Used Tensile Testing Machine for sale (70,753)

Condition: excellent (used), The Gleason BGT 200 H-W universal bevel gear testing machine is used for roll-off, load capacity, and run-out testing, as well as for measuring backlash on the flank, installation dimensions, and sensitivity to displacement in bevel gears with and without axial offset and axial angles from 0° to 180°. Bjdpfx Aj Afi Atjktjlp Gear sets with a maximum ring gear diameter of up to D=190.5 mm and hypoid gear sets with a pinion offset of 31.75 mm above and below the center can be tested. This testing machine is ideally suited for testing gear sets with small diameters and small modules under low load and with a minimum of backlash. The digital actual value display facilitates quick and precise adjustment and reading of the pinion installation dimension, ring gear installation dimension, and axial offset. The motorized drive of the pinion spindle, in conjunction with the frequency converter, allows for stepless adjustment of the pinion speed in the range of 0 to 3,000 [rpm]. The work area is secured by an electrically interlocked safety device. Technical data Largest gear diameter 190.5 mm Largest axial offset (hypoid offset) above (+) and below (-) the center ± 31.75 mm Largest / smallest distance from the machine center to the spindle nose, ring gear 177.8 / 0 mm Largest / smallest distance from the machine center to the spindle nose, pinion 177.8 / 25.4 mm Smallest / largest axial angle (steplessly adjustable) 0 to 180 ° Pinion and gear spindle: Diameter at the large end 45.65 mm Taper 1 : 24 Length of the taper 76.20 mm Diameter of the spindle bore, throughout 33.33 mm Speed range of the pinion spindle (steplessly adjustable) 0 to 3,000 rpm Weight 1,050 kg Dimensions L x W x H 500 x 1,100 x 2,000 mm

Year of construction: 1963, condition: used, functionality: fully functional, machine/vehicle number: D44L/7979, Offer Number: D44L/7979 Machinetype: testing machine Make: LOSENHAUSEN Type: UHP 40000 kp Constr. year: 1963 drawing force: 20 - 400 kN drawing distance max.: 1100 mm Pressure: 40 to Bodpfxjwi Syzo Aktolp Location: In our warehouse

Condition: excellent (used), max. wheel diameter 5 - 630 mm gear width 500 mm max. module 20 min. module 0,5 workpiece weight 350 kg Control IBH Macro max. workpiece diameter 630 mm clamping length 1050 mm total power requirement 1,8 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,0 x 0,7 x 2,4 m Spur gear software for internal and external gearing Blsdeyyqtzepfx Aktep Profile inspection standard crowning head - root relief K - profile Direction test standard crowning head - root relief K - profile graduation test Axis position correction for on-the-fly measurements up to 0.2 mm axis position error Snail software 3 carriers for gears, 1 carrier block, calibration device, Windows 7

Condition: used, Year of construction: 2007, max. wheel diameter 400 mm workpiece dia. 36-300/400 mm axis distance 135-290 mm spindle turning speed - stepless 3000 1/min dist. between centers 100-550 mm Control Siemens 840D Blsdpsy D T Suefx Aktsp weight of the machine ca. 4000 kg dimensions of the machine ca. 2000x3055x2788 mm Test method: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)

Year of construction: 2018, condition: like new (used), functionality: fully functional, TECHNICAL DETAILS Load cell: 2 pcs Xforce K Testing software: testControl II & testXpert III Load cell: Xforce K Measuring amplifier: DCSC module Documentation: available FURTHER TECHNICAL DETAILS - as per documentation, no guarantee Maximum test force Fmax: 50 kN Total height of the testing chamber: 1,534 mm Height of the lower testing chamber without attachments: 1,355 mm Height of the upper testing chamber without attachments: 1,369 mm An additional crossbeam is required for the upper testing chamber. Testing chamber width: 440 mm Load frame Load frame height without uprights: 1,714 mm Load frame height with uprights: 1,829–2,694 mm Load frame width without uprights: 760 mm Load frame width with uprights: 936 mm Load frame width with uprights and machine electronics: 1,124 mm Bljdpfxozpw Hds Aktjp Load frame depth: 140 mm Load frame depth without uprights and with drive base: 507 mm Load frame depth with uprights: 762 mm Load frame depth with uprights and machine electronics: 765 mm Weight and footprint Weight with machine electronics, uprights and typical attachments: approx. 300 kg Net footprint: 0.01 m² Load frame footprint: 0.713 m² Average sound pressure level at maximum speed at a distance of 1 m from the front of the machine: 61 dB(A) Drive Crossbeam speed: min. 0.0005 mm/min to max. 600 mm/min Crossbeam return speed: max. 1,000 mm/min Deviation from the set drive speed: max. 0.05% of the actual value Drive path resolution: 0.317891 nm Positioning repeatability without direction reversal: ±2.0 µm Adaptive control Cycle time: 1,000 Hz Power input Power connection plug CEE 7 (Schuko) Power connection: 230 V, 1 Ph/N/PE Power consumption at full load: approx. 2.3 kVA Mains frequency: 50/60 Hz Mains-side protection of the power connection cable: 16 A Safety functions The drive is equipped with a mechanical holding brake. When switching off, when the emergency stop is activated, or in the event of a power failure, the material testing machine stops at the current position. Unintended unloading due to energy stored in the specimen is prevented.

