Used Susemihl Gmbh Maschinenfabrik for sale (69,835)

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (min.): 12,000 rpm, spindle speed (max.): 36,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Machine rotary table - ø 800 mm Ppjdpox S Etmefx Afhel Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: new, Year of construction: 2025, feed length X-axis: 80 mm, feed length Y-axis: 80 mm, feed length Z-axis: 60 mm, Perfect for: Applications in model and mold making, as well as milling of other materials – a versatile powerhouse with a rapid traverse of 80 m/min Materials: Plastics, composites such as CFRP / GFRP, model-making materials, aluminum Industries: Automotive, aerospace, transport & logistics, leisure industry, sanitary equipment, boat building, automation _____ Reference number: 1210 Available from: immediately CNC machine type: 5-axis CNC milling machine G-S-F/UNI (35-15) Spindle data: 13 kW / 10.3 Nm; 12,000-24,000 rpm; HSK F 63 Ppjdpfx Ajx S Eqlsfhjl Rapid traverse X/Y/Z: 80/80/60 m/min Workpiece dimensions X/Y/Z: 3500 x 1500 x 700 mm Control: SIEMENS – Sinumerik One with hand terminal HT 2 Tool changer: 10 tools Tables: 1 table Vacuum system: yes Tool breakage and length monitoring: Renishaw TS 27 R Other: on request Year of manufacture: 2025 Condition: new

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, RESERVATION – For sale: Used compact G2000 with Mini Rex Futura. This divider and rounder is the ideal solution for both small-scale businesses and medium-sized bakeries. The unit is currently undergoing maintenance—necessary parts are being replaced at our Cream Serwis facility in Poland. DEVICE DESCRIPTION • Fully automatic, compact roll production line • Built around the Mini Rex Futura divider-rounder (2014), rotary version • Two-row operation Ppjdpfxsx Hyk Aj Afhol • Manual product discharge from the outfeed conveyor • Proofing time: approx. 6 minutes at a capacity of 2,000 pcs/hour • Stamping station with easily interchangeable tools • Integrated module for folding, elongating, and flattening • Capacity: from 1,800 pcs/hour up to 2,500 pcs/hour • Weight range for stamped rolls: 38–80 g dough piece; for unstamped rolls: 38–130 g • Stamping patterns: Kaiser roll, GB roll • Compatible dough types: wheat, graham, yeast dough, doughnuts, etc. • Single-operator design You are welcome to inspect the machine at Cream Serwis in Prudnik, Poland. For more information, follow us on our social media channels #CreamSerwis

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, !!! RESERVATION !!! FOR SALE: used Artisan SFC – dough divider with seeder. The Artisan dough divider by Koenig is a professional bakery machine designed for accurate and gentle dividing of dough. The device is an ideal solution for both very small businesses and medium-sized productions/bakeries. It ensures high weight accuracy and product consistency, making it ideal for the production of rolls. The machine operates fully automatically. The device has undergone a complete overhaul carried out by our service – Cream Serwis in Poland. Product description: Capacity: approx. 300 kg of dough per hour. Dough with up to 80% water content. Psdpox I A Nwefx Afhspl Dough belt speed max. 1.5 m/min. Dough belt width up to 170 mm. Quick row setting for easily movable rotating blades. Option to add: a double-seeder Steel construction If you are interested in our offer or need more details – please contact us.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 118413, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. Ppsdpfx Aoydqk Hefhjl No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Year of construction: 2015, operating hours: 8,286 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: Drymex S 5, Beautiful, robust drying system consisting of 2 units, 1 large stainless steel drying chamber with perforated floor, including piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food products (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), permitted for indoor use only. The individual segments of the perforated floor can be lifted up separately for cleaning. Excellent condition, very solid construction. Dimensions: Units – 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301. Unit 1: Year of manufacture 2012, Unit 2: Year of manufacture 2014, Drying chamber: Year of manufacture 2015. Price negotiable. Podpfx Afeyffqqshjpl

