Used Susemihl Gmbh Maschinenfabrik for sale (69,454)

Year of construction: 2026, condition: new, Extruder 30 mm - 28 l/d with die for weldingwire extrusion or profilextrusion with cooling bath with adhesive water blow-off Bljdpfx Afoi Tu U Ujhoc with haul-off with winder and guiding device

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. Bledeiv H Ekjpfx Afhsc We can also provide machines in other dimensions.

Year of construction: 2025, condition: new, Universal Testing Machine PM50 Force: 50 kN Crosshead Travel: 1200 mm Test Area: 400 mm Overall Height: 1817 mm Bledoydazuepfx Afhjc Weight: approx. 380 kg Resolution (Travel): 0.01 mm Test Speed: 0.03 - 1000 mm/min Return Speed: 1000 mm/min Load Cell: 50 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, which means that a "quick test" can be performed even without a PC. For tests requiring data storage and curve recording, our basic software enables you to control the machine and evaluate results. The software allows you to generate different test sequences and create test reports. Furthermore, you can export raw data for further processing in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips/accessories: Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2025, condition: as good as new (ex-display), Universal Testing Machine PM5 Force: 5 kN Traverse Travel: 520 mm Working Depth: 66 mm Overall Height: 1036 mm Weight: approx. 48 kg Position Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Load Cell: 5 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, enabling “quick tests” without the need for a PC. For testing procedures requiring data storage and curve recording, our basic software provides both control and evaluation functions. Blsdpfxeydanhj Afhoc This allows you to generate different test sequences and create a test report. In addition, raw data can be further processed in your own software. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2025, condition: used, Universal Testing Machine PM10 Force: 10 kN Crosshead stroke: 700 mm Test area: 400 mm Overall height: 1230 mm Weight: approx. 85 kg Blodpfjyc U Ugox Afhjc Travel resolution: 0.01 mm Test speed: 1–500 mm/min Return speed: 700 mm/min Load cell: 10 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for 'quick tests' without the need for a PC. For tests requiring data storage and curve recording, the basic software provides full control and evaluation capabilities. It allows you to generate various test sequences and create test reports. In addition, you have the option to further process the raw data in your own programs. Options: - Delivery and commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Grips and Fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Universal Testing Machine PM3 Force: 3 kN Traverse stroke: 1200 mm Working space depth: 66 mm Overall height: 1677 mm Weight: approx. 55 kg Travel resolution: 0.01 mm Test speed: 1-500 mm/min Return speed: 700 mm/min Load cell: 3 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick tests" to be conducted without a PC. For tests requiring data storage and recording of the curve progression, the basic software enables both control and evaluation. Bodpfx Afoyc U Rbjhelc The software allows you to generate various test sequences and create test reports. Additionally, you can further process the raw data in your own applications. Optional: - Delivery & commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: PM3, Universal Testing Machine PM3 (2020) Force: 3 kN Crosshead Stroke: 520 mm Working Depth: 66 mm Total Height: 1036 mm Weight: approx. 40 kg Travel Resolution: 0.01 mm Test Speed: 1–500 mm/min Bsdpfxoyc U Dbj Afholc Return Speed: 700 mm/min Load Cell: 3 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick testing" without the need for a PC. For tests requiring data storage and curve recording, our basic software provides the capability for control and analysis. This enables the creation of various test sequences and the generation of test reports. Furthermore, you have the option to further process the raw data in your own programs. Optional: – Delivery & Commissioning – DAkkS or factory calibration according to DIN EN ISO 7500-1 – Grips and fixtures: Compression plates, bending devices, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2025, operating hours: 10 h, condition: new, functionality: fully functional, overall weight: 800 kg, total length: 120 mm, total width: 900 mm, total height: 1,900 mm, laser power: 30 W, laser wavelength: 1,064 nm, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bodpfxsxuvk Ej Afhelc The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2025, condition: new, functionality: fully functional, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction Bsdowkpxkepfx Afhslc - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: new, Year of construction: 2025, functionality: fully functional, spindle speed (max.): 60,000 rpm, type of input current: AC, table length: 320 mm, table width: 560 mm, warranty duration: 12 months, working width: 560 mm, working length: 320 mm, number of axes: 3, The compact table version LOW MINI was specially developed for separating panels for small-format series, for small series with large formats, and for cost-conscious manufacturing. PCB materials with remnant web connections can be quickly and economically separated up to a size of 320 mm x 560 mm. The separation process is servo-controlled on all axes, with the milling drive from above. Switching the working area from small (320x280mm) to large (320x560mm) format is the highlight of the machine, thanks to its simple and uncomplicated operation. • Short cycle time due to shuttle operation • X/Y axes with linear motor technology • Panel fixation with pin technology • Flexible handling • PCBs with remnant web connections • Milling spindle adjustment with servo technology • Extraction device • Easy operation • Optimal price-performance ratio Bsdpfx Ajxmfdxofhslc Manual panel separation – flexible and cost-effective The concept of manual panel separation offers enormous advantages when it comes to flexibility and cost. Medium production volumes can be separated quickly and with low dust using the LOW MINI. Standard is 2-way loading with linear motor technology; to enlarge the working area, operation with a single shuttle is possible. The maintenance and user-friendliness combined with the excellent price-performance ratio allows for pleasant working conditions and also makes investing in this panel separator economically worthwhile. Axis speed 160mm/s Repeat accuracy 0.02 mm Separation accuracy 0.1mm Shank tool 0.8 - 2.4mm

