Used Steel Bending Machine for sale (73,741)

Condition: good (used), pipe diameter (max.): 30 mm, input voltage: 380 V, Tube bending machine Brand: Margua Model: CEM-30 Maximum bending capacity: 30 x 1.5 mm Maximum square tube capacity: 25 x 25 x 1.5 mm Maximum center radius: 115 mm Minimum inner radius: 25 mm Motor power: 4 HP (Three-phase 380V) Tube accessories: - Dies for 22mm tube - Dies for 28mm tube - Dies for 20.5mm tube Drive and control: Electromechanical with angle selector and mechanical stop. Bending system: Die-forming draw bending (with or without mandrel). Chsdpsz Dti Iefx Agmsd

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: M961287, overall weight: 17,000 kg, Herber 127 CNC in very good condition. The control system has been upgraded to "WinBoHerber". Year of manufacture: 1996 Capacity: Ø 127 x 5 mm Radius: min./max. 80/400 mm Bending speed / repeatability: 40°/s; ±0.1° Mandrel length: 4,000 mm Weight: 16,000 kg Machine dimensions: 7.0 x 2.2 x 1.8 m Motor: 40 kW Longitudinal feed: 900 mm/s Tolerance range: 0.05–0.1°/mm Tools are also included in the scope of delivery. Ø 50, radius 101.6 mm, folding smoother. Csdpfxj Aax Uzs Agmjhd On request, we also offer installation and training.

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 265040200001, Technical specifications available upon request. Codpfxozd Hhmo Agmjhd

Condition: used, sheet width 3000 mm plate thickness 6 mm pre-bending 4 roll diameter 205 mm total power requirement 5 kW weight of the machine ca. 3,7 t dimensions of the machine ca. 4,0 x 1,4 x 1, 5 m Roundo 3-roll plate bending machine, featuring: Chedpj Ahkinsfx Agmjd - Hydraulic drop-end bearing and remote control - Conical bending attachment: a device for rolling cones and funnels.

Condition: as good as new (ex-display), Year of construction: 2025, Used horizontal bending machine Digibend 400 CNC with back gauge L=1250 and 22" LCD monitor with touchscreen, USB ports and integrated DigiSoft software - demonstration machine - Machine is powered on and can be inspected by appointment! Technical data: Year of manufacture: 2025 Max. bending force: 400 KN / 40 tons Max. stroke: 245 mm Max. working speed: 9.6 mm/sec Min. working speed: 4.8 mm/sec Return speed: 62 mm/sec Average speed: 35.8 mm/sec Programmable programs / Programmable sequence bends: 50+5 (punching) Number of single bends / sequence bending: 16 Dimensions of the work table: 580 x 1230 x 925 (H) mm Chjdpeyw Rxfofx Agmjd Tool fixing holes in the work table: 4 x Ø 80 mm Working height: 925 mm Oil tank volume: 40 l Motor power: 5.5 hp / 4 kW Connections: 380 V / 50 Hz Bending height: 200 mm Extra-high bending height: 400 mm Cutting max. capacity 40 kg/mm (mild steel): H=150 x 10 (thickness) Punching max. capacity 40 kg/mm (mild steel): Ø 30 x 10 (thickness) Straightening: 200 mm Two-die bending: Ø 60 mm Rotational bending: Ø 50 mm Automatic CNC back gauge: 1250/2000 mm Weight (approx.): 700 kg Dimensions: 580 x 1230 x 1150 mm The following tools are included in the price: - Die holder extension H. 190 L. 85 mm – for DIGIBEND 160-360-720 -- 400-800 - Center pin (multifunction pin) D. 80 – H. 220, head milled for Digibend 160-360-720 -- 200-400-800 - Bending insert R. 5 – H. 200 mm – DIGIBEND - Single V-die, 80 mm. H. 200 mm. for DIGIBEND

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Bending speed 20 °/sec total power requirement 2,4 kW weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Chodpfxexcuiio Agmod Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Since 2004, DAVI has revolutionised the way sheet metal rollers are wired (similar to ‘fly-by-wire’ technology in the aerospace, FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified maintenance work more easily More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Csdpjz Dxpmjfx Agmshd Permanent lubrication technology The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust - Hardened rollers •Excellent heat tre...