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 6,000 kg, total length: 4,60,000 mm, total width: 4,000 mm, total height: 4,300 mm, Year of construction: 2024, operating hours: 300 h, type of input current: three-phase, With shredder, centrifuge, and big bag filling station. Includes spark detection and extinguishing system. Approx. 300 operating hours, year of manufacture 2024. Suitable for stainless steel, nickel alloy, and titanium. Throughput capacity up to 1 ton/hour, depending on material. Total connected load: 83 kW. Overall length: 46 m. Height: 6.2 m. Price on request. Available at short notice. Location: Germany. Ppedpsq Nmw Iofx Afhjl

Year of construction: 2004, condition: excellent (used), Drive power: 250 kW Psdpfxjuqyr Es Afhjpl Rotor length: 1600 mm Rotor diameter: 1200 mm Infeed opening: 1500 x 750 mm / 1500 x 600 mm Wear parts new, main motor newly mounted. Subframe, hydraulic unit, Including control cabinet and operator panel, Excellent condition, ready for operation Total weight approx. 18 t

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,985 h, machine/vehicle number: L18_1463, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser type: diode laser, laser source manufacturer: CleanLaser, laser source model: CL 300, laser hours: 721 h, laser power: 300 W, laser wavelength: 1,064 nm, working length: 500 mm, working width: 900 mm, working height: 40 mm, compressed air connection: 6 bar, overall weight: 2,300 kg, total length: 4,500 mm, total width: 3,300 mm, total height: 2,215 mm, year of last overhaul: 2024, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, The system on offer is a laser cleaning cell manufactured by cleanLASER (model cleanCELL 2220), designed for industrial cleaning applications. In our case, it was used for cleaning stainless steel parts prior to adhesive bonding. The cell was in operation until the first quarter of 2024. The cell is equipped with a 300-watt diode-pumped ND:YAG laser, enabling precise and contactless surface cleaning. Components & Features: - Workstation: The cleanCELL 2220 features an X-Y-Z axis system for precise laser head positioning, two workstations, and six workpiece carriers. - Conveyor System: A BOSCH Rexroth conveyor system ensures the transportation of workpieces. - Peripheral Equipment: The unit includes a TEKA extraction system (LFE-301) for removing particles and a KLH cooling system for laser temperature regulation. - Safety: Full enclosure ensures the system meets Laser Safety Class 1 during operation. A spark detection system is also integrated. Ppedsxxvvispfx Afhol Documentation: Documentation can be provided upon request. Maintenance & Condition: The system was serviced annually, with the last maintenance performed on 05.01.2024. In the past, the resonator was replaced under warranty due to a loss in power output. Currently, the system has been relocated from its original position due to space constraints and is not connected to any power supply. Spare Parts: The system comes with a spare parts package containing various valves, timing belts, filter cartridges, desiccant, activated carbon filters, etc. Handover & Collection: Handover of the item takes place at the seller's business premises. After clarification of the technical details regarding disassembly, the item will be available for collection at that location. Disassembly and transportation are to be carried out by the buyer at the buyer's own expense and risk. The buyer is required to comply with the “Instructions and Regulations for External Companies” (information available upon request). The seller will issue an invoice based on the signed purchase contract. Handover of the item will occur upon receipt of a payment confirmation.

