article No. 600025 Airflow rate in standard configuration * 3500 m³/h Primary filter area 2.5 m² Secondary filter area 2.0 m² Motor power 400V/50Hz 1.1 kW Connection for extraction pipe D = 300 mm Width in mm 2750 Overall height in mm 1455 Depth in mm with capture area 855 Weight in kg 145 Location: In stock at Bitburg Exhibition machine available at a special price.

Condition: used, Year of construction: 2004, power: 16.2 kW (22.03 HP), input voltage: 400 V, input frequency: 50 Hz, total height: 2,100 mm, total length: 7,400 mm, total width: 1,100 mm, overall weight: 3,200 kg, Equipment: CE marking, No. 3267 Edge banding machine Brandt KDF 680 Used, year of construction 2004 Workpiece thickness 8 - 60 mm Edgebanding thickness 0.4 - 12 mm Control system Brandt Power Control PC 16 Connected load of the basic machine 16.2 kW Power supply 400 V / 50 Hz / 3-phase Pre-milling unit Gluing unit Quickmelt End trimming unit with program-controlled switching between straight and bevel trimming Combination trimming unit for flush, bevel and radius trimming Corner rounding unit Profile scraping unit Hodoz Rgpcspfx Airjw Flat scraping unit Buffing unit for polishing the edges Release agent spraying system Additional equipment: Hot air system Schugoma HDL3020 Retrofitted hot air system, year of construction 2015 Power 6 kW Separate control unit Hot air activation of the functional layer of compatible zero-joint edgebanding (laser edgebanding) to create a visually seamless joint Transport dimensions approx. 7400 x 1100 x 2100 mm LWH Weight approx. 3200 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,202 h, laser power: 2,700 W, travel distance X-axis: 2,500 mm, number of axes: 3, This 3-axis TRUMPF TRUMATIC L 2530 Plus was manufactured in 2005 and will come with a Storemaster. It features a powerful 2700 W laser and includes advanced equipment such as a laser cutting head with 3.75" and 7.5" lenses, automatic sheet edge detection, and programmable cutting gas selection. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TRUMATIC L 2530 Plus CO2 laser cutting machine we have for sale. Contact us for further details. Hsdjz R Aa Ropfx Airew - Mains Supply: 400 V / 50 Hz- Connected Load: 63 kVA- Control Voltage: 24 V =- Required Fuse Protection: 3x 100 A- Compressed Air Connection: 7-10 bar- Nitrogen Connection (N2): 30 bar- Oxygen Connection (O2): 16 bar- Standard Equipment: Hi-Las high-pressure cutting, Laser cutting head with 3.75" lens, Laser cutting head with 7.5" lens, Cutting head quick-change device, Automatic sheet outer edge detection, Positioning laser diode, Programmable cutting gas selection/pressure setting, Microweld, SprintLas, Capacitive height control (DIAS III), ContourLas, AutoLas Plus, Oil spray device, Automatic pallet changer, Working area lighting, Slag/small parts chute, Multi-chamber dust extraction, Compact dust extractor, Automatic shut-off, Safety devices, ToPs 100 lite, Tele-diagnosis device, RJ45 network connection- Special Equipment & Accessories: 3.5" floppy disk drive, Detailed operating manual, Automatic pallet changer with safety light barrier, AutoLas Plus, Clamping jaws for Pallet A+B (4 pcs each), Additional 3.75" laser cutting head, Loading device (overhauled in workshop 2017), Programming software TRUMPF TruTops Laser, Gas fittings, Teleservice via Internet- Chiller Unit (Riedel L15/21-TR3.23, YOM: 10/2004): 400 V / 50 Hz, 42 A, IP54, Refrigerant R134a (11.5 kg), Max working pressure 20.2 barStoremaster:- Drawer Usable Area: 2,500 x 1,250 mm- Max Load per Drawer (evenly distributed): 3,000 kg- Max Load per Top Level (evenly distributed): 3,000 kg- Max Load per Rack Block (evenly distributed): 60,000 kg- Max Load at Crane Hook: 325 kg- Max Load under Vacuum Lifter (evenly distributed): 180 kg- Special Equipment: SCHMALZ vacuum lifter- Dimensions (from technical drawing): Height ca. 3,500 mm / 4,170 mm (modified/adjusted height ca. 3,500 mm), Width ca. 3,600 mm - 5,900 mm depending on layout/extension, Depth ca. 2,700 mm - 4,700 mm- Upper Grid Floors Capacity: 7,500 kg surface load each

