Used Tensile Testing Machine for sale (71,136)

Condition: used, functionality: fully functional, Rotary testing machine for testing transformers 8 stations Todoyl Adzopfx Airjd Testing stations for: voltage, input/output current (mA), high voltage, pad printing Test adapters for all common EI transformers included

Year of construction: 2011, condition: used, functionality: limited functionality, machine/vehicle number: 8802L1280, We offer this used Instron 2527-113 / 104999 servo-hydraulic dynamic testing machine, model 8802, manufactured in 2011. Manufacturer: Instron Model: 2527-113 / 104999 Tedpfxezgvrte Airod Serial number: 8802L1280 Control type: Digital control electronics Force: 160 tons Working width: 1120 mm Stroke: 0 - 200 mm Stroke rate: 0 - 6000 1/min Table area: 800 x 560 mm Ram adjustment: 0 - 1100 mm Weight: 2.5 tons Space requirement (W x D x H): 1.1 x 1.2 x 3.6 m If you have any questions or require further information, please feel free to contact us.

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test bench is designed as a dual-mass vibrator. It consists of a vibration head, which is excited via an asynchronous motor with frequency control and an eccentric motor. The vibration head is located in the upper part of the machine and generates the dynamic amplitude. The vibration head is supported on the upper traverse via pre-tensioned coil springs and is guided centrally. The center load drive is located in the lower part of the machine and applies the static preload with the aid of a geared motor via a spindle drive. The test chamber is located above the mounting table and is bounded upwards by the adjustable traverse. The control of the test bench is carried out by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the test bench: Overall height of the test bench 1840 to 2240 mm Height of the machine table 1030 mm Width of the test bench 800 mm Depth of the test bench 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. class 1 (according to DIN EN 10002-3) Weight of the test bench approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAI 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (right-rotating field) Connection plug CEE socket, 5-pole, 16 A Tedpfx Aozii Awjirjd Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase with PE conductor and protective earth, right-rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent interference Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Ground resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Shimadzu Type: AG-X plus 20kN-50kN +750mm Dimensions: W 1206 x D 765 x H 2920 mm Technical data: Fmax: 50 kN Speed: 0.00005~1500 mm/min Accuracy: ±0.1% JIS B7742 Class 0.5, ASTM E2658 Class A Crosshead-table distance (mm) (tensile stroke)*3: 215 to 1940 (20 kN: 0 to 1535 mm, 50 kN: 0 to 1475 mm) Possible test width: 600 mm Frame stiffness: 180 kN/mm 710 kg Tjdpfxjzimkfe Airjd 200 V 4.5kVA/15 A + Accessories as shown in the picture Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Zwick / Roell Type: LTM10 Max. testing frequency: 100 Hz, depending on the amplitude Dynamic testing force in tension/compression: 10 kN Static testing force in tension/compression: 7 kN Piston stroke: 60 mm Positioning and repeat accuracy: +/- 2 µm Speed range: 1 mm/min - 1 m/s Testing space height without load cell: 1170 mm Weight with linear motor: 1065 kg (without control unit) Maintenance: according to maintenance specifications, partially performed by Zwick/Roell Accessories: screw chucks, software (TestXpert research) Connection: 400V 50/60 Hz 32A 3-phase/PE Condition: used Scope of delivery: (See image) Tjdpfxszh D R Ho Airod (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 1992, weight 5,5 t Table tip diameter: 35 mm Tip height above table: 75 mm Counterholder tip diameter: 50 mm Counterholder tip stroke: 40 mm Minimum center-to-center distance: 20 mm Minimum measuring height above table: 50 mm Maximum measuring height above table: 800 mm Table diameter: 500 mm Base circle diameter: 0–1000 mm Maximum rolling path: ±115 mm Maximum workpiece weight: 2000 kg X-axis: 230 mm Y-axis: 530 mm Z-axis: 750 mm Max. workpiece diameter: 1000 mm Software for new PCs: Windows 11 Todpezidz Isfx Airjd Bevel gear software, if desired, available only on Metrotek installations Additional information: - Machine calibrated according to DAKKS on November 19, 2017

