Used Susemihl Gmbh Maschinenfabrik for sale (68,613)

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: AU170124-01, APPLICATION AREA UP TO NOW: Positioning/handling of panels from L/W/H 1500mm x 1500mm x 12mm up to L/W/H 8000mm x 2500mm x 80mm EQUIPMENT: Traveling gantry with synchronized drive Vacuum lifter beam with automatically switchable suction rows, adjustable based on the respective workpiece length Schmalz vacuum generator with area suction grippers Clamp cartridges next to the suction cups ensure vacuum activation Z-lift of the suction spider via scissor guides Z-axis asynchronous motor, MoviDrive frequency converter, belt drive Interfaces for upstream and downstream stations Control system: Siemens S7-300 CONTROL CABINET: Iajdpfxsytphio Abcop Power supply, power, and control section with main switch, power supply unit, motor protection switches, automatic circuit breakers, power contactors, auxiliary contactors, Simatic S7-300 control system consisting of a CPU315F-2PN/DP, PN/PN coupler, 1 pc. Micro Memory Card, Ethernet interface, all necessary digital input and output modules, and terminals, fully wired. Fieldbus system: Profinet-Safe.

Year of construction: 2024, condition: like new (used), functionality: fully functional, System Overview Complete modular chamber furnace system for batch homogenising of aluminium extrusion billets, electrically heated with jet-heating, waste-heat recovery, and full automation. CE-certified (Machinery Directive 2006/42/EG). Scope of supply: 1× Preheating furnace (BSN 1607) — electric, jet-heating 2× Holding furnaces (BSN 1608, 1609) — electric, forced air circulation 2× Heat-exchanger furnaces (BSN 1610, 1611) — unheated, forced air circulation 1× Charging machine (BSN 1612) — electric/hydraulic 12× Charging racks (BSN 1614) Control cabinet with Siemens S7-1515F 2PN (Profinet) PLC and operator panel Pusher thermocouples for direct billet temperature measurement Key technical advantages: Jet-heating for fast, uniform billet heating (typically 3–4× faster than conventional convection furnaces) Integrated heat-exchanger furnaces for efficient waste-heat recovery — reduced energy consumption and operating costs Overtemperature operation possible — shorter cycle times with direct billet temperature monitoring Suitable for homogenisation and/or solution heat treatment / ageing Modular design — suitable for new installations and retrofits of existing lines Ideal for: Aluminium extrusion plants and casthouses seeking to optimise energy consumption, CO₂ footprint, and throughput. Further technical details available upon request (PDF with full specifications). Iaedpfx Abjyuvq Tecjp