Year of construction: 2026, condition: new, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro XL from the premium manufacturer Rational (successor to the VCC 311). Please inquire about availability! This multifunctional tilting frying pan can be adjusted to Balance Power (reduced power) as needed. This is new goods, in original packaging, fully functional, with a full manufacturer's warranty. The offer does not include any accessories, but they can be purchased for an additional charge if desired. The list price for this unit is €26,730 net = €31,808.70 gross. You will receive an invoice with VAT shown. Hsdpfx Ajzbk Efjirjw Service: We will gladly assist you in finding a certified Rational service partner throughout Germany. Our service for you: * Full manufacturer's warranty / from commissioning * High-quality branded equipment at fair prices * Professional overhaul / inspection & expert cleaning * Tested & fully functional - or money back * Flexible shipping or self-collection options * Competent advice - before and after purchase * Provision of operating instructions, connection diagrams & spare parts * Inspection according to DGUV V3 Technical data: * W x D x H: approx. 1365 x 894 x 1078 mm * Power connection: V: 400 / kW: 34 / Hz: 50 * Year of manufacture: 2026 * Capacity: 150 liters * Weight: 245 kg Condition: New goods, in original packaging, full manufacturer's warranty Further information: * Balance Power: reduced connection value from 41 to 34 kW * Integrated 230 V socket * Integrated hand shower with automatic retraction and spray dosage * High-quality pot bottom, seamless with rounded corners * Core temperature sensor with 6 measuring points * 1,200 programs, each with up to 12 steps, programmable and nameable * Integrated spray hose on the unit * Integrated water drain in the pot * Temperature unit adjustable in °C or °F * Cooking pot can be tilted * Lid with integrated water inlet * Automatic display of service messages * IPX5 splash water protection * USB interface for HACCP data output and updates * Including base with plastic feet Functions: * Manual mode (30°C-250°C): adjust liquid temperature, adjust pot bottom temperature, adjust oil temperature * Automatic, liter-precise water filling device * Delta-T cooking * Auto Lift: lifting and lowering device (baskets for cooking and frying) Shipping: * Delivery or self-collection by arrangement * Worldwide shipping on request * Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. Sales are made exclusively subject to our general terms and conditions (GTC).

Year of construction: 2008, condition: used, functionality: fully functional, This is a combination steamer, also known as a convection oven, manufactured by Convotherm, model OGS 20.20, in a gas-powered version, direct injection, without a boiler, manufactured in 2008. The unit is set for natural gas; it can be converted to propane gas. The combination steamer is functional; videos can be sent upon request. The combination steamer is equipped with a trolley for 20 x 2/1 GN or 40 x 1/1 GN pans and includes 2 x 1/1 GN insert racks. The unit is sold without inspection or warranty, as received from the customer. An inspection will certainly be necessary for recommissioning. Wiring diagrams and documentation are included. Only frozen, ready-made meals have been heated/regenerated in this combination steamer. Hjdpjz Smhiefx Airjw You will receive an invoice with VAT shown. Our used equipment service for you: High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Checked & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating manuals, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1232 x 1055 x 1952 mm Power connection: V: 400 / kW: 2.2 Gas connection: kW: 70.0 Insert slots: 20 x 2/1 GN or 40 x 1/1 GN Weight: approx. 403 kg Year of manufacture: 2008 Condition: Used, no inspection Additional information: ACS Advanced Closed System (automatic energy-saving system, optimal humidity in the cooking chamber) Crisp & tasty (multi-stage cooking chamber dehumidification in ACS) Press & Go (image symbol) for quick selection of predefined cooking recipes Tray Timer (staggered loading) Start time pre-selection in real-time mode Night baking Delta-T baking (requires multi-point core temperature probe) Cook & Hold Programmable with 250 cooking recipes, each with up to 20 steps CONVOTHERM cookbook with pre-programmed cooking recipes Disappearing door: more space and improved workplace safety Double-glazed door with integrated door stop Antibacterial door handle latch with ventilation position and safety function Door handle latch with closing function Motor brake when opening the cooking chamber door: less steam escaping Fan with autoreverse function Handheld spray with stepless adjustment Multi-point core temperature probe Height-adjustable device feet Easy operation via menus/icons Bright graphic display Digital rocker switch for easy adjustment of temperature, time and core temperature Modular processor control with clear display and module self-check RS232 interface Storage of all device settings and cooking recipes in an additional memory module Permanent self-diagnosis for fault detection System with full-text error description Safety program mode: operation of the device with limited functionality is possible Basic prison version Robust design in stainless steel Seamless welded cooking chamber Rounded cooking chamber corners Suction plate easily removable Hygienic socket seal Cooking chamber lighting with shock-resistant glass cover Including loading trolley with condensate collection tray