Condition: used, machine/vehicle number: 5585HK1182, We are offering this used Instron 5585HK1182 universal testing machine for sale. Stroke: 1182 mm Pressing force: 25 t Dimensions (installation): 1.5 x 1.0 x 2.5 m Weight: 952 kg Control system: Instron Blue Hill Tedjzgv Etjpfx Airod If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, Zwick Type: HA 50 Dimensions: H 2685 mm x W 1040 mm x D 750 mm Footprint: 1600 cm² Technical data: Fmax: 50 kN Vmax: 1500 mm/s Working area height max. 1370 mm Working area width 565 mm Accessories: Tjdpjzil Uijfx Aired Kistler force sensor 50 kN via NI-Labview Hydraulic unit 280 bar Footprint: 415 cm² Clamping device / specimen holder available (Universal flange, high-strength jaws for specimen holder) Computer + testXpert R V6.0.0 software Condition: used Scope of delivery: (See image) Weight approx. 1200 kg without frame, etc. (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Year of construction: 2007, max. wheel diameter 500 mm Hypoid adjustment ±70 mm axial cross angle 90 ° Distance Y- 150 - 350 mm Distance Z-axis 120 - 340 mm turning speed range - stepless 0 - 5000 U/min max. torque on the spindle 57 Nm Tjdpeukitxofx Aired Cone 99,2 mm Pull-in force Tool clamping 23000 N Braking torque max. 93 Nm total connected load 20 kVA total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2,35 x 2,24 x 2,5 m

Condition: used, Zwick Type: Z30 Technical data: Overall height 2114 mm, width 748 mm, depth 580 mm Fmax: 30 kN Vmax: 125 mm/s Accessories: Extensometer ClipOn 13.5 mm Extensometer ClipOn 40 mm Computer + testXpert II V3.5 software Total weight approx. 500 Tjdpfx Aijzil Ucerjd Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: used, Instron Wolpert V-Testor 4562 Low-Load and Microhardness Tester High-quality and extremely robust low-load hardness tester from the renowned manufacturer Instron Wolpert, model V-Testor 4562 (V-Testor 2 series). These mechanical-optical precision instruments are known for their exceptional durability and reliability in material testing, metallography, and quality assurance. The device is ideally suited for hardness tests according to the Vickers method (HV) in the low-load range. Application area: It is typically used to determine the hardness of thin films, surface structures, small precision parts, or metallographic samples in laboratories and for quality assurance. Technical data & details: Manufacturer: Instron Wolpert GmbH Model: V-Testor 4562 Testing method: Vickers (low-load range) Optics: Integrated precision measuring microscope for evaluating the indentations Application area: Hardness determination of metals, thin films, and surface structures Tsdpfxjzniays Aired You can find more items – new and used – in our shop! International shipping costs available upon request!