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1980, operating hours: 15,034 h, machine/vehicle number: 1.500, roller (bottom) diameter: 220 mm, roller (top) diameter: 300 mm, working width: 3,000 mm, sheet thickness (max.): 8 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. sheet thickness: 8 mm Max. pre-bending thickness: 8 mm Max. working width: 3,000 mm Number of rollers: 4 Number of driven rollers: 2 Diameter of upper roller: 300 mm Chedpfxjz Niq Tj Agmod Diameter of lower rollers: 220 mm MACHINE DETAILS Drive: Hydraulic Control: Conventional Power: 6 kW Operating hours: 15,034 h Dimensions & Weight Dimensions (L x W x H): 7,700 x 2,300 x 1,700 mm Unladen weight: 10,000 kg

Condition: good (used), Year of construction: 2010, 1 used pipe bending machine Manufacturer: Tubobend 48 Year of manufacture: 2010 Technical data: - Bending capacity - Pipe with 45 kg/mm²: Ø 6 - 48 mm - Solid material up to approx. 30 mm - Max. bending angle 180° - Bending radius 2 x D - Drive: 400 V / 1.5 kW - Space requirement: approx. W 7500 x H 1400 x D 1000 mm - Weight: approx. 600 kg - With fine adjustment for bending angle - Mandrel bending device, 6.0 m, with hydraulic retraction - Bending tools Equipped with: - Torsion device - Deburring station - Hydraulic mandrel retraction Cedpfx Ago Ahwf Usmjhd - Lubrication - As well as 6 tool sets and the corresponding mandrels

Condition: good (used), GATTI HYDRAULIC BENDING MACHINE 4000X80 TON, 4 AXES, 200 mm RECESS. DIMENSIONS 440X180X270(h) cm, WEIGHT: 7100 KG Chjdpevzyzfsfx Agmjd

Condition: used, operating hours: 16,158 h, Rebar Bending Machine, MEP FOCUS 12 Rebar Bending Machine, Used Machine Manufacturer: MEP S.p.A., Italy Model: FOCUS 12 Year of manufacture: 2006 Overall dimensions: MEP bending machine: Width: 3660 mm Depth: 1620 mm Height: 2350 mm Decoiler: Width: 4820 mm Depth: 1980 mm Cedpfx Aezaq Dlsgmehd Height: 1460 mm Bending capacity: 6–12 mm Accessories: 5 pcs wire coils 1 pc 8 mm bending tool Programmability: One of the major advantages of the "Focus" series is that the bending angles can be set via an electronic control panel. There is no need to manually adjust mechanical stops as on older Hungarian machines. This significantly speeds up production when, for example, 100 identical stirrups need to be bent. The control system retains its programs even if the machine remains without power for months or even years. The software runs on a dedicated computer. MEP provides full service and technical support for all of its machines, regardless of their year of manufacture.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 61108042022, 5-axis CNC tube bending machine BLM Dynamo ELE - MR200 Serial number: 61108042022 Year of construction: 2008 Machine weight: 1850 kg BLM bar loader BLM CARM 7 Serial number: 340380106175 Year of construction: 2008 Codpfjqy E R Tox Agmjhd Weight kg: 650 With conveyor belt Without protective grid

Condition: used, Offered for sale is a hydraulic three-roll plate bending machine. Bending width: 3000mm. Pre-bending capacity: 31mm at 3000mm plate width. Reference material: Steel with yield strength of 240N/mm². Pre-bending diameter at specified capacity: greater than 630mm. Control system: Separate control panel with joystick control for roll and support adjustment. Equipped with hydraulically adjustable bottom rolls, overhead plate support, side plate support and hydraulically operated drop-end bearing. Inspection possible by arrangement. Cjdo Ad Nq Ujpfx Agmjhd