Condition: new, minimax me 35 tr s edge banding machine by Holzkraft -Exhibition machine- Dimensions and weights: - Length (product) approx.: 3314 mm - Width/depth (product) approx.: 1085 mm - Height (product) approx.: 1300 mm - Weight (net) approx.: 623 kg Equipment: - Roller edge turning table: 730 mm - Anti-adhesive spray unit - Pre-milling unit: with two diamond milling cutters - Edge preheating device: with ceramic infrared lamp - Glue pot quick-change kit - Edge banding unit - Corner copying unit - Flush radius milling unit: manually switchable - Radius draw blade unit: Manually switchable, with numerical position indicator - Flush draw blade unit: Manually switchable, with rotating copying device - Buffing unit Flush radius milling unit: - Flush radius milling unit power input: 2 x 0.35 kW - Flush radius milling unit milling cutter diameter HM: 55.3 mm - Flush radius milling unit milling cutter speed: 12000 min¯¹ - Flush radius milling unit extraction port diameter: 2 x 60 mm Corner copying unit: - Corner copying unit power input: 0.35 kW - Corner copying unit tool diameter: 58 mm - Corner copying unit speed: 12000 min¯¹ Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz Gluing unit: - Glue pot power input: 0.25 kW - Glue pot working temperature: 190 °C - Glue pot extraction port diameter: 60 mm - Glue pot filling capacity: 0.8 kg Pneumatic connection: - Operating pressure: 6.5 bar - Air consumption: 470 l/min Feed: - Feed power input: 5 kW - Feed speed: 7 m/min Edges: - Edge thickness roll material: 0.4 – 3.0 mm Pre-milling unit: - Pre-milling unit extraction port diameter: 2 x 80 mm - Pre-milling unit power input: 3 kW - Pre-milling unit milling cutter speed: 7200 min¯¹ - Pre-milling unit diamond milling cutter diameter: 80 mm - Pre-milling unit milling cutter height: 56 mm - Pre-milling unit material removal: 0.5 / 2 mm Draw blade units: Hsdpfsv Nhhpjx Airjw - Radius draw blade: 2 mm Buffing unit: - Buffing unit power input: 2 x 0.14 kW - Buffing unit speed: 2800 min¯¹ Workpiece: - Workpiece thickness: 8 – 50 mm - Workpiece length min.: 120 mm - Workpiece width min.: 110 mm - new exhibition machine -

Condition: new, Year of construction: 2026, functionality: fully functional, The DMS 600/4S is an automatic painting machine manufactured by our company, designed for painting or staining furniture components, stairs, moldings, and panels with a maximum height of 80 mm. Easy and straightforward operation, combined with the latest technology, guarantee the highest quality of painting. The compact dimensions of the machine allow it to be used in smaller spaces. The machine is controlled via a 19" touchscreen based on intuitively designed software. The machine is designed so that all maintenance operations, such as filter replacement, cleaning, and changing paints or stains, can be performed in an optimal manner. The DMS 600/4S is manufactured according to well-known and proven principles: the system is designed as an enclosed booth with the option of connecting an air extraction system and a particulate filter. The machine is equipped with a conveyor belt, which, depending on the model, can be protected with foil/paper or equipped with a scraping and cleaning system for the main belt. Both systems are designed for paint recovery. The painting zone includes a movable arm that can accommodate up to 4 spray guns. The spray guns are mounted on adjustable brackets (the spray guns are suspended so that the height can be adjusted by +/- 100 mm). At the inlet, the machine is equipped with an EX sensor bar for detecting objects. The object detection scanner works by transmitting the outline of the object to the controller, which then appropriately controls the operation of the spray guns, applying paint only to the object's surface. The machine is prepared for the installation of low- or high-pressure painting equipment. Key information: - Working width 600 mm, - Movable carriage with spray guns - Paint recovery system for reuse - Belt cleaning system - Small machine adapted to customer needs Hedpfe Aa Iwrox Airjw

Condition: used, Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer, with their advanced digital control systems, represent significant advancements in the application of digital and optical technologies in easy-to-use laboratory weathering equipment. The 3000 series has been approved by many OEMs in the textile, paint, and coatings industries, as well as in the plastics industry, as an exclusive platform for precise, reproducible, and repeatable results for predicting service life. Features: Climate type Test type: Sunlight simulation Light source: Xenon arc lamp Applications: Additives and dyes Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000's humidification system uses a compressed air ultrasonic spray nozzle. Before entering the system, the compressed air must pass through a water/oil separator. The small air regulator in the CI3000 contains a second water-oil filter and a 5-micron solid particle filter. Ensure that a separate oil-water separator is installed and do not rely on the air regulator filter, as it is designed only as an additional device. Compressed air specifications Pressure: 80-100 PSI (552-689 kPa) Flow rate: 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the CI3000 37.5" Width x 29" Depth x 72" Height (95 cm Width x 73 cm Depth x 183 cm Height) Required footprint: 41.5" Width x 80" Depth Hedjzg Tmhjpfx Airew (105 cm Width x 203 cm Depth) Total weight: 404 kg Voltage: 380-220 V 38 A 50 Hz ~3/N/PE 8 kW 404 kg Condition: used Scope of supply: (See image) (Subject to changes and errors in technical data and information!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: MF01/2012, METRON AIR heated spray booth / extraction booth for sale For sale is a METRON AIR spray booth/extraction booth manufactured in 2012, with a heated drying function. It can be used for extracting and filtering paint mist during painting operations, as well as for drying and curing the workpiece. Key technical specifications: Dimensions: 3.6 × 4.0 × 2.8 m Inflow air volume: 14,000 m³/h Extraction air volume: 14,000 m³/h Power supply: 400 V, 32 A, 50 Hz Fan motor power: 4.0 kW Riello Gulliver BS 3 burner head, with a maximum burner and heat exchanger output of 120 kW Hedj Ab Huxspfx Airew Painting phase: approximately 25 °C; drying phase: 60 °C Dry dust separator, EU3 filter system 85–90% air recirculation in drying mode The machine manual and the 2023 fire safety compliance test report for the METRON Air series are available.