Year of construction: 2025, condition: new, functionality: fully functional, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 20 Watt (Optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs Bledpfow Et Iljx Afhoc - marking of various materials

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) Bedsv Sybyopfx Afhjlc - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Bedpfxovtpq Hj Afhelc Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos and our function video. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, Pressure intensifiers, pressure medium converters, flow control valves -Operating pressure ranges -Hydraulic part (power part): 2 - 32 bar -Pneumatic part (control part): 3 - 10 bar -Volume flow: max. 16 l / min. at (6 bar inlet pressure, load-dependent) Blsdpfx Afod Al Hmehoc -min.: 2 cc/min. (Hydraulic oil with a viscosity of 21 mm³/s [3°E] at 50 °C) -Screw connections hydraulic side: G3/8 pneumatic side: G1/8 -Dimensions: 140/70/H68 mm -Weight: 1.1 kg

Condition: good (used), Converter, power supply, power supply unit Bedsffwpajpfx Afholc -Manufacturer: NorthTec GmbH -Type: VCC 3 -Number: 1x available -Price: per piece -Dimensions: 440/255/H135 mm -Weight: 3.1 kg/piece

Condition: repair required (used), Year of construction: 2011, operating hours: 104 h, functionality: limited functionality, machine/vehicle number: KN 10 39 17, type of cooling: water, rotational speed (max.): 1,500 rpm, tank capacity: 700 l, nominal power: 128 kW (174.03 HP), nominal power (apparent): 130 kVA, fuel type: diesel, output voltage: 400 V, output current: 188 A, output frequency: 50 Hz, motor manufacturer: Deutz, For sale is an AVS Aggregatebau GmbH diesel generator with the following key specifications: Manufacturer: AVS Aggregatebau GmbH Type: DW 130 De 15 M 12 Unit No.: KN 10 39 17 Year of construction: 2011 Technical Data – Complete Generator: Bedpsvtpv Nefx Afhjlc Power output: 130 kVA Voltage: 400V 50 Hz Speed: 1500 rpm Fuel tank: 700 L capacity Consumption: Up to 209 g/kWh, depending on load Operating hours: 104.8 h Detailed Components: Diesel engine Deutz BF6M 1013 E Engine No.: 11021228 Power output: 128 kW Speed: 1500 rpm Water-cooled Generator Mecc alte ECP 34-1L/4 Generator No.: 0001444400 Power output: 130 kVA Cos-Phi: 0.8 Voltage: 400 V Current: 188 A Frequency: 50 Hz The generator set has the following maintenance backlog: - Replace V-belt - Replace battery - Change coolant If dismantling and pickup are carried out by the buyer, the selling price is €18,500. If dismantling is performed by Blue Energy Group AG, additional fees will apply. The components included in the purchase price can be identified in the images.