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Codpfx Aeu Ibvuegmshd Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Accessories: -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices *

Condition: good (used), functionality: fully functional, Year of construction: 2005, SIMASV CHV - Type 3360 Notching Machine - *Brand:* SIMASV SRL - Thiene (VI) Italy - *Model:* CHV - *Type:* 3360 - *Serial Number:* HV3360 / 1575 - *Year:* 2005 - *Power:* 3 kW - *Power Supply:* 400V / 50Hz - *CE Marking:* Yes The 3360 version from SIMASV features: - *Shafts Ø 60 mm* (hence the 60) - *Rollers Ø 155-160 mm* - *3 motorized rollers* Csdpfxj Ahrdis Agmjhd - *2 hydraulically controlled side guide rollers* (the 2 arms on the sides) - *Capacity:* Tube Ø 60x3 mm / Flat bar 100x15 / Angle iron 60x60x6 / I-beam 80 approximately – it is a small/medium-sized machine - *Weight:* ~ 600-700 kg - *Control:* Foot pedal, digital display of stroke length, hydraulic descent.

Condition: new, functionality: fully functional, Year of construction: 2026, tube bender R 1 ZOPF - without bending tooling - with foot pedal and emergency stop Chsdpfxsfiqnte Agmed - without tooling - control unit - 100 programs of 9 bends each - precise electronic control of C-shaft - manual and automatic bending mode - bending angle and springback angle are programmable by means of a microprocessor - rapid engagement and disengagement of the tooling - scale for counterbending holder - movable - dimensions 930x410x1000 mm - weight 280 kg - motor 1,5 Kw - 220 volt single phase - bending radius R55 - R340 mm - bending capacity of tube Ø 5 mm to 50 mm - max. Bending angle of 210 °

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale and available immediately: Codpfez D Suvsx Agmohd Used PICOT rolling machine Year: 2019 Type: RCS235-30 3 motorized rollers Maximum length: 3100 mm Maximum rolling thickness: 8 mm Maximum nibbling thickness: 6 mm Roller diameter: 235 mm Digital roller position display

Condition: used, Year of construction: 1995, Max. bending capacity: 300 kN (30t) Pressure adjustable from 0-300 kN Tool height: 300 mm Biegleistung:140 x 20 mm at V125; 200 x 18 (19) mm at V200 Automatic and manual mode possible Miscellaneous accessories and operating manual Weight: approx. 700 kg Chedpfo Aaz U Dox Agmod

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, pressing force: 120 t, ram plate length: 4,300 mm, Equipment: CE marking, SAFAN 120-ton, 4300mm CNC Edge Press/Folding Machine Used bending machine / press / edge press Brand: SAFAN Model: [Model number missing in the original text] Year: 2002 Press force: 120 tons Bending length: 4300mm CNC control with touchscreen Cjdez It Sqepfx Agmehd Front supports Operating manual Electrical and hydraulic diagrams Rear safety gate Side safety gates

Condition: used, functionality: fully functional, machine/vehicle number: D06L/7646, Offer Number: D06L/7646 Machinetype: wire and strip bending machine Codpfx Aowi S Ncsgmohd Make: MRP Type: UB4 Constr. year: dia. range: 1-4 mm width of band: 20 mm output pieces/min: 80-150 feeding length: 240 mm Location: In our warehouse

Condition: good (used), functionality: fully functional, Year of construction: 2010, control type: manual, actuation type: hydraulic, number of rollers: 3, sheet thickness (max.): 5 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 1,100 kg, Equipment: centralized greasing system, cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, Bending length: 1.050 mm Cjdpfx Agjz Tdg Dsmshd Bendingcapacity: 5.0 mm Steel 3.0 mm Stainless steel 6.0 mm Aluminium Upper roll: Ø130 -> 75 mm Lower rolls: Ø130 mm Featured with: - Hydraulic drop end - 3-rolls driven - Hand-footcontrolled