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Psdpfsu Th S Sox Afhepl Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The can press was completely overhauled in our workshop. The press is in a very good condition, see the functional video after the overhaul and is sold with the 12 months OBM parts warranty. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, BROWARY & DISTILLERIES Sp. z o.o. has been providing professional consulting, design, and implementation of beer and distillate production lines for many years. We produce private label products for our clients and automated drink dispensing systems. Our company’s strength lies in our highly qualified and experienced team of engineers, enabling us to offer comprehensive turnkey project execution. To date, we have designed and commissioned 28 craft breweries and 3 craft distilleries in Poland, produced over 200 private label craft alcohol brands for our clients, and installed 30 DRINK WALL automated drink dispensing systems in hotels and restaurants. We are pleased to offer you a used SALM brewpub brewery. Since 1924, SALM has been producing complete brewing systems. This brewery was manufactured in 2023 for a client in Bucharest and has only brewed 5 batches to date, which allows us to consider the offered installation as practically brand new! The brewery is in perfect technical and visual condition. Below is the full technical specification of the offered brewery: Annual production capacity: 1,100 hl of beer 1. Two-vessel brewhouse, 5.5 hl, stainless steel, A-frame design with Salm Brewmatic 02 computer control system – 1 unit. 2. Copper cladding on the mash tun and lauter tun’s cylindrical sections. 3. Stainless steel brewhouse platforms – 2 units. 4. External wort boiling kettle with atmospheric gas burner, powered by natural gas or propane – 1 unit. 5. Vapour condenser for brewhouse, mash, and lauter tuns, stainless steel, with built-in injection condenser and fan for odorless operation and DMS removal – 1 unit. 6. Two-roller malt mill – 1 unit. 7. Wort cooler – 1 unit. 8. Mains water chiller (for water above 10°C) – 1 unit. 9. Whirlpool – 1 unit. 10. Mobile beer pump – 1 unit. 11. Wort aeration system – 1 unit. 12. Oil-free air compressor – 1 unit. 13. Glycol cooling system – 1 unit. 14. Hot water tank, stainless steel, double-walled with PU insulation – 1 unit. 15. Brewhouse ladder – 1 unit. 16. UNI tanks, 11 hl, double-walled, 100 mm PU-insulated, built-in cooling jackets, stainless steel 1.4301, 1.0 bar, built-in CIP – 6 units. 17. TÜV certification for the above 6 UNI tanks, with a nameplate on each. 18. Serving tank for finished beer, 3.0 bar, capacity 10 hl, stainless steel 1.4301, PU foam insulated, water-jacketed, horizontal on a frame – 4 units. 19. Electronic temperature control for each UNI and serving tank – 10 units. 20. Control cable with protective hose and screw connection for each UNI and serving tank – 10 units. Ppjdpfx Ajx Aky Djfhel 21. Full set of piping and fittings for installation on a single surface – 1 set. 22. Set including 1 beer hose (22 m) with fittings and a mini-laboratory. The brewery has a type approval from the Central Office of Measures in Warsaw. On request, we can arrange transportation of the brewery from Bucharest to any country of your choice and handle installation. We will gladly send you more photos, a presentation video of the brewery, and a profitability calculation for running your own brewpub via email.

Year of construction: 2025, operating hours: 5 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2025112701, Aluminium incline conveyor with substructure including leveling feet and machine feet for compensating uneven surfaces - Feed height: 500 mm - Inclined section: 4,500 mm - Discharge height: 3,000 mm Design: Aluminium construction - Reinforced triple profile 135x45 mm - Continuous galvanized discharge sheet, 2.0 mm thick Drive drum + return drum made of S235 steel, welded and machined Ø150x620 mm, crowned surface, shaft fixed with pillow block bearings. Drive: Inline geared motor 1.10 kW, belt speed 0.77 m/sec Connection: 230/400 V, 50 Hz, protection class IP54 Drive pre-wired up to terminal box (Commissioning must be carried out by qualified electrical personnel) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm Endless high-frequency-welded with stepped joint Belt material: 2-layer, particularly cross-stable 2 pcs. corrugated sidewalls, 80 mm high, 50 mm wide, edge-aligned, high-frequency welded 18 pcs. T60 cleats, 430 mm long, spacing approx. 508 mm, centrally welded on Belt material: 2-layer, particularly cross-stable Due to the corrugated sidewalls on both sides, the usable belt width is reduced: Usable width: 500 mm, as follows: (Top view) Transverse arrangement: 50 + 500 + 50 mm Podpfsydb Rwox Afhjpl

Condition: new, Year of construction: 2025, functionality: unexamined, machine/vehicle number: 10013174, A damaged industrial vacuum cleaner is being offered for sale. - Manufacturer: P. Ries GmbH, CH Psdpeyaqc Ijfx Afhjpl - Type: 250 D 2.2 kW - Year of manufacture: 2025 - Weight: 130 kg net Damage: The unit appears to have toppled over. The housing is dented and deformed in several places. No information is available regarding functionality. The unit is stored on a wooden pallet, with no external packaging. Sale: ex stock, without warranty or liability.

