Used Suction Sweeper for sale (2,935)

Condition: good (used), Year of construction: 2001, Lifting capacity: 220 kg Width: 560 mm Height: 1400 mm Bedpfx Anjy Tiwlodedi Depth: 450 mm Net weight: 45 kg Condition: good, second-hand

Condition: used, operating hours: 500 h, functionality: limited functionality, fuel type: electric, drive type: Elektro, Sweepers Condition: Not operational Technical condition: poor Bdsdpfx Anjy Si T Rsdoi Battery voltage: 24V

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1170x560x570 mm Weight 55 kg Total power requirement 2,2 kw Bsdovz Elcjpfx Andedi

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 920x2100x2150 mm Weight 300 kg Total power requirement 5,5 kw Bedpsvz Erpsfx Andsdi

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 143302809152, power: 33 kW (44.87 HP), fuel type: diesel, sweeping width: 2,270 mm, permissible axle load (axle 1): 1,500 kg, permissible axle load (axle 2): 1,500 kg, No reserve – guaranteed sale to highest bidder! TECHNICAL DETAILS Bjdpoy N Rhqjfx Andjdi Maximum sweeping width: 2,270 mm MACHINE DETAILS Fuel type: Diesel Engine: Yanmar Drive: 4WD Permissible gross weight: 2,500 kg Permissible front axle load: 1,500 kg Permissible rear axle load: 1,500 kg Power: 33 kW Fresh water tank: 180 l EQUIPMENT Additional hydraulic valve

Year of construction: 2022, condition: new, Lundberg WasteTech 400 All-in-one Unit for Trim Edge Extraction Maximum extraction capacity: 6,000 m³/h (3,540 CFM) Maximum pipe diameter: 315 mm (1’-1”) Maximum extraction distance: up to 30 m (100’) Dimensions (LxWxH): 2615 x 1300 x 3330 mm (8’-7” x 4’-3” x 10’-11”) Weight: 615 kg (1,356 lbs) Extraction fan power: 15 kW (20 HP) Power connection: 3-phase, 230-460V, 50-60 Hz Noise level: 68-72 dB(A) Colour: blue, RAL5010 Including the following accessories: Antistatic unit M5/M6 filter incl. pressure monitoring sensor WT400 frequency converter Bag level sensor TubeBag System (continuous bag) Bdedpfxoy Sbc Rs Andsi According to the manufacturer, simultaneous extraction from up to 24 trim edges is possible. The unit is in as-new condition and was only operated for a few hours. On-site inspection is possible. Original purchase price of the system approx. €65,000 incl. accessory options.

Condition: new, Year of construction: 2026, The side brush for the ZP7500 CORMAK sweeper is a practical additional accessory that significantly improves the machine’s performance. It is responsible for thoroughly sweeping hard-to-reach areas—along walls, shelves, curbs, and in corners where the main brush cannot reach. As a result, surfaces are cleaner after just one pass, without the need for touch-ups. Using a side brush also increases the sweeper’s working width, which directly translates into higher productivity. In practice, this means faster cleaning of large areas such as warehouses, yards, or parking lots. The solid construction and wear-resistant bristles ensure a long service life, even under intensive use. The brush is designed for demanding conditions—it effectively collects both fine dust and larger debris such as sand, leaves, or gravel. The brush construction is adapted for operation in challenging industrial environments—resistant to mechanical damage and heavy use. Installation and removal are quick and intuitive, making replacement or servicing easy without downtime. Key benefits: precise sweeping along edges and in corners increased working width and higher efficiency effective collection of both fine and larger debris reduced manual labor and fewer passes required durable, wear-resistant bristles Bodpsyvp Ngsfx Andjdi quick installation and convenient operation

Condition: new, Year of construction: 2026, The air filter for the ZP7500 sweeper is a key component of the filtration system, responsible for effectively capturing dust, fine particles, and small debris generated during operation. Its use significantly reduces airborne dust, resulting in improved operator comfort and a cleaner working environment. Bdedpfsyvp Tfsx Andsi During sweeping, contaminants are not only collected by the brushes but also drawn into the machine along with air. The air filter ensures these particles are effectively trapped, preventing fine dust from being released back into the surroundings. In practice, this means more efficient and “dust-free” cleaning—especially important in warehouses, production halls, and enclosed spaces. A large filtration surface area and properly structured filter material allow for the effective capture of even very fine particles. Modern sweepers often use panel filters, which offer high performance and ease of use—frequently equipped with shaking or cleaning systems that help maintain consistent efficiency. The filter also serves a protective function for the machine’s components—it prevents contaminants from entering the suction system and other working parts, reducing the risk of failure and extending the machine’s lifespan. An additional advantage is easy access and quick replacement, allowing the machine to be kept in optimal condition without unnecessary downtime. Regular inspection and cleaning of the filter are key to maintaining maximum sweeper performance. Key benefits: effective reduction of dust during operation improved air quality in the working environment high efficiency in filtering fine particles protection of machine components from contamination extended lifespan of the sweeper easy maintenance and quick replacement The air filter is an essential component for ZP7500 sweeper users who expect maximum cleaning efficiency while maintaining high comfort and safety—especially in dust-intensive environments.