Condition: used, Year of construction: 1975, max. wheel diameter 160 - 1.600 mm gear width 250 mm max. module 20 min. module 1,5 Bjdpfx Ajt Hwptektolp total power requirement 1 kW weight of the machine ca. 3 t dimensions of the machine ca. m

Condition: excellent (used), max. wheel diameter 200 mm gear width 300 mm module 0,5 - 25 centre distance 750 mm Blodpfx Akey Umi Iotop weight of the machine ca. 0,2 t dimensions of the machine ca. 0,8 x 0,6 x 0,6 m worm testing roll-machine

Condition: excellent (used), Year of construction: 1975, Breaking device . bar material dia. 10 - 45 mm bar material stranggepreßte NE-Stangen weight of the machine ca. 3 t Bending and breaking device Blsdpfx Aoit Ev Tjktop simple and sturdy device to detect internal flaws in extruded non-ferrous metal rods +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2007, max. wheel diameter 400 mm weight of the machine ca. 4 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : Blodpfx Asxvdryoktjp KLINGELNBERG Single- and double-flank rolling test machine with structure-borne sound testing model R 30 year 2007 _____ Workpiece outer diameter min. / max. 36 / 300 mm Center distance between workpiece and counter wheel 135 - 290 mm Spindle speeds max. 3.000 rpm Drive torque max. up to 2196 rpm 20 Nm Drive torque max. 2196 – 3.000 rpm 14,7 Nm Spindle drive 4,62 kW Total drive approx. 10 kW - 400 V - 50 Hz Total weight approx. 4.000 kg Accessories / Special Features: • The machine is a universal rolling tester designed for the following testing procedures: o Single-flank rolling test o Double-flank rolling test o Structure-borne noise testing in single and double-flank contact o Helix testing in double-flank contact • WINDOWS PC control for measurement data acquisition and analysis with the NoisyS32 testing software • SIEMENS control panel for operating the machine and evaluating the test cycles • Complete enclosure with electrically monitored sliding doors • Attached control cabinet, various accessories, operating instructions • Unfortunately, the license dongle for activating the measurement software is currently missing. We hope to receive it from the supplier of the machine. Condition : very good condition ! Almost unused ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection gear machines – CNC or conventional - available. Please let us know your requirements.

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 0 mm max. module 34 min. module 1 total power requirement ca. 15 kW weight of the machine ca. 15 t Bodpfx Ast Hw Aajktolp dimensions of the machine ca. 4,20 x 2,00 x 2,90 m Extra große ZR-Prüfmaschine, Gegenhalter

Condition: used, Year of construction: 1980, max. wheel diameter 400 mm gear width NA mm max. module 5 min. module Blsdpet Hw Ebefx Aktop total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Manual Two Flank Gear Tester

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Bsdpfx Aozmt U Eoktslp

Condition: excellent (used), Module range: 0,1 – 2 mm Centre distance range: 25 – 85 mm Vertical stroke of master gear slide: 40 mm Diameter of measured gear, max. (clamped on arbor): 120 mm Diameter of measured gear, max. (clamped between centers): 80 mm Maximum distance between centers for clamping of measured part: 200 mm Blsdswkgr Ijpfx Aktop Weight of measured gear, max.: 0,5 kg Measuring force adjustment, manually adjustable: 0 – 8 N Standard master gear arbor, diameter: 12,7 mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH Bodpfoz Eh Egex Aktjlp

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 5 - 260 mm gear width: 400 mm max. module: 15 min. module: 0,5 gear hobbing diameter - internal: 30 mm max. helix angle: > 85 ° Aussenverz. Bjdjqvcnnspfx Aktjlp max. helix angle: > 45° Innenverz. Testing Range vertical: 400 mm dist. between centers: 5 - 600 mm table diameter: 260 mm max. table load: 100 kg speeds: 30 1/min total power requirement: 1,6 kVA weight of the machine ca.: 900 kg dimensions of the machine ca.: 200 x 1300 x 2150 mm CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.) *