Condition: used, Year of construction: 2006, functionality: fully functional, 2 compressed air dryers from Farrag are available for sale; further technical information available on request. Original price approx. €6,500. Model 1: SCARD 100 Model 2: SCARD 70 Year of manufacture: 2005 Bledpsvkdkiofx Afhec Power: 3.1 kW

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: F20iMW1 Faserlaser, workpiece weight (max.): 50 kg, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 1,760 mm, total length: 940 mm, overall weight: 250 kg, warranty duration: 6 months, height adjustment type: electric, scan area width: 175 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,064 nm, Equipment: cabin, Used fiber laser system for professional engraving, marking, and labeling of metals and plastics. Industrial quality, laser class 1, CE-compliant, Made in Germany. Technical Data - Laser source: IPG Ytterbium fiber laser (MOPA) - Power: 20 W - Wavelength: 1064 nm - Pulse frequency: 20–200 kHz - Beam quality: M² < 1.6 - Power supply: 230 V / 50 Hz Scanner & Optics - X-Y galvo scanner for 1064 nm - F-Theta lens f = 254 mm - Marking field: approx. 175 × 175 mm - Pilot laser (red) + 2 focus distance lasers for focus setting Machine & Work Area - Enclosed laser class 1 workstation - Combined sit/stand workstation - Motorized Z-axis (400 mm total travel) - Stainless steel worktable with 25-mm perforated grid - Extraction port DN50 (extraction unit not included) Control & Software - Industrial PC - SK CONTROL marking software (texts, logos, QR codes, variable data) - Ethernet, USB, RS232, Start/Stop for extraction - 23" monitor, keyboard & mouse Scope of Delivery & Safety - Complete machine with aluminum housing - Emergency stop, main switch, status indicators Blsdpfx Afjyctfdjhec - Circuit diagrams & operating manual - CE, TÜV-tested - Laser class 1

Year of construction: 2016, condition: used, functionality: fully functional, If you have any questions, you can contact me at any time by email. The facility is located in Laupheim. Blodpfx Asya H Uyofhec

Condition: used, functionality: fully functional, GIGAbend RAS 76.30 Bodpsx Hf E Ejfx Afhjlc - New images available: Listing images 1 to 3 are current pictures Listing images 4 to 5 are reference images of the machine’s configuration regarding table type - General technical data in mm: Bending length: 3200 mm Max. sheet thickness (400 N/mm²): 6.0 mm Max. upper beam stroke: 500 mm Upper beam clamping force: 120 tons Backgauge system (U-gauge): 10–4050 mm Machine dimensions (U-backgauge): 4620 x 5480 mm Base machine weight: 11 tons Backgauge + U-shape weight: approx. 1205 kg - Machine-related data: Motor operation: 400V, 50/60 Hz, 3-phase Year of manufacture: 2007 Condition: Refurbished – very good used condition Complete tool set 2-person operation from the front Second footswitch for operation from the rear (including light barrier for rear operation) 15" CNC color graphic touchscreen controller (Touch&More) CNC backgauge and hold-up system (10–1550) Backgauge system (U-gauge): 10–4050 mm

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 360034, Fine grinding machine for various workpieces made of different materials with opposing flat surfaces that need to be ground on one or both sides, e.g., wafers, valve covers For flat honing of workpieces with special height, parallelism, and flatness requirements. Technical data Blodpoir Ul Ssfx Afhsc Workpiece diameter: 5–220 mm Workpiece thickness: 0.6–80 mm Warranty 6 months legal warranty

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 381019, Machine type Planet V7 Machine no. 381019 Technical data Double Disk Grinding Workpiece diameter: max. 180mm Workpiece thickness: max. 100mm Condition Bedpfoi Hp U Eex Afhjlc Technical quality – very good Optical quality – like new Location Germany Warranty 6-month legal warranty