Year of construction: 2002, condition: good (used), Load capacity: 125 kg Lifting motor with chain hoist, manufactured by Demag. Operated via HUBFIX. Width: 450 mm Height: 360 mm Depth: 220 mm Weight: approx. 12 kg Condition: good, second-hand Bdodpfx Anozba Txodei

Condition: used, mileage: 74,053 km, power: 375 kW (509.86 HP), first registration: 11/2015, overall weight: 35,000 kg, fuel type: diesel, color: white, axle configuration: 8x2, maximum load weight: 11,625 kg, empty load weight: 23,375 kg, tire size: 385/55/315/70 R 22,5, next inspection (TÜV): 11/2026, wheelbase: 4,500 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 16 m³, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, low noise, power assisted steering, seat heater, Vehicle location: Bovenden, with house, 1 comfort seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, Telligent gearshift, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, lift and lower function, differential lock, work lights, rotating beacon, storage compartment, leaf-air suspension, connections for air and light for trailer hitch, last axle hydraulically steered, sunroof, remote control, green environmental badge. Bodpfxszbvdas Andedi Wheelbase: 4500 mm, Body: Wiedemann Super 2000 body, Capacity (sludge), 6,000 l (service water), 16,000 l (total), with water recovery, radio remote control 9t/7.5 tons front axles, disc brakes on front and rear axles, vacuum pump type: KW 4000, renewed in 2023 (1801), Aerokill system, hydraulic winch (350 kg) & rescue eye, meter counter for hose lengths, reversing camera, access ladder, filterless water treatment (sedimentation/centrifugal principle), stainless steel water tank (V2A, multi-chamber system) and an integrated fresh water system (approx. 800 - 1,000 l), high-pressure pump: Uraca P4-45-70, (1.025), large HD hose reel: approx. 180 m high-pressure hose DN38, a small HD hose reel: approx. 70 m high-pressure hose DN13, and a DUO coupling for power reduction, external transfer pump (rotary lobe pump Jurop VL14) for work with large water volumes. Pump output: 1,400 l/min, 2 bar, 7 kW, wardrobe with heater, hand washing basin (hot/cold). ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Year of construction: 2017, operating hours: 5,405 h, functionality: fully functional, mileage: 40,637 km, power: 72 kW (97.89 HP), first registration: 08/2017, overall weight: 7,050 kg, fuel type: diesel, color: orange, axle configuration: 4x2, operation weight: 4,600 kg, empty load weight: 4,600 kg, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro6, suspension: steel, Equipment: ABS, additional headlights, air conditioning, tail-lift, self-propelled cleaning machine: + Dulevo + 3000T Revolution EU6 + First registration: August 29, 2017 + 40,637 total kilometers; 5,405 total operating hours + 10,562 sweeping kilometers; 2,521 operating hours + 4-cylinder VM diesel engine, 2970ccm; 98 hp, Euro 6 (Stage IV/(EU) 64/2012A) + Hydrostatic transmission (max. speed 40 km/h) + Handheld suction hose + Dust filter + Fresh water tank with dust suppression nozzles + High-dumping system + Brushes on the left/right and center roller, individually controllable + Front brushes on the left/right, swiveling; direction of rotation can be changed + Warning lights + Central lubrication system + Rear-view camera + Radio/CD player + Radio communication system + 500cm x 160cm x 267cm (l x w x h) + Unladen weight: 4,875 kg; permissible gross vehicle weight: 7,050 kg Municipal vehicle from first owner Bdodozcfndopfx Andei Receive all new vehicle listings by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: good (used), Year of construction: 2001, Lifting capacity: 500 kg Horizontal/vertical, swivelling. Height: 1300 mm Width: 1150 mm Depth: 1150 mm Net weight: 120 kg Condition: good, second-hand Bdedjy Tv Anspfx Andji