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Bedpfx Akozg D I Aotelp NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Year of construction: 1995, condition: ready for operation (used), working width: 1,550 mm, inner diameter: 152 mm, rotational speed (distance/time): 13,000 mm/min, The machine cuts from roll to DIN A4 or A3 size sheets, stacking 100 sheets per box, as required in the office supplies market. The machine's output at 7-up across the 210 mm width is: in 1 hour: 250 A4 boxes filled with 100 sheets each. Bjdpfxey Ed Hfo Aktelp Possible materials: photo papers, inkjet films, OHP transparencies, self-printable business card cartons, PVC sheets for bookbinders as covers for brochures, matt-coated laser films for labeling, felts, and much more! The machine is still in daily operation, and can therefore be inspected and tested. We would handle dismantling, packing, and loading onto truck or into sea container at our cost... EXW.

Condition: ready for operation (used), The Klingelnberg PSR 500 U worm gear testing machine was designed as a universal machine for the flexible testing of worm gears and is used by manufacturers of gear and transmission technologies for the single-flanking rolling test process for worm gear sets (EFWP). Technical data: Max. worm gear diameter: 500 mm Max. spindle length: 500 mm Max. spindle diameter: 200 mm Center distance: 0 ... 400 mm Max. measuring speed: 60 rpm Braking torque: 2.5 Nm Max. worm gear weight: 150 kg Max. spindle weight: 50 kg Table diameter: 300 mm Machine weight: 800 kg Dimensions: 1500 x 1500 x 1600 mm The following parameters can be measured here: Bsdpfozxghvsx Aktelp • Flank deviations Fi', fi', fl', fk' • Flank clearance, runout, roundness (option) • Contact pattern with digital camera • Pitch deviation • FFT analysis, spectrum *Image shows the machine in its current condition as a retrofit/modernized unit. *Further information about the machine is available upon request.

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm Bljdpfx Akjvr Hf Eotep gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Bedpfx Akjz St Hwotslp Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, coolant, Low Volt light.

Year of construction: 2025, condition: new, functionality: fully functional, Cost-effective single-column, microprocessor-controlled tensile testing machine for tensile, compression and bending tests up to 3kN Comfortable Windows software for universal test procedures, simple tests can also be performed without a PC. Made in Germany Basic equipment: • Machine with sensor (optionally between 50N and 3kN) Bedpfx Aksd H S Hietelp • Accuracy class 0.5 • Windows based software • Warranty 2 years Optionally available: • Extensive gripping tools (mechanical, pneumatic and hydraulic), for example: pressure platens Screw and wedge grips bending grips Special designs according to customer specifications • extensometer • Temperature and climatic chamber • Windows software PM-Soft-Smart for universal use, freely programmable • putting into operation and training

Year of construction: 2025, condition: new, Cost-effective single-column, microprocessor-controlled tensile testing machine for tensile, compression and bending tests up to 5kN Comfortable Windows software for universal test procedures, simple tests can also be performed without a PC. Made in Germany Basic equipment: • Machine with sensor (optionally between 50N and 5kN) • Accuracy class 0.5 • Windows based software • Warranty 2 years Optionally available: • Extensive gripping tools (mechanical, pneumatic and hydraulic), for example: compression platens Screw and wedge grip bending fixtures Special designs according to customer specifications • extensometer / strain gauge: • Temperature and climatic chamber • Windows software PM-Soft-Smart for universal use, freely programmable • Commissioning into operation and training Bedpsd H S Rrefx Aktelp

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, wheel diameter: 400 mm, overall weight: 4,000 kg, distance between centers: 550 mm, spindle speed (max.): 3,000 rpm, controller model: Siemens 840 D, TECHNICAL DETAILS Max. wheel diameter: 400 mm Workpiece diameter: 36–400 mm Centre distance: 135–290 mm Max. spindle speeds (infinitely variable): 3,000 rpm Centre width: 100–550 mm Bedpfsywg Hxox Aktolp MACHINE DETAILS Control: CNC Siemens 840 D Dimensions & Weight Space requirement: approx. 2,000 x 3,055 x 2,788 mm Machine weight: approx. 4,000 kg EQUIPMENT Single-flank rolling test Double-flank rolling test Structure-borne noise testing Helical contact testing (double-flank contact) Use of up to 6 test carriages Highest test accuracy and repeatability Machine table with workpiece drive Swivelling pneumatic unit Spray lubrication (Type: Vogel) Oil mist extraction (Type: Elbaron)

Condition: good (used), Fountain industrial bagging machine, suitable for the automated weighing and packing of fresh produce and other food products into bags. Designed for use within a commercial food-processing/packing environment and suitable for integration with an upstream weighing or feeding system. Bodpfx Akjzzzm Eotslp

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Bsdpjw N S E Ajfx Aktolp Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data