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, BROWARY & DISTILLERIES Sp. z o.o. has been providing professional consulting, design, and implementation of beer and distillate production lines for many years. We produce private label products for our clients and automated drink dispensing systems. Iasdpfxsx Aky Ds Abcjp Our company’s strength lies in our highly qualified and experienced team of engineers, enabling us to offer comprehensive turnkey project execution. To date, we have designed and commissioned 28 craft breweries and 3 craft distilleries in Poland, produced over 200 private label craft alcohol brands for our clients, and installed 30 DRINK WALL automated drink dispensing systems in hotels and restaurants. We are pleased to offer you a used SALM brewpub brewery. Since 1924, SALM has been producing complete brewing systems. This brewery was manufactured in 2023 for a client in Bucharest and has only brewed 5 batches to date, which allows us to consider the offered installation as practically brand new! The brewery is in perfect technical and visual condition. Below is the full technical specification of the offered brewery: Annual production capacity: 1,100 hl of beer 1. Two-vessel brewhouse, 5.5 hl, stainless steel, A-frame design with Salm Brewmatic 02 computer control system – 1 unit. 2. Copper cladding on the mash tun and lauter tun’s cylindrical sections. 3. Stainless steel brewhouse platforms – 2 units. 4. External wort boiling kettle with atmospheric gas burner, powered by natural gas or propane – 1 unit. 5. Vapour condenser for brewhouse, mash, and lauter tuns, stainless steel, with built-in injection condenser and fan for odorless operation and DMS removal – 1 unit. 6. Two-roller malt mill – 1 unit. 7. Wort cooler – 1 unit. 8. Mains water chiller (for water above 10°C) – 1 unit. 9. Whirlpool – 1 unit. 10. Mobile beer pump – 1 unit. 11. Wort aeration system – 1 unit. 12. Oil-free air compressor – 1 unit. 13. Glycol cooling system – 1 unit. 14. Hot water tank, stainless steel, double-walled with PU insulation – 1 unit. 15. Brewhouse ladder – 1 unit. 16. UNI tanks, 11 hl, double-walled, 100 mm PU-insulated, built-in cooling jackets, stainless steel 1.4301, 1.0 bar, built-in CIP – 6 units. 17. TÜV certification for the above 6 UNI tanks, with a nameplate on each. 18. Serving tank for finished beer, 3.0 bar, capacity 10 hl, stainless steel 1.4301, PU foam insulated, water-jacketed, horizontal on a frame – 4 units. 19. Electronic temperature control for each UNI and serving tank – 10 units. 20. Control cable with protective hose and screw connection for each UNI and serving tank – 10 units. 21. Full set of piping and fittings for installation on a single surface – 1 set. 22. Set including 1 beer hose (22 m) with fittings and a mini-laboratory. The brewery has a type approval from the Central Office of Measures in Warsaw. On request, we can arrange transportation of the brewery from Bucharest to any country of your choice and handle installation. We will gladly send you more photos, a presentation video of the brewery, and a profitability calculation for running your own brewpub via email.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: WT 1104, total height: 3,421 mm, total width: 4,704 mm, total length: 9,550 mm, load capacity: 200 kg, construction height: 3,421 mm, Vacuum Turning Portal for Panels The turning unit offers two different "automatic" operating modes: I. Component is conveyed without rotation The component is only shifted laterally, aligned to the reference edge (zero line) of the machining center, and then fed further to the CNC machining center (BAZ). II. Component is conveyed with rotation The component is shifted laterally and rotated along its longitudinal axis before being fed further to the CNC machining center. Each function can also be manually controlled in "manual" mode. SPECIFICATIONS: Max. panel dimensions: LWH: 8000mm x 2500mm x 100mm Max. weight: 200kg Min. panel dimensions: LWH: 1500mm x 1500mm x 12mm Iodpfxsyta R Ue Abcjap The turning portal is equipped with a total of 24 vacuum suction cups, ensuring gentle handling of the panels. The panels are always lifted via suction, then either moved horizontally to the zero line of the machining center or additionally rotated 180° en route before being delivered to the reference edge. The rotational movement is monitored via absolute encoders; the lateral positioning is controlled by adjustable photoelectric sensors. Vacuum is generated by a blower. The roller table, measuring 8500 mm x 4300 mm with roller diameter 108 mm, is fitted with material-friendly rubber rings and is driven by a SEW gear motor. Control of the roller table is via frequency inverter, adjustable speed up to 45 m/min. GENERAL INFORMATION: The entire area is enclosed by fencing; the longitudinal side of the system is secured by two sliding doors, which are safety-monitored. An operator touchpanel (12") is integrated into the fence area. The installed PLC (Siemens S7-1500) is programmed with three modes: • Automatic operation • Manual operation • Maintenance operation Input signals, loading side: – Start roller table – Rotate yes/no – EMERGENCY STOP complete system Input signals, unloading side: – Start roller table – EMERGENCY STOP complete system System output signals: – EMERGENCY STOP complete system – Panel infeed confirmed