Condition: good (used), Year of construction: 2016, Esta welding fume extraction system SRF K10 FM IFA W 3 230 Volt, max. 950 m³/h, with automatic filter cleaning, suction nozzle 3 meters. Bsdpjy Uch Tjfx Andedi

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 240900085, overall weight: 410 kg, total length: 1,000 mm, total height: 2,150 mm, space requirement width: 1,350 mm, Filter and extraction unit with automatic cleaning. Suitable for fume extraction during laser, plasma, and oxy-fuel cutting, blasting, welding, grinding, and powder coating. Year of manufacture: 9/2024 Model designation: 5201053763420 Bsdpfszww T Tex Andsdi Serial number: 240900085 Motor: 3 kW - 400 V Number of filter cartridges: 3 Raw gas inlet: 250 mm Raw gas outlet: 300 mm Width x Depth x Height: 1,350 x 1,000 x 2,150 mm Weight: 410 kg Note: Excluding installation, commissioning, and transport. Subject to prior sale.

Condition: used, Year of construction: 2017, functionality: fully functional, overall weight: 620 kg, color: orange, Equipment: power take-off driven, Dücker FKM 2400 Sweeper Year of manufacture: 2017 620 kg Max. speed: 250/min Max. hydraulic pressure: 200 bar Bdsdpoy Ux A Tsfx Andsi PTO drive Lighting Three-point linkage Suitable for Unimog, for example

Condition: ready for operation (used), Year of construction: 2019, Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Bsdpfxjyvuvls Andodi

Condition: excellent (used), 22 kW engine Bedpfx Ajmnm E Sondodi Inlet 50cm Outlet 50cm Very good condition.

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) Bjdpfxjdrtals Andsdi each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: used, Year of construction: 2016, operating hours: 3,597 h, mileage: 66,228 km, fuel type: diesel, empty load weight: 18,000 kg, Operating hours: 3597, first registration: 06/23/2016, self-propelled. Standard basic equipment: Fan unit - fan drive hydraulically via the auxiliary drive located on the chassis, independent of the transmission (semi-hydrostatic drive) - hydraulic fan drive - hydraulic oil tank 50 l - engine compartment with noise-reducing material - fan exhaust duct leading upwards through the container front - hydraulic pump, single sweeping material container - sweeping material container (with rear flap and screen) and water tank made of 1.4003 chromium steel - engine compartment cladding made of normal steel - sweeping material container gross volume 6.5 m³ - sweeping material container floor made of chromium alloy stainless steel, 1.4301 - sweeping material container tilting angle approx. 55 degrees - dirt chute made of chromium steel, 1.4003 - inspection flap on the right and left - dirt water drain 4", A-coupling - air intake screen, manually foldable - 2 rear warning lights on the sweeping material container - air shut-off on the suction hose, pneumatically operated - multi-stage locking support, pneumatically operated - marker lights on the container rear, side marker lights - integrated water tank - preparation for rear suction hose boom or mounted on the roof - side marker lights. Sweeping material intake: Sweeping material intake, wear-resistant coating - coarse intake by tilting the suction nozzle - suction hose diameter 250 mm - disc brush, pushed - hydraulically driven disc brush, steel - disc brush, steel, diameter 500 mm, pulled - stepless speed control for disc brush - two robust, pivoting trailing wheels - automatic lifting of the sweeping units when reversing - work lights for sweeping unit. Roller brush: Roller brush suspension, pulled - brush length 1,300 mm, brush diameter 406 mm with plastic trim (chassis-dependent) - hydraulically driven roller brush - throw limitation apron for roller brush unit. Water system: Water tank volume approx. 1,554 l - water container made of chromium steel, 1.4003 with coating - water level indicator in the driver's cab - water filling device, Storz C (2"), right - manual water filling device, right and left - water pump, hydraulically driven - automatic water stop when the sweeping units are lifted - spray water connection, 3/4", rear right - water blowing system - electric water valves in the driver's cab - 2-jet nozzle bar, low pressure, front. Instrument panel and control panel: Bucher instrument panel, incl. 7" color display - ergonomic control unit, mounted on the driver's door, equipped with the main functions - display includes the following functions: water level indicator, operating hours and rear axle load - warning and control lights for rear axle load - control and regulation unit for regulating the brush pressure (brush relief), stepless speed control of the disc brushes - electric valves for water system, operation in the driver's cab - operation of the dirt container functions by means of a cable remote control from the driver's cab, but also possible from the outside - operation of the air intake screen, operation on the rear right of the vehicle - overload indicator for rear axle load, warning light in the display (optional). Bsdpfx Ansfy Am Ujdsdi