Condition: new, functionality: fully functional, power: 14.6 kW (19.85 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 2 l/h, fuel tank capacity: 20 l, color: orange, overall weight: 2,320 kg, operation weight: 2,200 kg, lifting height: 4,190 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.068 m³, suspension: other, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, The LT-25P is a compact, high-performance 2.5-ton mini excavator designed for professional use in construction, landscaping, as well as municipal and agricultural applications. Its robust build and advanced load-sensing hydraulics ensure efficient and precise operation even under demanding conditions. Thanks to the boom swing function, this machine is ideal for confined worksites and standard earthmoving or foundation tasks. Key Technical Features: - Boom swing for precise operation in tight spaces - Stable undercarriage (1,300 / 1,500 mm) providing excellent stability - Powerful Yanmar diesel engine - Load-sensing hydraulic valves for sensitive control - High-capacity axial piston pump - Hydraulic piston drive and swing motors - High digging and breakout forces - Durable rubber tracks Weights & Dimensions: - Operating weight: 2,200 kg - Operating weight with cabin: 2,320 kg - Bucket capacity: 0.068 m³ - Wheelbase: 1,500 mm - Track length: 1,940 mm - Ground clearance upper carriage: 220 mm - Counterweight swing radius: 670 mm - Undercarriage width: 1,300 / 1,500 mm - Track width: 230 mm - Track height: 50 mm - Transport length: 4,100 mm - Overall height: 2,440 mm Engine: - Model: Yanmar 3TNV80F - Displacement: 1.267 l - Engine power: 14.6 kW at 2,400 rpm (16.1 HP at 2,300 rpm) - Max. torque: 67.4 Nm at approx. 1,800 rpm - Engine oil capacity: 3.4 l - Fuel tank: 20 l Drive & Performance Data: - Travel speed: 2.0 – 3.8 km/h - Swing speed: 9.5 rpm - Max. gradeability: 30° - Max. drawbar pull: 23 kN - Ground pressure: 26.5 kPa Working Range: Bodpfx Asx Hg Etofhelc - Max. digging reach at ground level: 4,520 mm - Max. digging reach: 4,400 mm - Max. digging depth: 2,410 mm - Max. vertical digging depth: 1,930 mm - Max. dumping height: 4,190 mm - Max. dumping height: 2,880 mm - Min. turning radius: 2,130 mm - Bucket breakout force: 20 kN - Arm breakout force: 13.5 kN Dozer Blade: - Max. lift height: 260 mm - Max. lowering depth: 300 mm Undercarriage: - Track material: Rubber - Track model: 230 × 48 × 82 - Track tensioning system: Grease cylinder Hydraulic System: - Pump type: Axial piston pump - Flow rate: 67.2 l/min - Working pressure: 24.5 MPa - Hydraulic valves: Load sensing - Swing motor: Hydraulic piston motor - Travel motors: Hydraulic piston motors Equipment: - Boom swing - Fully enclosed cab with heating - Dozer blade - Joystick control - LED work lighting - Comfort seat - Rubber tracks - Hydraulic safety valves - Reinforced steel frame Accessories & Attachments – SET includes: - 25 cm trench bucket - 50 cm digging bucket - 100 cm grading bucket - Hydraulic quick coupler Optional: - Hydraulic quick coupler with tilt function – €1,400 RRP - Hydraulic auger set up to Ø 300 mm (augers 150 / 200 / 300 mm + extensions) – SET PRICE €650 RRP Maintenance & Warranty: - Service every 250 operating hours or annually - Warranty: 12 months Europe-wide - Service & spare parts available ex stock Rheda-Wiedenbrück (DE) Delivery & Availability: - Excavators available immediately - Europe-wide delivery can be arranged on request This machine meets the highest safety standards and is CE certified. - 2006/42/EC (Machinery Directive) - 2014/30/EU (EMC Directive) - 2011/65/EU (RoHS Directive) Interested? Contact us today! SET NET PRICE: €22,000 RRP Location: Rheda-Wiedenbrück