Condition: used, Year of construction: 2015, input voltage: 400 V, type of input current: three-phase, power: 8.68 kW (11.80 HP), input current: 21 A, input frequency: 50 Hz, We offer this used MAJA-Maschinenfabrik SAH 3000 L meat processing machine, year of manufacture 2015. Machine type: SAH 3000 L Serial number: I-45534 Year of manufacture: 2015 Phases: 3 AC Voltage: 400 V Frequency: 50 Hz Current: 21.7 A Power: 8.68 kW Refrigerant: R404A Refrigerant quantity: 10.0 kg Iasdpfeyrryxjx Abcop Max LP pressure: 16 bar Max HP pressure: 25 bar GWP: 3922 CO₂ equivalent: 3922 g If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: excellent (used), functionality: fully functional, Klöckner Ionon GmbH is a company specializing in plasma nitriding and coating technologies. The model designation S800/7000 refers to a specific plasma nitriding system (vacuum furnace) used for the surface hardening of steel components. Plasmanitriding Technology Dr. Böhm GmbH +2. Here are the typical technical features and applications for systems of this size: Technical Features (S-Series): Process: Plasma nitriding, plasma nitrocarburizing (to increase wear and corrosion resistance). System Type: Vertical or horizontal reactor (vacuum furnace). Dimensions (S800): The designation "800" generally refers to the usable chamber diameter (approx. 800 mm), while "7000" may refer to the system series or a specific height/volume. Functions: Precise control of the compound layer, suitable as pretreatment for PVD coatings. Iaedsytl Hhopfx Abcop

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Iajdpfxjyl Scmo Abcep Subject to prior sale

Condition: new, Year of construction: 2025, Horizontal Cartoner 60-ECO – Compact and Efficient Limited space is a common challenge in production environments. Our BASIS 60-ECO horizontal cartoner offers a compact and reliable solution. The machine was presented as an exhibition machine at a trade fair and is now available for sale. The total length including conveyor is only about 4 meters, making it ideal for facilities with limited space. The machine can process up to 60 cartons per minute. - Flexible product infeed adaptable to different products - Optional automatic product timing system - Carton size up to 220 mm (L) × 120 mm (W) × 400 mm (H) - Siemens PLC control and Siemens servo drives - Nordson hot-melt gluing system Ijdpfxsmftm Ne Abcjap Customers are welcome to visit our facility in Germany to test the machine with their own products and set up the system according to their needs. The price is negotiable. We also offer a wide range of horizontal and vertical cartoners as well as flow-wrapping machines.

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Iaodpfx Aoytr Swsbcjp Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Year of construction: 2012, condition: repair required (used), functionality: limited functionality, Fully automated test bench for testing fuel cell components Max. output 500 W (max. current: 100A, max. voltage: 35V) Gases can be temperature-controlled, humidified and pressurized; nitrogen purging available Anode: 0.04-2 Nl/min hydrogen, cathode: 0.1-5 Nl/min air or 0.02-1 Nl/min oxygen Iaodpfx Aoytr R Hsbcop Includes power cable, proprietary Testwork® software from the manufacturer, measurement PC Central control unit (PLC) defective

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, Material testing device for tensile and compressive strength testing Includes various spare parts, workpiece holders, spirit level, and CDs for the software Iasdeytrqyopfx Abcjp

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, Rated voltage: 100V AC±10% Power consumption: 340VA Rotary microtome The LEICA RM2155 is a robust, fully motorized rotary microtome designed for the precise production of thin sections from paraffin- or resin-embedded samples for histological, pathological, and materials analysis applications. The instrument combines motorized automation with manual fine control, ensuring reproducible sectioning quality even at high throughput rates. Iajdpfsytrpvox Abcop Technical features: - Motorized sectioning with adjustable speed and motorized coarse advance, optimizing workflow for routine and demanding specimens. - Adjustable section thickness range from 0.5 µm to 60 µm with fine increments to accommodate varying material requirements. - Specimen advance: 27 mm via stepper motor - Vertical stroke: 70 mm - Maximum sectioning range without retraction: 65 mm (without specimen orientation) - Maximum sectioning range with retraction: 60 mm - Specimen retraction in motorized cutting mode: 10, 30, 70 µm (adjustable depending on speed, can be deactivated) - Specimen retraction in manual cutting mode: 5, 10, 15, 20 µm (can be deactivated) - Movability of knife holder base: N/S travel ±25 mm, E/W travel ±20 mm - Maximum specimen size (WxHxD): 50 x 60 x 40 mm - Specimen orientation: horizontal 8°, vertical 8°, rotation ±90°, trimming steps 5, 15, 30 µm - Electric coarse drive: 900 µm/s Cutting motor: - Cutting speed: 0; 0.5 – 420 mm/s - Return stroke speed: approx. 120 – 420 mm/s Application areas: Production of consistent tissue sections for microscopic analysis in histology, pathology, neuropathology, as well as in materials science investigations; suitable for both research and routine laboratory environments with high demands on sectioning precision and reproducibility. The LEICA RM2155 stands out for its technical reliability, precise sectioning performance, and versatile application possibilities, making it a long-term investment for demanding laboratory processes. Including: power cable, knife holder base, knife holder NZ, standard chamber, foil chamber, carbide knife (16 cm), manual