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12-562, overall weight: 900 kg, workpiece diameter (max.): 40 mm, spindle diameter: 54 mm, type of input current: three-phase, roll diameter: 150 mm, spindle speed (max.): 80 rpm, spindle speed (min.): 10 rpm, total height: 2,150 mm, total length: 1,200 mm, total width: 800 mm, roll width: 80 mm, year of last overhaul: 2026, Equipment: documentation/manual, We offer this factory-refurbished thread rolling machine RWT 12X FR, year of manufacture 2013. Directly from the manufacturer! Machine type: RWT 12X FR Rolling force: 12 t Power: 5.5 kW Year of manufacture: 2013 PLC: Siemens S7-313c HMI: Siemens OP7 Frequency inverter: Siemens Micromaster 440 Speed: 10–80 rpm, stepless adjustment Max. tool width: 80 mm Rolling spindle diameter: 54 mm Rolling die diameter: max. 150 mm Suitable for plunge and through-feed rolling. Condition: very good, used, workshop-refurbished by the manufacturer If you have any questions or need further information, please write us a message or call us. Ppsdpfx Afeydkb Sohjl

Year of construction: 2023, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: N.A., Installed, unused CIC 600 inverting filter centrifuge made of Hastelloy C22, 2.4602. The centrifuge was delivered and installed in 2023, but this system, along with much of the other equipment, has never been put into operation. The centrifuge features a drum diameter of 600 mm, a nominal capacity of 52 liters or 65 kg, maximum drum speed of 1940 rpm, maximum centrifugal acceleration of 1260 (g), housing material 1.4571, product-contact parts made of 2.4602 — identical to Heinkel centrifuges. Scope of supply: Ppedoyffr Uopfx Afhel a) CIC 600 inverting filter centrifuge b) Support frame c) CIP system integrated into the main unit d) Quick-release front housing, tool set included e) Inertization pressure monitoring integrated into the main system f) Solids discharge valve g) Flooding function h) Washing filter, including coating Technical details are available on request. Please contact us if you would like a written offer. Dismantling, packaging, and loading onto a truck will be organized and supervised by Cycron GmbH. This ensures that all work is carried out to the highest professional standards. For further questions or to get in touch, please contact us at any time — we look forward to hearing from you. Cycron GmbH, Switzerland

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left Ppjdjttah Rjpfx Afhsl → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 Podstr U Hlepfx Afhopl ---- For the production of pipe geometries with bending radii from 1.5xD → Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity: pipe 30 x 30 x 3 mm → Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Pipe insertion length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system. Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → 1.5 kW servo drive for the bending axis → Adjustable speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Feed servo drive → Rotation servo drive → Three-jaw chuck for locking the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation → Data transfer via LAN or USB network → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle. Power consumption: 400V 16A Dimensions: L: 2.3 m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm Podpfx Asg Dvdcjfhjpl - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: new, functionality: fully functional, Year of construction: 2025, Manual Pipe Bender HRB-3D 850 for bending pipes and solid material up to a maximum of 12 mm Precise positioning and repeatable bending are ensured by three battery-operated digital displays that precisely show the bending angle, pipe feed, and pipe twist. - 80 mm three-jaw chuck - Feed stop system Ppedpsttagdofx Afhjl - Feed length approx. 850 mm The manual pipe bender should be permanently mounted on a table or frame (not included). We would be happy to provide you with a detailed quote if you send us your complete company address, email address, and contact details.