Condition: used, Weiss Type: SWT 600/800-S Spray Water Test Unit for IP protection tests IPX1 / IPX2 / IPX3 / IPX4 / IPX4K / IPX9K For sale is a professional spray water test unit from Weiss Umwelttechnik GmbH. The unit is used to perform standardized water, spray water, and ingress protection tests on components, housings, electronic components, vehicle parts, and technical products. Suitable for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch panel. Test sequences can be automated. The unit features a stainless steel test chamber, rotating test table, swivel arm, water circulation, and available test accessories. Technical data according to the nameplate / documentation: Electrical data: Voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram No.: 82962 CE marking available Water connection according to documentation: Water inlet: R 3/4" Water outlet: R 1 1/4" Water pressure supply line: approx. 2 – 6 bar Water pressure IPX9K: adjustable approx. 80 – 100 bar Turntable speed: approx. 1 to 5 RPM Swivel speed: approx. 60 °/s Permissible ambient temperature according to documentation: approx. 10 °C to 35 °C Dimensions and weight: Test chamber SWT 600/800: approx. 2350 x 2400 x 2650 mm with hinges and door lock Test chamber without hinges and door lock: Hodpszachcefx Airsw approx. 2350 x 2400 x 1850 mm Weight of the test chamber: approx. 650 kg High-pressure unit: approx. 850 x 1200 x 800 mm Weight of the high-pressure unit: approx. 380 kg Total weight according to available data: approx. 1030 kg Noise level according to documentation: approx. 88 dB(A) Heat dissipation to the environment: average approx. 1 kW maximum approx. 3.5 kW Equipment: Touch panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earthing point CE marking Robust industrial design Available documentation: Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories include, among others, as shown in the pictures: Various spray and test components Nozzle ring / spray ring Swivel arm accessories Flow meter Connection components Tools / keys Test accessories Documentation and documents Inspection and testing on site is possible and desired after prior appointment. Scope of delivery: Weiss Umwelttechnik SWT 600/800-S Spray Water Test Unit High-pressure unit Turntable / swivel arm Test and spray accessories as shown in the pictures Operating manual / documentation Accessories and components as shown in the pictures Condition: Used Optical condition see pictures Scope of delivery as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale We will be happy to answer any further questions by telephone.

Condition: used, empty load weight: 10,180 kg, maximum load weight: 31,820 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2018, next inspection (TÜV): 03/2026, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 8,100 mm, color: white, Year of construction: 2018, mileage: 4,93,028 km, Equipment: ABS, tail-lift, Tomvekt: 10180kg, tillatt totalvekt: 42000kg, Lasterom (L B H): 13.410 mm x 2.490 mm x 2.700 mmdekkdimensjon: 385/65 R22.5, Lasteromsvolum: 90 m³, Foraksel: , 2. aksel: , 3. aksel: , Luftfjæring, Underkjøringshinder, Boggi, Pallekasse, Bakløfter: Bär, Elektronisk bremsesystem EBS, Tilkoblingsplugg 1x15 og 2x7 pin, Anti-spray, Thermo King cooling unit, Diesel hrs: 20.247, El hrs: 19, Bär tailliftMOT/PKK 2/3/26WSM0000020153375487279 DZ5632, Hedpfxswvpbcs Airow

Condition: used, empty load weight: 9,500 kg, maximum load weight: 32,500 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2019, next inspection (TÜV): 07/2026, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 8,100 mm, color: white, Year of construction: 2019, mileage: 2,04,444 km, Equipment: ABS, Tomvekt: 9500kg, tillatt totalvekt: 42000kg, Lasterom (L B H): 13.410 mm x 2.490 mm x 2.700 mmdekkdimensjon: 385/65 R22.5, Lasteromsvolum: 90 m³, Foraksel: , 2. aksel: , 3. aksel: , Luftfjæring, Underkjøringshinder, Boggi, Elektronisk bremsesystem EBS, Verktøykasse, Dobbeldekk, Tilkoblingsplugg 1x15 og 2x7 pin, Anti-spray, Carrier cooling unit,Diesel hrs: 13.930, el hrs: 84, 270 internal / 410 external height, 18t king pin, 8100mm 02.07.2026Not for train, Hjdpfexaqc Hjx Airjw

Condition: used, empty load weight: 9,297 kg, axle configuration: 3 axles, first registration: 08/2018, suspension: air, Year of construction: 2017, Equipment: ABS, Tomvekt: 9297kg, Luftfjæring, Underkjøringshinder, Elektronisk bremsesystem EBS, Tilkoblingsplugg 1x15 og 2x7 pin, Anti-spray, Hsdjx Stpijpfx Airsw

Condition: used, empty load weight: 6,669 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2021, next inspection (TÜV): 08/2027, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R22,5, color: silver, Year of construction: 2021, Equipment: ABS, Unladen weight: 6669 kg, permissible total weight: 36000 kg, load securing system with certificate, cargo area (L W H): 13,620 mm x 2,480 mm x 2,680 mm, tire size: 385/65 R22.5, certificate DIN EN 12642 (code XL), cargo area volume: 90 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underride guard, lift axle at the front, pallet box, electronic braking system (EBS), toolbox, spare wheel holder (2x), bolted chassis, sliding tarpaulin, connection plug 1x15 and 2x7-pole, anti-spray, telematics system. You can find our entire range of vehicles at . Would you like financing? With our value-added services, we offer you individual financing options, full-service and telematics services. We will be happy to advise you. Hedj Agpxlspfx Airow