Condition: used, Extraction system, central extraction system, room air filter system ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of construction approx. 2005 Volume flow approx. 5000 m³/h Extraction connection at filter inlet 1200 x 150 mm Exhaust air connection at filter outlet 400 x 300 mm Motor power 10 kW Iasdpfx Absicic Hocop Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter - Maintenance flap for filter change - Radial fan on top of the unit Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Very good condition

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Iasdpfx Absgd D U Eocep Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder - conveyor belts - testing stations - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg All in as-new condition – the system was never used in series production.

Condition: used, Flame Heating Device Roland Groß + Söhne GmbH Ring Burner for Preheating Weld Seams, Casting Preheating, etc. Model: 1 x 1" Ionization Serial No.: ALMA Year of Manufacture: 03/20 Connection Voltage: 230 Volt Max. Gas Pressure: 500 mbar Max. Air Pressure: 10 bar Max. Gas Flow Rate: 30 Nm³/h Max. Air Flow Rate: 300 Nm³/h Including 10 Different Flame Ring Nozzles - Flame monitoring by Hans Henning - Hinged ring nozzle made of two half-shells, inner Ø 310 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 400 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 490 mm, with hose quick-connect coupling and ignition device, central outlet Isdsdz Spwopfx Abcoap - Hinged ring nozzle made of two half-shells, inner Ø 500 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 590 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 800 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 990 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, arc length 1500 mm, with hose quick-connect coupling and ignition device, central outlet For heating pipes and vessels. For heating steel to welding temperature. Ideal for repair welds and the fabrication of welded assemblies from fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high velocity flame spraying. Gas heating for thermal coating applications.

Condition: used, Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbH Z-conveyor, sliding belt conveyor, conveyor belt, magnetic belt conveyor Type no.: MBF 326P31,75 Com. no.: 44489-10 Year of construction 2017 Slide width 300 mm Distance between permanent magnets 250 mm Insertion length approx. 3400 mm (up to body box) Slide-in length approx. 3900 mm (without superstructure box) Slide-in height 210 mm Insertion width housing 370 mm Insertion width threaded mounts for adjustable feet 410 mm Insertion width at body box 470 mm Conveying height - discharge height approx. 1040 mm Conveyor speed approx. 2 meters/min. Motor power belt drive 0.37 kW Iaedei Huzxepfx Abcep Mains connection 400 Volt, 50 Hz - Circulating chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Measuring range X-axis: 3,500 mm Measuring range Y-axis: 6,000 mm Measuring range Z-axis: 2,000 mm Type of input current: Three-phase current Equipment: Lighting, documentation/manual, type plate available Offer details Description Gantry measuring machine Manufacturer: Mora Model: U204-20-35-60 Measuring software: Manufacturer Gemodek, model MS10 Iasdpfjyr Simox Abcep Mobile control console Measuring and evaluation unit 2 PCs, manufacturer HP, models XW4300/Z220 2 monitors, 19"/24" Roller shutter cabinet, telescopic drawer cabinet by Lista, W 1,000 mm, 7 drawers Contents: Infrared measuring probe by Renishaw, model PH10M, calibration mandrel, accessories