Year of construction: 2006, condition: good (used), Suction lifter Vertical lifting capacity 600 kg Support tube length: approx. 2.9m-3.5m Load capacity per suction cup 100kg Connected load: 400V/50Hz 3Ph./1.9A External dimensions: Width:2900mm Height: 1200mm Bedpfsu R Rp Njx Andsdi Depth: 280mm Weight: approx. 104kg

Condition: used, Suction collector Suction bell -used- ----- Technical data ----- Connection piece: 350 mm, Bodpeu R Tb Uefx Andsdi Spigots: 5 pieces, nozzle diameter: 2x160,2x100,1x120 mm

Condition: used, mileage: 1 km, power: 12 kW (16.32 HP), first registration: 01/2004, fuel type: gasoline, color: red, driver cabin: other, gearing type: other, Vehicle location: Bovenden, superstructure: lawn tractor 2 cylinder engine, cutting width: 1020mm, incl. accessories : snow blade, 2x mowing rotors, snow chains, 1x grass catcher, 1x salt spreader, 1x lawn aerator ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bodjvhg N Nspfx Andjdi - .

Condition: used, Year of construction: 1972, mileage: 1 km, power: 40 kW (54.38 HP), first registration: 01/1972, overall weight: 4,000 kg, fuel type: diesel, color: orange, driver cabin: other, gearing type: other, Equipment: had accident, Vehicle location: Bovenden, Bsdpfx Ajvhhdbsndedi superstructure: oldtimer sweeper articulated, not roadworthy ! Spare parts donor ! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, Year of construction: 2019, operating hours: 3,394 h, empty load weight: 4,000 kg, Operating hours: 3,394, First registration: 16/09/2019 Driving speed: 40 km/h - 4,000 kg gross vehicle weight Cab: Sound-insulated, low-vibration cab with entry on right or left, right-hand drive, air-suspended driver's seat, passenger seat, rotating beacon, reverse warning buzzer, engine RPM gauge, heater with 2-speed fan, heated windshield with 2-speed intermittent wiper system, radio/SD, work lights, seat belts for driver and passenger. Floor panels with metal grating, CAN View System with 7" color display showing all relevant data with integrated self-diagnosis system. Engine: VM engine D754 E6 (60D/14), 2,970 cm³, 4 cylinder, 62 kW @ 2,300 rpm, 270 Nm @ 1,350 rpm, Common Rail. Exhaust system: DPF & DOC with SCR urea system, AdBlue tank 15 l Suspension: Fully suspended with coil springs and shock absorbers front and rear. Tires: front 6.50 R10 / rear 225/75 R10 Brakes: Hydraulic dual-circuit brake plus hydrostatic rear brake, hydraulically operated parking brake. Sweeper container: Container made of DIN 1.4003 stainless steel, tipping height 1.50 m, tipping angle 45°. High-performance blower with a wear-resistant, self-cleaning impeller. Discharge chute on the container 200 mm. Bsdpfx Anjtuzqpsdedi Brush: 850 mm front brush (poly) with hydraulic drive, adjustable up to 120 rpm, 1,440 mm sweeping width per side, brush contact pressure and lateral swing angle independently adjustable via joystick, front and side collision protection. Suction duct: Continuously adjustable lifting and lowering suction duct on rigid wheels. Water tank: Fresh water tank with 152 l and water recovery tank with 250 l. Paint: Cab, side and rear covers, single-color white; chassis, fresh water tanks and container in grey. Toolkit includes grease gun, combination wrench, screwdriver set. Special equipment: - Right-hand drive (standard) - All-wheel steering - Wall-to-wall turning circle 4,600 mm - Air-conditioning with automatic climate control - Deluxe driver’s seat, heated with lumbar support - Upgraded radio with Bluetooth - Hands-free phone kit - Blind spot mirror - Heated left/right rearview mirrors - Rear-view camera system with integrated color monitor - Automatic central lubrication system (Interlube) - Folding LED rotating beacon (instead of standard) - Airport rotating beacon, strobe lights (CAA specifications CAP 168) - Optional mounting for 3rd brush available - Mounting plate & high-level work lights oriented to the right Location: 54595 Prüm

Condition: good (used), Clean air extraction system Bdjdsrb D Nepfx Andei Used machine, in good condition Images to follow mobil Jet 160, Connection 160, Fan 2.2 kW Air flow rate 1850 m³/h, 400 V