Condition: new, power: 330.97 kW (449.99 HP), fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: red, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6, number of seats: 6, Year of construction: 2026, Equipment: ABS, additional headlights, air conditioning, airbag, central locking, differential lock, parking heater, power assisted steering, trailer coupling, truck registration, From our range of new vehicles, we offer you: Tank Firefighting Vehicle TLF 4000-Crew 4x4 All-Wheel Drive on off-road capable SCANIA P450 XT chassis Demanding operations require high-quality and efficient equipment. Our TLF 4000-Crew on Scania ensures fire crews, technology, and large quantities of extinguishing agents arrive quickly and safely at their destination. Chassis: • SCANIA P450 XT 4x4 EURO 6 with 450 HP (331 kW) • Automated gear transmission • Off-road tires, dual tires on rear axle for high driving stability • Front winch available upon request Cab: • Standard SCANIA CREW CAB crew cab (1:5) in RAL 3000 (fire red) • Standard 4 SCBA holders in crew compartment • Air conditioning and auxiliary heater Superstructure: • High-quality frame construction made of rust- and corrosion-free materials • Fold-out steps for each side equipment compartment • Stainless-steel, individually customized equipment storage • Walkable, slip-resistant vehicle roof • Ladder mount, available with withdrawal aid upon request • Quick access to pump via a combination of roller shutter and rear flap, which also provides weather protection Vehicle pump/extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump TITAN S40HP/FPN 4000-10 as per EN 1028 • Pump & Roll capable • Output 4,000 l/min at 10 bar and 400 l/min at 40 bar • Clearly arranged, intuitive pump controls • Additional information display for the operator • Fault-resistant external venting system • Integrated, infinitely adjustable foam mixing system • 5,000 l water tank with integrated 500 l foam agent tank • Additional heater in pump compartment Firefighting equipment: • High-pressure rapid intervention with 60 m form-stable hose • Roof-mounted foam/water monitor 2,400 l/min, also available as remote controlled • Additional front monitor available • Self-protection system with 4 spray nozzles in front of the wheels Safety and lighting: • LED lightbar on vehicle roof • LED front flashers • Pneumatic special signal system • 100 W loudspeaker system with PA functionality • Rear view camera • Comprehensive LED lighting in crew and all equipment spaces • LED scene lighting on superstructure and additional spotlights • Pneumatic LED light mast with remote control • Hygiene board available upon request Hjdpoyh N Nyjfx Airjw We are happy to provide you with a detailed quotation and present the vehicle in detail. Note: All information has been provided to the best of our knowledge and belief, but without guarantee for completeness or accuracy. Images may show optional equipment. This is for information purposes only and does not constitute a binding offer. Subject to prior sale!

Condition: used, machine/vehicle number: WFDFLT33502019721, empty load weight: 6,927 kg, maximum load weight: 28,073 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R19,5", color: black, Equipment: VDI 2700 certified, Attention: The pictures shown are archive images. The vehicle may still be in operation! Chassis Fine-grain steel welded chassis with lightweight design, equipped with a replaceable 2" kingpin. Slightly angled outer frame with Load-Lock profile for load strap attachment. Note: When sideboards are fitted, they must be opened before straps can be attached. Not usable in the gooseneck area. Additional 10 pairs of recessed lashing rings, each rated at 2.5 t. 24-tonne two-speed landing gear with single-side operation and straight foot, without compensating mechanism. Foldable front support legs, extendable and foldable outward in front of the headboard; positioned as far inward as possible during transport. Rear access ladder, side-mounted door retainers, wheel chocks with holders, aluminium side underrun protection, galvanized steel rear underrun protection, quarter fenders in front of the first axle and behind each axle, anti-spray mudflaps behind each axle, rear impact protection with Heavy Blocker cross beam, heavy-duty pallet stop on both sides (approx. 20–25 mm high) with lashing points every 200 mm. Loading height reduced by approx. 20–25 mm. Plastic toolbox. Axles & Suspension SAF disc brake axles with air suspension, without lift axle. Braking System Dual-line air brake system with spring parking brake. Two colour-coded coupling heads at the front without connecting lines. Electronic Braking System (EBS) with front EBS socket (without connecting cable). Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality. Equipped with raise/lower valve and Vehicle Stability System (RSS). Electrical System 24 V electrical system with multi-chamber lights, yellow LED side marker lights, two white LED front position lights, two red/white rear outline marker lights, and 2 × 7-pin plus 1 × 15-pin front sockets (without connecting cables). Floor Steel front floor section with anti-slip coating. Approx. 30 mm phenolic plywood floor, Omega-reinforced cross joints, longitudinal support beams for high point loading, suitable for forklift axle loads up to 7,100 kg. Steel chequer plate flooring in the wheel area. Front Wall Front bulkhead approx. 2,580 mm high with steel corner posts in volume design. Front curtain release mechanism. Internal steel impact protection up to approx. 140 mm height. Sliding Posts Three pairs of full-length sliding posts with four socket positions and extended lower pockets. Three post positions with aluminium side slats. Rear Frame Steel rear corner posts extending to roof level, curtain tensioning system with round tube and ratchet. Double rear portal doors with two internal locking rods per door. Curtain PVC curtain with welded horizontal and vertical reinforcement straps, stainless steel tension buckles, and customer branding on the rear portal. Roof Hjdokyrlwspfx Airsw Sliding roof with rear end-lift, opening from rear to front. L-roof beams suitable for automotive logistics. Internal roof width approx. 2,490 mm. White roof curtain. EcoLift lifting roof, adjustable by approx. 380 mm with gas strut assistance. Anti-Ice System with centrally positioned hose and automatic ventilation. Registration & Certification Approved for registration in Germany, type-approved according to EC Directive 2007/46. EN 12642 XL load securing certificate (valid only with four rows of aluminium side slats), additional DC 9.5 certificate