Condition: new, Year of construction: 2025, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm Ppsdpfx Asgu Nmhefhsl - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older machine

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Ppedpfxox Ebzqj Afhsl Made in Germany The pictures show you an older bigger machine

Condition: used, To ensure the long-term performance, precision, and operational reliability of your sheet metal processing machines, it is essential to carry out regular maintenance, repair, and inspection procedures in accordance with manufacturer specifications and legal requirements. Our qualified service technicians perform these tasks professionally and reliably. These include: • Maintenance work to ensure uninterrupted operation (cleaning, lubrication, inspection and replacement of wear parts) Ppjdpfxoydmhuj Afhol • Repairs in case of malfunctions or breakdowns, including fault diagnosis, refurbishment, and adjustment • Inspections in accordance with DGUV Regulation 3 and the Machinery Directive to verify safety and performance Upon completion of the work, you receive comprehensive documentation of all measures performed, including inspection reports and recommendations for any required follow-up actions. We will be happy to prepare a tailored quotation or schedule a maintenance appointment based on your specific operational requirements.

Condition: new, Year of construction: 2025, operating hours: 5 h, functionality: fully functional, fuel type: diesel, gearing type: automatic, number of seats: 1, operation weight: 2,000 kg, chain condition: 100 %, drive condition: 100 %, shovel volume: 0.025 m³, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, The HT20 PRO is a compact and powerful mini excavator in the 2.0-ton class, designed for professional applications in construction, landscaping, and municipal sectors. The machine stands out due to its robust build, precise hydraulics, and high operational reliability. The proven Kubota D902 3-cylinder diesel engine with 11.8 kW ensures smooth operation, low fuel consumption, and long service life. Thanks to its compact dimensions and adjustable undercarriage, the HT20 PRO is ideal for work on confined job sites. Technical Specifications: Engine: Kubota D902 3-cylinder diesel engine Engine power: 11.8 kW Low fuel consumption Very low vibration operation Hydraulics: Two-stage cast hydraulic pump Load-sensing hydraulic valve Drive motor with high/low speed Hydraulic hoses with steel wire reinforcement Work Equipment: Side-swing boom (left / right) Maximum digging depth: 1,995 mm Maximum digging reach: 3,130 mm Maximum digging height: 2,875 mm Maximum dumping height: 1,930 mm Undercarriage: Adjustable undercarriage Reinforced undercarriage made of manganese steel Heavy-duty cast iron counterweights Rubber tracks with three layers of steel cord Track width: 200 mm Dimensions: Transport length: 2,650 mm Overall width: 970 – 1,270 mm (adjustable) Ppedpfx Afex Hvvhjhsl Upper carriage width: 1,055 mm Overall height with ROPS canopy: 2,350 mm Track gauge: 770 – 1,070 mm Tail swing radius: 980 mm Minimum swing radius: 1,670 mm Gradeability: 30° Features: Fully enclosed cab Heating and air conditioning Excellent all-round visibility Ergonomic controls Joystick control LED work lights Comfort seat Reinforced steel construction Attachments / Implements (set includes): 20 cm trenching bucket with removable teeth 50 cm trenching bucket 100 cm grading bucket Hydraulic quick coupler incl. solenoid valves and hydraulic lines Optional: Hydraulic auger set up to Ø 300 mm (bits 150 / 200 / 300 mm + extensions) – SET PRICE 700€ RRP Maintenance & Warranty: Service intervals: every 250 operating hours or annually Warranty: 12 months across Europe Service & spare parts from stock in Rheda-Wiedenbrück (DE) Delivery & Availability: The excavator is available immediately and ready for operation. Europe-wide delivery can be arranged on request. This equipment complies with the highest safety standards and is CE certified. 2006/42/EC (Machinery Directive) 2014/30/EU (EMC Directive) 2011/65/EU (RoHS Directive) Interested? Contact us today! SET PRICE NET: €16,600 RRP Location: Rheda-Wiedenbrück

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Pjdpfsfifbbex Afhepl Delivery of the upper beam by feet clamping High segments in the upper beam Bending and lower beam are segmented too RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request

Condition: new, Year of construction: 2025, Capacity 2020 x 2 mm (ST37) Delivery of the upper beam by hand lever left + right Slanted segments in the upper beam Continuous bending and lower beam rails RAL 7016 paint Pjdsfifa Ajpfx Afhepl Manufacturing EU immediately available ex works Freight costs on request