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 19 l, color: orange, overall weight: 1,800 kg, operation weight: 1,800 kg, lifting height: 3,570 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.04 m³, digging bucket width: 485 mm, Year of construction: 2026, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, The LT-20PRO is a modern, powerful, and versatile 2-ton mini excavator designed for continuous professional use in construction, civil engineering, and landscaping. Thanks to its robust steel construction, state-of-the-art load-sensing hydraulics, and compact dimensions, this machine is ideally suited for work in confined job sites as well as demanding earthmoving and foundation operations. The fully enclosed cab with integrated heating makes the LT-20PRO a true all-season machine, offering excellent operator comfort, safety, and productivity, even in cold, rainy, or windy conditions. Key Technical Features: - Swing boom for precise operation in tight spaces - Telescoping undercarriage 990–1,300 mm for maximum stability - Integrated travel motors with high/low speed - Load-sensing hydraulic valves – energy efficient & highly responsive - Axial piston pump with variable displacement - Slew drive with plunger-type rotation motor - Dual cast counterweights for superior stability - Wear-resistant rubber tracks 230×48×70 Weights & Dimensions: - Operating weight: 1,800 kg - Bucket capacity: 0.04 m³ - Wheelbase: 1,230 mm - Track length: 1,595 mm - Ground clearance (superstructure): 460 mm - Counterweight swing radius: 735 mm - Undercarriage width: 990 / 1,300 mm (telescopic) - Track width: 230 mm - Track height: 380 mm - Transport length: 3,600 mm - Overall height: 2,450 mm - Bucket width: 485 mm Engine: - Kubota D902-E4B-CBH-1 - Displacement: 0.898 l - Engine output: 11.8 kW at 2,300 rpm (16.1 hp) - Max. torque: 51.3 Nm at 1,800 rpm - Engine oil capacity: 3.7 l - Fuel tank: 19 l Travel & Performance Data: - Travel speed: 2.2 / 4.5 km/h - Slew speed: 9.5 rpm - Maximum gradeability: 30° - Maximum drawbar pull: 18 kN - Ground pressure: 29 kPa Working Range: - Max. digging reach at ground level: 3,840 mm Bledpfx Asx Hg D Aofhjc - Max. digging reach: 3,910 mm - Max. digging depth: 2,270 mm - Max. digging height: 3,570 mm - Max. dumping height: 2,480 mm Dozer Blade: - Max. lift height: 280 mm - Max. lower depth: 190 mm Hydraulic System: - Pump type: Axial piston pump - Flow rate: 64 l/min - Operating pressure: 23 MPa - Hydraulic valves: Load sensing - Slew motor: Hydraulic piston motor - Travel motors: Hydraulic piston motors - Hydraulic oil tank: 17.5 l Equipment: - Fully enclosed cabin incl. heating - Joystick control - LED work lights - Comfort seat - Rubber tracks 230×48×70 - Dozer blade - Hydraulic safety valves - Reinforced steel construction - Dual cast counterweights Standard Attachments & Accessories – SET includes: - 25 cm trenching bucket - 50 cm trenching bucket - 100 cm grading bucket - Hydraulic quick coupler Optional: - Hydraulic quick coupler with tilt function – €1,400 RRP - Hydraulic auger set up to Ø 300 mm (augers 150 / 200 / 300 mm + extensions) – SET PRICE €650 Maintenance & Warranty: - Service intervals: every 250 operating hours or annually - Warranty: 12 months Europe-wide - Service & spare parts ex-stock Rheda-Wiedenbrück (DE) Delivery & Availability: The excavators are available immediately. Europe-wide delivery can be arranged on request. This machine meets the highest safety standards and is CE certified. - 2006/42/EC (Machinery Directive) - 2014/30/EU (EMC Directive) - 2011/65/EU (RoHS Directive) Interested? Contact us today! SET NET PRICE: €20,500 RRP Location: Rheda-Wiedenbrück

Condition: used, Year of construction: 2009, We are offering this used ECS Eich Maschinenbau GmbH VS20/S4C sludge dewatering system, year of manufacture 2009 (modified). Not as erroneously listed (1990)! Manufacturer: ECS Eich Maschinenbau GmbH Model: VS20/S4C Year of manufacture: 2009 Design: Compact construction Length: 3800 mm Width: 1200 mm Bodpfx Ajyaccajfhelc Height: 2800 mm Clarification capacity: 180 l/min If you have any questions or require further information, please feel free to send us a message or call us.