Condition: used, CNC press brake WEINBRENNER, type EGP 80 Die-bending machine (DEFECTIVE) Cjdpfx Agsz A Ia Ssmjhd Serial No. 1257G, Year of manufacture 1991 Pressing force 80 tons Working length 1300 mm Stroke 260 mm with Cybelec DNC 94 PS control system with back gauge Own weight 8800 kg without tools, tooling system probably TRUMPF Machine is not functioning, control system does not boot up. The parameters are likely lost. Weight 7300 kg (on the nameplate) Weight 8800 kg (weighed on the crane) in good condition

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: HEB IPE section bending roll, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, shaft diameter: 200 mm, roller diameter: 650 mm, bending radius (max.): 1,000 mm, pipe diameter (max.): 250 mm, overall weight: 27,000 kg, input voltage: 3,80,440 V, input frequency: 5,060 Hz, Equipment: CE marking, documentation/manual, emergency stop, hardened rollers, Profile bending roll hydraulic model AR200, year 2008 make MG Italy Capacity bending chart and photos in enclosed -Technical data: Output shafts size 200 mm -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. Chsdpfxsz Dkr Hj Agmod -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. -electric 30 Kw on the hydraulic power unit- voltage 380/50 -Digital position readout on the bending rolls -Manuals and schematics all available along with the machine. -Machine delivered in working condition. CAPACITY CHART IN ENCLOSED MG MODEL AR200 SECTION BENDING ROLL

Condition: ready for operation (used), functionality: fully functional, Pipe bending machine from Amga. Includes tools. Chsdpsz Szfhsfx Agmsd

Condition: excellent (used), Industrial Flourer / Breadcrumb Coating Machine – Stainless Steel Automatic industrial flourer / breadcrumb coating machine, designed for the continuous and uniform application of flour, breadcrumbs, or other dry coatings onto food products before subsequent frying, baking, or freezing operations. The equipment incorporates a continuous conveying system that guides the product through the coating area, where the dry ingredient is distributed over its surface. This type of machine allows coating both the top and bottom of the product, depending on the configuration and the material used. MAIN FEATURES - Type: Industrial flourer / breadcrumb coating machine - Automatic application of dry coatings - Continuous operation - Product conveying system - Hopper / tank for flour or breadcrumb material - Controlled coating distribution - Coating of the product surface - Recovery and recirculation system for excess material, depending on configuration - Adjustment of product flow and coverage - Construction primarily in stainless steel - Open design for easy cleaning and inspection - Mobile structure on wheels - Electrical control panel - Guards on moving parts - Designed for integration into industrial food preparation lines PROCESS The product enters continuously via the conveyor belt and passes through the dry coating application area. The flour, breadcrumbs, or breading mix is distributed around the product to achieve the most uniform coverage possible. Excess material can be separated from the product and returned to the coating circuit, depending on the installed configuration. Once floured or breadcrumb coated, the product automatically continues to the next operation. It can be integrated with: Formers Pre-dusters / pre-flouring machines Batter applicators Coating machines Systems for removing excess coating Continuous fryers Ovens IQF freezing tunnels Coolers Packaging lines APPLICATIONS Especially suitable for meat industries, fish processors, manufacturers of breaded products, pre-cooked foods, and ready-made dishes. Depending on its configuration, it can be used for: Nuggets Hamburgers and formed products Chicken fillets Meat products Fish and seafood Croquettes Vegetable products Other breaded or floured foods The machine allows for the automation of the dry coating application, improves its uniformity, and maintains a continuous flow of product to the subsequent processing stages. Chsdpfx Agjzxwycemod Machine available for inspection. Additional technical information, working width, production capacity, dimensions, additional photographs, or videos can be provided upon request.