Condition: used, mileage: 1,06,865 km, power: 175 kW (237.93 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, total width: 25,500 mm, total height: 37,500 mm, loading space length: 68,000 mm, loading space width: 23,000 mm, loading space height: 5,000 mm, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, Mr. Seidel will be pleased to assist you (via telephone). Mercedes-Benz Atego 1324 L 4x2 glass-side flatbed with rear-mounted crane A1K Front axle, 5.3 t; A2P Rear axle, crown wheel 390, hypoid, 9.2 t; A2Y Rear axle, narrow version; A2Z Rear axle differential lock; A6B Axle ratio i = 4.778; B1B Electronic brake system with ABS and ASR; B1D Electronic air supply unit, medium; B1F Heating, electronic air supply unit; B2C Disc brakes on front axle, drum brakes on rear axle; B4A Condensation monitoring for compressed air system; B5B Trailer brake, 2-line; C3D Wheelbase 5,360 mm; C5I Mounting parts for flatbed; C6B Steering ZF 8095; C6Y Stabilizer under frame, rear axle; C7H Side guard; C8J Spray protection integrated in mudguard; C9P Chassis overhang extended, 600 mm; D1C Driver air-suspension seat, comfort; D1M Passenger fixed seat, standard; D2V Armrests on both sides, driver's seat; D3Q Seat cover velour; D4B Classic cockpit; D4W Electric window lifters on both sides; D4Y Side sun roller blind, driver's side; D5Y Rubber mats, driver and passenger side; D6F Air conditioning; D6Y Pollen filter; D7L Overhead storage above windscreen, single compartment; D7Q High console storage on engine tunnel; D7W Storage behind base box; D8A Roof hatch/vent; E0Y Battery cover; E2J Circuit breakers; E3W PSM 2nd generation; E4C Additional functions for bodybuilder; E5A Switch No. 1 for external body electrics; E6A Trailer socket 24V, 15-pin; E6Y Reverse warning system combined with hazard lights; E7F Cable remote control for air suspension; F1P S-cab; F1X S-cab ClassicSpace, 2.30 m, with tunnel; F2U ClassicSpace; F4I Cab rear wall with window; F6C Tinted windscreen; F6I Heated front mirror; F6J Main mirror, electric, driver side; F7V Cab access, two steps; F8E Locking system with central locking; F8F Comfort locking system; F8V Light sensor; F8W Rain sensor; G0K Drive mode economy/power; G1D Transmission G 90-6/6.70-0.73; G5G Mercedes PowerShift 3; I1C Tubeless tires 10 R 22.5 front axle; I4A Axle configuration 4x2; I5X 13.5-tonner; I6A Flatbed chassis; I6X Rear axle air suspension; J1A Combination instrument 10.4 cm; J1O Digital tachograph, 2nd generation, ADR; J1S Tachograph manufacturer VDO; J2K Speakers, 2-way system; J3N Fleetboard Eco Support; J3V Truck Data Center 7; J5S Radio with USB port and Bluetooth; J8Y Preparation for Truck Data Center 7; J9D Pre-installation for toll collection; J9K Universal preparation for multimedia use; JKUR AdBlue tank relocated to right; JKVJ Main fuel tank relocated from left to right; K0G Plastic tank 180 l, left; K3S AdBlue tank 35 l; K5M Lockable tanks; K5Q Strainer for fuel filler neck; K5S Protective cap for AdBlue dosing system; K7L Exhaust system, tailpipe towards center of road; L0A Lighting requirements according to UN-R 48.06; L0Y Rear light cable set, extended; L1C LED daytime running lights; L1H Fog lamps, halogen; L1Y LED light package, front, with white indicator lenses; L1Z Indicator lenses, white; L2H Flashing side marker lights; L2P LED outline marker light; L3E 1 working light, upper rear panel; M0Q Noise regulations according to UN-R 51.03 Level 2; M2A Engine OM936, R6, 7.7 l, 175 kW (238 HP), 1000 Nm; M4X Engine version Euro VI, E; M5V High performance engine brake; N0S NA MB 60-2c, MPA low, nominal speed; N6K Transmission lock for PTO; O1X CLCS TL function integration in ASAM; O2L GU vehicle with... Hsdpfx Aoyfr S Ieirsw

Condition: new, functionality: fully functional, power: 3.6 kW (4.89 HP), fuel type: gasoline, color: green, empty load weight: 713 kg, mast type: other, brakes: other, Year of construction: 2026, Equipment: low noise, The TICAB BS-2000 Bitumen Emulsion Sprayer is a professional, high-capacity asphalt spraying machine for road construction, road maintenance, pothole repair, crack sealing, surface dressing, asphalt bonding, and tack coat application. With 2000 liters tank capacity, it delivers uniform and precise bitumen or asphalt emulsion application, making it ideal for contractors, municipalities, paving companies, and industrial projects. Key Features: • Tank Capacity: 2000 L • Suitable for bitumen emulsion • High-precision spraying system for even asphalt and bitumen coverage Hsdpfx Aijx Uqbzsrjw • Mobile, trailer-mounted, and easy to operate • Durable construction for long-term reliability and heavy-duty use • Manufactured by TICAB – trusted European asphalt and road maintenance equipment brand • Ideal for municipal roads, highways, streets, parking lots, driveways, industrial areas, and airport surfaces Applications: • Municipal roads, highways, parking areas, driveways, and industrial surfaces • Road construction and asphalt repair • Asphalt bonding layer before paving • Pothole patching and crack sealing • Surface dressing and resurfacing Why Choose TICAB BS-2000: The TICAB BS-2000 combines professional performance, precision, and efficiency, making it the perfect choice for contractors and municipalities seeking reliable bitumen and asphalt spraying machinery for large-scale and medium-scale road repair, paving, and maintenance projects. Contact now for price, delivery, and technical specifications. Available for immediate dispatch!

Condition: new, functionality: fully functional, gearing type: other, color: green, axle configuration: 1 axle, emission class: none, brakes: other, Year of construction: 2026, Equipment: low noise, TICAB Bitumen Emulsion Sprayer – 200 L | Professional Asphalt Repair Equipment TICAB Bitumen Emulsion Sprayer 200 L is a reliable and efficient solution for road maintenance, asphalt repair, pothole patching, crack sealing preparation, and surface dressing. Designed for professional use, this bitumen sprayer ensures uniform application of bitumen emulsion, asphalt emulsion, tack coat, and bonding agents, significantly improving adhesion and extending pavement service life. Key Advantages: • Tank capacity options: 200 liters • Suitable for bitumen emulsion • Precise spraying system for even and controlled application • Ideal for road repair companies, municipalities, contractors, and utility services • Compact, mobile, and easy to operate • Reduces material consumption and labor costs Hsdpfx Aox Uwp Eoirjw • High-quality components for long service life • Manufactured by TICAB – proven European road equipment manufacturer Typical Applications: • Pothole repair and patching works • Crack sealing preparation • Asphalt bonding layer before paving • Surface dressing and maintenance works • Road, parking lot, driveway, and industrial area repairs TICAB Bitumen Emulsion Sprayers are a cost-effective choice for companies looking for professional asphalt maintenance equipment with excellent performance and durability. Contact us for price, availability, delivery options, and technical details.

Condition: new, functionality: fully functional, gearing type: mechanical, color: green, emission class: none, brakes: other, suspension: other, Year of construction: 2026, Equipment: fog lights, low noise, TICAB Bitumen Emulsion Sprayer – 500 L | Professional Asphalt Repair Equipment TICAB Bitumen Emulsion Sprayer 500 L is a reliable and efficient solution for road maintenance, asphalt repair, pothole patching, crack sealing preparation, and surface dressing. Designed for professional use, this bitumen sprayer ensures uniform application of bitumen emulsion, asphalt emulsion, tack coat, and bonding agents, significantly improving adhesion and extending pavement service life. Key Advantages: • Tank capacity options: 500 liters • Suitable for bitumen emulsion • Precise spraying system for even and controlled application • Ideal for road repair companies, municipalities, contractors, and utility services • Compact, mobile, and easy to operate • Reduces material consumption and labor costs • High-quality components for long service life • Manufactured by TICAB – proven European road equipment manufacturer Typical Applications: • Pothole repair and patching works • Crack sealing preparation • Asphalt bonding layer before paving • Surface dressing and maintenance works • Road, parking lot, driveway, and industrial area repairs TICAB Bitumen Emulsion Sprayers are a cost-effective choice for companies looking for professional asphalt maintenance equipment with excellent performance and durability. Contact us for price, availability, delivery options, and technical details. Hjdpfx Aiox Uql Herjw

Condition: used, machine/vehicle number: WKESD000000366927, empty load weight: 4,560 kg, maximum load weight: 34,440 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2007, suspension: air, tire size: 385/55 R22,5", tire condition: 50 %, Year of construction: 2007, The vehicle is currently in transit to stock. The images are archive images. The vehicle may still be in use. - 3-axle semi-trailer for general cargo transport - #Chassis - Longitudinal members – container chassis – fixed design - No front or rear extension - 13.60 m chassis - Gross vehicle weight, permitted / technical: 39000 kg - Payload, permitted / technical, approx.: 34140 kg - Unladen weight (basic version), approx.: 4560 kg - Fine-grain steel welded construction, fifth-wheel plate with replaceable 2" kingpin - Container fittings: - 1 x 40 ft with tunnel - No front extension - 1 wheel chock with holder - Aluminium side underrun protection - Galvanised steel rear underrun protection - Half-shell mudguards - 2 anti-spray mudflaps - Rear impact protection - 1 ADR plate - #Axles and suspension - SAF disc-brake axles - #Wheels and tyres - 385/55 R22.5" Hsdpfe Af I R Esx Airow - Steel wheels, factory silver finish - #Electrical system - 24 V, multi-chamber lights, rear and brake lights, yellow LED side marker lights - 2 white front position lights - 2 white/red rear outline marker lights - 2 x 7-pin and 1 x 15-pin tamper-proof sockets at the front, without connecting cable - #Paintwork - Painted chassis - Landing legs, black-coated - Final character count: to be verified

Condition: used, functionality: fully functional, machine/vehicle number: 33528, mileage: 1,79,900 km, power: 315 kW (428.28 HP), first registration: 02/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6d, suspension: steel-air, loading space volume: 13.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Hsdps Af Ux Usfx Airew Further comparable vehicles are available upon request. Chassis design for ADR, ADR type class FL and OX (including EX/II, EX/III and AT), weight variant 28 t, engine OM470, disc brakes, Active Brake Assist, ABS, ASR, ESP, lane keeping assist, hill start assist, reinforced front axle 9 t 3-leaf, air-sprung rear axle, rear axle 13 t with differential lock, steerable and liftable 8 t trailing axle, regulated water pump, gearbox lock for auxiliary drive, daytime running lights, trailer coupling Ringfeder (D40), tires: front axle 385/65R22.5, rear axles 315/80R22.5, fuel tank 290 liters + 60 liters AdBlue, length/width/height/mm: 9,100/2,550/3,550 Cab: ClassicSpace (width 2300 mm, tunnel 320 mm), tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system, driver comfort suspension seat, passenger functional seat, multifunction steering wheel, reversing warning system combined with hazard warning lights, radio-Bluetooth with navigation, digital tachograph VDO, trip computer, 24 V socket in the passenger footwell, circuit breaker, battery main switch, pre-installation for toll collection, air conditioning, cruise control, attention assist, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacons on the cab roof, sun visor Body: ADR with piston tank coding L4BH, total volume approx. 13.5 m³, usable volume sludge chamber approx. 11.5 m³, water chamber approx. 1.0 m³, tank wall thickness 6 mm, hydraulically opening full-height hatch with pneumatic hammer head lock (galvanized) and a suction connection at the bottom and top, suction connection for trailer operation at the rear left, 1 x piston lock, piston with 2 piston seals and seal pressure regulation, tank content indicator - scale division every 500 liters, tank content indicator of the water chamber made of plexiglass tube on the right side, impact protection for the tank at the rear, vacuum pump CVS Vacustar W1300L (1200 cbm/h) hydraulically driven, over-suction protection by 2 PVC balls, centrifugal separator with stainless steel brush insert and a stainless steel protective filter in front of the vacuum pump, high-pressure pump Speck NP 25/50-120 (approx. 50 l/min at approx. 120 bar) hydraulically driven, manually operated small winch with 40 m (designed for 60 m) HD hose DN13 and spray gun, filling device for the water chamber consists of a Storz-C coupling, 4 x LED work lights 2x on the right and 2x on the left on the tank, 1 x LED work light detachable and swiveling with 20 m cable, control cabinet made of stainless steel with louvered panel mounted on the right rear, discharge flap (aluminum), hose box on the right and left (aluminum), additional hose rests for hoses running around the tank welded to the tank lid, lockable plastic toolbox, waste container mounted at the rear (galvanized steel), ladder bracket and aluminum ladder, burst disc with pressure relief valves on the tank, 2 fire extinguishers, 15 m grounding cable, rotating beacon, trailer suction line, trailer hydraulics.

Condition: used, mileage: 1,82,692 km, power: 125 kW (169.95 HP), first registration: 02/2000, fuel type: diesel, fuel: diesel, Mercedes Benz 1317 KO *Sweeper *Road cleaning vehicle - In top condition! - Self-propelled working machine! Hodpszmc E Tjfx Airow • Right-hand drive • Engine: 125 kW OM 409 diesel • Engine displacement: 4,249 cm³ • 7-speed manual transmission • Rotating beacon at the front and rear • Differential lock • Electric windows • Seat heating • 2 sweeping brushes, at the front and on the right • Leaf collector at the rear • Spray system at the front • Tire size: 10 R22.5 • Tire tread: 14/12 / 16/14 / 17/15 mm • Permissible gross vehicle weight: 14,000 kg • Unladen weight: 8,550 kg • Payload: 5,450 kg - German vehicle - TÜV/emission test/safety check: on request and for an additional charge: new! Subject to errors and prior sale! = Further information = Year of construction: 2000 Unladen weight: 8,550 kg Payload: 5,450 kg Permissible gross vehicle weight: 14,000 kg