Condition: used, Year of construction: 2005, functionality: fully functional, operating hours: 6,650 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 290 mm, workpiece weight (max.): 500 kg, number of slots in tool magazine: 15, controller manufacturer: Bosh Rexroth, overall weight: 5,500 kg, table length: 4,000 mm, table width: 1,300 mm, spindle motor power: 10,000 W, nominal power (apparent): 25 kVA, number of spindles: 1, rapid traverse Z-axis: 20 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rotational speed (max.): 24,000 rpm, rotational speed (min.): 1,200 rpm, spindle nose: HSK63F, spindle speed (min.): 1,200 rpm, tool length: 240 mm, tool weight: 6,000 g, Equipment: documentation/manual, rotational speed infinitely variable, ArtisX6 BRIEF DESCRIPTION. 1 10 kW working electrospindle; constant power in the range of 12,000 to. 24,000 1/min; working range: 1200–24,0001/min. Tool socket: HSK63F. Axis working ranges: X = 4600 mm, Y = 1,550 mm, Z = 400 mm, B axis = 180°, C axis= 360° Axis approach speeds: in the X/Y plane = 85 m/min; Z = 20 m/min Gateway: 290 mm 1 automatic disc tool magazine, 15-position. Max. tool length: 240mm, max. tool weight: 6kg L-shaped drilling unit, power 2.2 kW, spindle speed 4500 1/min, spacing 32 mm Machine table: wooden (high-quality waterproof plywood). Dimensions: 4000 x 1300 mm 2 x 4 pneumatically extendable base pins (fi 25 mm, stroke 115 mm). Tool set: yes (including some never used) Table division into two stations for alternating work 1 vacuum pump with a capacity of 250 m3/h and a surge tank with a capacity of 500 l Machine safety (EU standard): BUMPER bumper system (without the use of mats, photocells, etc.) Bosch Rexroth PNC control, BTV 16 industrial PC computer, Pentium III processor, RAM 256 MB, HD 10 GB, network card Profibus SERCOS drive control system Data input: USB-Stick, local network Operating system: Windows2000. ProEmbSys Touch screen CAD/CAM software: Alpha/CAM Movable control panel with manual control panel Remote diagnostics Interpolation: 5 linear, 2 ½ D circular Connected power: approx. 25 kVA Central lubrication Weight: 5.5 t Iaodpfxowh Aido Abcop Machine in very good condition, 100% efficient. Storage location: northern Poland

Condition: good (used), Year of construction: 2003, Filter rinsing tank Filtering takes place through an internal filter unit - Manufacturer: Atlantik GmbH Iodpfsiw Eafex Abcsap - Model: 30.701.31.15100 - operating pressure: 10 bar - filtered grain size: 6.0 µmm (micron mm) - Overall dimensions: 1050 x 1150 x 1620 mm - Capacity: 425 L - Electrical data: 250V, 5A, 50/60Hz - Year of manufacture: 2003

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, input current: 21 A, type of input current: DC, volume flow: 6,045 m³/h, overall weight: 1,100 kg, ALKO ECO JET 60/5 HD EXTRACTION UNIT Sawdust extraction, dust extraction, self-cleaning negative pressure filter, ALKO ECO JET Iajdoyrqnzspfx Abcop The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Ideally suited for all types of dry dust in various technological processes. The filter bags can be exchanged according to requirements and intended use.

Year of construction: 2026, condition: new, The equipment is generally considered project stock or, depending on availability, can be offered as a demonstration machine. Application: Accurate dosing of free-flowing products in precise quantities. Scale Features - Easy operation - Fast and uncomplicated cleaning - Low maintenance requirements - Tool-free assembly and disassembly of all product-contacting format parts - Low maintenance requirements - Corrosion-resistant stainless steel construction (1.4301) - Entire control system integrated within the machine housing - Continuously adjustable vibration system for optimal product flow - High accuracy through combination weighing Technical Data - Number of weighing heads: 10 - Weighing hopper volume: 2.5l - Weighing range: 10 - 1000g / 2,500g - Accuracy: ±0.2-1.5g - Speed: 60 bags/min (depending on product) - Control panel: 7" touchscreen display - Power: 1kW / 230V / 50Hz - Dimensions (LxWxH): 1620mm x 1100mm x 1110mm - Machine weight: 380kg Iedpfxsq T R Sbe Abcsap