Year of construction: 2026, condition: as good as new (ex-display), Universal Testing Machine PM3 Force: 3 kN Crosshead travel: 520 mm Working space depth: 66 mm Overall height: 1036 mm Weight: approx. 40 kg Resolution: 0.01 mm Testing speed: 1-500 mm/min Return speed: 700 mm/min Force sensor: 3 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a keypad, allowing for a “quick test” even without a PC. For tests that require data storage and a record of the curve profile, we offer you the option to control and evaluate the test using the basic software. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 Tsdpjd R Dpujfx Airsd - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) Todpfx Ajxxb Rreirjd 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2006, workpiece diameter 5 - 1.000 mm module range 0,2 - 25 helix angle < 90 ° Control Wenzel GearTec faceplate diameter 750 mm x-axis 1.200 mm y-axis 550 mm z-axis 1.000 mm total power requirement 6,5 kW Todsyvvlbjpfx Airod weight of the machine ca. 11 t dimensions of the machine ca. 3,30 x 3,15 x 2,70 m Software: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, TStat, TStylus, WMI, wingeco.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Universal Testing Machine PM3 Force: 3 kN Crosshead travel: 520 mm Working space depth: 66 mm Overall height: 1036 mm Weight: approx. 40 kg Stroke resolution: 0.01 mm Testing speed: 1-500 mm/min Cc7d2rmq Return speed: 700 mm/min Force sensor: 3 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for a "quick test" even without a PC. For tests that require data storage and recording of the curve profile, we offer you the option of control and evaluation with the basic software. This enables you to generate different test sequences and create a test report. Furthermore, you have the option of further processing the raw data in your own programs. Optional: Tjdpfx Aisfdzuperjd - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Tjdpfx Aiortrzdsrod Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Year of construction: 2006, workpiece diameter 5 - 1.000 mm module range 0,2 - 25 helix angle < 90 ° Control Wenzel GearTec faceplate diameter 750 mm x-axis 1.200 mm y-axis 550 mm z-axis 1.000 mm total power requirement 6,5 kW weight of the machine ca. 11 t dimensions of the machine ca. 3,30 x 3,15 x 2,70 m Todezkvvyepfx Airod Software: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, TStat, TStylus, WMI, wingeco.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Tjdpfx Aeznwu Soired Technical Specifications: - Laser Source Power: 3000 W (3 kW) - Sheet Dimensions (X x Y): 3000 mm x 1500 mm - Tube Length Capacity: 6000 mm (6U execution) - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: - Factory industrial water chiller unit - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: used, SincoTec Type: POWER SWING 20 kN POWER SWING 20 kN resonance testing system Sincotec Power Swing 20 kN resonance testing system Manufacturer's maintenance performed General information For sale is a used Power Swing 20 kN resonance testing system from Sincotec Test Systems GmbH. The testing system was used in a single-shift operation, and all maintenance work was performed regularly by the manufacturer. Special features: Robust construction for continuous operation Precise resonance testing up to 20 kN Manufacturer's maintenance available Ideal for research, testing, and development applications Technical data – Testing system Feature / Value Overall height of testing system 1215 mm (without clamping device) Width of testing system 2005 mm Depth of testing system 1205 mm Maximum force amplitude 10 kN Maximum total force ±20 kN Accuracy of measuring sensors min. Class 1 (according to DIN EN 10002-3) Technical data – Control cabinet Feature / Value Overall height of control cabinet approx. 1800 mm Height of tabletop 1080 mm Width of control cabinet 650 mm (narrow tabletop) / 1450 mm (wide tabletop) Depth of control cabinet 700 mm (narrow tabletop) / 800 mm (wide tabletop) Weight 152 kg (small tabletop) 187 kg (large tabletop) with (granite plate) 247 kg Conditions for the installation site Feature / Value Space requirement 4.3 × 3.0 m Required ceiling height 2.5 m Floor load-bearing capacity 234 N/cm² Mains conditions Feature / Value Voltage 400 V three-phase with neutral conductor and protective earth Phase sequence Right-rotating field Voltage fluctuations ≤ ±10 % Short-time dips < 20 ms Limits for sustained disturbances Radio interference level A according to VDE 0871 Frequency 50 Hz ± 1 % Protective earth / Grounding resistance < 0.3 Ω Connection and protection Feature / Value Voltage supply 400 V / 50 Hz (Right-rotating field) Connection plug CEE socket, 5-pole, 16 A Protection 16 A Weight of testing system approx. 3.6 t Max. weight clamping device 250 kg Condition: used Scope of delivery: (See picture) Tedozii A Depfx Airod (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Tedpfx Ajx D Tbmjirod Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Tedpfx Aiez Tf D Rjrod Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Year of construction: 2025, condition: as good as new (ex-display), Stand-alone machine, max. testing force 200 kN, most modern WINDOWS software (freely programmable test sequences), over 600 finished test results, Machine price WITHOUT clamping device as the final equipment is based on your requirements: included in the price: - Machine in working order - incl. load cell 200 kN (grade 05 from 2000 - 200,000 / grade 1 from 400 - 2000 N - Warranty 24 months - Software LabTest - meets and exceeds all expectations - without clamping tool - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Optional: - Mechanical clamping device - Hydraulic clamping tool - Bending tools - Druckplatten plates - Clip-on extensometer - Probe arm extensometer - Video extensometer - Laser speckle extensometer - Climate chambers - High temperature / hot draft furnaces Tsdpfx Aiecyamwerod ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.

Year of construction: 2025, condition: as good as new (ex-display), Max. Test force 100 kN, most modern WINDOWS software (freely programmable test sequences), over 600 finished test results, machine price WITHOUT clamping device - final equipment according to your requirements Included in the price: - machine in working order - incl. load cell 100 kN (grade 05 from 1000 - 100,000 / grade 1 from 200 - 1000 N - warranty 24 months - Software LabTest - unsurpassed flexibility, complete software (!) - without clamping tool - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Optional: - mechanical clamping device - hydraulic clamping tool - bending tools - compression plates Tjdpfx Aocxwq Rsirjd - clip-on extensometer - probe arm extensometer - video extensometer - laser speckle extensometer - climate chambers - high temperature furnaces ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.

Condition: excellent (used), max. wheel diameter 200 mm gear width 300 mm Tjdpfxsy Umi Is Airjd module 0,5 - 25 centre distance 750 mm weight of the machine ca. 0,2 t dimensions of the machine ca. 0,8 x 0,6 x 0,6 m worm testing roll-machine

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Universal Testing Machine PM3 Force: 3 kN Traverse stroke: 1200 mm Working space depth: 66 mm Overall height: 1677 mm Weight: approx. 55 kg Travel resolution: 0.01 mm Test speed: 1-500 mm/min Return speed: 700 mm/min Tsdpfxoyc U Rbj Airjd Load cell: 3 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick tests" to be conducted without a PC. For tests requiring data storage and recording of the curve progression, the basic software enables both control and evaluation. The software allows you to generate various test sequences and create test reports. Additionally, you can further process the raw data in your own applications. Optional: - Delivery & commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.