Year of construction: 2026, condition: new, The equipment is generally project-spec goods and, depending on availability, may also be offered as a showroom/demo machine. Application: Accurate dosing of free-flowing products. Scale Features - User-friendly operation - Fast and easy cleaning Iaodpohuahcsfx Abcsp - Low maintenance requirements - Tool-free (dis-)assembly of all product-contact parts - Low maintenance effort - Corrosion-resistant stainless steel design (1.4301) - Fully integrated control system within machine housing - Continuously adjustable vibration system for optimum product flow - High accuracy through combination weighing Technical Data - Number of weighing heads: 10 - Weighing container volume: 1.6 l - Weighing range: 10 - 1000 g / 2,500 g - Accuracy: ±0.2-1.5 g - Speed: 60 bags/min (depending on product) - Control panel: 7" touch screen display - Power supply: 1 kW / 230 V / 50 Hz - Dimensions (LxWxH): 1,620 mm x 1,100 mm x 1,110 mm - Machine weight: 380 kg

Condition: new, Year of construction: 2026, The product is generally project-based or, depending on availability, offered as a showroom machine. Description - Optimal price-performance ratio - Easy to operate and clean, low maintenance requirements - Made from 1.4301 (stainless steel) - Color touch display - Operating software in German - System speed: 20-30 bags per minute, depending on product and fill weight Iodpjq Umuuofx Abcjap - Various bag sizes can be processed within defined size ranges. Simple manual adjustments must be made for each size change. Technical Data - Bag type: Doypack with zipper - Bag dimensions (LxW): 130-330mm x 100-200mm - Output rate: approx. 25-30 bags/min - Power: 4.5kW / 400V / 50Hz - Air requirement: 0.4 m³/min - Dimensions (LxWxH): 2200mm x 1100mm x 1400mm - Weight: approx. 800kg Process 1. Doypacks are loaded in the cassette compartment 2. Bag picker removes the bag (via suction device) 3. Bag is brought to the filling position (bag monitoring) 4. Bag is opened with the zip opener 5. Bag is filled and securely held by a dedicated gripping system 6. Depending on configuration, the bag contents may be compacted or gas flushed/vacuumed, etc. 7. Bag and zipper are closed and sealed 8. Bag discharge

Condition: as good as new (ex-display), From checkweigher to filling scale The single-head weigher is the most cost-effective solution for partially automating manual filling. With reproducible accuracy, the filling speed can be significantly increased. Features of the weigher - Simple operation and cleaning - Low maintenance requirements - Parts in contact with the product suitable for food (1.4301, NBR) - Operation via a 7" touchscreen - Technical documentation from regional partners - Coarse/medium/fine flow for precise weighing results - Infinitely adjustable vibration system Iaedpfshuah Dsx Abcsp - Purely electrical operation possible Technical data - Number of weighing containers: 1 - Weighing hopper volume: 4.5 liters - Volume hopper: 20 liters - Weighing range continuously adjustable between 20 and 3,000 grams - Accuracy: 0.5-3g depending on product - Speed: up to 15 weighings per minute, depending on product, set weight and desired accuracy - Power: 0.7kW / 230V / 50Hz - Dimensions: 860mm x 570mm x 920mm

Condition: new, Year of construction: 2026, The item is generally a project-based product or, depending on availability, available as a demonstration machine. The purpose of the labeller is to fully automatically label a cylindrical product. Description - Machine materials: 1.4301 and anodised aluminium alloy - Control via Siemens PLC + HMI - Cylindrical products from Ø20mm to Ø110mm - Accuracy: ± 1 mm (excluding product and label faults) - Technical documentation provided via regional partners Label roll Iaodoq U Sihjpfx Abcep - Inner diameter: 76 mm - Outer diameter: